Identify the planning layout used to enter data.

Hi,
I am using BI - IP Planning solution. I have a planning solution with 5 different templates. I have a Infoobject ZSOURCE in my planning cube. I would like to update this field based on the planning layout I used to enter the data.
I cannot include this field in the planning query or Filter because the actuals do not have this field. I am planning to use Characteristic Derivations to update this field. Does any have any idea on how to access input query parameters during the Charateristic Derivation Exit class?
Or, Is there a better way to achieve this functionality ?
Thanks
Murthy

Hi Murthy,
whether a field is filled or not should only depend on the data model, not on a query. This is why characteristic relationships are assigned to real-time InfoCubes, not aggregation levels or queries.
So my questions is, what is the 'real' criterion to fill ZSOURCE (in some queries and in others not). As I understand, ZSOURCE is not in the aggregation levels so it can be derived based on some criterion. But why is this criterion the used query?
By design of characteristic relationships you don't get this information in an exit class; though you might 'abuse' a variable exit implementation to read the query name from I_S_RKB1D-COMPID, store in ABAP memory and read the value in your exit implementation. This may work in your case but is not very nice.
Regards,
Gregor

Similar Messages

Why is the iPhone 5 using so much data I have read a lot of complaints and I have went over on my plan and never have?

Why is the iPhone 5 using so much data I have read a lot of complaints and I have went over on my plan and never have?
I have even turned off LTE. Cut off my cellular data off of apps. Still uses data I switched back to my iPhone 4 cause I had used my
Data in 2 weeks!

I have the same problem on my 4S 64G: I updated to 7.1.1 and burned through my cellular data allowance without running anything that ought to be using it. I incurred an overage charge on Thursday, my new billing cycle started on Friday, and I immediately had used 3/4 of my allowance for the new cycle. I typically do not use my allowance in an entire month so burning through it in a day or two twice in one week is very much not right.
Possibly unrelated or not: last night I was out, did NOT use any apps that should use cellular data, and came home and my phone refused to connect to my home wifi despite turning this and that on and off. I burned cellular allowance while wifi was available.
It seems like someting on my phone, whether an app or the iOS itself, is using cellular data even while my phone is not in use. All I could do is turn off Cellular Data in Settings but that very much diminishes the usefulness of a phone that has served me well -- without data overages! -- for several years.
Please fix this, Apple!

Display multiple combination of values all at a time in the planning layout

Hi,
we are on BW 3.0B and SEM 3.1B. We've 2 characteristics "COUNTRY" and "CONTINENT" in planning level and package.
in the planning layout, we had placed "CONTINENT" in the lead columns and "COUNTRY" in the header are and COUNTRY is hidden.
Now, when we execute the layout for CONTINENT values "EUROPE and AFRICA" and COUNTRY values "GERMANY and SAFRICA".
output of the layout is as follows for country GERMANY
CONTINENT Value
EUROPE 123
EUROPE 234
EUROPE 456
as COUNTRY is in header, we need to scroll down (use down and upper arrows) to get values for next country SAFRICA combination of CONTINENT "AFRICA" in the layout as follows
CONTINENT value
AFRICA 342
AFRICA 267
AFRICA 768
How do we get the layout to display both AFRICA and EUROPE in the same page without a need to use arrows as follows
CONTINENT Value
EUROPE 123
EUROPE 234
EUROPE 456
AFRICA 342
AFRICA 267
AFRICA 768
the only solution, i can think of is move COUNTRY from header to lead columns. But, we have a need to keep COUNTRY in the header area. I doubt if we can achieve this, but i have some hope as COUNTRY is a hidden field in the header area which we can take advantage of.
any help is greatly appreciated.
thanks

Hi Marc,
yes. there u go. my name is hari.
thanks for your reply. sorry to confuse you. earlier, I just took a random example. Now, I am giving my problem in a more realistic way.
we have cube data as follows
Code Area Group Price
ABCD EUR 111 20USD
ABCD USA 222 30USD
Code, Area, Group are not attributes of each other.
we have a planning folder with variables for "Code" and "Area" with an input layout that has "Code and Group" in the header and "Area" in the lead columns.
after we execute folder, if we enter values "ABCD" for variable "Code" and variable range "EUR to USA" for "Area", current layout is as follows
======
Header
======
Code : ABCD
Group: 111 (not visible as Group is hidden in the header area of layout)
======
Layout
======
Area Price
EUR 20USD
for next combination, if we use down arrow to scroll down to Group 222, layout is as follows
======
Header
======
Code : ABCD
Group: 222 (not visible as Group is hidden in the header area of layout)
======
Layout
======
Area Price
USA 30USD
we are interested to see all "areas" for Code ABCD irrespective of "Group" as follows.
if we enter "ABCD" for Code and "EUR to USA" for "Area" variables, we need to have layout
======
Header
======
Code : ABCD
======
Layout
======
Area Price
EUR 20USD
USA 30USD
this might also work out for us.
======
Header
======
Code : ABCD
======
Layout
======
Area Price Group
EUR 20USD 111
USA 30USD 222
How do i achive this? we have a need to keep Group in the header area of the layout to get data from other source.
hope it is clear.
Message was edited by: hari143

Error When generating the plan layout

Dear All,
When i try to generate the file description for COPA planning through KP34ER, i get the following error..
I have checked all four points that they have mentioned. Any idea why this coud be?
No data has been entered yet.
Message no. KG845
Diagnosis
The planning layout you are using (COPAGI) only contains selection criteria for which no data has yet been entered. As a result, the system cannot display any plan data.
In this layout it is not possible to add characteristic values. This could be due to the following:
1. Manual planning is not allowed for the specified record type. Only record types A, F, G, E, and your user-defined record types can be planned manually.
2. The planning layout was only defined to contain actual data. The plan/actual indicator "1" is nowhere specified.
3. The selected plan version cannot be planned.
4. The lead column was defined so that only the texts of the characteristic values are displayed. As a result, no new characteristic values can be added in planning.
Procedure
Proceed as follows, depending on what the cause was:
1. Use a record type that can be planned manually.
2. None
3. Choose another plan version that can be planned.
4. Change the planning layout so that the key of the characteristic values is displayed in the lead column.
Thank you
Gayani

Hi,
Another possible reason could be, that in the general data selection of the layout is used the characteristic which is not restricted in the plannig package to the single value:
Example:
Let say the char. Country is used in the general data selection and is not restricted in the pl. package. Since the value for the
general data selection characteristic is not possible to enter in the layout, it is not possible to enter any data, because the user
could not enter for Country and the system doesn't know for what Country the planning is done. If you restrict the Country in the pl. package to single value (e.g. JP) then it will work, since the system knows now, that the data which will be entered belongs to the Country = JP.
So please make sure, that all general data characteristics are restricted to the single value in the planning package. Then it will work.
When we specify single value the planlayout can be displayed with "0" because of there is in this case already created (together with values of other characteristics) a concrete profitability segment that exists certainly. That means system can find and display this profitability segment.
But when we put interval 0000 - ZZZZ for a characteristic system doesn't know which values from this interval are the valid values that are able to be displayed for planning. For example the value 1010 can exist but 2020 does not exist and it would make no sence to offer these invalid values for display of planning data.
In general, message KG845 in case of selection defined by interval is raised also due performance reasons. Selection
defined by interval(s) could lead to big number of possible combinations, which should be displayed regardless of fact that no data are already posted in database.
The idea is following- if there is selection defined by single values, then we don't care about performance and we display data (empty) values as it's fast(regardless of fact that no data are posted in database). In case of selection by interval, performance is an issue because we have to display all combinations of data, which can be generated. This could lead to thousands of possible combinations and long system response. This is not intended and it makes no real sense. Basic idea
here is that we use different approach in case that selection is defined by interval and different approach, when selection is defined by single value.
I hope this helps.
regards
Waman

Free Chars int the Planning Layout

Hello IP gurus,
Is it advisable to put too many free characteristics in the planning layout and in the real time cube . My user is requesting too many chars in the layout and I am suggesting to have it in the report/reporting cube and not in the layout/real time cube. All are actual and nothing to do with planning chars/key figures. Can you please advice what is the best design. Thanks in advance for your help guys.
Senthil

Hi,
You can use free characteristic ,if you are going to plan at that granularity.For input ready query used in planning ,characteristics
part of aggregation level has to be part of row or column.So check at what granularity you are going to plan for data,then decide design.
Regards,
Indu

Could you help me regarding the planning layout in excel please ???

Dear All,
Could you kindly help me to solve my case please .. ? :).
I tried to change the template of excel planning layout using this program: UPP_MASTER_CHECKIN.
I tried to modify the template by inserting some logo picture there.
I put the picture in the left-top corner,
but after i run the program, the logo picture position cover/above the planning data.
My questions is:
1. Could we setup in what row we're going to start the planning data ?? So it the planning data will not be covered by Logo ..
e.g.
Before:
Planning data is written in row 1 and column 1.
Could i modify the planning data to be written in row 6 and column 1.
Regards,
Niel..

Hi Neil,
you must insert row between logo and data region. Furthermore you must set image properties to not change its dimension.
Best Regards

Pls. identify some seeded views used as Existing Data Source in DBI Reports

Hi!
Can someone please identify some seeded views used as Existing Data Source in DBI Reports. I only need some idea how they are defined.
Thanks.

Jon632 wrote:
Hi!
Can someone please identify some seeded views used as Existing Data Source in DBI Reports. I only need some idea how they are defined.
Thanks.
You can find the list of seeded views in eTRM website -- http://etrm.oracle.com/pls/etrm
Are there seeded tables/views of DBI dimension objects in Oracle EBS?
Thanks,
Hussein

Key figure flag in the planning layout

Hi,
Can anyone explain the importance of the key figure flag in the planning layout?
Regds
Pavan.

Hi Arun and Zegion,
Thank you for your responses.
Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
Regards,
S.P

How do we identify the standard texts used in a sap script?

Hi,
Is there any way that i can identify the standard texts used in SAP scripts?
Not manually going to each window in the script and checking.
Will there be any table where I can look ?
Thanks,
krishna.

Hi,
GO to the forminfo of the sapscript in SE71..and then search for INCLUDE
after displaying the form...utilities->form info..
hope this works..
Thanks
Naren

I bought a movie, the download completes, but then starts back from the beginning again using up more data, help,

I Purchased the hobbit desolation of smaug, the download completes, but then starts from the beginning again, using up more data.

Okay, you need to contact support definitely about what's going on. Here is a form that will send an e-mail into support for you:
http://www.apple.com/emea/support/itunes/contact.html
As far as the prices, the difference is likely the laptop version is the SD version and the iPad one is available in HD. That's the only reason you'll see a price difference. It has nothing to do with the device with movies/movie rentals. Apps yes, these no.

How do i stop my iphone from connecting to the internet and using up my data allowance

Hi do i stop my iphone 3gs from connecting to the internet and using up my data allowance unless i want to.

See Recover your iTunes library from your iPod or iOS device for the first half of the puzzle, the second depends on the other phone.
tt2

How to use User entered dates in intreval

Hi,
User will enter date range in variable
As per my requirment i want to use no of days between those 2 user entered dates in my calculaction
How can i achieve this at report level.
Thanks

Hi
Create a variable with intreval.
There is a function module which calculates the no of days between the days
Go to SE38 and ZXRSRU01 Program
Write the Code like this (Not exact code) you can modify
WHEN "ZZZZZ"(Before that create a formula variable to get the number of days between the days and use the tech name of the formula variable here)
read ..the lower limit and the upper limit of the caldaz variable
FROMDATE = L_S_RANGE-low
TODATE = L_S_RANGE-HIGH
Then call the function module
Search for the function module by using days in SE37
Then pass the from and to Date to the function module it will retun the number of days
update that to table e_T_Range
You can proceed with this
Regards
M.A

How to display clob/blob in the web layout using Reports9i

Hi,
I've created a report that selects both a clob and blob datatype in the query. However, when I run the report using the 'Run Web Layout' tool no data is displayed for these columns. Does the <rw:field> tag support such datatypes ?.
Regards,
Chris

Hi Chris,
Reports9i supports both BLOB and CLOB in both paper as well as web layout. Pl make sure that in the column properties that you want to display, you have selected the "File Format" correctly (to do this, go to data model > column > property inspector > file format). Eg, you can select "text", "image" etc depending on what you have stored in the column. Also, when you want to display an image in the web layout, you will have to write containsHtml="yes" inside your <re:field> tag.
Navneet.

Identifying the target system using FM extraction in a Generic Datasource

Hi all,
We are using a Generic datasource using FM for extraction from R/3 system to BW system. This Function module picks data from a Z table! After each successful delta extraction from the table, a flag field is set to identify whether the data is pulled or not.
We are about to use BO data services which is connected to the R/3 system to fetch data. For capturing delta records after the BW run has happened, the table can be added a new flag field to pull delta for Data services.
Is there any way to identify which target system's extraction is running particularly in the function module (for e.g., if BW extraction is triggered or BODS extraction is triggered) so as to set the respective target flag in the Z table?
Regards,
vivek

Leandro,
The calling program of your FM should have a local variable I_RLOGSYS which is populated with the BW server ID.
If you don't know how to access a variable in a program that is in call stack using field symbols, search SDN.
I haven't tested this, so you may have to explore a little.
Good luck.

I have two separate calendars on iCloud (to share with two different groups), but I click on the second and try to enter data, it defaults to the first one I set up. How do I fix this?

I have one iCloud account. I set up two separate calendars on iCloud to share with two separate groups. But when I click on the second calendar and try to enter data, it defaults to the first/other calendar (wrong group to share with). How do I fix this?

Was this ever resolved?
Recently I set up a share for one calendar with another Apple user, through my iCloud. Now I find that the shared calendar, which has maybe 50 entries a week because it is for keeping track of community center activities and printing out PDFs, appears in my personal Calendar --- unless I turnoff the sharing.
Is this generally true? I cannot find any clarity on this on Apple Support.
If so, I plan to stop the assistance to the other Apple user. I will stop sharing the community center calendar that I set up on my computer and ask her to set up such a calendar on her own computer anew. The sharing of Calendars does not work well. It seems the shared calendar takes over as the only calendar one can see on one's own computer, replacing other calendars set up without sharing. I can only "see" the other calendars by turning off the sharing on the shared calendar. This is inconvenient. Basically shared Calendars take over!

Identify the planning layout used to enter data.

Similar Messages

Maybe you are looking for