ICS5.1: Settings in iCS Client are not saved

Hi,
I'm using iCS5.1 on Solaris and the web-client for the users to access the information.
There is a point "options" where the users are able to customize the layout, time-zone and many other things. If they change a setting and push the button "Apply these settings" nothings happens. The "old" value still remains.
Does anybody what this might be??
Thanks in advance
Marcel

Hi,
I also had the problem. Look if the user the calendar server uses to access the LDAP is a user with enough permissions to save configurations in the LDAP.
Best would be to use a "high administrator user, so you're sure it has all the rights to the LDAP
I would also to try to remove the calendar server and install it totally "clean" on your test system. Look then if it still doesn't work with a totally empty database.
Hope this helps!
Greetz,
MH

Similar Messages

DM3.0 EA2: Settings for "View Details" are not saved

Hi,
normally I want to see only the attributes and keys in logical model.
I can change the settings at "View Details" to "Attributes" and "Keys" and the view is changing. When I close data modeler, start it again and open the recend data model, the settings are again on default "All details".
Is this the standard or should the view settings be saved?
I am running Data Modeler on Windows XP with german localization and the JDK 1.6.0_11 from Oracle SQL Developer.
Edited by: db-geek on 17.01.2011 08:17

The settings for "View Details" are now saved and restored, when the data model is opened again.

Upon startup Firefox says "Proxy is refusing connections." When I select "Auto-Detect Proxy" from Advanced settings and solve problem, changes are not saved and upon next startup I must select again...!

Firefox 4 was working fine. Then one day, when I started up Firefox, it says "Proxy is refusing connections." I solved this by selecting "Auto-Detect Proxy" from Advanced network settings, but my changes are not saved and upon every start-up I must select it again! (I even completely removed my webroot antivirus protection, as it as hindering many proxy related programs, but this seems to not be the source of the problem)

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Preferences_not_saved

Form settings are not saved on one client

Hello,
What are possible reasons that form settings like size and position are not saved.
I have one client with SBO 8.8 PL15 installed. On this client this settings are not saved.
So the user has to resize the forms everytime he opens it.
I tried it myself with his SBO user directly on the server and a terminal-server. No problems there, all settings
are saved even if i switch between the systems.
If i am correct these settings are saved in the UserPrefs field in the OUSR table.
Any ideas?
Thank you for all your help.

Hi,
Have you searched the forum?
You may check this to start:
User Settings lost after session is released
This setting is related to client.
Thanks,
Gordon

Server settings are not saved on client

The client has a new workstation (Vista) where the server settings are not saved. The client is able to login but have to setup the server settings overtime she logs on to SAP B1.
Client: Vista
SBO: 2007A SP01
what is causing this and how can this be resolved?

You may check these threads first:
Re: Server name in Change Company does not stay
Re: SQL Connection to SAP Reset
Thanks,
Gordon

SCCM 2012 R2 Clients are not retrieving policy

Hi - I know this question has been asked many times before - but I have tried almost everything and a no closer to solving the problem.
Background: Recently a SCCM 2012 SP1 single stand-alone site was upgraded to SCCM 2012 R2. The site is a single stand-alone primary site with a single DP, single MP, using mixed mode
(HTTP). The R2 upgrade ran without any problem and all SCCM components are showing as healthy.
A few test SCCM 2012 SP1 clients were upgraded to the R2 client using client-push.
However the upgraded clients are not retrieving policy from the Management Point. In the Actions Tab of the SCCM client, only Machine Policy Retrieval and User Policy Retrieval are available. But kicking of those actions does not
result in any of the advertised applications, Task Sequences becoming available. Infact Custom Client Settings are not being set either (e.g. Organisation Name in software Center).
I have checked and rechecked the following:
The upgrade of the client completed successfully (checked ccmsetup.log) and the version number went from 5.00.7804.1000 (SP1) to 5.00.7958.1000 (R2).
The MP health in the SCCM console is showing healthy.
The MP access URL's load correctly when run from SCCm client computers
“http://<ServerName>/sms_mp/.sms_aut?mplist” is ok
“http://<ServerName>/sms_mp/.sms_aut?mpcert” is ok
The SCCM clients are assigned to the site correctly – verified via the SCCM client and
ClientLocation.Log
ClientIDManager.Log is not showing any errors
CCMExec.log and ExecMgr.log don't show any advertisements being executed (Execmgr.log is almost empty and only has "Software ditrbution site settings policy does not yet exist on the client). If the client is not yest
registered this is expected behaviour")
The SCCM clients are Approved and NOT Blocked in SCCM
I have attempted to upgrade the SCCM client and also completely removed and reinstalled - and both have the same result (no client policy dpwnloaded)
I have also deleted the above clients completely from SCCM, Run divoery again and pushed the client to the machines again ...with the same result (SCCM client installs, assigns to correct site and then no policy downloaded)
SCCM 2012 Boundaries are configured correctly and assigned to Boundary Groups correctly
The SCCM client’s do not have the firewall enabled
Changed boundary from AD Site to Subnet to IP Address Range: Same issue exists
Uninstalled MP role and reinstalled it: same Issue exists
Tried to connect to SCCm client using 3rd party SCCM Client center tool but cannot connect
??? Not sure what else to try ???

Hi all - sorry for the late response.
We managed to resolve the issue after logging a job with Microsoft Support.
The issue was that the SCCM 2012 R2 upgrade corrupted 2 tables in the SCCM Database - leading to corrupt SCCM client policies.
I am pasting the resolution email from Microsoft below:
(NOTE: This may not be the exact sypmtoms you are experiencing so do not implement this fix assuming it will fix your problem!)
ISSUE:
- All clients are unable to download policies from the server
CAUSE:
- Bad policies in the Database
RESOLUTION:
-Issue with PADbID - Run below query against SCCM DB to verify corrupt entries:
SELECT * FROM
ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
Confirmed Bad policies entries in the SCCM database
Run below query to delete the bad policy after which we resolved the issue:
Delete FROM ResPolicyMap
WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)"

WRT160NL DHCP reserved clients are not showing up in the DHCP Reservation window.... Why?

I have 5 computers linked to my router. 4 are hardwired and I set it up so that each of the 5 has it's own static address. One of those computers is my DVR security camera system so can monitor my cameras remotely. It was working fine for years and now I can't access the DVR remotely anymore. I notice in the router Setup that the DHCP clients are not showing up as active even though two of the computers are on. I am running XP Pro on these machines and I can PING between them so I know some communication is going on. Also I can access the DVR cameras from my main computer using the internal IP address I assigned to the DVR, but not if I try to use my current WAN IP address.
Would appreciate any advice on troubleshooting this problem.
Thanks
Solved!
Go to Solution.

It may have something to do with the firmware of the router. I suggest you should do that. The firmware that you can download from the Linksys website is version 1.0.0.3 Build 2. (http://support.linksys.com/en-us/support/routers/WRT160NL). After the upgrade, reset the router to factory settings (pressing and holding down the reset button). It is best to re-configure the router from scratch also. Try to power cycle your whole network as well.

Settings are not saving

Hi Guys
I am fairly new to my iMac (since Christmas). Everything was working perfect and now I am noticing that my settings are not saving. Some examples are:
1. I set it so my pictures can be shared with other users. The other users of this mac still cannot pull up the pictures in their iPhoto.
2. I have the settings for software update set to check monthly. Every time I wake up my computer it checks for updates automatically.
3. The log in settings are set to log in without a password every time I wake up the mac and it still requires a password.
What is going on??? It is so frustrating, please please help???

So even after opening iPhoto, there is no file "com.apple.iPhoto.plist" in your ~/Library/Preferences folder (that is in your HOME folder, NOT the Library folder at the top level of your hard drive)?
If so, there is an issue with permissions to write to your ~/Library/Preferences folder. Go up one level to your ~/Library folder (again, the one in your HOME folder), click once on Preferences folder, then chose menu File>Get Info. At the bottom of the Get Info window, next to your user name, the Privilege column should say Read & Write.
If it doesn't say "Read & Write" next your name, you have to change it so that it does. Click on the lock icon in the lower right of the "Get Info" window, enter admin user name and password. Change the Privilege column next to your user name to "Read & Write." Then click on the little gear icon at the very bottom of the Get Info and select "Apply to enclosed items."
You might want to go through that procedure even if it does say "Read & Write" just to make sure, because it really sounds like you have a problem with permissions in the Preferences folder.

With 'Mail v8' and 'Yosemite' accounts settings are not saved and I keep having to check the "SSL" box

With 'Mail v8' and 'Yosemite' 'mail' "account settings" are not saved and I keep having to check the "SSL" box. This has only occurred since upgrade to Yosemite?
Any help would be appreciated as this is so frustrating!!

Update to 3.6.16 has fixed this problem.

When I close CS6 changes in settings are not saved. Reverts to default settings on reopen. Why?

When I close CS6 changes in settings are not saved. Reverts to default settings on reopen. Why?

Sorry Photoshop -- Problems solved -- I read the details -- turns out you need to make changes with no files open for the preferences to apply to all files.
Thanks, Al

Clock and date settings are not saved

clock and date settings are not saved in lion

I'd give AppleCare a call.
AppleCare Support Phone Number: 1-800-275-2273
open 6am to 6pm Pacific Time
International Technical Support Numbers
http://www.apple.com/support/contact/phone_contacts.html
You may want to look under date & time and set the clock from the internet. At least you will have the correct time after a while.
RObert

PROBLEM FLASH : settings are not saved

Hello,
I have a problem with flash recently, i'm using a PPC G4 1,5
GO RAM version osX 10.4.10 2x1 GHZ ( firefox 2007 ), when i want to
set preferences of Flash on the site of adobe it's always getting
by defect preferences when i reload the page for any settings, they
are not saved, i re instal Flash and i clean up cash etc etc but
nothing .... i can't use some softwares and it's tidious .....
Help, thank you .

Thanks for linked document but I find it funny and someone rude that the article assumes that EVERYONE knows the lingo used - i.e. Profile Folder is in "%APPDATA%\Mozilla\" . Where the hell is that???? Jesus, it's much easier to switch to Chrome.

Mail settings are not saved any more

Hi,
after my mailbox structure has crashed, I tried to reset Mail as explained in this answer: https://discussions.apple.com/message/22302114#22302114
After restarting Mail all settings were deleted (as expected) and I set up my accounts and settings again. Then I recognized that the settings are not saved any more. I tried some times but Mail didn't save the settings.
I hope there is a chance to fix this problem.
Thanks for help.

Thanks for linked document but I find it funny and someone rude that the article assumes that EVERYONE knows the lingo used - i.e. Profile Folder is in "%APPDATA%\Mozilla\" . Where the hell is that???? Jesus, it's much easier to switch to Chrome.

Some clients are not receiving my mail attachments.

Some clients are not receiving my mail attachments. Other recipients of the same email DO receive these attachments. It doesn't matter whether it is a jpg, pdf, doc, or other. Sending from gmail or entourage works, only sending from apple mail is a problem. This has been an ongoing problem for me in Lion and Snow Leopard. I'm new to this forum, so not sure I'm posting in the right area, but I've searched for an answer and can't find anything. Do I need a plug-in or something? I like my apple mail and don't want to switch, but this is a real problem for me. Help, please!

We have the same problem in Snow Leopard, so the problem isn't new. I've been researching this for a while now. Based on what I've read in a whole load of discussions it seems it's an issue in the way Outlook reads the e-mails send by Apple Mail. I've no idea of the technicalities of this but one obvious difference is that Mail's default formatting is Rich Text and Outlook's is HTML, but what do I know.
We've done variuos test with our PC based clients but with no success: Send as Icon; Window's friendly attachement; Mail Attachement Iconiser, etc. Nothing gets rid of the problem entirely. We're a Mac based Public Relations agency and we send image to the media all of the time...and we have no guarantees that they are getting through.
It's frustrating that Mail doesn't have an option, as it does for plain text, to send in an outlook friendly way. To me it's a huge problem and if Apple isn't going to sort it, given that Outlook is the choice of Enterprise and 95% of our clients, then we're going to have to spend thousands and switch to Outlook. Apple have gone to great pains to promote cross-compatibility with PC's and perhaps this is one little example of where they could try harder.
Mail has not had much obvious love and attention for a while and if there's an Apple employee looking in on this thread, perhaps it's time to love it up, give it a few more bells and whistles (without over-complicating of course) and make it sing with Outlook.
My last attenpt is to try Thunderbird as a default mail client; I'm told it doesn't suffer from the same PC compatibility issues.

How do I change system settings so that users are not required to enter the mac's admin pw in order to join a wifi network?

how do I change system settings so that users are not required to enter the mac's admin pw in order to join a wifi network?
Right now my macbook pro requires an admin password before connecting to a new wifi network. In other words when a user that is not an admin tries to connect to a new wifi network the pop up displays indicating that it is locked and an admin password is required.
Is there a way to remove this restriction so that a non admin can connect to wifi without the mac's admin password.

You can enable / disable this option in System Preferences:
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab > Require administrator authorization to: Change networks

ICS5.1: Settings in iCS Client are not saved

Similar Messages

Maybe you are looking for