Idle timeouts in 10g

How can I enable idle timeouts for a consumer group in Oracle 10g?
Also, are there any dos and dont's on when this enabling should be done / not done.
Thanks

Oracle has several ways to disconnect idle sessions, both from within SQL*Plus via resources profiles (connect_time, idle_time), and with the SQL*net expire time parameter.
You can use profiles to set the connect time and idle time with "alter profile" statements:
alter profile <profile_name> limit
connect_time 180000
sessions_per_user 2
ldle_time 100;
Using sqlnet.expire_time
The sqlnet.expire_time parameter is used to set a time interval, in minutes, to determine how often a probe should be sent verifying that client/server connections are active. If you need to ensure that connections are not left open indefinitely (or up to the time set by operating system-specific parameters), you should set a value that is greater than 0. This protects the system from connections left open due to an abnormal client termination.

Similar Messages

  • How to Increase the 15 Minute Idle Timeout?

    I saw some similar posts to increasing the EM timeout, but they didn't seem to relate to the idle timeout period.
    I need to increase the idle timeout from 15 minutes to something more like 30 minutes. A lot of times, I'll be editing a package with 10g on the web and doing some research online in between edits, only to come back and be timed out for no activity within 15 minutes. That's just too short. Can I increase the time? Where can I find that setting?
    Thanks!

    Change or Add the parameter in emoms.properties
    For DBconsole
    $ORACLE_HOME/servername.domain_SID/sysman/config/emoms.properties
    For Grid Control
    $ORACLE_HOME/sysman/config/emoms.properties
    For example, you can change this time to 60 minutes (1 hours) by adding the following lines to the above file.
    oracle.sysman.eml.maxInactiveTime=60

  • Idle Timeout & Session Timeout in Wireless LAN Controller

    Hello Team;
                   I am confused with these two values and their working.
    1. Idle Timeout :
        Case 1 : When the client move out of the wireless covergae area or shutdoiwn his laptop, controller will wait for the idle timeout to expire and then the AP sends the disassocciation frames to the client, and if the AP is not getting any acknowledgement , the client entry is deleted from the WLC
       Case 2 : In this case the clients manually disconnect from the SSID. Thatmeans the client is initiating the disassociation request to AP and the controller. In this case since the client is sending the disconnect notification does the controller should wait for the idle timeout to expire or once it receives the disassociation message from the client, it will immediately remove the entry from the controller regardless of the idle timeout value.
    Please confirm
    2. Session Timeout :
             Could you please let me know the difference between these two values. One differenec i know is that idle timeout is globally and the session timeout is specific to the SSID. Other than this is there any functionality difference between these two?
    Thanks & Regards
    Sreejith R

    Session timeout is a value that forces a re-auth when the timer expires. This value starts copying down when the client is authenticated. Idle timer is also a hard timer and it removes the client from the WLC after this timer expires. So if a user powers down his or he laptop or a device goes to sleep and doesn't respond to the AP, this timer starts counting down. When the value expires, then the next time that client associates, he or she will have to perform a full authentication. This is however if you not using open encryption and nothing else.
    You will be able to see the values decrement inf when you look at the client status on the WLC. In the monitor tab and clients.
    Sent from Cisco Technical Support iPhone App

  • Apple TV and Time Capsule 802.11n -- idle timeout and group key stuff...

    I've been having some wireless issues since moving to a Time Capsule to provide my 802.11n service.
    I have my time capsule setup as an 802.11n only router, on a 5 ghz band only, with WPA2 security (AES-CCMP.) My reception is great -- but I've noticed in the logs that there's an idle disconnect that seems to occur about every 10 minutes.
    What seems to be happening is that when the idle disconnect occurs, the AppleTV renews its connection. The problem, at least 90% of the time, is that if the "group key timeout" value in the Airport Admin Utility has been passed AND the idle timeout occurs, the unit appears to be unable to connect to the network unless you reboot OR reenter the network password.
    The Time Capsule is setup strictly from a networking standpoint as a wireless bridge -- I have an existing network DHCP server, and during the disconnects, a DHCP renewal is not occurring.
    Another observation when this issue is occurring: on the "Network" settings page, instead of selecting wireless network, you can select TCP/IP, and select "DHCP" and the unit will state that it has successfully connected to the network, and states the network name. The Time Capsule though doesn't show an active client; I have to assume this is some sort of bug.
    Since the unit works fine after a reboot, I have to assume something isn't quite right with the way it is attempting to reconnect to grab an update group key after an idle timeout occurs.
    I'd like to test this further, but I can't find anyway in the Airport Admin Utility to change the idle timeout value. There's a place to enter the group key timeout, but not the idle timeout.
    Has anyone else noticed this behavior and found a way around it?
    Message was edited by: Matt Domenici
    Message was edited by: Matt Domenici

    Just one more follow-up post to say that I continue to have the same problem. (Just picked up my TC and aTV on Tuesday and didn't get a chance to do too much with it until this weekend.
    I have the TC running in bridge mode to my FIOS Actiontec router. The Actiontec does DHCP for the home network (has to because of paculiarities with FIOS on MOCA with a cable TV set-top box) and runs an 802.11 g network for all my non-N hardware (iPhone, older computers, etc.). The TC runs 5 GHz N-only, and the aTV connects to that. I set things up this way because I wanted to keep the aTV and my N-capable computers on a dedicated wireless channel for speed.
    Alas, I'm afraid I'm going to have to use the aTV on the G network, or perhaps ethernet, until this problem gets sorted out.

  • WLAN User Idle Timeout and WPA2-PSK authentication

    Hi,
    There is a WLAN for Guest users with Session Timeout of 65535 sec and User Idle Timeout of 28800 sec. The WLAN uses PSK as Layer-2 authentication and Web Auth as Layer-3 authentication. Authentication source is locally created users on the controllers (LocalEAP) - can be RADIUS through ISE as well. 
    (Cisco Controller) show>sysinfo
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.6.130.0
    RTOS Version..................................... 7.6.130.0
    Bootloader Version............................... 7.6.130.0
    Emergency Image Version.......................... 7.6.130.0
    Build Type....................................... DATA + WPS
    System Name...................................... vwlc-1
    System Location.................................. Matrix
    System Contact................................... IT HelpDesk Matrix
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1631
    IP Address....................................... 10.10.10.50
    System Up Time................................... 6 days 17 hrs 30 mins 26 secs
    System Timezone Location......................... (GMT+10:00) Sydney, Melbourne, Canberra
    System Stats Realtime Interval................... 5
    System Stats Normal Interval..................... 180
    Configured Country............................... AU - Australia
    --More-- or (q)uit
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 2
    Number of Active Clients......................... 0
    Burned-in MAC Address............................ 00:0C:29:74:15:2F
    Maximum number of APs supported.................. 200
    (Cisco Controller) show> wlan 2
    WLAN Identifier.................................. 2
    Profile Name..................................... Matrix-LocalEAP
    Network Name (SSID).............................. Matrix-LocalEAP
    Status........................................... Enabled
    MAC Filtering.................................... Disabled
    Broadcast SSID................................... Enabled
    AAA Policy Override.............................. Disabled
    Network Admission Control
    Client Profiling Status
    Radius Profiling ............................ Disabled
    DHCP ....................................... Disabled
    HTTP ....................................... Disabled
    Local Profiling ............................. Disabled
    DHCP ....................................... Disabled
    HTTP ....................................... Disabled
    Radius-NAC State............................... Disabled
    SNMP-NAC State................................. Disabled
    Quarantine VLAN................................ 0
    Maximum number of Associated Clients............. 0
    Maximum number of Clients per AP Radio........... 200
    Number of Active Clients......................... 0
    Exclusionlist Timeout............................ 60 seconds
    Session Timeout.................................. 65535 seconds
    User Idle Timeout................................ 28800 seconds
    Sleep Client..................................... disable
    Sleep Client Timeout............................. 12 hours
    User Idle Threshold.............................. 0 Bytes
    NAS-identifier................................... vwlc-1
    CHD per WLAN..................................... Enabled
    Webauth DHCP exclusion........................... Disabled
    Interface........................................ management
    Multicast Interface.............................. Not Configured
    WLAN IPv4 ACL.................................... unconfigured
    WLAN IPv6 ACL.................................... unconfigured
    WLAN Layer2 ACL.................................. unconfigured
    mDNS Status...................................... Disabled
    mDNS Profile Name................................ unconfigured
    DHCP Server...................................... Default
    DHCP Address Assignment Required................. Enabled
    Static IP client tunneling....................... Disabled
    Quality of Service............................... Silver
    Per-SSID Rate Limits............................. Upstream Downstream
    Average Data Rate................................ 0 0
    Average Realtime Data Rate....................... 0 0
    Burst Data Rate.................................. 0 0
    Burst Realtime Data Rate......................... 0 0
    Per-Client Rate Limits........................... Upstream Downstream
    Average Data Rate................................ 0 0
    Average Realtime Data Rate....................... 0 0
    Burst Data Rate.................................. 0 0
    Burst Realtime Data Rate......................... 0 0
    Scan Defer Priority.............................. 4,5,6
    Scan Defer Time.................................. 100 milliseconds
    WMM.............................................. Allowed
    WMM UAPSD Compliant Client Support............... Disabled
    Media Stream Multicast-direct.................... Disabled
    CCX - AironetIe Support.......................... Enabled
    CCX - Gratuitous ProbeResponse (GPR)............. Disabled
    CCX - Diagnostics Channel Capability............. Disabled
    Dot11-Phone Mode (7920).......................... Disabled
    Wired Protocol................................... 802.1P (Tag=2)
    Passive Client Feature........................... Disabled
    Peer-to-Peer Blocking Action..................... Disabled
    Radio Policy..................................... All
    DTIM period for 802.11a radio.................... 1
    DTIM period for 802.11b radio.................... 1
    Radius Servers
    Authentication................................ 10.10.10.70 1812
    Accounting.................................... 10.10.10.70 1813
    Interim Update............................. Disabled
    Framed IPv6 Acct AVP ...................... Prefix
    Dynamic Interface............................. Disabled
    Dynamic Interface Priority.................... wlan
    Local EAP Authentication......................... Enabled (Profile 'local-eap-matrix')
    Security
    802.11 Authentication:........................ Open System
    FT Support.................................... Disabled
    Static WEP Keys............................... Disabled
    802.1X........................................ Disabled
    Wi-Fi Protected Access (WPA/WPA2)............. Enabled
    WPA (SSN IE)............................... Disabled
    WPA2 (RSN IE).............................. Enabled
    TKIP Cipher............................. Disabled
    AES Cipher.............................. Enabled
    Auth Key Management
    802.1x.................................. Disabled
    PSK..................................... Enabled
    CCKM.................................... Disabled
    FT-1X(802.11r).......................... Disabled
    FT-PSK(802.11r)......................... Disabled
    PMF-1X(802.11w)......................... Disabled
    PMF-PSK(802.11w)........................ Disabled
    FT Reassociation Timeout................... 20
    FT Over-The-DS mode........................ Disabled
    GTK Randomization.......................... Disabled
    SKC Cache Support.......................... Disabled
    CCKM TSF Tolerance......................... 1000
    WAPI.......................................... Disabled
    Wi-Fi Direct policy configured................ Disabled
    EAP-Passthrough............................... Disabled
    CKIP ......................................... Disabled
    Web Based Authentication...................... Enabled
    IPv4 ACL........................................ Unconfigured
    IPv6 ACL........................................ Unconfigured
    Web-Auth Flex ACL............................... Unconfigured
    Web Authentication server precedence:
    1............................................... local
    2............................................... radius
    3............................................... ldap
    Web-Passthrough............................... Disabled
    Conditional Web Redirect...................... Disabled
    Splash-Page Web Redirect...................... Disabled
    Auto Anchor................................... Disabled
    FlexConnect Local Switching................... Enabled
    flexconnect Central Dhcp Flag................. Disabled
    flexconnect nat-pat Flag...................... Disabled
    flexconnect Dns Override Flag................. Disabled
    flexconnect PPPoE pass-through................ Disabled
    flexconnect local-switching IP-source-guar.... Disabled
    FlexConnect Vlan based Central Switching ..... Disabled
    FlexConnect Local Authentication.............. Disabled
    FlexConnect Learn IP Address.................. Enabled
    Client MFP.................................... Optional
    PMF........................................... Disabled
    PMF Association Comeback Time................. 1
    PMF SA Query RetryTimeout..................... 200
    Tkip MIC Countermeasure Hold-down Timer....... 60
    Eap-params.................................... Disabled
    AVC Visibilty.................................... Disabled
    AVC Profile Name................................. None
    Flow Monitor Name................................ None
    Split Tunnel (Printers).......................... Disabled
    Call Snooping.................................... Disabled
    Roamed Call Re-Anchor Policy..................... Disabled
    SIP CAC Fail Send-486-Busy Policy................ Enabled
    SIP CAC Fail Send Dis-Association Policy......... Disabled
    KTS based CAC Policy............................. Disabled
    Assisted Roaming Prediction Optimization......... Disabled
    802.11k Neighbor List............................ Disabled
    802.11k Neighbor List Dual Band.................. Disabled
    Band Select...................................... Disabled
    Load Balancing................................... Disabled
    Multicast Buffer................................. Disabled
    Mobility Anchor List
    WLAN ID IP Address Status
    802.11u........................................ Disabled
    MSAP Services.................................. Disabled
    Local Policy
    Priority Policy Name
    The wireless user on joining the WLAN enters the PSK and than gets redirected to WLC Web Auth portal for authentication. On successful login, the user is granted access. The issue is that despite Idle Timeout being 28800 sec (8 hours), the WLC removes the client entry before 8 hours if the device goes to sleep - mostly within the first hour. Tested this on Windows 7 notebook multiple times. When the PC is put to sleep, the WLC loses its record after some time. When PC wakes up, it has to undergo Web Auth again. Debugging the client MAC generates these logs - from initial association to final clearing.
    (Cisco Controller) >*apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Association received from mobile on BSSID 00:26:cb:4c:89:d1
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Global 200 Clients are allowed to AP radio
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Max Client Trap Threshold: 0 cur: 1
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Rf profile 600 Clients are allowed to AP wlan
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 override for default ap group, marking intgrp NULL
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Applying Interface policy on Mobile, role Local. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 10
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Re-applying interface policy for client
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2219)
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2240)
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 apfApplyWlanPolicy: Apply WLAN Policy over PMIPv6 Client Mobility Type
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 In processSsidIE:4850 setting Central switched to FALSE
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Applying site-specific Local Bridging override for station 3c:a9:f4:0b:91:70 - vapId 2, site 'default-group', interface 'management'
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Applying Local Bridging Interface Policy for station 3c:a9:f4:0b:91:70 - vlan 10, interface id 0, interface 'management'
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 processSsidIE statusCode is 0 and status is 0
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 processSsidIE ssid_done_flag is 0 finish_flag is 0
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 STA - rates (6): 152 36 176 72 96 108 0 0 0 0 0 0 0 0 0 0
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 suppRates statusCode is 0 and gotSuppRatesElement is 1
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Processing RSN IE type 48, length 22 for mobile 3c:a9:f4:0b:91:70
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 AID 1 in Assoc Req from flex AP 00:26:cb:4c:89:d0 is same as in mscb 3c:a9:f4:0b:91:70
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 apfMs1xStateDec
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Change state to START (0) last state WEBAUTH_REQD (8)
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 pemApfAddMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 START (0) Initializing policy
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 START (0) Change state to AUTHCHECK (2) last state START (0)
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 AUTHCHECK (2) Change state to 8021X_REQD (3) last state AUTHCHECK (2)
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Encryption policy is set to 0x80000001
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Central switch is FALSE
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Sending Local Switch flag = 1
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 8021X_REQD (3) DHCP Not required on AP 00:26:cb:4c:89:d0 vapId 2 apVapId 2for this client
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 Not Using WMM Compliance code qosCap 00
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 10.10.1.130 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:26:cb:4c:89:d0 vapId 2 apVapId 2 flex-acl-name:
    *apfMsConnTask_0: Feb 04 07:48:10.562: 3c:a9:f4:0b:91:70 apfPemAddUser2 (apf_policy.c:333) Changing state for mobile 3c:a9:f4:0b:91:70 on AP 00:26:cb:4c:89:d0 from Associated to Associated
    *apfMsConnTask_0: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 apfPemAddUser2:session timeout forstation 3c:a9:f4:0b:91:70 - Session Tout 65535, apfMsTimeOut '65535' and sessionTimerRunning flag is 0
    *apfMsConnTask_0: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 Scheduling deletion of Mobile Station: (callerId: 49) in 65535 seconds
    *apfMsConnTask_0: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 Func: apfPemAddUser2, Ms Timeout = 65535, Session Timeout = 65535
    *apfMsConnTask_0: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 Sending Assoc Response to station on BSSID 00:26:cb:4c:89:d1 (status 0) ApVapId 2 Slot 0
    *apfMsConnTask_0: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 apfProcessAssocReq (apf_80211.c:8294) Changing state for mobile 3c:a9:f4:0b:91:70 on AP 00:26:cb:4c:89:d0 from Associated to Associated
    *pemReceiveTask: Feb 04 07:48:10.563: 3c:a9:f4:0b:91:70 10.10.1.130 Removed NPU entry.
    *spamApTask7: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Sent 1x initiate message to multi thread task for mobile 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Creating a PKC PMKID Cache entry for station 3c:a9:f4:0b:91:70 (RSN 2)
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Resetting MSCB PMK Cache Entry 0 for station 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Removing BSSID 00:26:cb:4c:89:d1 from PMKID cache of station 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Setting active key cache index 0 ---> 8
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Setting active key cache index 8 ---> 0
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Adding BSSID 00:26:cb:4c:89:d1 to PMKID cache at index 0 for station 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: New PMKID: (16)
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: [0000] 67 67 8f 7d 2a 8d 78 f9 6d 29 c7 74 d2 fd 6a 25
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Initiating RSN PSK to mobile 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 EAP-PARAM Debug - eap-params for Wlan-Id :2 is disabled - applying Global eap timers and retries
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 dot1x - moving mobile 3c:a9:f4:0b:91:70 into Force Auth state
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Skipping EAP-Success to mobile 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 EAPOL Header:
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 00000000: 02 03 5f 00 .._.
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Found an cache entry for BSSID 00:26:cb:4c:89:d1 in PMKID cache at index 0 of station 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Found an cache entry for BSSID 00:26:cb:4c:89:d1 in PMKID cache at index 0 of station 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: Including PMKID in M1 (16)
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: [0000] 67 67 8f 7d 2a 8d 78 f9 6d 29 c7 74 d2 fd 6a 25
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Starting key exchange to mobile 3c:a9:f4:0b:91:70, data packets will be dropped
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
    state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
    state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 Allocating EAP Pkt for retransmission to mobile 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 mscb->apfMsLwappLradNhMac = 00:0c:29:e4:e9:6a mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 mscb->apfMsBssid = 00:26:cb:4c:89:d0 mscb->apfMsAddress = 3c:a9:f4:0b:91:70 mscb->apfMsApVapId = 2
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 10 mscb->apfMsLwappMwarInet.ipv4.addr = 168430130
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.566: 3c:a9:f4:0b:91:70 mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 168427904 mscb->apfMsLwappLradPort = 41879
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.567: 3c:a9:f4:0b:91:70 Received EAPOL-Key from mobile 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Received EAPOL-key in PTK_START state (message 2) from mobile 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Stopping retransmission timer for mobile 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 EAPOL Header:
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 00000000: 02 03 5f 00 .._.
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
    state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
    state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 Reusing allocated memory for EAP Pkt for retransmission to mobile 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 mscb->apfMsLwappLradNhMac = 00:0c:29:e4:e9:6a mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 mscb->apfMsBssid = 00:26:cb:4c:89:d0 mscb->apfMsAddress = 3c:a9:f4:0b:91:70 mscb->apfMsApVapId = 2
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 10 mscb->apfMsLwappMwarInet.ipv4.addr = 168430130
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.568: 3c:a9:f4:0b:91:70 mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 168427904 mscb->apfMsLwappLradPort = 41879
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Received EAPOL-Key from mobile 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Received EAPOL-key in PTKINITNEGOTIATING state (message 4) from mobile 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Stopping retransmission timer for mobile 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Freeing EAP Retransmit Bufer for mobile 3c:a9:f4:0b:91:70
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 apfMs1xStateInc
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 8021X_REQD (3) Change state to L2AUTHCOMPLETE (4) last state 8021X_REQD (3)
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Central switch is FALSE
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Sending the Central Auth Info
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Central Auth Info Allocated PMKLen = 32
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: EapolReplayCounter: 00 00 00 00 00 00 00 01
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: EapolReplayCounter: 00 00 00 00 00 00 00 01
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 PMK: pmkActiveIndex = 0
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 EapolReplayCounter: 00 00 00 00 00 00 00 01
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 msAssocTypeFlagsMsb = 0 msAssocTypeFlagsLsb = 2
    apfMsEntryType = 0 apfMsEapType = 0
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Sending Local Switch flag = 1
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 L2AUTHCOMPLETE (4) DHCP Not required on AP 00:26:cb:4c:89:d0 vapId 2 apVapId 2for this client
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 Not Using WMM Compliance code qosCap 00
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 00:26:cb:4c:89:d0 vapId 2 apVapId 2 flex-acl-name:
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 L2AUTHCOMPLETE (4) Change state to WEBAUTH_REQD (8) last state L2AUTHCOMPLETE (4)
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) pemAdvanceState2 6236, Adding TMP rule
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Adding Fast Path rule
    type = Airespace AP Client - ACL passthru
    on AP 00:26:cb:4c:89:d0, slot 0, interface = 1, QOS = 0
    IPv4 ACL ID
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Fast Path rule (contd...) 802.1P = 2, DSCP = 0, TokenID = 64206 Local Bridging Vlan = 10, Local Bridging intf id = 0
    *Dot1x_NW_MsgTask_0: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255, L2 ACL ID 255)
    *spamApTask7: Feb 04 07:48:10.569: 3c:a9:f4:0b:91:70 spamEncodeCentralAuthInoMsPayload: msAssocTypeFlagsMsb = 0 msAssocTypeFlagsLsb = 2
    apfMsEntryType = 0 pmkLen = 32
    *pemReceiveTask: Feb 04 07:48:10.570: 3c:a9:f4:0b:91:70 10.10.1.130 Added NPU entry of type 2, dtlFlags 0x0
    *pemReceiveTask: Feb 04 07:48:10.570: 3c:a9:f4:0b:91:70 Pushing IPv6: fe80:0000:0000:0000:c915:4a8e:6d1a:e20d , and MAC: 3C:A9:F4:0B:91:70 , Binding to Data Plane. SUCCESS !!
    *DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP received op BOOTREPLY (2) (len 308,vlan 10, port 1, encap 0xec03)
    *DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP processing DHCP ACK (5)
    *DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
    *DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP xid: 0xcce207f6 (3437365238), secs: 0, flags: 0
    *DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP chaddr: 3c:a9:f4:0b:91:70
    *DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP ciaddr: 0.0.0.0, yiaddr: 10.10.1.130
    *DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP siaddr: 0.0.0.0, giaddr: 0.0.0.0
    *DHCP Socket Task: Feb 04 07:48:10.589: 3c:a9:f4:0b:91:70 DHCP server id: 10.10.1.20 rcvd server id: 10.10.1.20
    *SNMPTask: Feb 04 07:48:16.594: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *SNMPTask: Feb 04 07:48:16.594: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *SNMPTask: Feb 04 07:48:16.595: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *SNMPTask: Feb 04 07:48:16.595: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *ewmwebWebauth1: Feb 04 07:48:31.129: 3c:a9:f4:0b:91:70 Username entry (local1) created for mobile, length = 6
    *ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 Username entry (local1) created in mscb for mobile, length = 6
    *ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_REQD (8) Change state to WEBAUTH_NOL3SEC (14) last state WEBAUTH_REQD (8)
    *ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 apfMsRunStateInc
    *ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 10.10.1.130 WEBAUTH_NOL3SEC (14) Change state to RUN (20) last state WEBAUTH_NOL3SEC (14)
    *ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 Session Timeout is 65535 - starting session timer for the mobile
    *ewmwebWebauth1: Feb 04 07:48:31.130: 3c:a9:f4:0b:91:70 10.10.1.130 RUN (20) Reached PLUMBFASTPATH: from line 6571
    *ewmwebWebauth1: Feb 04 07:48:31.131: 3c:a9:f4:0b:91:70 10.10.1.130 RUN (20) Replacing Fast Path rule
    type = Airespace AP Client
    on AP 00:26:cb:4c:89:d0, slot 0, interface = 1, QOS = 0
    IPv4 ACL ID = 255, IPv6 ACL ID =
    *ewmwebWebauth1: Feb 04 07:48:31.131: 3c:a9:f4:0b:91:70 10.10.1.130 RUN (20) Fast Path rule (contd...) 802.1P = 2, DSCP = 0, TokenID = 64206 Local Bridging Vlan = 10, Local Bridging intf id = 0
    *ewmwebWebauth1: Feb 04 07:48:31.131: 3c:a9:f4:0b:91:70 10.10.1.130 RUN (20) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255, L2 ACL ID 255)
    *pemReceiveTask: Feb 04 07:48:31.132: 3c:a9:f4:0b:91:70 10.10.1.130 Added NPU entry of type 1, dtlFlags 0x0
    (Cisco Controller) >
    (Cisco Controller) >
    (Cisco Controller) >
    (Cisco Controller) >
    (Cisco Controller) >
    (Cisco Controller) >
    (Cisco Controller) >
    (Cisco Controller) >
    (Cisco Controller) >*pemReceiveTask: Feb 04 07:48:31.132: 3c:a9:f4:0b:91:70 Pushing IPv6: fe80:0000:0000:0000:c915:4a8e:6d1a:e20d , and MAC: 3C:A9:F4:0B:91:70 , Binding to Data Plane. SUCCESS !!
    *emWeb: Feb 04 07:49:14.120: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *emWeb: Feb 04 07:49:14.120: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *emWeb: Feb 04 07:49:14.120: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *SNMPTask: Feb 04 07:51:19.646: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *SNMPTask: Feb 04 07:51:19.646: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *SNMPTask: Feb 04 07:51:19.662: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *SNMPTask: Feb 04 07:51:19.662: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *SNMPTask: Feb 04 07:51:19.663: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *SNMPTask: Feb 04 07:51:19.663: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *IPv6_Msg_Task: Feb 04 07:53:35.661: 3c:a9:f4:0b:91:70 Link Local address fe80::c915:4a8e:6d1a:e20d updated to mscb. Not Advancing pem state.Current state: mscb in apfMsMmInitial mobility state and client state APF_MS_STATE_A
    *dot1xMsgTask: Feb 04 07:54:26.664: GTK Rotation Kicked in for AP: 00:26:cb:4c:89:d0 SlotId = 1 - (0x47440ef0)
    *dot1xMsgTask: Feb 04 07:54:26.665: Generated a new group key for AP 00:26:cb:4c:89:d0(1) - vap 1
    *dot1xMsgTask: Feb 04 07:54:26.665: Sending of M5 for 00:26:cb:4c:89:d0 is Skipped, rc = 1
    *dot1xMsgTask: Feb 04 07:54:26.665: Generated a new group key for AP 00:26:cb:4c:89:d0(1) - vap 2
    *dot1xMsgTask: Feb 04 07:54:26.665: Sending of M5 for 00:26:cb:4c:89:d0 is Skipped, rc = 1
    *SNMPTask: Feb 04 07:56:19.689: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *SNMPTask: Feb 04 07:56:19.689: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *SNMPTask: Feb 04 08:01:19.730: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *SNMPTask: Feb 04 08:01:19.730: 3c:a9:f4:0b:91:70 Central Switch = FALSE
    *dot1xMsgTask: Feb 04 08:01:23.904: GTK Rotation Kicked in for AP: 00:26:cb:4c:89:d0 SlotId = 0 - (0x47440ef0)
    *dot1xMsgTask: Feb 04 08:01:23.904: Generated a new group key for AP 00:26:cb:4c:89:d0(0) - vap 1
    *dot1xMsgTask: Feb 04 08:01:23.905: Sending of M5 for 00:26:cb:4c:89:d0 is Skipped, rc = 1
    *dot1xMsgTask: Feb 04 08:01:23.905: Generated a new group key for AP 00:26:cb:4c:89:d0(0) - vap 2
    *dot1xMsgTask: Feb 04 08:01:23.905: GTK rotation for 3c:a9:f4:0b:91:70
    *dot1xMsgTask: Feb 04 08:01:23.905: 3c:a9:f4:0b:91:70 EAPOL Header:
    *dot1xMsgTask: Feb 04 08:01:23.905: 00000000: 02 03 5f 00 .._.
    *dot1xMsgTask: Feb 04 08:01:23.905: 3c:a9:f4:0b:91:70 Key exchange done, data packets from mobile 3c:a9:f4:0b:91:70 should be forwarded shortly
    *dot1xMsgTask: Feb 04 08:01:23.905: 3c:a9:f4:0b:91:70 Key exchange done, data packets from mobile 3c:a9:f4:0b:91:70 should be forwarded shortly
    *dot1xMsgTask: Feb 04 08:01:23.906: Confirmation Key: (16)
    *dot1xMsgTask: Feb 04 08:01:23.906: [0000] fa a3 68 28 46 1f 49 18 a0 60 7a 92 c4 f5 64 3d
    *dot1xMsgTask: Feb 04 08:01:23.906: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
    state PTKINITDONE (message 5 - group), replay counter 00.00.00.00.00.00.00.02
    *dot1xMsgTask: Feb 04 08:01:23.906: 3c:a9:f4:0b:91:70 Sending EAPOL-Key Message to mobile 3c:a9:f4:0b:91:70
    state PTKINITDONE (message 5 - group), replay counter 00.00.00.00.00.00.00.02
    *dot1xMsgTask: Feb 04 08:01:23.906: 3c:a9:f4:0b:91:70 Allocating EAP Pkt for retransmission to mobile 3c:a9:f4:0b:91:70
    *dot1xMsgTask: Feb 04 08:01:23.906: 3c:a9:f4:0b:91:70 mscb->apfMsLwappLradNhMac = 00:0c:29:e4:e9:6a mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
    *dot1xMsgTask: Feb 04 08:01:23.906: 3c:a9:f4:0b:91:70 mscb->apfMsBssid = 00:26:cb:4c:89:d0 mscb->apfMsAddress = 3c:a9:f4:0b:91:70 mscb->apfMsApVapId = 2
    *dot1xMsgTask: Feb 04 08:01:23.907: 3c:a9:f4:0b:91:70 dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 1 mscb->apfMsLwappLradVlanId = 10 mscb->apfMsLwappMwarInet.ipv4.addr = 168430130
    *dot1xMsgTask: Feb 04 08:01:23.907: 3c:a9:f4:0b:91:70 mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 168427904 mscb->apfMsLwappLradPort = 41879
    *dot1xMsgTask: Feb 04 08:01:23.907: 3c:a9:f4:0b:91:70 Updated broadcast key sent to mobile 3C:A9:F4:0B:91:70
    *dot1xMsgTask: Feb 04 08:01:23.907: 3c:a9:f4:0b:91:70 Updated broadcast key sent to mobile 3C:A9:F4:0B:91:70
    *dot1xMsgTask: Feb 04 08:01:23.907: Sending of M5 for 00:26:cb:4c:89:d0 is Skipped, rc = 1
    *osapiBsnTimer: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 802.1x 'timeoutEvt' Timer expired for station 3c:a9:f4:0b:91:70 and for message = M5
    *dot1xMsgTask: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 Retransmit 1 of EAPOL-Key M5 (length 131) for mobile 3c:a9:f4:0b:91:70
    *dot1xMsgTask: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 mscb->apfMsLwappLradNhMac = 00:0c:29:e4:e9:6a mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
    *dot1xMsgTask: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 mscb->apfMsBssid = 00:26:cb:4c:89:d0 mscb->apfMsAddress = 3c:a9:f4:0b:91:70 mscb->apfMsApVapId = 2
    *dot1xMsgTask: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 1 mscb->apfMsLwappLradVlanId = 10 mscb->apfMsLwappMwarInet.ipv4.addr = 168430130
    *dot1xMsgTask: Feb 04 08:01:25.104: 3c:a9:f4:0b:91:70 mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 168427904 mscb->apfMsLwappLradPort = 41879
    *osapiBsnTimer: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 802.1x 'timeoutEvt' Timer expired for station 3c:a9:f4:0b:91:70 and for message = M5
    *dot1xMsgTask: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 Retransmit 2 of EAPOL-Key M5 (length 131) for mobile 3c:a9:f4:0b:91:70
    *dot1xMsgTask: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 mscb->apfMsLwappLradNhMac = 00:0c:29:e4:e9:6a mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
    *dot1xMsgTask: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 mscb->apfMsBssid = 00:26:cb:4c:89:d0 mscb->apfMsAddress = 3c:a9:f4:0b:91:70 mscb->apfMsApVapId = 2
    *dot1xMsgTask: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 1 mscb->apfMsLwappLradVlanId = 10 mscb->apfMsLwappMwarInet.ipv4.addr = 168430130
    *dot1xMsgTask: Feb 04 08:01:26.104: 3c:a9:f4:0b:91:70 mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 168427904 mscb->apfMsLwappLradPort = 41879
    *osapiBsnTimer: Feb 04 08:01:27.104: 3c:a9:f4:0b:91:70 802.1x 'timeoutEvt' Timer expired for station 3c:a9:f4:0b:91:70 and for message = M5
    *dot1xMsgTask: Feb 04 08:01:27.104: 3c:a9:f4:0b:91:70 Retransmit failure for EAPOL-Key M5 to mobile 3c:a9:f4:0b:91:70, retransmit count 3, mscb deauth count 0
    *dot1xMsgTask: Feb 04 08:01:27.104: 3c:a9:f4:0b:91:70 Resetting MSCB PMK Cache Entry 0 for station 3c:a9:f4:0b:91:70
    *dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Removing BSSID 00:26:cb:4c:89:d1 from PMKID cache of station 3c:a9:f4:0b:91:70
    *dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Setting active key cache index 0 ---> 8
    *dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Sent Deauthenticate to mobile on BSSID 00:26:cb:4c:89:d0 slot 0(caller 1x_ptsm.c:598)
    *dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Setting active key cache index 8 ---> 8
    *dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Deleting the PMK cache when de-authenticating the client.
    *dot1xMsgTask: Feb 04 08:01:27.105: 3c:a9:f4:0b:91:70 Global PMK Cache deletion failed.
    *dot1xMsgTask: Feb 04 08:01:27.106: 3c:a9:f4:0b:91:70 Scheduling deletion of Mobile Station: (callerId: 57) in 10 seconds
    *dot1xMsgTask: Feb 04 08:01:27.106: 3c:a9:f4:0b:91:70 Freeing EAP Retransmit Bufer for mobile 3c:a9:f4:0b:91:70
    *osapiBsnTimer: Feb 04 08:01:37.105: 3c:a9:f4:0b:91:70 apfMsExpireCallback (apf_ms.c:626) Expiring Mobile!
    *apfReceiveTask: Feb 04 08:01:37.105: 3c:a9:f4:0b:91:70 apfMsExpireMobileStation (apf_ms.c:6655) Changing state for mobile 3c:a9:f4:0b:91:70 on AP 00:26:cb:4c:89:d0 from Associated to Disassociated
    *apfReceiveTask: Feb 04 08:01:37.105: 3c:a9:f4:0b:91:70 Scheduling deletion of Mobile Station: (callerId: 45) in 10 seconds
    *osapiBsnTimer: Feb 04 08:01:47.105: 3c:a9:f4:0b:91:70 apfMsExpireCallback (apf_ms.c:626) Expiring Mobile!
    *apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 Sent Deauthenticate to mobile on BSSID 00:26:cb:4c:89:d0 slot 0(caller apf_ms.c:6749)
    *apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 Setting active key cache index 8 ---> 8
    *apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 Deleting the PMK cache when de-authenticating the client.
    *apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 Global PMK Cache deletion failed.
    *apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 apfMsAssoStateDec
    *apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 apfMsExpireMobileStation (apf_ms.c:6787) Changing state for mobile 3c:a9:f4:0b:91:70 on AP 00:26:cb:4c:89:d0 from Disassociated to Idle
    *apfReceiveTask: Feb 04 08:01:47.106: 3c:a9:f4:0b:91:70 Scheduling deletion of Mobile Station: (callerId: 47) in 10 seconds
    *osapiBsnTimer: Feb 04 08:01:57.106: 3c:a9:f4:0b:91:70 apfMsExpireCallback (apf_ms.c:626) Expiring Mobile!
    *apfReceiveTask: Feb 04 08:01:57.106: 3c:a9:f4:0b:91:70 pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
    *apfReceiveTask: Feb 04 08:01:57.106: 3c:a9:f4:0b:91:70 10.10.1.130 START (0) Deleted mobile LWAPP rule on AP [00:26:cb:4c:89:d0]
    *apfReceiveTask: Feb 04 08:01:57.106: 3c:a9:f4:0b:91:70 Username entry deleted for mobile
    *apfReceiveTask: Feb 04 08:01:57.106: 3c:a9:f4:0b:91:70 Deleting mobile on AP 00:26:cb:4c:89:d0(0)
    If Layer-2 Auth (PSK) is set to "none" and only Layer-3 Web Auth is kept, then there are no issues. PC can wake up before 8 hours and not prompted for Web Auth again. As a test, I setup the WLAN with Layer-2 PSK auth only with Layer-3 auth set to none. The WLC removed the client entry after 25 minutes. Not an issue for PSK based auth only as PC on wake up seamlessly gets associated to WLAN. 
    Is User Idle Timeout setting not valid when WPA2-PSK is used as the auth method ?
    Thanks, 
    Rick.

    Thanks Scott, The code version is 7.6.130.0 which supports Sleeping Client feature. However, as per the docu "http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration-guide/b_cg76/b_cg76_chapter_010111.html#reference_7008E6F7D7094BA7AD39491D7361622D"
    The authentication of sleeping clients feature is not supported with Layer 2 security and web authentication enabled.
    and as you mentioned as well
    ...Sleeping client like George mentioned is a better way than adjusting the idle timer but strictly for layer 3 only...
    Sleeping Client wasn't an option in my case. That is why I was hoping that Idle Timeout may do the trick here. This is an actual case where a client with an existing wireless network just wanted to enable sleeping client feature so that their guests don't need to re-auth if their device sleeps or they go out (break) and come back after some time. Layer-3 Web Auth alone should be enough I think. Keeping L2-PSK is probably their security team's decision, as they also use the same SSID for BYOD devices and don't want nearby people/buildings to see that there is an Open Wifi available and on joining would see the Web Auth portal and company disclaimer. 
    George, I agree with Dot1X method. It can be used for the BYOD devices (separate SSID) while we can keep the Guest WLAN as L3-WebAuth only on controller (or do CWA through ISE if available). 
    Thanks for all your help.
    Rick.

  • Weblogic server closed connection after idle timeout

    I have the Weblogic webserver set up to automatically come on at 0600 each morning. This morning I received the following error message and the server was displaying an Error 503--Service Unavailable message:
    Here is the output form the log file:" Does anyone have any idea as to why the idle timeout closed the connectino to the server. This has never happened before?
    <Dec 9, 2009 6:05:21 AM CET> <Notice> <WebLogicServer> <BEA-000331> <Started Web
    Logic Admin Server "AdminServer" for domain "WUIMMS" running in Development Mode
    >
    <Dec 9, 2009 6:05:21 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server stat
    e changed to RUNNING>
    <Dec 9, 2009 6:05:21 AM CET> <Notice> <WebLogicServer> <BEA-000360> <Server star
    ted in RUNNING mode>
    <Dec 9, 2009 7:08:02 AM CET> <Warning> <Socket> <BEA-000449> <Closing socket as
    no data read from it during the configured idle timeout of 25 secs>
    <Dec 9, 2009 7:10:17 AM CET> <Warning> <Socket> <BEA-000449> <Closing socket as
    no data read from it during the configured idle timeout of 25 secs>
    <Dec 9, 2009 7:10:22 AM CET> <Warning> <Socket> <BEA-000449> <Closing socket as
    no data read from it during the configured idle timeout of 25 secs>
    <Dec 9, 2009 7:11:12 AM CET> <Warning> <Socket> <BEA-000449> <Closing socket as
    no data read from it during the configured idle timeout of 25 secs>
    <Dec 9, 2009 7:12:12 AM CET> <Warning> <Socket> <BEA-000449> <Closing socket as
    no data read from it during the configured idle timeout of 25 secs>
    <Dec 9, 2009 7:13:32 AM CET> <Warning> <Socket> <BEA-000449> <Closing socket as
    no data read from it during the configured idle timeout of 25 secs>
    <Dec 9, 2009 7:17:12 AM CET> <Warning> <Socket> <BEA-000449> <Closing socket as
    no data read from it during the configured idle timeout of 25 secs>
    <Dec 9, 2009 7:18:02 AM CET> <Warning> <Socket> <BEA-000449> <Closing socket as
    no data read from it during the configured idle timeout of 25 secs>

    192.168.250.145 is the local machine's IP ( "Powered-On Machine"),
    my convert setting likes follows,
    Source Type : Powered-On Machine / This Local Machine
    Location for the Virtual machine : D:\VM_PC
    attached log file is my latest Try today.

  • Sharepoint Idle timeout on page with Provider hosted app

    We have a Sharepoint idle timeout implemented using javascript which triggers on every page load initializes and timer counts to say 60sec as configured when idle .On reaching the time the script triggers a window.href to the ADFS logout page.This is fine.
    Issue comes when user is working on a provider hosted app in a sharepoint page.Since any postback inside the app(iframe) does not reload sharepoint page the js timer reaches the value and logs
    out.
    How can this be achieved.any inputs.

    https://social.technet.microsoft.com/Forums/lync/en-US/85f52c85-f2e3-4930-894e-2d7a198a39de/redirecting-user-from-app-part-to-a-list-in-host-web?forum=sharepointdevelopment 
    Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

  • "dialer idle-timeout" fails

    Hi all,
    I have this configuration:
    version 12.2
    service nagle
    no service pad
    service tcp-keepalives-in
    service tcp-keepalives-out
    service timestamps debug datetime
    service timestamps log datetime msec localtime
    service password-encryption
    service internal
    service sequence-numbers
    hostname c3620
    ip subnet-zero
    no ip source-route
    ip rtp coalesce
    ip cef
    ip tcp selective-ack
    ip tcp path-mtu-discovery
    interface Ethernet1/0
    bandwidth 10000
    ip address 172.16.0.1 255.255.255.248
    ip verify unicast reverse-path
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip nat inside
    full-duplex
    interface BRI1/0
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip nat outside
    encapsulation ppp
    dialer rotary-group 0
    isdn switch-type basic-net3
    isdn spid1 985123123
    isdn timeout-signaling
    no cdp enable
    interface Dialer0
    bandwidth 64
    ip address negotiated
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip nat outside
    service-policy output QoS-RDSI
    encapsulation ppp
    dialer in-band
    dialer idle-timeout 0
    dialer string 909250250
    dialer-group 1
    no cdp enable
    ppp authentication pap callin
    ppp chap hostname tu@eresmas
    ppp chap password 7 00000
    ppp pap sent-username tu@eresmas password 7 00000
    ip nat translation tcp-timeout 1800
    ip nat inside source list 150 interface Dialer0 overload
    ip classless
    ip route 0.0.0.0 0.0.0.0 Dialer0
    access-list 1 permit 172.16.0.2
    access-list 1 permit 172.16.0.3
    access-list 150 remark ** Dialer-list 1 y Ip nat inside **
    access-list 150 permit tcp 172.16.0.0 0.0.0.7 gt 1023 any
    access-list 150 permit udp 172.16.0.0 0.0.0.7 gt 1023 any
    access-list 150 permit icmp 172.16.0.0 0.0.0.7 any
    dialer-list 1 protocol ip list 150
    dial-peer cor custom
    line con 0
    logging synchronous
    line aux 0
    line vty 0 4
    access-class 1 in
    logging synchronous
    transport input telnet ssh
    end
    (I avoid user accounts and other commands that I think are not interesting for my problem at all)
    Ok, my problem is that "dialer idle-timeout" under diler0 interface doesn't run.
    As I read into the documentation the interesting traffic should use ACL 150 and then resets the dialer counter in order to mantain the call/internet connetion UP.
    That is not the case. The diale counter ends and the connection must be re-established.
    Any suggestions?
    I don't know what to try.
    Thanks.

    Hi Rick,
    Changes into configuration were...
    no access-list 150
    access-list 150 remark ** IP NAT inside **
    access-list 150 permit tcp 172.16.0.0 0.0.0.7 gt 1023 any
    access-list 150 permit udp 172.16.0.0 0.0.0.7 gt 1023 any
    access-list 150 permit icmp 172.16.0.0 0.0.0.7 any
    access-list 151 remark ** Dialer List **
    access-list 151 permit tcp 172.16.0.0 0.0.0.7 gt 1023 any
    access-list 151 permit udp 172.16.0.0 0.0.0.7 gt 1023 any
    access-list 151 permit icmp 172.16.0.0 0.0.0.7 any
    no dialer-list 1 protocol ip list 150
    dialer-list 1 protocol ip list 151
    As you can see I made two ACLs, one for NAT and other for the "dialer-list" command.
    Then, I modified the "dialer idle-timeout" under Dialer0 interface and I changed it to 90 seconds.
    After that I executed "show dialer" with this result:
    # show dialer
    Dial reason: ip (s=172.16.0.3, d=61.155.39.144)
    Time until disconnect 81 secs
    Ok, idle counter is running!!
    I did a ping against 61.155.39.144 (it replied correctly) and the idle counter didn't reset to the 90 seconds :(
    Another strange thing is that Dialer0 interface always appears with "no ip route-cache cef", but I can force the interface to use CEF. It doesn't matter if I save the config with CEF, after a reboot the Dialer0 interface appears as "no ip route-cache cef". I don't know if this issue has relation with the "dialer idle-timeout" command. I don't think so since I have the same "dialer idle-timeout" with and without CEF. This issue calls my attention too because I never see it before.
    More info, IOS Version:
    3600 Software (C3620-IK9S-M), Version 12.2(28a), RELEASE SOFTWARE (fc2)
    c3620-ik9s-mz.122-28a.bin
    I hope this helps

  • Stateless session beans and idle timeouts (weblogic 10.3.1)

    Need clarification about stateless session beans and the idle-timeout-seconds setting.
    Situation is this – we have a process that is timing out due to an API call to a very slow Authentication server.
    I am trying to resolve this with a code change, but need to further other understand what the server is actually doing.
    We have a session bean which calls another which is calling a util class that does all the work and returns the results back up to the initial session bean. I have left out the ejbName in these examples (it’s irrelevant here).
    Example:
    SessionBean1 // basically called just once a day
    @Session(defaultTransaction = Constants.TransactionAttribute.SUPPORTS,
    enableCallByReference = Constants.Bool.TRUE,
    type = Session.SessionType.STATELESS,
    transTimeoutSeconds = "0",
    initialBeansInFreePool = "0",
    maxBeansInFreePool = "20")
    Methods
    @RemoteMethod() public boolean getUserList(String adminGroup) {
    Map usrList = getUserList(adminGroup);
    Private Map getUserList(String adminGroup) {
         return SessionBean2.getUsers(adminGroup);
    SessonBean2
    @Session(defaultTransaction = Constants.TransactionAttribute.SUPPORTS,
    enableCallByReference = Constants.Bool.TRUE,
    type = Session.SessionType.STATELESS,
    transTimeoutSeconds = "0",
    initialBeansInFreePool = "3",
    maxBeansInFreePool = "20")
    Method
    @RemoteMethod() public Map getUsers(String adminGroup) throws RemoteException {
    return javaUtilClass.getUsers(adminGroup);
    JavaUtilClass
    Method
    public Map getUsers(String adminGroup) throws RemoteException {
         // This is where the work happens, calling the Authentication server to get a complete
         // list of users for an admin group. When the user list is around 1500 entries, this can
         // take an hour. Did I mention this server is very slow? It’s about this threshold of 1500
         // that causes the timeout.
         return Map of users
    First thought, just bump the idle-timeout-seconds setting for the session beans (from the default 600), but that would be a temporary solution until the user list grew larger.
    Second thought, refactor the call to the Authentication Server API to get the user list in blocks of data (say 400 at a time) and decreasing the call/response time between the method getUsers and the API call. This would still occur in the JavaUtilClass, so I am unsure this would make a difference. The session beans would still be idle and subject to timeout, correct?
    Would setting initialBeansInFreePool to 1 in SessionBean1 make any difference?
    Or should I be looking at replicating the re-factored method from the JavaUtilClass in SessionBean1 where the user list is being used so that the API calls come back to it and keep it 'active'?
    Thanks for any advice you could give me on this.

    Hi
    regarding timeouts, there are two ways:
    1.- Changing the settings in the JTA WebLogic domain , called "Timeout Seconds". This will affect globally to all EJB deployed in the domain.
    or
    2.- Specified directly in the bean with a weblogic annotation, like this:
    @TransactionTimeoutSeconds(value = 300)I hope this will help you.
    Regards.
    Felipe

  • Idle Timeout and "Connection reset by peer"

    Is there a connection between the Idle Timeout Setting and getting the "Connection reset by peer error". If I increase the  Idle Timeout value am I less likely to get the "Connection reset by peer " issue. It is currently set to 30 seconds
    We are printing over a WAN and regularly get this error on a hp LaserJet 4250n
    Also what is the difference between Idle Timeout and I-O timeout ?

    Interesting, I am going to do some research into this tomorrow, as this is not a feature that I work with much. I will get back in touch with you once I have more information so we can test different settings to see if we are able to resolve the issue. 
    -Spencer 
    Have a wonderful day!  

  • Idle-timeout

    We have ASA5550, Active Directory, and RADIUS server. How do you setup idle-timeout? I want to disconnect the computer after 2 hours of inactivity.
    Diane
    Thanks.

    You are correct. The "isakamp keepalive" was disabled. Once it is enabled, the idle-timeout is working. However, if I enable "isakamp keepalive", my Load Balancing is not working. The VPN client only goes to one ASA box. When the second VPN client connects to the second ASA box, the VPN client never connects and got the error message "Reason 433: Reason not specified by Peer". Do you have any other suggestions?
    Thanks.
    Diane

  • IDLE-TIMEOUT IN ISDN BRI INTERFACE

    If bri isdn interface is backup by serial interface. Two commands are president for timeout bri interface
    one under backup serial interface
    1. backup delay 10 30
    The other under bri interface
    2. dialer idle-timeout 800
    My query is when interface serial comes back what will be time bri interface to in the disconnect position 30 or 800.

    hi
    AFAIK ideally the time would be 830 (30+800) coz the traffic will only get diverted back to serial interface after its observed stable for the configured time period which is 30 here.
    Once it starts getting the traffic thru main serial interface the dialer interface will become idle..
    so it will have to stay upto the timeout period (800 here)configured to get disconnected..
    regds

  • Idle timeout with VPN remote users coming into a COncentrator 3030

    I have a VPN Concentrator 3030, which my remote users connect to from home. The idle timeout is set to 30 minutes, however, I do not see anyone disconnected due to lack of activity, even if they are connected for over 24 hours. I assume that they are keeping MS Outlook open and that emails will pop up in their Inbox while connected. I'm sure that Exchange & Outlook are communicating back and forth, and this this is probably the traffic that is keeping the connection "active".
    How do I enforce the "Inactive" policy. Can I exclude certain types of traffic?

    Microsoft Internet Explorer (MSIE) users add the VPN Concentrator 3000 to the list of trusted sites. Doing so enables the ActiveX control to install with minimal interaction from the user. This is particularly important for users of Windows XP SP2 with enhanced security. Refer to the following sections for instructions.
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/prod_release_note09186a0080405b6c.html

  • Idle timeout limit

    Hi!
    How can we increase the remote desktop connection idle timeout limit in windows 2012? The remote desktop host configuration option is not available in Remote desktop service under administrative tools.
    Thanks.

    Hi,
    If the RDSH server is part of a collection then you can set the session timeouts in Server Manager -- RDS -- Collections -- <collection> -- Edit Properties -- Session tab.
    If the server is not part of a collection then you need to set the timeouts via group policy setting.  For example, the settings are located under this path:
    Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Session Time Limits
    -TP

  • Idle timeout for cisco anyconnect vpn client

    Hi All,
    Can you please let me know how to set idle timeout for the cisco vpn client, I configured the idle timeout setting under the group policy for the ssl vpn but it is not making any difference, is there any bug in asa firmware ? but I am using the latest version 9.3(2) now but this change is not taking any effect.
    Please let me know if you need more information, config etc ?
    Thanks

    Hi Alex,
    That file is indeed subjected to the same download restrictions than the other Anyconnect client files. You should contact the person who provided you with the Anyconnect  client installer, or who is managing the ASA that you are connecting  to, asking her/him to get the file and provide it to you - that person  should have the necessary access rights.
    Alternatively there is a command line interface executable provided as part of the Anyconnect  client, which can return tunnel statistics (among which tunnel status) -  invoking that program and parsing the output should be doable from  pretty much any programming/scripting tool - not the most optimal  approach in C++ though, but you wouldn't need anything else than what is provided with the client software.
    The executable is with the other Anyconnect client files and is named vpncli.exe.
    Try vpncli -h to get the argument syntax.
    I hope it helps, please let me know.
    Best regards,
    Christophe

Maybe you are looking for

  • Hiding a UI element in a View

    Dear All, I am enhancing a standard web dynpro component HAP_DOCUMENT_BODY, view VW_TABS_VIEW where I would have to add an Image on the first tab of the tab strip. So i have Imported a MIME object inside the standard application and have bouned it to

  • Type not lining through in browser

    I have created a simple holding page for a client, which I have lined type through top and bottom with a logo.  The top type when viewed in browser stays correctly positioned, but the type at the bottom which I have lined the baseline through with th

  • Problem rewarding points

    Hi guys, I would like to give points for this topic: Database copy on same server but it's not possible, I had the same problem for an older topic too... The error is: Community Forums Error Error: Rewarding the message failed.

  • Anyone Know what this # is? Comments to a social site?

    540xxxxxxx >>personal information removed<< Message was edited by: Verizon Moderator

  • HT5192 iOS 5.1 Error

    Why does my iPad 2, and iPhone 4 keep saying an error occured when I try and update both my iOS 5.1 products to iOS 5.1?