IDE: Child movieclip timeline changes don't show in parent timeline?
Why does a child movieclip only show the first frame within the IDE, regardless of where you are in the parent timeline?
If you throw a movieclip with 25 frames onto the main timeline, which also has 25 frame, you don't see the nested movieclip's frame-progress while you scroll through the main timeline.
Is there a setting somewhere in preferences or somewhere that will enable you to see a nested movieclip's frame position from the main timeline? Like you do with After Effects composites?
The best answer I can think of is that's the way it is. Movieclip symbols in a timeline only display their initial frame contents. If you traverse the containing timeline, you aren't traversing the timelines of the objects contained in it. That helps keep main/containing timelines small.
Darn, thanks Ned. I wish this were not the case, as it would be very useful to see what's actually going on. I've not looked into graphic symbols, maybe I can use them, thanks!
Similar Messages
-
Folio changes don't show up in the app
Hi.
We have two folios in two different apps on which our changes don't reach the app.
If we update the folio, there is no "Update" button.
If we unpublish it, it stays in the app.
If we republish it with new content under a new product ID, the old folio can still be downloaded but the new one cannot.
Other folios in the same app are working as expected.
Sounds like a problem with the publishing servers. Can anyone confirm that?
Or is it something else? If so, how can it be solved?
Thanks in advance!
ToniCall enterprise support and ask them to look into it. It's rare, but sometimes there is a weird state a folio can get into, and this might be one of those cases.
Contact information can be found by logging into http://digitalpublishing.acrobat.com and looking at the bottom middle of the page.
Neil -
I have removed a dropdown box from an asp page and replaced
it with a text entry box. When I run the page in the browser, the
dropdown box remains. I have verified that the page on the server
reflects the changes. I have cleared out any cached pages in my
browser. Can anyone help with this problem? Thanks.Rename the file on the server. Browse to the old file name.
If you are not
getting a 404, then you are not renaming the same page to
which you are
browsing. There's no other explanation.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"JFMOYN" <[email protected]> wrote in
message
news:fgfo44$cpm$[email protected]..
> *ACE*,
> It must be a time warp. Here are a few other things I've
tried.
>
> 1. Accessed the site from a computer that hadn't been
there before.
> 2. Duplicated the page, redirected the site to the new
page. (curiously,
> that
> edit worked.)
> 3. Renamed the duplicate to the original name,
redirected the site to the
> renamed page.
>
> In each case, the text box does not show, the dropdown
box does.
> -
Help! Files say published but changes don't show?!?
www.digitalsuburbia.net
I have been battling with this issue for the last week now. Click on the link Senior Portraits - Click on Senior Gallery - all you will see is a "return to menu" link. The photographs do not show. In my iweb application the photos show on the page. The page is correctly hyperlinked. I have deleted and recreated the page several times and relinked the hyperlink to the new page. I have no idea what else I can do to make this work. HELP HELP HELP!!!!!!Ok, so when I looked at the file itself on my desktop I thought the images were there. I did not know I could view the webpage from my desktop. When I viewed the webpage the pictures are not there.
I am publishing to a mobile me server I think. However, I'm not sure. I am using go daddy just for the domain name.
When I do the command option a under the "commercial section" I get the following - I have absolutely no clue what this means. All I know is that my photos aren't there.
http://www.digitalsuburbia.net/Digital_Suburbia/Commercial.html
http://www.digitalsuburbia.net/Digital_Suburbia/Commercial.html
http://www.digitalsuburbia.net/Digital_Suburbia/Commercial.html?wsc=entry.js&ts= 1251926412166
http://www.digitalsuburbia.net/DigitalSuburbia/Commercialfiles/Commercial.css
http://www.digitalsuburbia.net/DigitalSuburbia/Commercialfiles/Commercial.js
http://www.digitalsuburbia.net/DigitalSuburbia/Commercial_files/shapeimage1.png
http://www.digitalsuburbia.net/DigitalSuburbia/Commercial_files/shapeimage2.png
http://www.digitalsuburbia.net/Digital_Suburbia/Scripts/iWebDebug.js
http://www.digitalsuburbia.net/Digital_Suburbia/Scripts/iWebImage.js
http://www.digitalsuburbia.net/Digital_Suburbia/Scripts/iWebMediaGrid.js
http://www.digitalsuburbia.net/Digital_Suburbia/Scripts/iWebSite.js
http://www.digitalsuburbia.net/Digital_Suburbia/Scripts/Widgets/Comments/Comment s.css
http://www.digitalsuburbia.net/Digital_Suburbia/Scripts/Widgets/Comments/Comment s.js
http://www.digitalsuburbia.net/Digital_Suburbia/Scripts/Widgets/Comments/localiz edStrings.js
http://www.digitalsuburbia.net/Digital_Suburbia/Scripts/Widgets/DetailView/Detai lView.css
http://www.digitalsuburbia.net/Digital_Suburbia/Scripts/Widgets/DetailView/Detai lView.js
http://www.digitalsuburbia.net/Digital_Suburbia/Scripts/Widgets/DetailView/local izedStrings.js
http://www.digitalsuburbia.net/Digital_Suburbia/Scripts/Widgets/FooterControls/F ooterControls.css
http://www.digitalsuburbia.net/Digital_Suburbia/Scripts/Widgets/FooterControls/F ooterControls.js
http://www.digitalsuburbia.net/Digital_Suburbia/Scripts/Widgets/HeaderControls/H eaderControls.css
http://www.digitalsuburbia.net/Digital_Suburbia/Scripts/Widgets/HeaderControls/H eaderControls.js
http://www.digitalsuburbia.net/Digital_Suburbia/Scripts/Widgets/HeaderControls/l ocalizedStrings.js
http://www.digitalsuburbia.net/Digital_Suburbia/Scripts/Widgets/SharedResources/ WidgetCommon.js
I thought this was supposed to be an easy way to have a website but it's starting to be a real pain. Any and all help that I can get to get this fixed will be greatly appreciated. -
Hey everyone!
I'm having this weird problem where I connect to the site i'm working with just fine, and changes i make locally and
"put" are reflected in remote view in dreamweaver......everything looks good...but when I go online...the changes are not there...
I checked the site info in "manage site" and everything looks good....
Any ideas?????????????????????????????????????????I just can't seem to figure this out...but i do have new info
when i upload through dreamweaver it does seem to appear here:
ftp://ftp.corefitaustin.com/CoreFitRyanMainBoot.html
But does not appear here
http://www.corefitaustin.com/CoreFitRyanMainBoot.html
(notice the menu bar just below the slideshow - theyre different)
how do i ping or do nslookup? -
Recently I've come across an issue I've never seen before. I drop a clip into a video track, trim it, change opacity fades and render - works fine.
Then I tweak the opacity, filters etc., but the render bar doesn't turn orange and my changes won't preview. It still plays back the last rendered version, and any re-rendering or changes won't apply.
I have to delete the clip, bring it back into the track, and re-render.
What is up?Might simply trash your render files. The tool to do this is in the tools menu.
Does this happen with every new sequence in every new project now? or?
What format are you editing, and post the OS, Version of QT and Version of FCP you're running on which Mac?
Jerry -
Items in Subfolder don't show in Parent foler
In the Library under Folders, let's say I have a Folder with 10 images called "Orignal", I right-click (or click the plus icon) to * Create folder inside Original* and I move 5 of the 10 images into the new subfolder, ok?
Now, the Parent folder only shows 5 images, shouldn't it show all 10? (5 in the Original + the 5 in the subfolder)
Is there something I'm missing?
Tiger 10.4.11, LR 2.1
TIA,
GeoffI can confirm that this happens on my system. LR 2.1 64bit on Windows Ultimate 64. I can reproduce this action every time by:
Action:
(Make sure File-> Library Filters-> Include photos in Subfolders is checked)
Have a folder A with no sub folders and x photos shown in LR
Use LR to create two sub folders under A, call them B & C
Use LR to create one sub folder under B, call it D
Move 1 photo from A to D
Move x-1 photos from A to C
Select A and no photos are shown (bug)
Select C and x-1 photos are shown (OK)
Select B and no photos are shown (bug)
Select D and 1 photo is shown (OK)
Exit and restart LR and all folders display as they should:
Select A and x photos are shown (OK)
Select C and x-1 photos are shown (OK)
Select B and 1 photos is shown (OK)
Select D and 1 photo is shown (OK)
For me all folder counts were correct before and after restarting LR.
I've just gotten into the habit of exiting and restarting LR whenever an anomoly shows up. Inconvenient--yes. Fatal--no (at least not so far) -
Please help ASAP.
Specs: IOS 10.6.8
Processor 2.4GHz Intel Core i5
Memory 4GB 1333 MHz DDR3 -- Everything is edited, sourced, and stored on an 2TB external hard drive to make things go faster.
Editing with FCP 7
When I export the sequence I edited with quicktime, the playback video is very different from what I edited on the timeline. The playback has the clips with ins and outs that are way off than what I cut, and some of the clips don't show at all or have changed transitions. However when I play in the timeline in FCP, the sequence is fine, just the way I cut it.
The source of the clips was one long .mov that I cut into clips for the timeline. Everything has gone smoothly but the exported .mov is just so different.
How can I get the time codes of the clips to be the same in the exported .movs? I just want the quicktime .mov to represent my edit exactly.
This video is due tomorrow - if the solution is too time consuming, can I play within the FCP player window and Log and Capture?
Thanks,
MVWhat is your source material? Is it H.264? FCP does not work correctly with that material.
Click on a source clip in the FCP Browser, and once selected, type Command + 9 to see the item properties for the clip. Either report those properties, or take a screen shot of the item properties, and post that here.
Next, click anywhere in your timeline, and then type Command + 0 {zero} to see your Sequence Settings. Either report those Sequence Settings, or take a screen shot of the Sequence Settings and post that here.
MtD -
Audio tracks don't show up properly on sequence when enlarging timeline
On the timeline, audio tracks don't show up properly, by either appearing out of sync or by repeating itself when I enlarge it to work on it. Other sequences in the project work fine, and I've tried coping a pasting this sequence or parts of it to a new one and I still have the problem. Attached below is an example of the problem. This sequence is about 40 minutes long. Thanks for any help. Lucian
Is it the same if you uncheck the rectified audio box?
-
Changes in my website don't show up
For 8 days now I have been struggling with this problem and now I'm starting to suspect something about my internet connection, though I only notice the problem when working on my website.
I have a self-hosted Wordpress website. Starting 8 days ago, whenever I made a change in the back end, such as change my layout or add a widget, the change does not show up when I reload my website for a long time (like a half hour).
This happens in all three browsers, Safari, Firefox, and Chrome.
This happens with any theme I choose to use.
Yes, I have cleared my cache and history. And it happens in Private browsing too.
WHY? Can you tell me why, and how to get this fixed? It's really hard to create a website when I can't see the changes right away.
Solved!
Go to Solution.Update to this problem . . .
A Bluehost tech did a trace route that showed Verizon is the problem. I don't totally understand, but it's like Verizon isn't letting me getting into Bluehost (at least not timely; since the changes do show up eventually). Here's a copy of the traceroute:
trace to you It stops at verizon if this is your ISP then we connected to you.
traceroute to {edited for privacy}, 30 hops max, 60 byte packets
1 10.200.15.252 (10.200.15.252) 0.579 ms 0.567 ms 0.561 ms
2 gw20.bluehost.com (74.220.198.1) 1.338 ms 1.565 ms 1.764 ms
3 69.195.127.3 (69.195.127.3) 2.294 ms 2.559 ms 2.437 ms
4 port100.ar05.prov.acedc.net (199.58.199.117) 12.883 ms 12.890 ms 12.879 ms
5 10gigabitethernet3-4.core1.slc1.he.net (66.160.133.117) 3.898 ms 2.913 ms 3.075 ms
6 10gigabitethernet6-2.core1.den1.he.net (184.105.222.153) 22.869 ms 20.853 ms 20.883 ms
7 den-b1-link.telia.net (80.239.133.29) 15.307 ms 14.928 ms 15.626 ms
8 chi-bb1-link.telia.net (213.155.133.190) 39.003 ms chi-bb1-link.telia.net (213.155.133.172) 39.612 ms chi-bb1-link.telia.net (213.155.130.136) 39.446 ms
9 GigabitEthernet2-0-0.GW2.CHI13.ALTER.NET (157.130.107.121) 43.554 ms 43.319 ms 43.197 ms
10 P13-0-0.CLPPVA-LCR-02.verizon-gni.net (130.81.23.0) 64.140 ms 64.436 ms 63.780 ms
11 ge-1-0-9-1202.CLPPVA-VFTTP-302.verizon-gni.net (130.81.188.59) 69.612 ms 68.903 ms 68.646 ms
12 * * *
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
Another Bluehost tech suggested I go to the library and try making some changes to my website there, and see how quickly they appear. That went fine, the changes showed up immediately, but actually made the whole thing more confusing because it turns out my library uses Verizon for their ISP too.
I tried to get help from Verizon anyway. That was a fiasco.
I didn't come back here to the forum right away because I hadn't even gotten any response to this post yet. I wanted to find a live chat, but didn't at first. Then I decided to download the In Home Agent, which is a joke; it's just like downloading an annoying FAQ to your computer (and later I found out it's very difficult to uninstall). But I found the live chat button in the home agent, and spoke to a guy who didn't have much to say, quickly telling me that because it was a website issue I should email [email protected] He didn't even want to see the traceroute
So I did. They were worse than unhelpful, to the point of condescending. After explaining my problem, including the fact that I've been working with Bluehost for hours over the last 8 days, their entire answer was, "You are not hosting your domain with us but with bluehost.com"
To that ridiculous response, I replied, "Of course I know where I am hosting my website! I was told by the Verizon live chat guy to write to you. And doesn't the trace route show that Verizon is the issue, like Bluehost is saying?'
His entire response was just two links, no other text. The first link took me to my Whois, as if he didn't believe I know where I'm hosting, and the second was to Bluehost's contact page. Unbelieveable!
I did go back to talk to Bluehost some more, where they're always friendly and helpful, but he confirmed what two others have already said, that that traceroute shows that Verizon is stopping my website from reloading quickly.
I looked for a Verizon email address but can't find one. I don't want to sit on hold on the phone with a Verizon agent. So I guess I have to write here.
I've read a lot of negative things about customer service at Verizon. Please prove them wrong and help me fix this problem. Thank you. -
Lightroom is not saving metadata. I have done several things to save and I still get the tag that states is is not saved. I have also created 2 smart collections. One showing metadata has been changed and one showing metadata is not up to date. No matter what I do it is not showing in LR that it is saved. I spent 2 days with Seth Resnick trying to correct this and we re created my catalog. It was ok, until I imported new images and same problem. Now I have a new problem, when I bring image to PS it saves it but does not bring back to LR. Am I the only one out there who has this problem?
See:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities -
Changes to topics don't show up in chm & topics are duplicated
I imported a RoboHelp 5 project into RoboHelp 7. When I edit
a topic, save, and generate the primary layout (chm) the changes do
not show up in the chm unless I access the topic through the TOC.
Also, duplicates of every topic show up in the .chm when I search
on a topic title: one with old out of date stuff that I don't know
where it's coming from and one that gets a "The page cannot be
displayed" message.
I am soooo confused.Hi, Hammer Chick,
Here are two recent threads where other users have reported
similar problems:
"Multiple/broken/repeated
listings in Search results"
"Double-entry
Search results!"
So the proposed solutions are:
1) Make a backup of your project, and then rename the .cpd
file and reenter your project.
2) Try creating a new single source layout.
3) Check the hyperlinks in your topics for any that
inadvertently point to target topics that are above the root folder
of the help project.
Pete -
There was an option, provided by itunes, while updating ios, saying 'download and update', 'download only', 'cancel'. I accidentaly checked 'don't show this message again'. and now i want to change my preference. How to get it back please?
hello , i did exactly the same thing , and my app store icon look like this :
http://i.imgur.com/FIrph.png
so can you tell me how did your friend send the app store for you? please -
i just change country account id from us to thailand .now i can't update apps that i use to buy when my account in us from itunes .all of apps(us id) don't show up in Purchased also . pls help i need to update my old apps from itunes
i just change country account id from us to thailand .now i can't update apps that i use to buy when my account in us from itunes .all of apps(us id) don't show up in Purchased also . pls help i need to update my old apps from itunes
-
Reinstalled dreamwever cc and now my extensions don't show up. Any Ideas? PS when I open extension manager they are in there
Hi The solution was I had to reinstall all the extensions, then they showed up. Thanks
Sincerely
Dennis Handa
DHManagement and PR
www.agentezsite.com
www.businessezsite.com
www.flarren.com
www.keysluxuryliving.com
321-956-4003
2601 Reed Avenue
Melbourne Fl 32901
Maybe you are looking for
-
ITunes 7 wont recognize iPod(s) any more
Hi there ! Since upgrading to iTunes 7 I've found that iTunes fails to recognize my iPods 90% of the time, and the 10% it does find it, it will disconnect after a few seconds and/or report an error with it. Generally this then causes the iPod to lock
-
I downloaded the update for 3.6.4, went to install it and got a message that I am running Fire Fox so I closed it and let it install. When I restart Fire Fox I look in the help section at the top and it shows Apply Download Update now. It will not up
-
How to import iTunes XML library into MS Acess database?
I have exported my iTunes data to a library XML file. When I try to import these data to a MS Access database (without the sound files of course) I only get strange and stupid table entries. I would like to use MS Access to create more flexible repor
-
Hi Experts, WIll any one pleasee xplain what is accounts payable / What is the full life cycle of accounts payable.Would be thankful if u cud explain me the flow BR, KK
-
my ipod touch isnt working with itunes so i can put new music on it and it keep saying that my ipod is a camera device so what should i do?