ID CS2 Software issues on multiple drives on Mac Pro

While trying to launch InDesign CS2 on a new Mac Pro I found it did not want to launch from the second drive where I keep my customer files. To resolve this issue I reformated the 2nd HD as a Mac OS Extended (Journeled) format which fixed the problem. I don't understand what makes the differance with the operation but would like to know. Any idea.

I am assuming this is a custom-built dust prevention solution, yes?
Anyways, I received my replacement SuperDrive and just realized that due to Windows and Mac's limitations in regards to hard drives larger than 2.2 TB, I can't have any of my 3TB drives with both OS X and Windows without having at least two separate HFS partitions on them since the Windows partition must be in the fourth partition, requiring OS X to be in partition 2, Recovery in partition 3, and the combined size of these first four partitions must be under 2.2 TB.
At least that's my understanding. I currently have three 3 TB drives and one 1 TB drive (which contains Windows XP and 7 only).
I'm not really not sure if Windows has to be in the fourth partition because as I mentioned, my 1 TB drive has EFI in partition 1, Windows XP in partition 2, and Windows 7 in partition 3. I have OS 10.9 on one 3 TB drive, OS 10.7 on the second 3 TB drive, and no OS on the third 3 TB drive. I would prefer to install Windows 8 on that third 3 TB drive and yet have only one HFS partition because my desktop is already seemingly over-crowded with all the internal drives and partitions it has (I also have a 500GB SSD drive which is my 10.10 boot volume, plugged into one of the two unused SATA motherboard ports).
My plan is to first determine if I can now break the 1 TB drive barrier I ran into before and install two Windows OSs on a 2 TB drive (technically, I am going to clone my 1 TB Windows partitions onto the 2 TB drive). Next, I will attempt to partition a 3 TB drive with Windows 8 in partition 2 and HFS in partition 3.

Similar Messages

Is it OK to use USB 2.0 connection for Glyph external drive and Mac Pro as project drive?

Is it OK to use a USB 2.0 connection for Glyph external drive and Mac Pro as project drive? I was told by Sweetwater tech support to use Firewire, but both the FW400 and FW800 connections crash my audio interface software mixer (Presonus' "Universal Control" software).
Both Firewire connections also create a 10 second hang for each Command-Save that I do.
USB 2.0 for the external drive seems to be working so far, but is there some reason I should be wary of using this as my go-to project drive? In other words, I am imagining that there was probably some definite reason that the tech support guy mentioned not to use it. But maybe not. It's a brand new Glyph. In any event, it's nice to have the 10 second hang eliminated, and I was just looking for some advice, since digging into the Presonus software issue could take some time.

If you have a mac pro, why not stick the external HDD inside via one of your many SATA cables & have it run 9 times faster than your USB?
Or stick a HDD CADDY in your mac pro, so you can slot in a full sized 3TB HDD for recording, and when you are done, pull it out & slip it in an external enclosure if you need to take it places?

How do I put windows on a seperate internal drive in mac pro

how do I put windows on an internal drive in mac pro (not the OSX drive)

Take out all your other drives.
Boot Windows installer DVD like Windows 8 or 7 64-bit Pro.
Install.
Not so hard.
In fact installing on another drive w/o taking out others is much much more complicated and you have to jump through a hoop. And is not even documented! And there is a forum for Boot Camp aka Windows on Mac.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
Boot Camp, Windows 8
General installation questions
What is Boot Camp 5?
Boot Camp 5 is not a release of OS X software. Rather, it is a release of the Windows Support Software (drivers). You will need to use this software on your Mac with Windows 8 or Windows 7. For more information on Boot Camp 5, see this article.
http://support.apple.com/kb/HT5639
Which Macs support Windows 8?
Mac Pro (Early 2009 or newer)
For more information, see this article.
What are the System Requirements for Windows 8?
Please see this article.
How can I install Windows 8 on an eligible computer?
Use the Boot Camp Assistant. The assistant will partition your internal hard drives and install Windows 8. For more information on Windows 8 installation, see the Boot Camp Installation & Setup Guide.

Adding non mac drives to Mac Pro

Please forgive me if this has been answered somewhere already. I've tried searching and I can't seem to find the answer. I am trying to help my nephew order a new Mac Pro on a budget. As I understand it, the Apple branded drives for Mac Pro come with some sort of holder which allows the drive to slide into the bay. Is this holder included in the case or is there any way to buy one for use with a third party drive?

There are trays for four drives, you don't need to purchase any (unless you want spares for more than four drives).
Any SATA drive will work.
I'm not even sure if there is such a thing as Apple-branded which usually would mean specialized firmware only. Physically all drives are just standard drives.
Do make sure though that your nephew is prepared to have a couple (2) of backup drives and maybe a data drive. Having an emergency boot drive plus a bootable backup of the system should never be ignored or skipped.
TransIntl sells extra trays for $29 or 2 for $49, though I don't think you'll need any. For now
300 and 500GB drives go for $68-168 looking at Maxtor Maxline III 300 to WD RE2 500. With MaxLine Pro 500 in-between or WD RE 320, both around $110-120.

Upgrade boot drive in MAC PRO Early 2008 to SSD

Looking to upgrade my boot drive on Mac Pro Early 2008.
Possibly with SSD, but wasnt sure of compatibility. Also, is it a huge sacrafice in storage?
I'd appreciate any assistance.
Thank you!!!
Lyle

Establish a Boot Drive on the fast SSD, and move all User files off to other drives. These articles may help:
Japamac's Blog: Make space for performance -- Moving the Home Folder
http://chris.pirillo.com/how-to-move-the-home-folder-in-os-x-and-why/
OSX Tips: Setting-up a new Mac from an old one or its Backups
Transferring Home Folders not on a Startup volume
be sure to heed Pondini's warning:
If you do put home folders on a separate volume, it's strongly recommended that an Admin account and its home folder remain on the Startup volume. If there isn't one, and you have a problem with the separate home folder volume, you cannot log on to your Mac! And in some cases it will greatly complicatetransferring to a new Mac.
So if you're transferring from an available Mac that doesn't have an Admin account on its Startup volume, create one via System Preferences > Accounts before starting.
I have created a new User Tip with this information in it:
User Tip: Creating a lean, fast Boot Drive

Creating A New Boot Drive For Mac Pro Desktop

I have a Mac Pro 1,1 using Lion:
I would like to create a new and bigger boot drive but having not done this before I would appreciate any direction that would make this as painless as possible. I will continue to use Lion but am a little lost when it comes to doing this with the download process of Lion as well as transferring what has been created on the current HD in the MacPro. I have a new WD Black 2 TB SATA that I would like to use as the new boot drive. Again, thank you for the help.

Don't. Use. 2TB for system. Seriously.
Use that for data.
Get yourself a $89 Samsung 840 120GB instead along with Icy Dock $15. You will. Love it.
You don't need a large drive for the system. All you need to do is MOVE all the data and media files and every thing else, just leave the small 4GB /Users/myuseraccount/Library on the boot drive with the OS and apps. Everything else gets off loaded.
Leave your drive you ahve now as is for backup. Move data and clone the system.
Clone your system:
How to Clone a Volume
Using Cloning as a Backup Strategy
See also Erasing a Drive, How and Why to Partition a Drive, RAID.
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://macperformanceguide.com/Mac-HowToClone.html
http://www.dummies.com/how-to/content/how-to-partition-your-hard-drive-on-mac-os -x-snow-.html
http://pondini.org/OSX/DU.html
How to relocate system and user data to another drive:
http://support.apple.com/kb/HT4337http://chris.pirillo.com/how-to-move-the-home-folder-in-os-x-and-why/To successfully relocate your operating system, user accounts and data from one storage device to another, meet the following conditions:
The destination storage device (SSD drive or hard drive) you are migrating to should be physically located in the same computer. Moving operating system files from one computer to another computer using software not specifically designed for that computer can cause issues due to software, hardware, and firmware version mismatches.
Always back up your storage device with Time Machine or Disk Utility before you start.
Icy Dock $15
http://www.amazon.com/2-5-3-5-Ssd-sata-Convert/dp/B002Z2QDNE/
SSD: Samsung 840 EVO 128GB
http://www.amazon.com/Samsung-Electronics-2-5-Inch-Internal-MZ-7TE120BW/dp/B00E3 W15P0/
2x2GB FBDIMM DDR2 667MHz @ $25
http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/

How to take Auto backup from External Network Drive to Mac pro internal Dri

Hi,
I have a External Network Drive (Buffalo 1TB) which i use as a server, now i need to take auto backup from that external drive to the Mac i am working on, which has 2TB Internal hard Disk.
Please could anyone help me on this.....
Thanks in advance

If you are looking to actually integrate what you have on the external one terabyte hard drive with the 2 TB hard drive you're using inside the Mac the best move for you if you want access to that data when using the Mac Pro server is going into utilities click on the top bar where it says go fall that down to the utilities told them that folder quickly once you are there you will see migration assistant click on that you will be asked to type your admin password to that. It will ask you "how do you want to transfer your information" then select from a Time machine backup or other disk when it asks you will be transferring information to your Mac Pro from your 1 Tb backup external hard drive once it's finished eject the drive or reformat it and use it again if your objective was to infect keep compress the data on the external so you have more space but do not have access to it I strongly recommend Carbon Copy Clone 3.3.1 is 100% free and does a fantastic job here is the link http://www.pure-mac.com/downloads/carboncopyclonerdl.html of copying every block to create an exact replica of your source hard drive. If you want something different and don't mind paying SuperDuper! is a great product as well this WebSite will have many options I would stick to carbon copy clone http://www.pure-mac.com/backup.html I also like EMC Retrospect backup and recovery software for the Mac it is a great product but very much on the expensive side for backup utilities although if you need word offers this might be right up your alley.
I hope I wasn't help,
Sincerely,
Thomas

Installing three SSD drives on Mac Pro

Hello,
I followed the advice given here and bought 3 Samsung 840 SSD drives for my Mac Pro. Two of them are 120GB and one is 250GB.
I also purchased a Tempo SSD Pro 6GB/s SATA PCIe Drive. Only one of them (that holds two SSDs.)
I plan on using:
     • one SSD for the OS and APPS
     • one SSD for a PS scratch disc
     • one SSD for the photoshop, premiere pro, and after effects files I'm currently working on.
I figured I'd keep the 1TB HDD currently used in the computer to store all my other files.
I also have a 1TB seagate extrenal HDD that I would like to set up as a back up or time machine.
Does this sound good?
If so, which SSD do I install in my regular sliding drawer bay? I have 2.5" - 3.5" adapter.
Which two do I install on the PCIe card?
Which on do I use for what?
As you can see I'm clueless. Lol
Here are my specs before adding the SSDs.
Mac Pro
Mid 2012
Processor 3.33 GHz 6-Core Intel Xeon
Memory 48 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software OS X 10.8.4 (12E55)
Storage 1TB Sata disc (423.26GB free),
               1TB External USB Disk freeAgent GoFlex Drive (988.58 free)
P.S. I'm unsure about being able to install my current O.S. on the new SSD. When I bought the Mac Pro it had an older version of OS on it with a free download of the new OS. So the disc will only have the older version. Will I have to pay for the newer one or can I somehow copy it from the current HDD drive it's installed on?
Thank you so much. You have already been a HUGE help in the past posts and look forward to your wisdom. 8 )
Matt

Clone the system to the SSD you plan to use for system.
How much disk space is your system using now? w/o incl. anything in /Users, so just system.
If your system uses 60GB you want to use the 240GB SSD.
I think 120GB is on small side for scratch alone.
move projects to scratch array when you want to work on them: "Work disk + scratch" is fast. Then move them off the array, erase the array, and start a new project.
I would try the 2 x 120 SSDs on PCIe 6G as scratch and see how it feels and works.Try and test. No harm. I think that is what most people do, they experiement and try out different setups to find the one that works best for them.
Important: Have a clone of the system and be ready to restore or move it around as needed.
Install TRIM Enabler of course.
SSD Maintenance
Samsung recommends setting aside 10% for over-provisioning.
Their Windows utility, shame there isn't a Mac version.
#2: Try system on 120GB in drive bay with an adapter
With that then use the other two on the Tempo.
Those could be one large 360GB volume JBOD.
You will have to see how much your scratch space gets used.
I would have argued for 3 x 240GB SSDs. More flexible. Better SSD design - slightly. Adds $140 to the price, even if you had to wait to get 3rd one;
#3 get 2 x 240GB for scratch and projects and 1 x 120GB for system (if your system is less than 50GB)
I doubt you will find the difference of the system on the Sonnet Tempo a deciding factor.
The Sonnet Tempo Pro is for higher I/O RAID, both Tempo cards support 2 x SSDs (I have the cheaper one)
http://www.amazon.com/Samsung-Series-120GB-internal-MZ-7TD120BW/dp/B009NHAF06/
PS: You have Mountain Lion. Buy Carbon Copy Cloner and it will clone the system and create the recovery volume also so you should not need to redownload 10.8.x - and you do not need the DVD with 10.6.4 again.

Swap Hard Drives Between Mac Pro's

I have a MacBook Pro "Core 2 Duo" 2.53 15" (Unibody - Late 2008) that has been upgraded from the standard 320 GB SATA hard drive, to a Seagate 750 GB SATA 16 MB cache 7200 rpm hard drive.
I have recently upgraded to a MacBook Pro "Core 2 Duo" 2.66 15" (SD - Mid 2009) that has the standard 320 GB SATA hard drive.
Both are running Mac OS X Snow Leopard 10.6.8.
I will be selling my older (2.53GHz) Mac Pro but would like to keep my larger hard drive.
Question
Can I simply swap the hard drive out of my older (2.53GHz) Mac Pro and install it into the newer (2.66GHz) Mac Pro, without having to reinstall the Mac OS X software?
I no longer have any of my OS X install disks.
Will the 750 GB hard drive still perform the same in the newer Mac Pro, given that they are running the same OS?
Thanks in advance!

From what I understand the USB/PCIe interfaces are (somewhat) device specific. But it depends on the particular vendor in question.
According to barefeats.com, regarding USB devices:
"...Our only concern was that it {the CalDigit adapter} only worked with CalDigit USB 3.0 enclosures like the AV Drive. They since updated the driver to "unlock it." In fact, all the USB 3.0 results posted above for non-Cadigit enclosures were done with the CalDigit PCIe USB 3.0 host adapter...."
So, for example, the Lacie PCIe adapters are "specific". Only works with their stuff. Originally the CalDigit PCIe adapter was the same: limited to use with their devices only. But they've altered that so that it is more generic. In fact, it was used to test the other USB 3.0 devices in the barefeats tests.
So the CalDigit card, at least, is a more flexible choice.

Adding 1TB or 1.5TB SATA drives to Mac Pro?

When I ordered my Mac Pro the largest hard drive that could be ordered from Apple when configuring was 500GB. Up to 4 of them.
I was wondering if I were to pick up a 1TB or 1.5TB SATA internal 3.5" drive, would it work with my Mac Pro?
I know that "back in the days" of IDE drives, that a motherboards and IDE controllers had a limit to how big of a harddrive they could handle. For example, my old Dual G4 MDD model could only hand 120GB drives, anything over that wouldn't work.
Thanks in advance!
Phil

When I bought my Mac Pro the largest drive I could order was 750G. I've swapped them out and now use 2TB WD Caviar Green SATA 3Gb s Internal Hard Drives. I've had no problems whatsoever and have never had a problem with an internal drive. OTOH, I won't buy Lacie external drives for they've proven to be just bad hardware and stay away from MyBook hard drives. For external hard drives then, BAM, go with the Drobo External Hard Drive Bundle (an external enclosure). It offer four drive bays just like the Mac Pro. Drobo utilizes a revolutionary storage technology that makes it simple for anyone to use, yet is powerful enough for business. Once you experience the power of Drobo, the idea of keeping multiple external drives or a RAID 5 array will seem as antiquated as that 28.8Kbps modem in the back of your closet.
You can load it up with 8 - 2TB WD Caviar Green SATA 3Gb s Internal Hard Drives for a total of 16TB ( 8 internal, 8 external) and not have to worry about backups or space for a few years. The Drobo monitors the external drives and should anyone begin to show a problem or signs of failure, will quickly warn you and shift the data to empty space on any of the other drives allowing you to replace the failed drive.

Installing new hard drive in Mac Pro - question about compatibility.

I'm looking to install an extra internal hard drive in my 2009 Mac Pro, but I need to know if there are any compatibility issues with newer hard drives. I am looking at the Western Digital WD1002FAEX Caviar Black:
http://www.amazon.co.uk/gp/product/B0036Q7MV0/ref=s9_simh_gw_p147_d0_g147_i1?pf_ rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-2&pf_rd_r=1HY9SF4S3JFEA79TK610&pf_rd_t=101&pf _rd_p=467128533&pf_rd_i=468294
Would anyone be able to tell me if this is likely to be compatible with my 2009 8 core Mac Pro? Or if there is anything I should be looking out for in particular? I know pre-installed hard drives are 3GB/s and the above hard drive is 6GB/s, does this matter?

Any SATA drive
About urls:
http://www.amazon.co.uk/gp/product/B0036Q7MV0/
is all that is needed.
For a bit more, WD1502FAEX WD Black 1.5TB
http://www.wdc.com/en/products/internal/enterprise/

Imac hard drive in Mac Pro??

My boss has an Imac drive that had problems, and got pulled out of his Imac.
He wants me to try and recover the data.
Can this drive go in my Mac Pro?
I installed it, but when i tried to boot up, it sounded like a wind tunnel, never booted.
any advice??
Thanks!!

For such situations, always better to slap drive into a USB/FW type case and boot the computer and only then try to mount the drive.
The systems are different, your Mac runs 10.4.10 even now?
There is a nice thread or two over on OS X on recovery software and tips.
http://discussions.apple.com/thread.jspa?threadID=2611678

Replacing Hard Drive in MAC Pro

Sorry if this has been asked. I purchased a used MAC Pro from a friend that needed money. The hard drive is too small to accommodate all the software on my other MAC so Migration Assistant will not work. I know how to put secondary drives in and format them. How do I replace the primary drive with a larger one? I don't know how to install a clean hard drive on a MAC and start from scratch. I am also planning on adding more RAM but I do know how to do that. Thanks

Pretty simple on the Mac Pro. Just pull the tray with the primary drive out (there are no cables to worry about) and then also pull out one of the secondary trays. Put a new drive in one of the secondary trays, then slide it into the primary slot, and put the former primary drive into the vacant secondary slot.
Then you just install a fresh copy of OS X from the install DVD. Just put it in the drive and hold down "C" at boot. Then follow the instructions on screen, and Migration Assistant will pick up the second drive and do it's thing.
Finally, Mac is not an acronym so doesn't need to be in all caps. It's short for Macintosh... Like the apple you can buy in a grocery store.

HT4818 Boot from laptop's Windows Hard Drive in Mac Pro via Boot Camp

I have a work laptop that is on Windows 7. It's a work hard drive so I don't want to mess with it (particularly as it's encrypted). I basically want to use it on my Mac Pro rather than my piece of junk standard issue laptop when I'm working from home.
What I would like to do is pull the drive out, put it in my Mac Pro and boot from it using Boot Camp. Guidance I've seen so far talks about not being able to use an external drive but having to partition an internal drive. However, if I've got everything on a separate drive (i.e. my laptop's drive), will this work?
Thanks!

Thanks for the quick (and no nonsense) response!

Replacing a 250G Hard drive on Mac Pro

Does anyone have a good idea on how I can replace my modest 250G hard drive with a new 500G WD without having to reload all the software. In other words just mirror the drive to the new one?
Thanks....
MAC PRO 2.66 8G of RAM Mac OS X (10.4.9) FCP 5.1.4
MAC PRO 2.66 7G of RAM Mac OS X (10.4.9) FCP 5.1.4

With both drives installed. This is the simplest way:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
For added precaution you can boot into safe mode before doing the clone.
You will need to first prep the new drive before the above. Follow this procedure:
Extended Hard Drive Preparation
1. Open Disk Utility in the Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Click on the Option button and be sure the selected partition scheme is set to GUID. Click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.

ID CS2 Software issues on multiple drives on Mac Pro

Similar Messages

Maybe you are looking for