Id & password fails when activating cs5

using my id and password the same as the forum's' which always worked for me
adobe fails to login and activate cs5 version can't imegine the reason .
anyone has some idea ??? please help

The Adobe ID has nothing to do with activation, it is only required for CS Live services. Call support by phone regarding serial number issues. nobody here can help you with that. As for the rest simply check your networking stuff - sounds like a generic outbound connection problem/ failure/ blockage. Could be anything from your router to security tools...
Mylenium

Similar Messages

I am getting a Changing Password Failed error when I try to join an active directory

I had a working AD configuration under Snow Leopard. When I upgraded to Mountain Lion, my account was no longer in sync with the domain. I got the red dot on the login screen and my domain password was out of sync. I unhooked from the domain at that point. This was several months ago.
However, over the last few weeks, I keep finding myself locked out of the domain. I suspect it's something on my Mac that is trying to use my old credentials. I was hoping to rejoin the domain and see if I could get my account back in sync. When I get a domain admin to enter his password on the Directory Utility join screen, it first notes that the computer account already exists in the domain. I tell it to continue, but I can't get past this point:
2013-06-24 14:21:20.729935 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - Computer account either already exists or DC is already Read/Write
2013-06-24 14:21:20.732774 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - existing record found 'CN=MYMACHINE,OU=Default,OU=Workstations,OU=MyCity,OU=North America,DC=GLOBAL,DC=OURCORP,DC=NET'
2013-06-24 14:21:20.732822 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7faef36ed770'
2013-06-24 14:21:20.733141 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm GLOBAL.OURCORP.NET flags 2
2013-06-24 14:21:20.734196 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 12
2013-06-24 14:21:20.734221 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 10.22.94.212:kerberos (1.2.3.4)
2013-06-24 14:21:20.741380 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 10.22.94.212:kerberos (1.2.3.4)
2013-06-24 14:21:20.741416 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context done: 0
2013-06-24 14:21:20.741619 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - trying to set password
2013-06-24 14:21:20.741637 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - trying to set password using: MS set password in realm GLOBAL.OURCORP.NET
2013-06-24 14:21:20.741648 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - using TCP since the ticket is large: 1560
2013-06-24 14:21:20.741665 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service change_password for realm GLOBAL.OURCORP.NET flags 2
2013-06-24 14:21:20.742867 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 12
2013-06-24 14:21:20.742908 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 10.22.94.212:kpasswd (1.2.3.4)
2013-06-24 14:21:20.745231 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 10.22.94.212:kpasswd (1.2.3.4)
2013-06-24 14:21:20.745250 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context done: 0
2013-06-24 14:21:20.745398 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - set password using MS set password returned: 0 result_code 3
2013-06-24 14:21:20.745417 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Changing password failed for '[email protected]' with error '' (3)
2013-06-24 14:21:20.745426 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - setting Computer Password FAILED for existing record - 5103
2013-06-24 14:21:20.745818 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - ODNodeCustomCall failed with error 'Credential operation failed' (5103)

Reggierror,
Had the same issue and discovered that I made my AD object name too long (16 instead of 15 character which is the limit) You might want to try making the computer object name shorter if you can.

I created a second email account with a password but when I try to get mail for it and I put in password it says login failed. Why? and how do I fix it.

I created second email account ([email protected]) with a Password but when I try to get mail and enter password, it says "Sending of Password did not succeed. Mail server mail.comcast.net responded: login failed". What am I doing wrong?

Have you logged on to the webmail account using a browser and enabled either Pop or Imap forwarding for that email address?
Have you created a mail account in Thunderbird that uses the chosen webmail forwarding option?
Password - make sure caps lock is not switched - it must be the same password you use to access the webmail account.
check:
Tools > account Settings > Server Settings
username = full email address
Please post info:
In Thunderbird
Help > Troubleshooting information
click on 'copy text to clipboard'
paste info in this question
edit /remove all info on fonts and printers.

My boyfriend knew my apple id and my password and when we broke up he changed it and he changed my alternate e-mail address so i cannot restore it. The problem is that my iPhone activation is linked to iCloud. What can i do? I have old pass and e-mai

My boyfriend knew my apple id and my password and when we broke up he changed it and he changed my alternate e-mail address so i cannot restore it. The problem is that my iPhone activation is linked to iCloud. What can i do? I have old password and old alternate e-mail.

Take it and its purchase receipt to a physical Apple Store and/or click here and contact Apple's Account Security team.
(124839)

Getting an "installer failed to initialize" error when installing CS5 from CD

Getting an "installer failed to initialize" error when installing CS5 from CD
Mac OS X Version 10.7.5

Try using the Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS5:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Downloaded music apps o.k. Says login failed when I put in user and password. No trouble when getting any other apps.

Downloaded music apps o.k. Says login failed when I put in user and password. No trouble when getting any other apps.

Sounds like you may have deleted something you shouldn't have. Boot to an OS X DVD or a bootable backup, and using Disk Utility, do a repair disk, and while there repair permissions. Disconnect any peripherals, and reboot. If you get the same startup behavior, do a safe boot, by holding the shift key down when booting. If that works, try a normal boot. If neither step helps, you may need to relaod your operating system.

When I try to download ios 7.1.2 I am asked to enter password. When entered I receive a failed msg. The password works for iTunes.

I Am trying to download IOS 7.1.2 on my iPad and iPhone 5C. When I start the process, a window appears asking for my password. When I enter it, I receive a failed msg. The password works when I go to iTunes. I tried changing the password and still could not download ios 7.1.2 because I still received the failed msg when I entered the new password.

The passcode being requested when updating the IOS version is the 4 digit passcode(or passphrase if not set to simple) used to wake your ipad, not your Apple ID password.

I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting, but the password from the old computer in when waking the computer from sleep.

I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting the new computer, but the password from the old computer in when waking the computer from sleep. I want to use my iCloud password on both computers consistently. How can I fix this?

The only other place to change a password for the computer login is in Users & Groups preferences. But I don't really know enough here to fix your problem. You can try fixing the keychain:
iCloud- Frequently asked questions about iCloud Keychain
Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com.

Difficulty in Activating CS5.5 Design Standard

I am getting really frustrated with the difficulty of activating my Creative Suite 5.5 and am wondering if anyone with sufficient technical knowledge can assist me.
I purchased and installed my CS5.5. around a week ago, and have been using it every day since. However, today, I received an error message stating that Adobe is unable to activate my software. If I fail to activate in within a certain number of days, the programme will cease to function. Following the error message, I tried to activate it through the internet, but I kept receiving the error message that the computer was unable to connect to the internet. There were no issues with my internet connection because I was able to surf the internet. And to be sure, I also did the "cmd -> ping activate.adobe.com" thing that Adobe website suggested. Still, there was no conclusive help.
So I spoke to the support team through the online chat support service, and the support officer asked me to call the technical support. When I called the hotline, I found out that technical support was closed for the day and the support is only available from Monday to Friday, 9am - 5pm. However, the problem is that I have neither phone access, nor access to my personal computer (which I had installed the CS5.5 on) during their opening hours of Monday to Friday, 9am - 5pm. The nature of my day job is just such that I just do not have convenient access during the day. So in desperation, I approached the live-chat support team the 2nd time to ask if there is any alternative to getting technical help other than via phone call during office hours, and unfortunately I was told by the officer that there are no other ways of reaching the technical support.
Basically I am stuck with my un-activated CS5.5. and I'm desperate because 1) I have some assignments to rush using the CS 2) It is too costly an item for me to just let it go like this! I have tried uninstalling and reinstalling, disabling my firewall etc but all these efforts are to no avail.
I wonder if anyone has ever faced a similiar problem and how you managed to resolve the issue? Is there anyone who can please help me??

Hi Munish,
Thank you very much for offering your help.
I have resolved the problem by doing what one of the users in another forum suggested. Here are the steps for anyone who may possibly face the same problem as I did.
Please go to this URL: https://activate.adobe.com/test
If you receive an "error" 404 message then please do the following:
Check the host file
Windows 32 bit and 64 bit
Locate the hosts file.
Click Start, click Run, type "%systemroot% \system32\drivers\etc" and then click OK.
Right-click the "hosts" file and select Open. Select Notepad for the application to open the hosts file.
Save a backup of the file. Choose File > Save As. Name the file hosts.backup and click OK.
Find 127.0.0.1 activate.adobe.com and delete this entry.
Save the file and close it.
If you receive a "status" 404 message then please try the steps here:
http://kb2.adobe.com/cps/897/cpsid_89743.html

Update failed when adding email

Hi please can someone help me. I have a curve 9320 and had my work emails and hot mail on my phone. My work emails stopped coming through and after attempting to fix the issue, I deleted my work emails from my phone. When I try to add the work email again it keeps saying update failed. The IT dept said I need to change the mail server settings. Does anyone know how to do this or even if this is what the issue is? Thanks

Hi and Welcome to the Community!
Is your work email account a BES/Enterprise account? Were you able to, with that, synchronize wirelessly calendar, contacts, tasks, and memos? If so, then your IT folks must resolve this BES activation issue.
If you only had email, then it likely was not BES, and instead acted just like any other "personal/internet" email account. But, I cannot quite tell what you are doing and what your IT department is recommending.
If you are using the on-device email wizard and providing only the email address and password yet it is still failing, then that could be what they are referring to. If the server does not respond with the proper server settings (e.g., port, server address, etc.), then the wizard will indeed fail.
To bypass the wizard and force the ability for you to provide those additional details, you need to provide a correct email address, but an intentionally incorrect password. When the screen repaints, the same fields will be visible, but an additional "tic box" for "I will provide these settings myself" (or something similar) will be added...tic that box and proceed, and you will be presented with a screen on which you can manually enter all of the necessary details.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

SDM failed when deploying a Web Dynpro application

SDM failed when deploying a Web Dynpro application - I get the following error message:
Sep 19, 2006 2:25:34 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : eix-blade-011
SDM port : 50118
URL to deploy : file:/D:/DOCUME1/AMRM1.AZI/LOCALS1/Temp/temp43621sap.comwelcome.ear
Deployment exception : Server eix-blade-011 did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server eix-blade-011 at port 50118: eix-blade-011
Inner exception was :
Server eix-blade-011 did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server eix-blade-011 at port 50118: eix-blade-011

Amr Azim,
You must have logged in thru a dedicated connection to any server through say VPN before deploying.This way the sdm uses the same login as that of already establised connection.
So 'sign of' all connections to any servers before deploying and redeploy your application.Here you will be prompted to supply the sdm password and deployment shall proceed.

Error when activating update rule

HI BI Expert,
The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
Thanks.

Hi,
When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
Rgds,
Vikram.
Rgds,
Vikram.

On my iphone, icloud is set to an apple id that i no longer use and i keep getting asked to enter a password. Cannot remember the password. When i try to re-set the password, it sends a email to a address no longer used. Will not accept any dob i enter

I have icloud on my phone with an apple id that I no longer use. I keep getting asked to enter the password for this ID. However I can't remember the password.
When I try to re-set the password, a e-mail will be send to an address I no longer use and can't access.
I then try to answer the security questions, but the date of births I enter are not accepted
Any ideas?
Paul

Welcome to the Apple community.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

Error occurred while deciding partition number,when activating DSO data.

HI all,
I have 2 requests in my DSO,when i activated the data for the 1 request manually it worked fine.But when activating the 2 nd request.It failed giving me the following error.
Error occurred while deciding partition number,
PSA update failed
Process 000002 returned with errors
Process BCTL_D4A4RYBAVI2HZ9FAMIP9TNMAI could not be terminated. Terminate manually
Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0
Log for activation request ODSR_D4A4RYBAVI1QAN3JAZ9NR880Q data package 000001...000001
Errors occured when carrying out activation
Analyze errors and activate again, if necessary
Activation of M records from DataStore object 0FIGL_O02 terminated
Report RSODSACT1 ended with errors
Job cancelled after system exception ERROR_MESSAGE
Please advice on how to resolve this issue.thanks in advance

Hi Shambhu,
thanks for your reply.
I tried activating again.but it failed.Problem is it has about 10 mil records and this load is very important to be done within next 12 hours.
I had deleted a PSA request but when i looked into the table RSTSODSPART,i have a PSA request not checked for Deletion flag.I am not sure why this happened.Does this have anything to do?But i also have another question,if i load from PSA was successful,i dont see a point as why the second load would error out.In that case is there anyway to delete one particular entry in that table.
Please advice

Creation of PSA failed during activation of DTP

Am I forgetting something, did I do something wrong?
Problem:
I get an error message when activating a new DTP that says: "Creation of PSA /BIC/B0005668 failed". That's it. It does not finish activation. No short dump, no SM21 log.
Background:
We are on BI 7.0. I have an existing line item DSO (created in 3.5). I created a new cube to be loaded from DSO. Transformation from DSO to cube is complete and active.
Solution:
I have checked this forum (maybe not thoroughly) and OSS without success. Deleted and recreated DTP several times with same result.
Any suggestions?

"Why are you using export datasource here when you created TRFN and DTP ?"
I'm not. I tried to generate one from DSO just to see if PSA was created there. That worked.
"Which datasource is inactive ?"
None. DS to DSO is active.
"Flow in this case should be :
Sourcesystem - Execute Infopackage - DSO - Execute DTP - Cube"
Yes, that is how flow is set.
"Make sure the DSO is active, TRFN is active and try to activate the delta DTP - Are the source and target correct for the DTP ?"
DSO is active with data loaded and activated from source system. Transformation is active. Tried creating a Full and a delta DTP with same results. Using correct source DSO to correct cube for DTP.
Thanks for your input.
Al

Id & password fails when activating cs5

Similar Messages

Maybe you are looking for