Idea of change frame or display ? howto create new view / different page?

hi, good day,
i have create a tabpanel , tabpanel contains 4panel ,
mainpanel (main panel which hold searchpanel n tree panel n btnPanel) , searchpanel (left) and tree panel (right)
and say i have 3 buttons, buttons are locate in btnpanel
click on button A - it give me current view with my existing mainpanel, searchpanel, n tree panel
click on button B - it give me another view with different panels
and also button C for other view ,
in short , i want something like web , click on button A - give me page A , button b will show page B ..
only different is , button panel doesn't need change
i'm not sure how to do it in swing ? can someone please contribute some ideas ...any example will appreciated ...and thank you very much for guidance :)

Use a [url http://java.sun.com/docs/books/tutorial/uiswing/layout/visual.html]Card Layout.

Similar Messages

Create Attachment View Link Pages In JDeveloper

I am trying to create Attachment View Link Pages in JDeveloper and for some reason the wizard is not opening. I get the following error
java.lang.NullPointerException
     at oracle.apps.fnd.applcore.dt.attachments.wizard.viewLink.AttachmentsViewLinkWizard.getConnectString(AttachmentsViewLinkWizard.java:492)
     at oracle.apps.fnd.applcore.dt.attachments.wizard.viewLink.AttachmentsViewLinkWizard.createApplicationModule(AttachmentsViewLinkWizard.java:466)
     at oracle.apps.fnd.applcore.dt.attachments.wizard.viewLink.AttachmentsViewLinkWizard.<init>(AttachmentsViewLinkWizard.java:117)
     at oracle.apps.fnd.applcore.dt.attachments.wizard.viewLink.AttachmentsViewLinkAddin.invoke(AttachmentsViewLinkAddin.java:67)
     at oracle.ide.wizard.WizardManager.invokeWizard(WizardManager.java:372)
     at oracle.ide.wizard.WizardManager$1.run(WizardManager.java:420)
     at oracle.ide.util.IdeUtil$3.run(IdeUtil.java:1089)
     at oracle.javatools.util.SwingUtils.invokeAfterRepaint(SwingUtils.java:509)
     at oracle.ide.util.IdeUtil.invokeAfterRepaint(IdeUtil.java:1102)
     at oracle.ide.wizard.WizardManager$2.run(WizardManager.java:428)
     at oracle.ide.util.IdeUtil$3.run(IdeUtil.java:1089)
     at oracle.javatools.util.SwingUtils.invokeAfterRepaint(SwingUtils.java:509)
     at oracle.ide.util.IdeUtil.invokeAfterRepaint(IdeUtil.java:1102)
     at oracle.ide.wizard.WizardManager.invokeSecondaryWizard(WizardManager.java:424)
     at oracle.ide.gallery.ObjectGallery.invokeWizard(ObjectGallery.java:383)
     at oracle.ide.gallery.ObjectGallery.runDialog(ObjectGallery.java:204)
     at oracle.ide.gallery.ObjectGallery.runDialog(ObjectGallery.java:124)
     at oracle.ide.gallery.ObjectGalleryAddin._invokeGallery(ObjectGalleryAddin.java:405)
     at oracle.ide.gallery.ObjectGalleryAddin.handleEvent(ObjectGalleryAddin.java:208)
     at oracle.ide.controller.IdeAction.performAction(IdeAction.java:529)
     at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:884)
     at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:501)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:273)
     at java.awt.Component.processMouseEvent(Component.java:6289)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6054)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4652)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4482)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4482)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
     at java.awt.EventQueue.access$000(EventQueue.java:85)
     at java.awt.EventQueue$1.run(EventQueue.java:603)
     at java.awt.EventQueue$1.run(EventQueue.java:601)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
     at java.awt.EventQueue$2.run(EventQueue.java:617)
     at java.awt.EventQueue$2.run(EventQueue.java:615)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Do i have to include any jar files in JDeveloper ? i aint have any idea on what wrong.

Hi
this is a public Oracle JDeveloper and ADF forum. If you have a problem with your Applications environment, please post the question to the related Applications forum here on OTN. We don't have access to appl core on this forum and can't get you out of your problem for this reason
Frank

How to create new view without interlinking with gantt chart or resource views

ok clear
one another question
In msp how to create new view without interlinking with gantt chart or resource views

Hi Shiv PMC--
I splitted your question above in another thread in order not to have a huge thread with many topics in it.
That being said, I'm not sure to understand. A view is just a manner to display MS Project data with columns. A view can have a table with column (left part) associated with a Gantt chart. It can also just contain a table with no Gantt chart (like the task
table) or a table with a timephased grid (resource and task usage).
Please give us more information, maybe with a concrete example so we can help you.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How to get the search option when we are creating new view

Hi,
How to get the search functionality when we are creating new view.
Ex:- if we see the standard component BT112S_SC. Under this
AdvancedSP is the view,
same kind of view if i want to create new view with same bol entity in my new component. I am unable to get that search functionality.
for search functionality,,i think view should inherit the super class CL_BTSRV_ADVS_CNTRL, but in my new view controller class, i am unable to find this class.
Can anybody give me some inputs on this.
Thanks,
neelam

In case you are still not able to proceed please refer the following blog.
http://blogs.moovar.com/sap/sap-crm-web-ic-create-a-new-search-view-and-result-view
Regards,
Harshit

Have updated email add now passwords don't work and old email is still displayed so created new apple ID and password ,now app store still using old email /password .wat to do now

Have updated apple I D and password
Now appstores still using old apple Id and password
Cannot update or download apps
Created new apple I d and password and now still iTunes using old id and old password doesn't work
Bbaaaaaaaahhhhhhh

Hi Mofomon,
If you want to use the new/updated AppleID and password, you need to sign out of the App Store, sign out of iTunes, etc. and then sign back on with the new ID and password.
To sign out of the App Store on your iPad, go to Settings>iTunes & App Store, then click on your old AppleID, click on View Account, and sign in with your old password that goes with that ID. Then click on Sign Out. Once you have the old ID signed out, you can sign back on with the new ID and Password.
New purchases will be done with that ID, but if you actually set up a totally separate brand new ID from your old one (as opposed to simply changing it) then any past purchases will still be linked to that old ID, and will require the old password for updating.
If you simply changed your existing AppleID, then the new password will be what is needed for updating.
Cheers,
GB

How to create new view in WebUI for Product

Hello,
We want to create a new view (Z) based on the fields of the BOL object and show it in the WebUI. Is there any step by step explanation how to do it?
Thanks in advance,
Sergey Kozyrev

Hi Sijo,
The following would be the steps to integrate a z component to a std component:
1. Create the view that you would like to integrate with the standard component in a separate z component and design its configuration
2. Add the view in the Component Interface of runtime repository editor. Executing the z component directly must display the view without any errors
3. In the standard component, add the z component in Component Usage of runtime repository editor
4. In the standard component, add the custom component view in Viewsets->Viewarea->View (overview page view) of runtime repository editor
5. Now the view would be there in the available views of the overview page. Move it to the list of visible view on the right side
6. Execute the std component through Web UI and the view should appear
7. Make sure the Web UI uses the same role config key as that of the overview page in which you have added the view

Problem with creating new view and binding it wht existing ViewSet/viewArea

Hi All,
I created a new view.
Now I am trying to dynamically change the veiw in ViewArea : product of ViewSet : BupaMainViewSet .
I added my new view in the views for viewarea : "product".
Now I wanted to get this new view based on some button clicks on view BupaSearchB2B.
If search Account button is clicked my new View has to appeared. Othewise the standard view in the Product view area shud appear.
I dont know how to do.
Your response will be highly appreciated with your reward points.
kindly assist me on this.
Thanks,
SR.

Hi,
You can find detailed information at the following link:
<a href="https://portal.wdf.sap.corphttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/go/km/docs/corporate_portal/ws%20service%20%26%20support/product%20support/workspace_public/product%20support%20knowledge%20base/crm/crm-ic/crm-ic/icwc_cbk_crm50_290306.pdf">https://portal.wdf.sap.corphttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/go/km/docs/corporate_portal/ws%20service%20%26%20support/product%20support/workspace_public/product%20support%20knowledge%20base/crm/crm-ic/crm-ic/icwc_cbk_crm50_290306.pdf</a>
Please reward points if helpful
Best regards
Reyes

Problem in Spras field for join condition in creating new views

Hi,
I want to create a new view for three tables t1 t2 and t3 say.....i want to join this three tables like
table    field         table   field
t1      mandt     =   t2     mandt.
t1      vkbur      =   t2      vkbur.
And other condition is t2-spras = 'E' now.... how should i give this condition in the join condition as u have to give the other table name and the field name on the other side too..... table t1 has no filed in its table for the field spras.........so i just have to give t2-spras as 'E'. But this is throwing error...Please help

Hi,
1.u can specify the first thing i.e. t1 mandt = t2 mandt and t1 vkbur = t2 vkbur in the <b>join conditions</b> even if there is no relation ship b/w t1 and t2 on vkbur.simply u specify the join condition manually.
2.for the second thing....wat u did is rite.......
I think it will work.
Thanks ,
Jyothi.D
want to create a new view for three tables t1 t2 and t3 say.....i want to join this three tables like
table field table field
t1 mandt = t2 mandt.
t1 vkbur = t2 vkbur.
And other condition is t2-spras = 'E' now.... how should i give this condition in the join condition as u have to give the other table name and the field name on the other side too..... table t1 has no filed in its table for the field spras.........so i just have to give t2-spras as 'E'. But this is throwing error...Please help

Tools Options changed from drop-down box to new tab full page. Why?

Hello,
Have Windows 7, Firefox Nightly 32.0a1 (2014-05-18) the latest update was a couple of hours ago. Since then, when I go to Tools>Options, instead of the Options menu opening in a drop-down window with General, Tabs, Content, Applications, Privacy, Security, Sync and Advanced at the top, it now opens as a new tab (full page) and of the eight functions, the "Tabs" is missing, the others are down the left side of the page.
Also since this update, I am having problems with two forums, (both hosted by ProBoards) - the icons for links, video. image etc are missing, the "Like" button doesn't work, I cannot preview my posts, the clickable button/box to return to forum is missing. Others on the forum who use Firefox aren't having problems. I'm thinking it is the update causing these problems because they weren't appearing before.
Thank you.

That is the new "Options" display, added in today's Nightly when you go to open Options. '''"Tabs"''' preferences are on the "General" panel.

Any way to change back button title without creating new button?

Hi,
Is there any way to change the back button title on a navigation controller without having to create a whole new button and action to go with it?
Thanks
Ray

Yes, you don't need to create a new a new action mechanism etc.
One way to change the back button text on a the navbar of a view is to create a new UIBarButtonItem (with nil tagget and nil action )
Then set self.navigationItem.backBarButtonItem of the parent view controller to the new button
Note that you're setting the backbarButtonItem of the parent view controller (and not the view controller on which this bar button will be displayed). This automatically plugs in the default target, action etc. So you don't need to implement it

Is it possible to change the default URL when creating new hyperlinks?

I'm currently working to take a 128 page catalog that was created in InDesign for print and turn it into a interactive PDF to post on our companies website. The catalog contains thousands of part numbers and I'd like to link each one to its corresponding stock status page on our website that gives current availability and pricing for any particular customer.
So say I'm dealing with part number "XXXX". When I go to add the hyperlink the default web address it spits out is " http://XXXX ". Instead of that, would it be possible to change the default to " http://forums.adobe.com/discussion/XXXX/1 ". Obviously I just used this website as an example, but it would save so much time if I could avoid having to type the exact same URL every time.
Or maybe is there a quicker way to do this other than what I am currently trying?
Thanks

I've found some external software applications that will do it, so that leads me to believe its not possible within ID CC.

LR 1.3 cannot save changes to export preset - only create new presets

So, in LR 1.2, I could change some parameters in a preset (export presets) and then save the changed preset. But the upgraded LR 1.3 export form does not seem to have a "save" option. I can create a new preset, I can remove a preset, but I cannot save a change to an already existing preset. I can get around it by ...
. add, creating a new (ie. temporary) name saving my changes
. open the original preset
. remove (the old preset)
. open the new preset (with the temp name)
. add using the old preset name that I like to use
. open the temporary (ie. new) preset
. remove (to delete the temporary preset)
- yuck! What an ugly work around :(
Can we please have our save option back again?

It's still there. Right-click the preset you want to update and select that option.

Changing default code in HTML "Create New" page for CS3

When I open dreamweaver and go to File>New>blank Page>HTML, the code that displays when the page is opened isn't what I want. For instance, I'd like to change the XHTML DOCTYPE to 1.0 strict (from transitional).
Is there a way I can get in to the backend of this program and change that code so I don't have to do it manually every time I open a blank html page in DW? Or can I make my own, and then make that my default html page code?
Thanks,
Luke

When you Choose FILE>New, you will see a Preferences button at the bottom of the interface. Click on that and you can choose how to diplay the 'new page' whenever you open up a new document.

Displaying 2 worksets having 2 different pages in Portal

Hi All,
I have created 2 pages named page 1 and page 2
and 2 worksets named workset1 and workset2
page1 is assigned to workset1 and
page2 is assigned to workset2
and both the worksets are assigned to a role named Role1
\Now the role is assigned to a User
but when we logged in with that user we are not able to see both the Worksets
its showing name of both the worksets in the top level navigation pane but it displays only one workset which is assigned first to role.
like if we are logging into the portal we can see page1 only as workset1 is assigned first to role but there is a link as tabbed pane for workset2 and when we clicked workset2 nothing changes only page1 is displayed.
please help me out in this
thanks in advance
rgrds...
Gaurav

hi maheshwaran
Its right that workset2 will take through page2 but the problem is we are able not able to go to workset2
links are there for both in the portal navegation area as ;
workset1 ! workset2
page1
but when we clicked on workset2 then it doesnot change it shows as it is
workset1 ! workset2<clicked>
page2
pls check it out

MM17 creating new views

Recently we ran transaction MM17 in order to update cross-plant material statuses for about 180 materials. The transaction executed without problem but upon reviewing the changes in MM03 it was discovered that new tabs, specifically Sales tabs, were created after the transaction was finished. We did not previously have sales tabs associated with these materials, and do not want them with these materials now. Has anybody had this issue or something similar?

Recently we ran transaction MM17 in order to update cross-plant material statuses for about 180 materials. The transaction executed without problem but upon reviewing the changes in MM03 it was discovered that new tabs, specifically Sales tabs, were created after the transaction was finished. We did not previously have sales tabs associated with these materials, and do not want them with these materials now. Has anybody had this issue or something similar?

Idea of change frame or display ? howto create new view / different page?

Similar Messages

Maybe you are looking for