IBase warranty changes take effect???? Urgent..

Hi all,
I face a difficult where I need to change my iBase warranty database. I manage to grab the warranty information through the call function below. However, after I do the changes I still cant manage to see the effect in the IB53. The changes are not updating the particular iBase although I already call save. I have tried few save function module also no effect... Anyone can help me on this?
CALL FUNCTION 'COM_IL_API_CHANGE'
    EXPORTING
      iv_reltype               = 'IBCWTY'
      IV_ENQMODE               = 'E'
      it_link_attr             = <lt_link_attr>
data: lt_reltype type COMT_IL_RELTYPE_TAB.
data: lw_reltype TYPE comt_il_reltype.
lw_reltype = 'IBCWTY'.
APPEND lw_reltype TO lt_reltype.
data: lw_new type COMT_IL_ATTR_COMPLETE.
data: lw_old type COMT_IL_ATTR_COMPLETE.
data: lt_link    type COMT_IL_UPDDATA_TAB.
CALL FUNCTION 'COM_IL_API_SAVE'
   EXPORTING
     IT_RELTYPE            = lt_reltype
   IMPORTING
     ET_INTERLINKAGE       = lt_link
     ES_ATTR_TAB_NEW       = lw_new
     ES_ATTR_TAB_OLD       = lw_old
CALL FUNCTION 'CRM_IBASE_SAVE'.
Regards,
Mervyn

Hi,
if i made some changes to a workbook (e.g: change some conditions) on discoveror desktop,will them take effect at the same time on discoveror plus???When you save the report using the desktop the workbook in changed for all users including the Plus,
But in order to see the change in the Plus you will have to re-login to Plus.
This is since the workbook is saved to memory of the user's PC.
how and where can I make control for one user to access some workbooks and another user to access some other workbooks both on desktop and plus? (workbook accessibility control)Only the owner of the workbook can do that.
This is done in the desktop as well as in Plus.
In desktop go to the tool bar "File -> Manage Workbooks -> Sharing" then choose the workbook and share it with whom ever you like.
In Plus you can find it in the tool bar "File -> Manage Workbooks" then click on any of the reports and select the "Share" from the right.
You have to make sure that the shared user have access to the BA that the workbook is based on, and that the user have the privilege to use the desktop/Plus (this is done in the Administrator tool)
Tamir

Similar Messages

Making jsp changes take effect

I am slightly confused as to what changes require a server restart, as I
have tried changing jsp and some times that changes just don't take effect.
I have tried running in development and production mode and this makes
little to no difference.
Thanks in advance

Dan,
You can set the page recompilation check interval in weblogic.xml for the
web application that contains the JSP. See the WLS docs for details.
Sincerely,
Daniel Selman
"dan" <[email protected]> wrote in message
news:[email protected]..
I am slightly confused as to what changes require a server restart, as I
have tried changing jsp and some times that changes just don't takeeffect.
I have tried running in development and production mode and this makes
little to no difference.
Thanks in advance

Changes dont take effect in the view

Hi,
I am modifying the UI-Table which is editable.
What has to be done to show the current new content of the table on the view.
There is a calculation and the result will be inserted into the cost column.
Cleary how can I see that the changes take effect
I cant see the value in the view after modify command
data wa_kt type ZCBD_PURCHITEM.
Data: l_node type ref to if_wd_context_node.
l_node = wd_context->get_child_node( 'ZKAUF' ).
*l_node->get_static_attributes_table( importing table = lt_table ) .
l_node->get_static_attributes_table( importing table = WD_COMP_CONTROLLER->GT_KAUF_TAB ) .
LOOP AT WD_COMP_CONTROLLER->GT_KAUF_TAB INTO wa_kt.
wa_kt-COST = wa_kt-EKPREIS * wa_kt-MENGE.
modify WD_COMP_CONTROLLER->GT_KAUF_TAB from wa_kt transporting COST.
ENDLOOP.
regards
ertas

Hi,
Table binding........is the corret solution to have the new resutls to be shown....what it does is.Binding stores the latest information to the node.......
Check the tbale events......if there is ONENTER event you can write the same code ...for callucuations...bind the table again...........One thing to remember...this will only trigger when teh USER presses the ENTER key.....but on every ENTER event this code gets triggered..better keep a button for calculation and perform the code in this.......Sometimes the users are lazy to press ENTER everytime...
Regards,
Lekha.

Factory calender change in Production - Urgent !!!!

Hi,
I have a question about transporting the SAP calendar from Dev to PRD. I created a new factory calendar in DEV and want to transport it to QA and PRD. When I select the transport button I get a message saying that all calendars will first be deleted and then replaced.
1) The first question is "is there any way to transport just the calendar I created or do I have to transport them all?".
2) The second question is " If I have to transport all the calendars how does this affect the current applications and jobs that are scheduled using the calendars, will these jobs have to be reschedule using the new calendars or will the jobs be OK and get the calendar information at the time they run. Again I only created one new calendar all
the other calendars should be the same.
Thanks
Best Regards'
-Shiva.

Hi,
The Calender which you have created in SCAL is not Client Specific. If you change anything. Each change takes effect directly in all clients.
You cannot transport the calender directly to another client.
Communicate with abaper & Fico guys before you do this.
Reg,
Ashok
Rewards welcome.

Changes in iAS6.5's web.xml don't take effect

After the cust deployed his application he modified some parameters in
the web.xml file of his application. He then restarted the application
server after but the changes didn't take effect. Is this the
expected behavior as they would need to custom web.xml
and expand the war file before deploying to see the changes reflected in the
pages because changing those after deployment doesn't work.
Thanks for your help,
Gaetan

In response to author 97:
are made in the registry during the deployment processI tried redeploying a sample web application using <init-param> and cannot find a trace of the newly referenced variable.
Could you indicate in which regitry path should it be found?
thanks,
Gaetan

Online Plan change doesn't take effect!

After over a decade and a half of being with AT&T I switched here. Last month I changed my plan online (minutes) . When I submitted the change last month, the message said "It will take effect next cycle on 05/10/2011". Now I see my next bill now, and the plan has not changed! I just tried calling customer service and they've some technical issues and can't pull up any billing info temporarily ! I just don't understand when I saw it said the plan change was confirmed and it will take effect and now it's the same plan ! So now I did it again and it says now it will take effect 06/10/2011! This time I printed the daamnn thing to make sure there's nothing funky going on! I'm really ticked off.

Personally, I would make the plan change immediate and just pay the prorates since you are wanting the plan changed and you are having trouble with getting it changed on the next billing cycle

How to takes effect immediately, after change or cancel the last deploy

If I deployed a software, but I found the program property was wrong, purpose is set to "required". A lot of client were pushed this software, so I change the purpose to "available".
How to make all client take effect immediately?
Environment: SCCM 2012 R2 with CU1

I would re-create the deployment and use Right Click Tools for this
http://www.nowmicro.com/rct/
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Reload a method for a change to take effect ?

I've got 1 object which has 1 button and 1 label.
The containt of the label is stored in a text defined in the constructor.
When I press the button I want this text to change.
So I change the containt of the variable text in the action of the button. But it doesn't change anything. The text stay the same.
Is there any way to reload the label for this change to take effect ?
I would appreciate your help,
Olivier.

try the validate() method. It should redo the gui stuff after it has changed. And read the api too.

When I change my mobile number, how long until it takes effect?

I changed my phone number on one of my lines about 15 minutes ago. How long until I can use the phone again? Currently when I try it says 'network not responding'.

If it is a 4G phone, power it off and then on again. If it is not a 4G phone dial *228 and select option 1.
These changes should take effect immediately.
Possibility you may need to get a new SIM card if it is a 4G phone. In this case visit a store.

RDS Gateway - Why are RAP changes requiring reboot to take effect?

I have Win2k8R2 with RDS Gateway. I am using AD groups in a RAP to define which network resources can be accessed by users. For the most part, it's working as expected, but I am finding that changes to the AD group (e.g. remove a server) are not taking effect
immediately. Users are still able to establish a new connection to a server that has been removed from the AD group. If I reboot the RDS GW, the change seems to take effect, and the users can no longer access the removed server.
While I haven't tested it extensively yet, the change may also take effect after a period of time, without requiring a reboot ... but this doesn't help me either. I need to have such changes take immediate effect.
I've searched the web without luck, this is an awkward topic to get meaningful results on. Can someone tell me definitively when changes to AD groups take effect in the RAP ... and how I can force it to take immediate effect (without a reboot)?
Thanks,
Rob

Hi Dharmesh,
Yes I tried that suggestion, but it made no difference. I don't believe it has anything to do with the Domain Users group, because the problem does resolve itself - after a reboot (without having to change any group membership).
I've just confirmed this situation again yesterday ... on 2 occasions I made changes to AD group memberships that are referenced in RAPs. I added a user to the group to enable them access. Both times I waited at least 5 minutes after making
the changes, but the users still couldn't connect. I ensured all domain controllers had the AD group changes replicated ... users still couldn't connect. I rebooted the RDGW server (I am using a single server, not RD Session Host farm), and that immediately
fixed it. So the problem is still present. It feels as if RDGS is caching AD group membership.
Rob

Screensaver changes don't take effect

I went into System Preferences/Desktop&ScreenSaver/Screensaver/Options to change a couple of things, and then I went into Hot Corners to add hot corners, but after I exited the Screensaver screen, none of my changes took effect. There doesn't seem to be any OK or Apply button to start any of the changes... How can I get my changes to work?

.xinitrc:
exex startlxde
lightdm.conf (I removed the unused lines):
[LightDM]
minimum-vt=1
run-directory=/run/lightdm
greeter-session = lightdm-gtk3-greeter
display-setup-script = /usr/bin/lightdmxrandr
[SeatDefaults]
session-wrapper=/etc/lightdm/Xsession
display-setup-script =/usr/bin/lightdmxrandr
users.conf:
[UserList]
minimum-uid=1000
hidden-users=nobody nobody4 noaccess
hidden-shells=/bin/false /usr/bin/nologin
Besides, I forgot to mention that I´m using a virtual machine, namely VMWare Player.
As you may have seen, the font is rather hard to read in Midori.
What is also remarkable is that the system reacts often very sluggishly, especially when clicking the LXDE button or marking text.
Last edited by superuser (2015-04-13 20:47:44)

Data in cell does not take effect immed

Hi I have JTable with all cells editable.
Problem is when user click on a cell and enter the data. That data does not get immediately take effect in table model unless user click on some other cell.
How can i make data immediately available when for example user click on Change button and user does not have to click on any other cell.
eg...row has 4 columns.....123....456....date....date
if user changes 123 to 321...and click on CHange button i have in panel. ..it does not take effect.....user has to click on some other cell ie eg 456 cell.....then press Change button.

in preparetable where i set the model, create columns, set renderer and editors. I even tried at the end of that method..ie added this line....still did not work....please help
public void prepairLnnTable() {
    lnnTableModel = new CellSiteLNNTableModel();
    lnnTable.setModel(lnnTableModel);
    lnnTableModel.addColumn("AAA");
    lnnTableModel.addColumn("BBB");
    lnnTableModel.addColumn("Effective From");
    lnnTableModel.addColumn("Effective To");
    ccpd6.setAllowedCharacters("0123456789");
    ccpd7.setAllowedCharacters("0123456789");
    for(int k = 0; k < lnnTableModel.getColumnCount(); k++) {
      TableColumn col = lnnTable.getColumn(lnnTableModel.getColumnName(k));
      DefaultTableCellRenderer textRenderer = new DefaultTableCellRenderer();
      JTextField textColumn = new JTextField();
      TableCellRenderer renderer = null;
//      TableCellEditor editor = null;
      if(k == CellSiteLNN.AAA) {
        renderer = textRenderer;
        DefaultCellEditor editor = new DefaultCellEditor(textColumn);
        editor.setClickCountToStart(1);
        col.setPreferredWidth(25);
        textColumn.setDocument(ccpd6);
        col.setCellEditor(editor);
      if(k == CellSiteLNN.BBB) {
        renderer = textRenderer;
        DefaultCellEditor editor = new DefaultCellEditor(textColumn);
        editor.setClickCountToStart(1);
        col.setPreferredWidth(25);
        textColumn.setDocument(ccpd7);
        col.setCellEditor(editor);
      if(k == CellSiteLNN.EFF_FROM) {
        renderer = new DateCellRenderer();
        TableCellEditor editor = new DateCellEditor();
        col.setPreferredWidth(180);
        col.setCellEditor(editor);
      if(k == CellSiteLNN.EFF_TO) {
        renderer = new DateCellRenderer();
        TableCellEditor editor = new DateCellEditor();
        col.setPreferredWidth(180);
        col.setCellEditor(editor);
      col.setCellRenderer(renderer);
//      col.setCellEditor(editor);
lnnTable.putClientProperty("terminateEditOnFocusLost", Boolean.TRUE);
dFormat.setTimeZone(TimeZone.getDefault());
dFormat.setLenient(false);
}

Proxy settings of chrome or chromium don't take effect

I'm using archlinux+kdemod 4.5.
The proxy setting of all versions of chrome or chromium seems not to take effect because my ip address doesn't change(http://www.ip-adress.com/) .
I also tried swithcy! proxy but it doesn't help.
However, starting the chrome with "--proxy-server=ip:port" can enable the proxy.
any ideas?
thx~

fsckd wrote:Do you use the all_proxy environmental variable?
env | grep proxy
output nothing.

How long does it take for new security questions to take effect?

I am trying to make an in-app purchase from my iPhone, and forgot my security questions. So I went and changed them so that I could input them on my iPhone to make the purchase. Having saved the security questions, the new ones are not appearing when I go to make the purchase now. Ive saved the security questions multiple times, and they still have not changed. Also signed out and back into my account on my iPhone hoping the changes would take effect.

Hi pinkiepie! Welcome to the Verizon Wireless family. Hopefully by now, you've discovered that when your old phone stopped working, your new Verizon Wireless phone was already up and running. A port from another wireless carrier usually takes between 5 minutes and 24 hours to complete, depending on the carrier and the accuracy of the information submitted. During the process of the port, you'll be able to make calls right away from your new Verizon Wireless phone but you will not be able to receive calls. Once the port is finished, the service on the old phone will completely shut off and the new phone is ready for full activation and you'll be able to place and receive calls successfull. In case you're curious, here's a link to more FAQs about Local Number Portability: http://bit.ly/QTARox
Enjoy your new phone and service. Have a wonderful day!
JenniferH_VZW
Please follow us on Twitter @vzwsupport

Account Analysis Report parameters doesn't take effect on output

Hi all,
I run the Account Analysis Report(XLAAARPT) but the parameters doesn't take effect on output... In System Administrator responsibility i check the params P_RESP_APPLICATION_ID and P_JE_SOURCE_NAME to be displayed so the user can choose from LoV but the didn't take any effect on the result. If i specify to display the result from this report only for Payables source - i receive all other sources too(Asset, Receivables, etc...). Any ideas what should i change to make it work correctly?
EBS Version : 12.1.3.
Thanks in advance,
Bahchevanov.

Issue solved. I have to change the data definition xml file by adding some WHERE clauses to use the parameter for the source. In fact i'm not sure this is the best way to achieve it but it works.
BR,
Bahchevanov.

IBase warranty changes take effect???? Urgent..

Similar Messages

Maybe you are looking for