IChat worked once, now it refuses!!!???

Hello, getting very frustrated with iChat. I spent a long time researching the necessary settings for my DGL-4300 and finally got it sorted. I was able to One way Video Chat and Two way Audio chat with my dad, that happened all of one time!!!!
These are my settings from PortFoward.com and then another Special Application protocol to use a Trigger to allow Video and Voice chat:
Name: iChat1
IP address: 192.168.1.28 (my iBook)
TCP ports to Open: 16384-16403
UDP ports to Open: 16384-16403
Inbound Filter: Allows Allow
Schedule: Always
Name: iChat2
IP address "
TCP ports to Open: 5190,5220,5222
UDP ports to Open: 5060,5190,5678
Then I have a Special Application Protocol to handle the Trigger:
Name iChatAV
Trigger port Range: 16384-16403
Trigger Protocol: Both
Input port Range: 16384-16403
Input Protocol: Both
Schedule: Always
As I said this worked once perfectly with my dad. It now says "user did not respond" every time. On the other hand I can perfectly contact the apple test accounts (appleu3test01 - 03). What the **** is going on here!!! Are the settings above correct... my dad and I have both got DGL-4300's and have identical settings, it worked perfectly a few days ago and now nothing at all. Yet still the test accounts work perfectly, I have perfect bandwidth (both on 2meg Broadband with Pipex) no other change have been made since it worked!!!! Checked the guides and as far as I can see all is setup perfectly for it to work....
HELP!

Hi Andrew,
I am a little confused about your port set up.
It should be either Port Forwarding or Port Triggering
The Trigger port should be the invite port of 5678
This should trigger port 5060, 16384-16403 if it can be set up with simgle and groups of ports this way.
If not it should be 5678 as trigger to open 5060
Then 5060 as trigger to ope 16384-16403
Ralph

Similar Messages

  • Upgraded to pse 13 worked once now will not open

    uupgraded to psd 13 - opened up once - now will not open

    the opening screen "opens up" and am able to go "online" via 13 - when you go to
    Organizer - will not open - win 7 - 64 - task manager shows it in app's but indicates "not responding" -
    the processes stream shows pse 13 running...  in reviewing threads for this issues there are
    100's of users experiencing the same issue over many generations of pse...  the "fix" should be
    well known to Adobe by now... after 10 hours there is NO clear fix from Adobe - highly disappointing...
    keep in mind I bought pse 10 and that NEVER opened up or worked correctly - now same with 13 -
    unuseable - 10 hours later - three reinstalls and several suggested fixes and I am sure an Adobe pse
    expert could fix in a few minutes what I can't do in 10 hours...  please have a pse expert give me the
    recipe to correct as this is a KNOWN long time recurring issue as documented in any number of
    chat rooms...  thx... 

  • EPrint worked once, now fails every time

    I've been trying to set up ePrint so that my daughter can send things to the printer from her computer downstairs. Our very first test worked - the printer printed out a link to the pdf we wanted to print. We tried having another go so that we could print out the actual file, but now every single print command we send fails. I've tried from my own computer with no luck either. The printer is online, I get the confirmation emails, we have the correct address and we have permission. Does anyone know why we can't get this to work?
    ETA: Reading around, it's looking like it's because the pictures we want to print are too low a resolution. Is there any way to get ePrint to print them? We're trying to print out My Little Pony colouring pictures, so obviously we don't much care if they're photo quality!

    Well, you can change the resolution of the image prior to sending. 
    Is your daughter's computer on the same network as the printer?  If so, she should be able to just send the print job straight to the printer without using ePrint.
    SandyBob
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP
    1-800-474-6836

  • Flash Builder 4 trial worked once, now crashes on startup

    Hi all,
    I am experiencing a bizarre problem with the trial Flash Builder 4 on Windows XP Professional: I first tried the plugin for my existing Eclipse Galileo IDE, and that worked great for a day.  The next morning I try to start up Eclipse and it crashes everytime it gets to the flashbuilder.ui module portion of loading.  I uninstalled the plugin (which fixed Eclipse so that it runs fine now) and instead downloaded the standalone Flash Builder.  It functioned perfectly for the rest of the day, but this morning it crashes immediately whenever I try to start it.  Here is the message I receive plus the error log...
    "FlashBuilder.exe has encountered a problem and needs to close.  We are sorry for the inconvenience."
    Error Signature
    AppName: flashbuilder.exe     AppVer: 0.0.0.0     ModName: updaternotifications.dll
    ModVer: 1.0.0.64     Offset: 0006a8dc
    Any thoughts?

    Hi Joe,
    That's a nasty problem with the original updaternotifications.dll that happens with certain machine configurations.
    There's a Knowledge Base article here explaining how to remedy the problem by downloading a new version of that dll:
    http://kb2.adobe.com/cps/845/cpsid_84586.html
    We also expect to include the fixed dll in automatic updates soon.
    -Chris

  • My University email uses outlook and firefox will not let the page open once i log into the university login. It used to work, but now just shows a completely white tab. My email works fine in other browsers. Why?

    My University email uses outlook and firefox will not let the page open once i log into the university login. It used to work, but now just shows a completely white tab. My email works fine in other browsers. Why?

    Make sure that you haven't left a profiles.ini file.
    * http://kb.mozillazine.org/profiles.ini_file
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Why is my iPhone 5c's home button not working at all it didn't work once for a few minutes then it was normal again now it won't work at all. HELP

    Why is my iPhone 5c's home button not working at all it didn't work once for a few minutes then it was normal again now it won't work at all. HELP

    The screen repair was botched. Take iPhone back to place of screen repair, and have them get the home button working again.

  • HT1766 After during a backup on iTunes I noticed 3 of my contacts are gone and tried to restore from a old backup, worked once and now it won't again. Why iTunes restore work correctly?

    After I did a backup from iTunes I noticed 3 of my contacts were gone and then tried to restore from a old backup, worked once and now it won't again. Why is iTunes restore not working correctly?
    I thought all my contacts were saved in iTunes, never had this problem before. Besides manually restoring them myself, is there any other way to retrive them?

    iCloud
    https://www.icloud.com/

  • IChat worked with my old AT&T DSL Internet, now I have Comcast and error!!

    About two months ago I switched from AT&T DSL to Comcast High Speed Internet. iChat worked perfectly for me with AT&T but now that I have Comcast I havent been able to log into iChat since. It connects, disconnects, connects, disconnects, repeatedly and then I get an error saying ive tried logging in too many times and must wait a few minutes before logging in again. Can anyone please help me? Ive tried looking up and down these forums repeatedly and nothing has helped.
    *Might I add, AOL Instant Messenger works fine on my new Comcast High Speed Internet but iChat wont. I thought iChat ran off of AOL Instant Messenger? Something isnt right and I could really use some help!

    The Home Folder is your Little House icon inside opening the Hard Drive then Users as well as seeing it in th side bar of any Finders window (if you are displaying the side bar.)
    In Column view
    The Icon in the DOCK is a form of Alias to the actual app in the Applications folder.
    Is it still showing the iChat icon of has it become a pencil, brush and ruler ? (May have a No Entry sign on it)
    Can you open the Hard drive and look in (the) Applications (folder) and tell us if iChat will launch from there ?
    10:12 PM Sunday; July 27, 2008

  • Control Center worked once after downloading iOS 7, now it's not working at all.

    I downloaded iOS 7 to my iPhone 5. The Control Center worked once and then stopped. I can't access it from the lock screen or apps, even though both are enabled in Settings. When I double-click the home button when the phone is locked, nothing happens, and in the lock screen, I can see the bar at the bottom to show where to swipe up, but there's no response when I swipe. I didn't change any settings that I know of, and can't figure out how to fix this problem. I really like the Control Center and want to use it!

    My iPad 2 front camera stopped working soon after updating to OS7; coincidence or not I don't know, but once again, since so many others have this problem, I think Apple should take ownership of this issue and come up withy a real fix. I'm tired of hearing 'reboot' as a cure all. Same goes for non-functioning SIM problem still not addressed by Apple.

  • How do I get iCal to sync to my iphone 4. It used to work and now it won't. Any suggestions will be most appreciated.

    How do I get iCal on my Mac to sync with my iphone 4.
    It used to work and now it doesn't.
    I am not on MobileMe or the Cloud.
    Any suggestions will be most appreciated.

    Hi Arezzo
    I'm asuming you are using iTunes then to sync? this can be done over WiFi or the USB cable.
    Review your setting for the calendar sync once iTunes is open and your iPhone is connected. Make sure your Calendars are selected to sync that you need. By default all calendars will.
    So the option i have for you is to reset the sync service and this will reset those settings in iTunes. Meaning that you will have to switch them on again in iTunes to sync. But this mostly clears unresolved sync issues.
    Please do yourself a favour and hit backup in iTunes before doing any testing. iTunes will then keep a local backup of your iPhone in case of any data loss.
    {added}
    open Terminal from your Utilities folder and paste this command in to reset. OS X 10.6 - 10.8
    /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl full [press Enter]
    if it prompts for a password, just type your password and hit [Enter] again.
    Open iTunes then set your syncs up and it should then carry on again.
    Message was edited by: WaldoWTM

  • HT1495 My husband and I share an i cloud account but each have our own separate ipads. We were told this would work, but now I can't find a book that I've downloaded on my ipad anymore. Where would I find it?

    My husband and I share an i cloud account but each have our own separate ipads. We were told this would work, but now I can't find a book that I've downloaded on my ipad anymore. Where would I find it?

    You and your husband can share a store account and still have seperate iCloud accounts for your contacts, bookmarks and stuff like that.  Click here for instructions to make an apple account without entering a credit card.  Make sure you use a different email address for each apple account. 
    Set up your iPhone/iPad whatever using the new account for iCloud.  Then go into settings/store and sign in with your purchasing account, you may need to sign out of the other account.  To the best of my knowledge, your household is allowed to share purchased legally, someone please correct me if I'm wrong.
    Once you each have your own devices set to your own accounts you can set them to backup to that account and it will keep all your contacts seperate.

  • For some reason, I can not delete bookmarks. I did one at a time, then tried 5 or 6 and it worked once then no more. I then tried 1 at a time and it worked once the no more. This is a brand new computer (Win7) and FF just loaded about 3 hours ago.

    # Question
    For some reason, I can not delete bookmarks. I did one at a time, then tried 5 or 6 and it worked once then no more. I then tried 1 at a time and it worked once the no more. Why is this happening? This is a brand new computer (Win7) and FF just loaded about 3 hours ago. Do not know how the bookmarks even got in there. Some were ok, but no order and some that were never bookmarks. Looks like FF tried to import some BM's from the Virtual XP installed, but did not get it any where near right. I need to completely delete all of them and install from a saved .html file.

    Well, I did not see the exact problem that I was having listed in the articles, BUT the problem is solved for now.
    I opened FF and the Bookmarks to Organize again. I deleted all of the folders and entries, ONE AT A TIME, AND IT WORKED. Evidently, for what ever reason, FF did not like "Batch" deletes of ANY amount greater than 1 and the HANG UP would occur.
    Deleting one at a time then importing the good .html from a good file, loaded the wanted Bookmarks. Yea

  • I have been having trouble getting my email on my iPad. It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it. I can send emails, but can't get them

    I have been having trouble getting my email on my iPad2.
    It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it.
    I can send emails, but can't get them.
    Any ideas, people?

    Hi Kharels
    Just posted this reply to 2 others with same sort of question:
    I have the same issue as i have my own email address and only want to use.
    There are two ways around this annoying problem. The first is to set up your own domain email account alongside your iCloud one, and when you go to send each email tap on From and you get a choice of emails addresses to reply from... ie your own domain or the iCloud one.  This is tedious though.
    The other is to set up your iCloud email as normal, then create a new one altogether. Choose 'Other' when creating this new account. Then put for the incoming server mail.me.com, along with your user name and password. For the outgoing server put the server you want to use - ie your own domain one. This is therefore a hybrid account and does work.
    Now switch off the email for iCloud (leaving on Calendar, Address Book etc). Switch on the email for your hybrid account (which of course is iCloud incoming as well).
    Providing you have directed your own domain email address to your me.com one, you will find the iPhone should behave itself and you can use the folders etc and these will synch with your Mac ok.
    Hope this work for you - let us know.
    Simon

  • Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

    Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

    Hi,
    I have the check box on a second Partition  but not on the Time Machine one
    I forget what I did now to get this called "Recovery HD"
    For the rest try https://discussions.apple.com/docs/DOC-4055  User Tip that links to Pondini's work on Time Machine.
    10:17 pm      Friday; May 2, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Why can't I get my printer to print out a playlist from i-tunes? It used to work but now my printer doesn't seem to receive the "print" command.

    Why can't I get my printer to print out a playlist from i-tunes? It used to work, but now the printer doesn't seem to recognize the "print" command coming from i-tunes. The printer works for other applications!

    I  finally solved this problem after toiling with it for a couple of  days.  Solution:  Once you have  burned your CD you must go back into  iTunes to your music/playlists and select the playlist you just burned  and click file; print and you will  get the mosaics that we have been  accustomed to.  I was on hold with  Apple Support when I found this  myself.  Yes......!!! Problem solved..for me anyway.  Good luck!
    Scott

Maybe you are looking for