IBM MQSeries JAR's needed

Hey Folks,
i'm searching for the following JAR's:
MQSeries 5.2
com.ibm.mq.jar
com.ibm.mqjms.jar
MQSeries 5.3
com.ibm.mq.jar
com.ibm.mqbind.jar
com.ibm.mqjms.jar
connector.jar (this file can also be retrieved from the SAP J2EE server directory)
I try to add these to the JMS Adapter, but i can't find them. Please help.
Thank you!
Best Regards
Robert

Hi
Check this link
http://www.java2s.com/Code/Jar/Spring-Related/Downloadconnectorjar.htm
http://www.niratul.com/wmqtool002.htm
Regards
Ramesh
Edited by: Venkataramesh Boppana on May 11, 2009 5:16 PM

Similar Messages

Sender JMS adapter configuration for IBM MQSeries

Dear All,
i am doing a IBM MQSeries 5.2.x Message ->sender JMS adapter -> XI server -> receiver RFC adapter -> R/3.
i have deployed the JMS adapter with the required jar files of IBM MQSeries 5.2.x in XI server.
in Sender JMS adapter configuration for IBM MQSeries 5.2.x, i have put following data:
1. Transport Protocol: Websphere MQ - is it okay?
in JMS provider settings:
2. in channel name - what should be there?
3. Transport Network protocol should be TCP/IP or WebsphereMQ - how to decide this thing.
4. JMS Complaint - whether WebsphereMQ or JMS API.
in JMS Settings:
5. JMS Queue user - is this IBM MQSeries 5.2.x Queue User or someother user?
6. JMS Message Selector - what data to take here.
So if anybody has connected IBM MQSeries 5.2.x to XI via JMS adapter, please answer my above queries.
Regards,
Rajeev Gupta

Hi Swaroop,
you can send me those documents at my gmail-id : [email protected]
Hi All,
one more question - to connect XI server to IBM MQSeries via JMS adapter in ID, do we need to have a MQSeries Client installed on XI server - or - just by configuring JMS adapter, we can send messages from IBM MQSeries to XI server without any MQSeries client on XI server?
Why Channel name is required in JMS configuration data?
Thanks,
Rajeev Gupta

Remote queue in XI server for IBM MQSeries

Dear All,
my scenario is IBM MQSeries -> message via sender JMS adapter -> XI -> receiver RFC adapter -> R/3.
now for IBM MQSeries to send a message to XI via a transmission queue in MQSeries - it needs a remote queue name and queue manager name in XI server.
So now where can i find these information regarding remote queue name and queue manager name in XI server. I currently do not know whether in XI server, currently is there any remote queue or not? So how to find this information. If we do not have remote queue manager in XI currently, then how to install a remote queue name and queue manager in XI server.
It is slightly urgent. So i request you all to please reply quickly.
Thanks and Regards,
Rajeev Gupta

Dear Sebastin,
Thanks for your inputs.
I have to connect to MQSeries 5.2.1 to XI server.
am getting the below error in Communicatin Channel Monitoring for my sender JMS adapter:
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for '<IP_ADRESS>:<MQ_QUEUE_MANAGER>'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:546)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1137)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:799)
com.ibm.mq.MQException: Message catalog not found
at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:171)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:228)
i have written '<IP_ADRESS>:<MQ_QUEUE_MANAGER>' just to hide the data - i am getting <IP_ADRESS> as IP Adress i gave in JMS adapter and <MQ_QUEUE_MANAGER> as Queue Manager i gave in JMS adapter.
i am using the correct IP and 1414 port of MQSeries server. I have used a MQQueueManager defined in MQSeries. i have deployed JMS adapter properly in XI server.
So can anybody suggest what could be the possible reason of this error and how to rectify it. It is slightly urgent.
One more question - should the queue manager in MQSeries server be a local or remote queue manager..........i was not able to create a remote queue manager in MQSeries 5.2.1 as by default it is creating a local queue manager.......
Thanks and Regards,
Rajeev Gupta

Newbie : Problem starting OPG for IBM MQseries: TNS-00530, Error Code 2

Hi All
First of all, if this is the wrong place to post this question, I apologize.
I have installed a new installation of Oracle 9.2.0.1 and at a separate home location the OPG for IBM MQSeries for 9.2.0.1 off the same bits.
The configuration said that the default SID of PG4MQS92 would be setup since I was using a local MQ queue manager but I didnt see any entries in the listener.ora or the tnsames.ora so added the following.
listener.ora
(SID_DESC =
(SID_NAME = pg4mqs92)
(ORACLE_HOME = C:\Software\oracle\pg4mqs92)
(PROGRAM = pg4mqs92)
tnsnames.ora
ORACLE_QM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = testmachine)(PORT = 1521))
(CONNECT_DATA =
(SID = pg4mqs92)
(HS=OK)
When I ran tnsping on ORACLE_QM it was resolved. But when I start the putsample.sql program after importing all the required packages using the pgmdeploy9.sql script I get the following output.
DECLARE
ERROR at line 1:
ORA-04052: error occurred when looking up remote object
[email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-28545: error diagnosed by Net8 when connecting to an agent
NCRO: Failed to make RSLV connection
ORA-02063: preceding 2 lines from PG4MQ
In the listener.log I see the following error
07-DEC-2005 07:34:19 * (CONNECT_DATA=(SID=pg4mqs92)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.100)(PORT=1271)) * establish * pg4mqs92 * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
I noticed that during the install a boot file for the pgm4mqs92 SID was not found anywhere. Is it maintained in the registry, if so where ?
If the boot file is missing is there a sample I can use and where do I need to put it ?
Am running on Windows XP Professional.
Have been stuck with this a while and cannot find any information on this, so any help would be appreciated.
Thanks
- Deepak

I am getting the same error while starting or stopping the listener
LSNRCTL> start CSCLIST
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL> stop CSCLIST
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=CSCINDAE708070)(PORT=152
2)))
NL-00303: syntax error in NV string
TNS-01153: Failed to process string: (DESCRIPTION=(CONNECT_DATA=(CID=(PROGRAM=)
(HOST=)(USER=Manager(REMOVE)))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=CSCLIST)(VERS
ION=186646784)))
Pls help
Listener.ora:
# listener.ora Network Configuration File: D:\Sagaya\11gDBhome\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
CSCLIST =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = CSCINDAE708070)(PORT = 1522))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
SID_LIST_CSCLIST =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\Sagaya\11gDBhome\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\Sagaya\11gDBhome\product\11.2.0\dbhome_1\bin\oraclr11.dll")
ADR_BASE_CSCLIST = D:\Sagaya\11gDBhome

Not getting com.ibm.mq.jar and com.ibm.mqjms.jar files

Hi Sudhir,
Thank you very much for your guidance.
But I am not getting com.ibm.mq.jar, and com.ibm.mqjms.jar files. what do I have to do to get this file?
And do I require both these files in getting initial context for JNDI.
Thanks in advance.
Have a nice day

Hay,
theres also a zip file from IBM titled MA88 that contain the jar files needed for supporting JMS programs in a Java env (these files are included there) and they're also included in WBI v5.2 and higher.

JMS versus IBM MQSeries

1. What is the difference between JMS and IBM MQSeries ?
2. If JMS is all about APIs to interact with Message Oriented Middleware (MOM) that IBM MQSeries supports, why not use a simple JAVA program that would import com.ibm. * packages instead of JMS APIs ? What is the benefit we derive from using JMS ?

I think what you are saying is JMS is the preferred
way to communicate with MOM (i.e. MQ) as it is
standard and not vendor dependant. My concern is
this:
If we write a stand alone program to send/retrieve
meessage from MQ then how do we create
ConnectionFactory and connection? Personally I prefer to use Dependency Injection using a library like Spring to configure things like JMS connection factories, JDBC DataSources etc.
http://www.springframework.org/
though the more typical (and some would say official) way of doing it is to use JNDI in your application. So create a JNDI context and pull the JMS ConnectionFactory and destinations out of JNDI.
e.g. like this
http://svn.activemq.org/trunk/activemq/modules/core/src/test/org/activemq/demo/SimpleProducer.java?rev=1&view=auto
Then you need to refer to your JMS provider's documentation on how to configure a JNDI context. Typically its a case of adding a jndi.properties file to the classpath configured to your provider's JNDI provider.
Don't we need MQ
classes to create these objects.Yes, you need the classes from your JMS provider to create connections & sessions. (Its not like EJB remoting where you can create client side proxies from the EJB interfaces).
James
http://logicblaze.com/

Upgrade jdk 1.6.0_15 or higher which class jar I need, I am running eclipse

Can someone tell me, if I have a class 12.jar with jdk 1.2 and upgrade jdk to 1.6.0_15 or higher, which class jar I need and where can I get it? Ideal would be with some instructions. :) Thanks so much.

It's all here: http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/index.html

Java Doc for IBM MQSeries

Hi,
Can anyone tell me where i can get javadoc for IBM MQSeries Classes.
Regs
David Jeyam

http://www-3.ibm.com/software/ts/mqseries/library/manuals/

J2EE and IBM MQSeries

Hi
We are planning to use IBM MQSeries as a JMS server for message driven beans.
We are using OC4J 2.0 developer preview, but can't figure out how to connect to MQSeries. It looks like we have to use JNDI, but how?
Best regards
Ole

Hi Ole,
The following may help you...
http://kb.atlassian.com/content/orion/docs/resource-providers/resource-providers.html
Good Luck,
Avi.

IBM MQSeries Gateway

I would like to connect to IBM MQSeries v.5.3
from an Oracle 9.2.
According to Metalink and Oracle documentation,
I could use PG4MQ
(Oracle Procedural Gateway) or
Messaging Gateway using AQ.
They have different architecture
and different configuration.
Which one is better ?
During the Oracle installation I
have only the PG4MQ option,
so how I could use Oracle Procedural Gateway
Thanks

Dear Yang!
I have the same problem considering the two possibilities to connect ibm with oracle...
Did you get some useful information or do you have some experience now? If yes could you please update the post!
Thanks
Markus

List of .jar file need to add in web application by using eclipse europa?

hi
what are the list of .jar file need to be added in web application which use the ide of Eclipse Europa?

Depends on the application requirements. For a basic JSP/Servlet application just integrate Tomcat in Eclipse and assign it as application server to your web project, then you don't need to add anything. If you for example need JSF, then you should add its JAR's to the classpath of the web project, which is by default /WEB-INF/lib.

Message Bus to IBM MQSeries bridging?

Hi,
I need to connect from Azure to IBM MQ series queues. I have found some documentation about a MSMQ->MQSeries bridge which is part of some Hosting software which doesn't exist anymore.
In pratical terms, how to approach this from Azure? What steps to take?
Werner

hi Werner,
There is a document about message connection between IBM queues and azure service bus. You could refer to
http://blrp.org/2013/03/ibm-websphere-message-broker-azure-service-bus/ .
Hope it helps.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

JAR files needed ?

I am trying to create a Dynamic Web Project in Eclipse exactly as Portal Project in Workshop, I am trying to find what are the JAR files we needed,
Can any one point me to any resources where i can look into it,
Thanks
JD

Hi,
Use IBM class loader plug-in for Eclipse to find the required jar files by specifying the package name or class name. This will help you to avoid including files, which are not required.
Regards,
Bhavani Prasad

Plz help....JAR file needed.......

Hi Friends,
I want to use the IUrlGeneratorService and IPortalUrlGenerator classes for a URL generation task. But I cannot find the JAR file having these classes. I tried finding com.sap.portal.appintegrator.sap.bwc_api.jar in my eclipse/plugins but could not find it.
Where can I find this JAR, or any other JAR having the files I need?
Plz help.

Hi,
You can find jar files from this link also
<a href="http://www.alphaworks.ibm.com/aw.nsf/reqs/jarclassfinder">Jar Files</a>
And check in your portalapps folder the name of the jar file for urlgenerator is bc.rf.global.service.urlgenerator_api.jar.
Regards,
Venkatesh.K.

Error while running (java -jar orion.jar -install) Need yr help ?

Hi,
I have
Win 2000 Professional
Oracle 9i release 1and have the Pre-Requisites of MapViewer as follows.
OC4J_extended (Pre-Requisite for MapViewer)
XML Parser (Built-in OC4J)
Oracle 9iI don't know whether I have Oracle Client or not which is also pre-requisite for MapViewer ? I think it is built-in with any of the above... most probably with Oracle 9i !!!
I have JDK1.3 as wellI have Oracle9iAS release 1.0.2.2.2a, but I don't want to use it, as I have OC4J standalone...
I want to have the configuration, for using Oracle Spatial/MapViewer.... How can I do that ? I need steps/procedure...
I am having problems in configuring OC4J which I have downloaded. I have unzipped OC4J_Extended in Oracle 9i Database home directory (not in Oracle 9iAS home directory... because I dont have installed iAS)
Its installation guide asks for installation through the following command
java -jar orion.jar -installbut after unzip, I don't get any file named "orion.jar"
What should I do ? Where am wrong ? Should I have to use 9iAS for using MapViewer in any case, if so which version ? I need the heirarchy of steps ?
I m really stucked !!!
Any help would be highly appreciated.
Thanx
Zaaf.

Hi,
If you are just using OC4J, you should only need to do:
java -jar oc4j.jar -install
Also note that you should not install oc4j in the oracle_home
directory. If/when you upgrade oracle to apply patches, etc
it will overwrite/cause problems with your oc4j install if you
put it in the oracle_home directory. Put it in any other directory.
The only part of Oracle9iAS needed to run mapviewer is oc4j.
After that is installed, then follow the instructions in the MapViewer
User's Guide (available on OTN).

IBM MQSeries JAR's needed

Similar Messages

Maybe you are looking for