IChat just doesn't work with one of my buddies

Hi there, I can get my iChat to work with some of my buddies, I did try appleu3test and it did work for me and for this problematic buddy, I even asked one of my "working" buddies to invite first my difficult buddy, and then invite me for multi chat and all went like a whiz. I do not get the problem. Firewalls set according to Ralph's recommendations, tests do work, other buddies do work, but me. What can be wrong?
It is PB G4 and MBP

Hi Vladimir,
This is either
1) a firewall issue
2) a NAT issue
3) or a modem that has difficulty with iChat and SIP issue.
Can you tell us what modems and/or routers are being used and what has been done to set them up, please ?
9:58 PM Sunday; December 10, 2006

Similar Messages

  • IChat AV doesn't work with M-Audio Firewire audio interface

    I saw similar topics to this but none dealing with a Firewire audio interface and none with exactly the same problem.
    Every other piece of software I use works with the M-Audio Firewire Solo, except for iChat AV. When it is the selected output device and I start a video chat with someone, I get just horrible, loud static when the person on the other end speaks.
    Running 10.4.10 on a Macbook Pro (2.16 GHz Intel Core 2 Duo).
    Does anyone know of incompatibility issues with iChat and Firewire interfaces?

    In Audio MIDI Setup (In applications/Utilities) the setting for my Mic is 44100khz 1Ch 16bit.
    The Internal Audio connection also shows up at 44100Khz 2Ch 16bit
    Are you looking in the same place or in the device itself ?
    I would set it in the Audio MIDI Setup and then make sure it responds in System Preferences > Sound > Input tab.
    Once the Blue bar moves to at least halfway there I would then check iChat > Preferences > Video Section to see if the green bar under the Vido pics is moving.
    4:25 PM Friday; September 7, 2007

  • Isight doesn't work with one computer

    the whole family got isight cameras for christmas. as long as we're all in the house we can see each other on our cameras, but when i take my laptop out of the house to another location, i can see my stepdad's computer, but not my mom's.
    i've checked with the cable modem people- no firewalls there. i've called apple- no ideas from them.
    firewalls are OFF on all three computers, preferences for ichat AV are all the same on all three computers.
    i can see video with pc's and other macs, including the apple test ids (appleu3test01, appleu3test02).
    pc's can't see my computer, the only mac that can't see me on my computer is my mom's.
    any ideas?
    my computer: powerbook g4; os10.4.3
    mom's computer: powerbook g4; os 10.4.3
    stepdad's computer: desktop g5; os 10.4.3
    thanks for any help you may have to offer...

      Hello Anita. You have a good start and are doing the right things.
    Here is how I recommend you continue your trouble shooting to find the SOURCE of your problem(s?) so you know what to fix. Otherwise EVERYONE will need to try EVERYTHING.
    I suggest that you disconnect everything except one ethernet connected Mac from your home internet connection as suggested in Using iSight with iChat AV. Begin testing with other Mac users (you can use these if you need additional Buddy Names for iChat Test) to find ONE of your available Macs that can connect for reliable video from ONE of your available internet connections. Then, try the next Mac from that known good connection.
    If none of your Macs work when connected directly to your Broadband modem via ethernet cable, first Check your Broadband Speed to be certain you have enough bandwidth.
    You should also consider Possible hardware or software conflicts.
    Then, if bandwidth or conflicts are not your problem, try any applicable suggestions from Help for iChat AV 3 Problems until you get ONE Mac working. This will establish a known good internet connection.
    Concentrate on ONE Mac until it is working with other Mac testers. Then fix the next Mac.
    Finally, you can begin adding back other items (if any) such as a router, wireless, etc., to your know good modem to find any problems associated with your connection devices.
    If you need to post back, let us know whether your successful video connection inside your house was via Bonjour or via the AIM server.

  • Sound doesn't work with one player but does with two...

    I'm running the Win7 Release Candidate and have Flash Player 10 installed.  Today when I tried to play a video on youtube, there was sound for a split second, and then it cut out while the video continued to play.  I tried uninstalling and reinstalling Flash with no success. Then I tried opening up two tabs and played a video in each tab, and suddenly the sound was working again.  This happens in both Google Chrome and IE8.  I have normal sound in all other applications.  Any suggestions?

    is the driver for your network card up to date?  that could be a reason it will not work with the more up to date HH3
    If want more assistance from the forum members please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com or http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 and post the results .
    are you connected directly to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Ichat doesn't work with one buddy - can't figure out why!

    It has to have something to do with the internet connection and the way they have it set up but I can't figure it out.
    My family all has macs - there is no problems with video chatting through our AIM accounts until we try and hook up with my parent's imac. It works for a second and then freezes. We are all at different locations so I can't imagine what the problem could be. It works just fine if both computers are using my parent's internet connection, it's just when we are trying to connect with them from our own connections.
    Not sure if it matters but my parent's imac in fairly new, they bought about 5 months ago. Like I said, I have a feeling it's the settings on modem or router but I'm not sure what to try. Does anyone have any suggestions as to what we can try???
    Thanks so much!!

    Hi,
    What router or Modem do they have ?
    What Error log number are you getting ?
    Old Logs are in your Home Folder/Library/Logs/iChatConnectionErrors
    Error 20 (No data for 10 secs) can be caused be a feature in the router at the far end.
    They should turn Off any DoS (Denial of Service) or SPI (Stateful packet Inspection) as both are threshold based and cut the port that is giving "Problems" (iChat can send so much data in Video chats over modern Internet Speeds, the device will think it is an Attack)
    Error 22 is a Speed/bandwidth issue
    If they are on Leopard they should go to System Preferences > Quicktime > Streaming tab and select 1.5mbps (The Automatic Setting can be too low)
    In fact all ends should do this for Tiger and Leopard computers.
    iChat will need Restarting afterwards to "See" the new speed.
    There are other possible numbers but those are the most likely based on your description.
    9:27 PM Tuesday; September 15, 2009

  • Cd drive doesn't work with one CD.

    I have one Cd that will not play on my tangerine iBook. I put it in, it slows the whole thing down, and I have to prematurely turn it off. My brother has an indogo, that plays the CD fine. All other Cds work on my clamshell, but this doesn't. The Cd works in Os 9 also, so what's the deal?

    What kind of cd is it? I've run into a problem with burned cd's from machine to machine. I always thought that one cd drive is more picky than others. My old indigo Imac had a hard time with burned music cd's, but they played in my Clamshell...and I belive they have the same cd drives.
    Try cleaning the clear optical lense with a q-tip and alcahol gently.
    See if that helps.

  • Touch id doesn't work with one particular finger

    Touch ID will recognize my right thumb when initially set up, and then recognition deteriorates .  I have set up other fingers and they continue to work fine, its only the right thumb.  I have even reset device, and it will work like a charm for a few days and then same problem.  Sound like an odd problem, but I have reset phone and finger print enough times to see that the problem actually exist. Common sense would say use other fingers, but my right thumb is the dominate finger and most convienant to use.  Any ideas?

    Have you tried cleaning your thumb to remove oils and dirt that will cause recognition to deteriorate? Also clean the Home button thoroughly.
    You also need to go through the entire touch setup that should capture you entire finger print instead of only catching a partial record.

  • HT5706 I am trying to set up Apple TV with my Uverse WiFi, but I get errors when entering my password.  One site said that Apple TV doesn't work with WPA which Uverse uses.  Is there anyway around this or will Uverse and Apple TV just not work together.

    Trying to set up Apple TV with ATT Uverse.  I get errors when trying to enter my WiFi password.  One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption.  If true, does that mean Uverse subscribers cannot use Apple TV?

    Spurs63 wrote:
    does that mean Uverse subscribers cannot use Apple TV?
    No, that's a rather silly conclusion.
    There are two options:
    stop using the crappy router provided by the ISP.
    Physically connect the ATV to the router via Ethernet.

  • I have truble with firefox 5 because the plugin I want to use doesn't work with 5 yet, just 4. The plugin is Firebug.

    I can't use the plugin "Firebug" because it doesn't work with Firefox 5 yet. Because of that I want to download Firefox 4 instead of 5, but I can't find it anywhere. Just the third version, and 5 off course.
    I'm sorry if this isn't in the correct category, just picked the one that seemed to be right...

    Go buy yourself a iPhone 5. Sync your iPhone 3GS to iTunes on you computer so you have a back up ready to put on the iPhone 5. If you want you can update your iPhone 3GS with iTunes on your computer, but this is not necessary.

  • IPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

    iPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

    At least to 10.6.8. You must do this to upgrade to Mountain Lion.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • How can I order an iphone 6 and pick it up from one of the apple stores in London. It doesn't work with reserve and pick up because the 64 gb is never in stock.

    How can I order an iphone 6 and pick it up from one of the apple stores in London??? It doesn't work with reserve and pick up because the 64 gb is never in stock.

    Thank you for replying.    Yes I deleted the old email address..   

  • My imessage has just stopped working with one of my contacts, on both of our phones imessage still works with other contacts. Why can we imessage others but not each other?

    My imessage has just stopped working with one of my contacts, on both of our phones imessage still works with other contacts. Why can we imessage others but not each other?

    Yes... to no avail

  • I bought a mini DVI to HDMI convertor and  a HDMI to VGA cable to connect my mac book pro to a tv but it doesn't work any one can help.\\\\\

    i bought a mini DVI to HDMI convertor and  a HDMI to VGA cable to connect my mac book pro to a tv but it doesn't work any one can help.

    I would suggest looking into a Thunderbolt to HDMI connector. In this case, you may be able to use the TV as an external monitor. For this option, please confirm through additional research. I have not tested it personally.
    You can also use an Apple TV, which connects with HDMI. In this case, you can use Airplay Mirroring. Not all Macs support Airplay Mirroring, so you need to check first. I have a Mid-2011 27" iMac, and it supports Airplay Mirroring. I don't use it often because my TV is in another room, but I just tried it and it worked. It had to change the screen resolution to work well, so I don't know if I would want to use it as my day to day monitor. http://support.apple.com/kb/ht5404

  • L2TP on Cisco ASA 5505, just doesn't work??!

    This is pretty urgent, client expects me to have this up by lunch today
    So, there is this Cisco ASA 5505 ver 8.4.
    Most things work but now I want to setup a vpn connection...
    I have done this 2 ways, first by using the "VPN Wizard" in ASDM and then 5 hours later removing everything and configuring from cli.
    And it just doesn't work, client (WinXP & Win7) gets "error 792" and sometimes "error 789" (both indicating problem with phase 1, I'm pretty sure of that)
    Googling on those gives a few suggestions none works.
    All I get in the log on Cisco is the "Error processing payload: Payload ID: 1"
    Googling on that only comes up with a few pages telling me this message is caused by an error. (Yeah, I could never have guessed...)
    For the cli config, I followed this tutorial carefully (3 times actually...)
    http://www.cisco.com/en/US/docs/secu...html#wp1117464
    I'm using PSK for IPSec, entered same on Cisco and client - checked several times, this is not a password/PSK issue.
    Ports opened on Cisco: 500, 1701, 4500
    (For a try I opened all ports, no change.)
    And here's the "show run":
    Code:
    ASA Version 8.4(2)
    hostname ciscoasa
    enable password <string> encrypted
    passwd <string> encrypted
    names
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    switchport access vlan 7
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.5.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address #.#.#.# 255.255.255.252
    interface Vlan7
    description VLAN till kontor
    no forward interface Vlan2
    nameif kontor
    security-level 100
    ip address 172.16.5.1 255.255.255.0
    ftp mode passive
    clock timezone GMT 0
    same-security-traffic permit inter-interface
    same-security-traffic permit intra-interface
    object network obj_any
    subnet 0.0.0.0 0.0.0.0
    object network Webserver
    host 192.168.5.2
    object network Webserver443
    host 192.168.5.2
    object network rdp
    host 192.168.5.2
    object network vpnserver
    host 192.168.5.2
    object service vpn-service-group
    object network VPN
    host 192.168.5.2
    object-group service Webports tcp-udp
    description Portar för webbserver
    port-object eq 443
    port-object eq www
    object-group service DM_INLINE_TCP_1 tcp
    group-object Webports
    port-object eq www
    object-group protocol TCPUDP
    protocol-object udp
    protocol-object tcp
    object-group service VPNports tcp-udp
    port-object eq 1701
    port-object eq 4500
    port-object eq 500
    object-group service RDP tcp-udp
    port-object eq 3389
    object-group service vpn-services tcp-udp
    port-object eq 1701
    port-object eq 500
    access-list outside_access_in extended permit tcp any object Webserver eq www
    access-list outside_access_in_1 extended permit tcp any object Webserver object-group DM_INLINE_TCP_1
    access-list outside_access_in_1 remark Ãppnar för vpn
    access-list outside_access_in_1 extended permit object-group TCPUDP any any object-group VPNports
    access-list outside_access_in_1 extended permit object-group TCPUDP any any object-group RDP
    pager lines 24
    logging enable
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    mtu kontor 1500
    ip local pool vpn1 10.10.10.10-10.10.10.50 mask 255.255.255.0
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    object network obj_any
    nat (inside,outside) dynamic interface
    object network Webserver
    nat (inside,outside) static interface service tcp www www
    object network Webserver443
    nat (inside,outside) static interface service tcp https https
    object network rdp
    nat (inside,outside) static interface service tcp 3389 3389
    access-group outside_access_in_1 in interface outside
    route outside 0.0.0.0 0.0.0.0 79.142.243.33 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    aaa authentication ssh console LOCAL
    aaa authorization command LOCAL
    aaa authorization exec LOCAL
    http server enable
    http 0.0.0.0 0.0.0.0 inside
    http 0.0.0.0 0.0.0.0 outside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA mode transport
    crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec ikev1 transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set TRANS_ESP_3DES_SHA mode transport
    crypto ipsec ikev2 ipsec-proposal 3DES-SHA
    protocol esp encryption aes-256 aes-192 aes 3des
    protocol esp integrity sha-1 md5
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal 3DES-SHA
    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_map interface outside
    crypto ca trustpoint ASDM_TrustPoint0
    enrollment self
    subject-name CN=ciscoasa
    proxy-ldc-issuer
    crl configure
    crypto ca certificate chain ASDM_TrustPoint0
    .... (sorry, not giving you the cert...)
    crypto ikev2 policy 1
    encryption 3des
    integrity sha
    group 2 1
    prf sha
    lifetime seconds 86400
    crypto ikev1 enable outside
    crypto ikev1 policy 10
    authentication pre-share
    encryption 3des
    hash md5
    group 1
    lifetime 86400
    crypto ikev1 policy 20
    authentication rsa-sig
    encryption aes-256
    hash sha
    group 1
    lifetime 86400
    crypto ikev1 policy 30
    authentication pre-share
    encryption aes-256
    hash sha
    group 1
    lifetime 86400
    crypto ikev1 policy 40
    authentication crack
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 50
    authentication rsa-sig
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 60
    authentication pre-share
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 70
    authentication crack
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 80
    authentication rsa-sig
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 90
    authentication pre-share
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 100
    authentication crack
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 110
    authentication rsa-sig
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 120
    authentication pre-share
    encryption 3des
    hash sha
    group 1
    lifetime 86400
    crypto ikev1 policy 130
    authentication crack
    encryption des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 140
    authentication rsa-sig
    encryption des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 150
    authentication pre-share
    encryption des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh scopy enable
    ssh 0.0.0.0 0.0.0.0 inside
    ssh 0.0.0.0 0.0.0.0 outside
    ssh timeout 10
    console timeout 0
    no vpn-addr-assign aaa
    no vpn-addr-assign dhcp
    l2tp tunnel hello 100
    dhcpd dns 8.8.8.8
    dhcpd auto_config outside
    dhcpd address 192.168.5.11-192.168.5.36 inside
    dhcpd enable inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    group-policy DefaultRAGroup internal
    group-policy DefaultRAGroup attributes
    vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec
    address-pools value vpn1
    group-policy DfltGrpPolicy attributes
    dns-server value 79.142.240.10
    vpn-tunnel-protocol l2tp-ipsec
    address-pools value vpn1
    username test password <string> nt-encrypted
    username someoneelse password <string> nt-encrypted privilege 15
    username someoneelse attributes
    vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec
    service-type admin
    username someone password <string> nt-encrypted privilege 0
    tunnel-group DefaultRAGroup general-attributes
    authorization-server-group LOCAL
    tunnel-group DefaultRAGroup ipsec-attributes
    ikev1 pre-shared-key *****
    tunnel-group DefaultRAGroup ppp-attributes
    authentication ms-chap-v2
    tunnel-group vpn1 type remote-access
    tunnel-group vpn1 ipsec-attributes
    ikev1 pre-shared-key *****
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny
      inspect sunrpc
      inspect xdmcp
      inspect sip
      inspect netbios
      inspect tftp
      inspect ip-options
    service-policy global_policy global
    privilege cmd level 3 mode exec command perfmon
    privilege cmd level 3 mode exec command ping
    privilege cmd level 3 mode exec command who
    privilege cmd level 3 mode exec command logging
    privilege cmd level 3 mode exec command failover
    privilege cmd level 3 mode exec command packet-tracer
    privilege show level 5 mode exec command import
    privilege show level 5 mode exec command running-config
    privilege show level 3 mode exec command reload
    privilege show level 3 mode exec command mode
    privilege show level 3 mode exec command firewall
    privilege show level 3 mode exec command asp
    privilege show level 3 mode exec command cpu
    privilege show level 3 mode exec command interface
    privilege show level 3 mode exec command clock
    privilege show level 3 mode exec command dns-hosts
    privilege show level 3 mode exec command access-list
    privilege show level 3 mode exec command logging
    privilege show level 3 mode exec command vlan
    privilege show level 3 mode exec command ip
    privilege show level 3 mode exec command ipv6
    privilege show level 3 mode exec command failover
    privilege show level 3 mode exec command asdm
    privilege show level 3 mode exec command arp
    privilege show level 3 mode exec command route
    privilege show level 3 mode exec command ospf
    privilege show level 3 mode exec command aaa-server
    privilege show level 3 mode exec command aaa
    privilege show level 3 mode exec command eigrp
    privilege show level 3 mode exec command crypto
    privilege show level 3 mode exec command ssh
    privilege show level 3 mode exec command vpn-sessiondb
    privilege show level 3 mode exec command vpnclient
    privilege show level 3 mode exec command vpn
    privilege show level 3 mode exec command dhcpd
    privilege show level 3 mode exec command blocks
    privilege show level 3 mode exec command wccp
    privilege show level 3 mode exec command dynamic-filter
    privilege show level 3 mode exec command webvpn
    privilege show level 3 mode exec command module
    privilege show level 3 mode exec command uauth
    privilege show level 3 mode exec command compression
    privilege show level 3 mode configure command interface
    privilege show level 3 mode configure command clock
    privilege show level 3 mode configure command access-list
    privilege show level 3 mode configure command logging
    privilege show level 3 mode configure command ip
    privilege show level 3 mode configure command failover
    privilege show level 5 mode configure command asdm
    privilege show level 3 mode configure command arp
    privilege show level 3 mode configure command route
    privilege show level 3 mode configure command aaa-server
    privilege show level 3 mode configure command aaa
    privilege show level 3 mode configure command crypto
    privilege show level 3 mode configure command ssh
    privilege show level 3 mode configure command dhcpd
    privilege show level 5 mode configure command privilege
    privilege clear level 3 mode exec command dns-hosts
    privilege clear level 3 mode exec command logging
    privilege clear level 3 mode exec command arp
    privilege clear level 3 mode exec command aaa-server
    privilege clear level 3 mode exec command crypto
    privilege clear level 3 mode exec command dynamic-filter
    privilege cmd level 3 mode configure command failover
    privilege clear level 3 mode configure command logging
    privilege clear level 3 mode configure command arp
    privilege clear level 3 mode configure command crypto
    privilege clear level 3 mode configure command aaa-server
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:dd92aa6707dc63e8ed7dad47cfecdd47
    : end
    In Pingvino Veritas!

    I lmost got it working now, new problem is that the connection is immediately ended.
    Logs shows that client is authenticated and assigned an ip.
    From the logs, all happens during one second:
    IPAA: Client assigned ip-address from local pool
    IPAA: Local pool request succeeded for tunnel-group
    IPAA: Freeing local pool address
    L2TP Tunnel created, tunnel_id is 24
    L2TP Tunnel deleted, tunnel_id =24
    IPSEC: An outbound remote access SA has been deleted
    IPSEC: An inbound remote access SA has been deleted
    Session is being torn down. Reason: L2TP initiated
    Teardown UDP connection

  • Time Machine Just Doesn't Work Anymore

    I was a happy Time Machine (with Time Capsule) user for months. But it just doesn't work anymore. It takes longer than an hour to do every hourly backup so it is backing up 24 hours a day. It finds hundreds of thousands of files changed every hour and tries to back them up. Finders says only tens of files have been modified all of today. I have tried rebuilding my spotlight indexes, repairing my Time Capsule with Disk Utility and starting over with a brand new backup. But it just backs up hundreds of thousands of files every hour. So I am turning off Time capsule since it is clearly broken. If anyone has any suggestions at all I would welcome them.

    Marcia,
    Consider the following, it might give you some ideas:
    Time Machine performs backups at the file level. If a single bit in a large file is changed, the WHOLE file is backed up again. This is a problem for programs that save data to monolithic virtual disk files that are modified frequently. These include Parallels, VMware Fusion, Aperture vaults, or the databases that Entourage and Thunderbird create. These should be excluded from backup using the Time Machine Preference Exclusion list. You will, however, need to backup these files manually to another external disk.
    One poster observed regarding Photoshop: “If you find yourself working with large files, you may discover that TM is suddenly backing up your scratch disk's temp files. This is useless, find out how to exclude these (I'm not actually sure here). Alternatively, turn off TM whilst you work in Photoshop.” (http://discussions.apple.com/thread.jspa?threadID=1209412)
    If you do a lot of movie editing, unless these files are excluded, expect Time Machine to treat revised versions of a single movie as entirely new files.
    If you frequently download software or video files that you only expect to keep for a short time, consider excluding the folder these are stored in from Time Machine backups.
    If you have recently created a new disk image or burned a DVD, Time Machine will target these files for backup unless they are deleted or excluded from backup.
    Installing new software, upgrading existing software, or updating Mac OS X system software can created major changes in the structure of your directories. Time Machine will backup every file that has changed since the installation.
    Files or folders that are simply moved or renamed are counted as NEW files or folders. If you rename any file or folder, Time Machine will back up the ENTIRE file or folder again no matter how big or small it is.
    George Schreyer describes this behavior: “If you should want to do some massive rearrangement of your disk, Time Machine will interpret the rearranged files as new files and back them up again in their new locations. Just renaming a folder will cause this to happen. This is OK if you've got lots of room on your backup disk. Eventually, Time Machine will thin those backups and the space consumed will be recovered. However, if you really want recover the space in the backup volume immediately, you can. To do this, bring a Finder window to the front and then click the Time Machine icon on the dock. This will activate the Time Machine user interface. Navigate back in time to where the old stuff exists and select it. Then pull down the "action" menu (the gear thing) and select "delete all backups" and the older stuff vanishes.” (http://www.girr.org/mac_stuff/backups.html)
    *TechTool Pro Directory Protection*
    This disk utility feature creates backup copies of your system directories. Obviously these directories are changing all the time. So, depending on how it is configured, these backup files will be changing as well which is interpreted by Time Machine as new data to backup. Excluding the folder these backups are stored in will eliminate this effect.
    *Backups WAY Too Large*
    If an initial full backup or subsequent incremental backup is tens or hundreds of Gigs larger than expected, check to see that all unwanted external hard disks are still excluded from Time Machine backups.
    This includes the Time Machine backup drive ITSELF. Normally, Time Machine is set to exclude itself by default. But on rare occasions it can forget. When your backup begins, Time Machine mounts the backup on your desktop. (For Time Capsule users it appears as a white drive icon labeled something like “Backup of (your computer)”.) If, while it is mounted, it does not show up in the Time Machine Prefs “Do not back up” list, then Time Machine will attempt to back ITSELF up. If it is not listed while the drive is mounted, then you need to add it to the list.
    *FileVault / Boot Camp / iDisk Syncing*
    Note: Leopard has changed the way it deals with FileVault disk images, so it is not necessary to exclude your Home folder if you have FileVault activated. Additionally, Time Machine ignores Boot Camp partitions as the manner in which they are formatted is incompatible. Finally, if you have your iDisk Synced to your desktop, it is not necessary to exclude the disk image file it creates as that has been changed to a sparsebundle as well in Leopard.
    Let us know if any of this helps.
    Cheers!

Maybe you are looking for

  • How to acquire data from multiple dataports at the same time

    Hi, I studied the multithreading section of Labview, but still have no idea how to make it work. Let me briefly explain my situation. I need to develop a program that can control and acquire data from 4 serial ports. I have 4 buttons to control start

  • Content Viewer on different devices

    Basic Question: Once users have downloaded the Content Viewers for iPad and/or Android,  is it possible to upload .folio files to other App markets such as the  new Amazon Android Appstore or Chomp or GetJar?

  • Folder reference using BO SDK

    Please help me with a sample snippet with which I can get access to a personal folder other than favourites folder using ReBean or any other Java SDKs Many thanks in advance Regards Michael

  • Exchange 2010 - PerfMon - Messages Queued for Delivery = 2,147,483,649

    Our monitoring system is alerting Messages Queued for Delivery as 2 Billion messages and the value returned by PerfMon > MSExchangeTransport Queues > Messages Queued for Delivery also matches this number during some samples. I was wondering, what's g

  • CAF-CORe: Access methods option missing in CE7.11

    HI Friends,    I am using Ce7.11 preview version. I have created CAF Project->BO Nodes. Now i  have created Application service .Now i need to create Aceess methods. In NWDS70 we used to have Access methods wherein when we check the CRUD methods, the