Idoc ---- BPM ------ file

hello experts,
I have Idoc to file scenario by using BPM,
I have generated IDoc and it generated successfully
Idoc reached from SAP to XI. but, it is not entering into BPM.
i have checked the queue, refreshed chache and restarted the BPM.
i was not able to reactivate BPM becuase it in Quality(4 days back only i have trasported from DEV to QA)
can anybody provide some idea to resolve this issue ASAP.
Thanks in Advance.
Radhika

Hi,
I hope you might have already confirm with the Receiver step parameters.
Is it working fine in your development system. Have you tested over there.
Check if all objects have properly transported to Q.
Thanks
Swarup

Similar Messages

IDOC-BPM-FILE scenario ERRORS

Hi gurus,
I am trying to send IORDER01(pm order) from an R/3 system to a file, which works fine.
but when i try to use some business logic like if order type = 'PM01' then only i have to write to the file, using ccBPM, it fails...
this is my first BPM scenario and am having trouble....have read lot of blogs etc...can u please tell me where i am going wrong...
I have a data type DT_FILE for writing to the file.
I have interfaces:
si_oa_iorder(outbound asynchronous interface for file)
si_aa_iorder(abstract asynchronous interface for idoc)
si_aa_file( abstract asynchronous interface for file)
si_ia_file (inbound asynchronous interface for file)
I have message mapping MM_IORDER2FILE mapping IDoc to flat file structure
I have operation mapping OM_IORDER2FILE where I have mapped si_aa_iorder and si_aa_file
(( Is this right? are both abstract interfaces to be mapped? or do i need to create more mappings like si_oa_iorder to si_aa_iorder etc? please clarify...))
My IP is very simple with just a 'recv step' having container element of type si_aa_iorder and 'send step' having container element of type si_aa_file to start with..i haven't yet put the switch control etc...even such simple IP fails....
I have created Configuration objects like
Business System for file receiver
Business component for Idoc sender with adapter specific details set
Communication channels for Idoc and file adapters
No sender agreement as it is Idoc communication
Receiver agreement between the Integration Process(IP_IORDER2FILE) and the file server
2 Receiver determinations between BC_idoc_send to IP and other from IP to FileRecv system
2 interface determinations , one from si_oa_iorder of BC_idoc_send to IP and other from si_aa_file of IP to file recv system.
This is my setup and this fails....
My question is..is my message mapping and operation mappings correct? and can u see any obvious blunders i am doing?
please bear in mind that with same interfaces and sending and recv components, it runs fine without BPM....so please look at the BPM bit of mappings/config that i might have missed and please advice asap..
Thanks in advance and i am sure there would be lot of gurus for whome it is just a peanut...so please reply...
Regards
Jhansi

Hello,
I am trying to implement one pi scenario :
File -> file adapter -> ccBPM -> soap receiver adapter -> web service request -> web service response -> ccBPM -> output file adapter.
The web service that I call works file from wsnavigator. I have created all the design and configuration objects
needed for the scenario.
I place a file with following contents:
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body>
    <pns:GetSetNameWS xmlns:pns="urn:file2soap2fileWSVi">
     <pns:name1>ajeet</pns:name1>
      <pns:name2>phadnis</pns:name2>
    </pns:GetSetNameWS>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
When I look at the process monitor I get this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have no clue about this error. Can you help me with this ?
If yes I can send you more details, if you liked 
Hoping to get help from you,
Cheers,
Ajeet Phadnis

Idoc-bpm-file scenario

Hi gurus,
I am trying to send IORDER01(pm order) from an R/3 system to a file, which works fine.
but when i try to use some business logic like if order type = 'PM01' then only i have to write to the file, using ccBPM, it fails...
this is my first BPM scenario and am having trouble....have read lot of blogs etc...can u please tell me where i am going wrong...
I have a data type DT_FILE for writing to the file.
I have interfaces:
si_oa_iorder(outbound asynchronous interface for file)
si_aa_iorder(abstract asynchronous interface for idoc)
si_aa_file( abstract asynchronous interface for file)
si_ia_file (inbound asynchronous interface for file)
I have message mapping MM_IORDER2FILE mapping IDoc to flat file structure
I have operation mapping OM_IORDER2FILE where I have mapped si_aa_iorder and si_aa_file
(( Is this right? are both abstract interfaces to be mapped? or do i need to create more mappings like si_oa_iorder to si_aa_iorder etc? please clarify...))
My IP is very simple with just a 'recv step' having container element of type si_aa_iorder and 'send step' having container element of type si_aa_file to start with..i haven't yet put the switch control etc...even such simple IP fails....
I have created Configuration objects like
Business System for file receiver
Business component for Idoc sender with adapter specific details set
Communication channels for Idoc and file adapters
No sender agreement as it is Idoc communication
Receiver agreement between the Integration Process(IP_IORDER2FILE) and the file server
2 Receiver determinations between BC_idoc_send to IP and other from IP to FileRecv system
2 interface determinations , one from si_oa_iorder of BC_idoc_send to IP and other from si_aa_file of IP to file recv system.
This is my setup and this fails....
My question is..is my message mapping and operation mappings correct? and can u see any obvious blunders i am doing?
please bear in mind that with same interfaces and sending and recv components, it runs fine without BPM....so please look at the BPM bit of mappings/config that i might have missed and please advice asap..
Thanks in advance and i am sure there would be lot of gurus for whome it is just a peanut...so please reply...
Regards
Jhansi

Firstly, you said you are not using any Switch, then how are you specifying the condition ?
Secondly, your interface is not dependent on the BPM, its dependent on the configuration. BPM is a representation on how the interface works in step-by-step manner.
So, while checking the condition order type = 'PM01', you must be using the Switch, i believe, which has to options Branch1 and Branch Oherwise. Branch1 means when the condition is TRUE and BranchOtherwise is when condition is FALSE.
If you can let me know the condition statement that you have given in the Switch, I can try to tell you more.
-Sid

IDOC- BPM- File - Acknowledgements

The Scenario is to send IDocs from SAP through BPM to a file system. I want an acknowledgement to be sent back to SAP system incase of any error while writing the file. To simulate an error, I am giving an unauthorized file path. I have enabled application acknowledgements in the send step of BPM. I receive a negative acknowledgment from the File system to BPM saying unauthorized. But the acknowledgement from BPM to SAP system has the status 'Waiting for an acknowledgement' and the status of IDOC in SAP is still '03'.
Please note that in case of successful message, the acknowledgement is sent all the way back to SAP and the status of IDOC is set to '41' from '03'.

Vinoda, Are you sure the file system is sending you an Application acknowledgement ? To receieve an application acknowledgement in your send step, the receiver Business System should be capable of sending an acknowledgement back, i doubt whether a file system is capable of doing it, unless you have designed a clever mechanism of doing this. was just curious...
Thanks
Saravana

IDOC to file....bpm or without bpm...help needed..

Hi XI friends,
its IDOC to file Scenario..
its daily scheduling report..if we run that report.....Number IDOCs are generated in SAP..
we have 5 legacy systems..
for one legacy systems file type is .txt file and for remaining xml files..
the catagarization based on one of the field in IDOC..
if that field is 01 the file type should be .txt file
for others xml file..
if that field is 01 then ..XI need to collect all the IDOCS into one .txt file for other values direct conversion into XML file i.e..each idoc gets into one xml file
if that filed is 01..then XI need to collect all the IDOCs in that day into single .txt file and the fileds are Fixed lenghts...and at the same time ..that idoc contains number of segments ..if any Idocs doesnt contain some segments..ther should be no more blank lines...each segment should placed in new row...and also..for some segements ..XI should collect into seperate .txt file....
please help me....how to achive,,,,,,
regards
Munna

<i>if that field is 01 then ..XI need to collect all the IDOCS into one .txt file for other values direct conversion into XML file i.e..each idoc gets into one xml file
if that filed is 01..then XI need to collect all the IDOCs in that day into single .txt file and the fileds are Fixed lenghts...and at the same time ..that idoc contains number of segments ..if any Idocs doesnt contain some segments..ther should be no more blank lines...each segment should placed in new row...and also..for some segements ..XI should collect into seperate .txt file....</i>
in this case BPM will be required to collect the IDOCs ref: http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
base the correlation on the field that contains the value 01
also then later using XPATH in your receiver det. you can check for the value and route the message to the particular receiver as u want to
ref:
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers

Multiple IDocs to File using BPM

Hi All,
I have configured a scenario of multiple IDocs to file using BPM. In this scenario while I am triggering IDoc from R/3 system it is sent to the external program. I am getting in the status record of WE05 as IDoc is sent to an external system with status code 03. But I am unable to view the same message in moni of the XI system.
Also I have checked the ALE settings on both the sender and receiver side and it is fine.
Also in SM58 nothing is there in queue.
Can anyone solve this issue of mine?
Cheers,
Neethu.

Hi,
in many cases it's a problem with the RFC connection. You should try an authorization test in SM59 of the R/3 system.
This might also be useful:
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Patrick

IDOC --BPM--IDOC AND FILE

Hi Experts,
My scenario is idoc to idoc and file through BPM.
so I hve one integration process and 2 receiver.The prob is frm IP it is pointing to only file not to IDOC
1) 1 sender agreement
2) 3 receiver determination
3) 3 interface determination
please help me out..

Why are you using BPM for this?it is not good design.
If you want to still use bpm then
1)1 receive step,
2)2 transformations steps(if or are executing Operation mapping in IP).
3)2 send steps.
check your BPM design and monitor Integration process work flow.
Regards,
Raj

How to send 100 records from an IDOC to File Scenario without using BPM?

Hi All,
I have a requirement that i need to send 100 records from sap to file by using the scenario IDOC to File. Can you suggest how can i achieve this?
Regards,
Ramvilas.

Hi,
Create a H type RFC destination.Tagert host and port give Xi system host and port.Path give the
/sap/xi/adapter_plain?namespace=<NameSpcae>&interface=<Interface> &service=<SenderBusinessSystem>&qos=EO or EOIO.
Go to we21 find xmlhttp port.give the port name and assign RFC.Give the port in we20 your idoc and change to collective.
In Xi export the IDOC and change the occurance to 0-unbounded and import it.
Regards,
Prakasu.M

Why we dont need sender agreement and comm channel in IDOC to file scenario

Hi,
there are 2 queries:
first query :
Scenario is "Idoc to file transfer"
why we dont need sender agreement and communication channel for IDOC to file ,while we do need
both of these for "File to RFC "
Answer : which i got is because IDOC sits at ABAP stack but same is valid for RFC also.
Then why For "IDOC to file" we dont need that.
Second query:
Also when i did scenario for File1-RFC-File2 scenario using BPM i have created a interface
between XI-RFC synchronous to send data which we got from file1 in XI to RFC importing parameter
and getting data from RFC back to File2.
Here in IDOC to file scenario why we dont need any interfface for IDOC-XI Asynchronous.
Regards,
Mayank
Edited by: mayank verdia on Jan 13, 2009 11:49 AM
Edited by: mayank verdia on Jan 13, 2009 11:50 AM

Dear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

ALEAUD in IDOC to File Scenario

Hi,
I have a IDOC to file scenario in which im sending the PAYEXT IDOC from SAP to a bank as the IDOC-XML.
ie the user will create a payment in the SAP system , this shoud trigger an IDOC to XI. XI puts the IDOC-XML sturcture into a FTP folder path from which the bank will pick it up. Now the bank has to send an acknowledgement(asynchronously) that the payment was processed. And this response should be captured and returned to the user.
can we use ALEAUD as the acknowledgement or does using ALEAUD make no sense here?

Hi,
Assuming that the bank will send you a file to the FTP server you can simply pick up this file and mapi it to the Systat IDoc. I would assumt that the IDoc status's would not be in the file so you would have to do some value mapping or other logic to determine the IDoc status codes that you want.
The IDoc is very simple with few fields so the mapping should not be a problem.
Please note you do not use BPM for this scenario. In essence this would be a new flow of File --> PI --> IDoc
Import the STATUS.SYSTAT IDoc into the Design and play from there, you can make a POC now and test the functionality which would probably be best for you at this point.
Let me know if you need more details
Edited by: Alexander Ong on Jul 14, 2009 4:57 PM

Alerts when the acknowledgement fails in IDOC to File Scenario

Hi All,
could you let me know how to handle Alerts for Idoc to File scenario.
My Scenario uses BPM as well.
Thanks,
Srini

Dear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

Need an alert to be sent after succesful completion idoc to file scenario.

Hi ,
we have an idoc to file scenario, the user wants a email confirmation after the file is generated, can any body help how i can trigger an alert once file is generated by xi(in a idoc to file scenario).
regards
sandeep

Hi Sandeep,
we have an idoc to file scenario, the user wants a email confirmation after the file is generated, can any body help how i can trigger an alert once file is generated by xi(in a idoc to file scenario).
Well, you can generate an email after your file has been sent (use BPM for this).
But I believe your Client wants a confirmation of file delivery through email, which might be a problem. By using the above step, you will be able to send the email after file is sent, but it won't confirm whether the file has been successfully delivered.
You need a synch message which file won't be supporting. So, the other way is to ask your Client if it is possible for them to send an acknowledgment to PI after receiving the file, and then you can trigger the email.
Unfortunately, there is no straight way out for your problem.
Hope this helps.
Regards,
Neetesh

Mapping problem: IDOC - XI - File

Hi,
in my scenario (Z-IDOC - XI - File) I have problems with the mapping:
Z-IDOC :
ZFIBUCH1
_IDOC
___Begin
___EDI_DC40
___Z1L061 (0..999999999)
_____Z1L062 (0..999999999)
example
L061 18000 DE 0101 23236318 050605 EUR
__L062 18000 XXX XXX
__L062 18000 XX1 CCC3
L061 87000 DE 0101 050605 EUR
__L062 87000 XXX XXX
__L062 87000 XX1 XAA4
the result should look like this :
L061 18000 DE 0101 23236318 050605 EUR
L062 18000 XXX XXX
L062 18000 XX1 CCC3
L061 87000 DE 0101 050605 EUR
L062 87000 XXX XXX
L062 87000 XX1 XAA4
I tried the following (target)-data types in the mapping but nothing didnt work very well :
MT_ZIFUCH_FILE
__ row
_____L061
_______L062
or
MT_ZIFUCH_FILE
__ row
_____L061
_____L062
or
MT_ZIFUCH_FILE
_____L061
_____L062
Do I need here a BPM? Or should I use XSLT-Mapping??
Or knows somebody a easyer way?
Regards
Christoph

Hi,
As per my understanding to have a flat file struture you would require a flat structure at the target side.One similar to the second structure mentioned by you.
DT_Target
|_Header
|______L61.....segment (child of header)
|______L62.....segment (child of header)
Using the mapping we convert the idoc structure to flat structure and then use content conversion like this :
Recordset structure : L61,L62
L61.fieldSeparator = ,(for you this value should be space)
L62.fieldSeparator = ,
I have not been able to convert the Target hierarchial structure to a flat file via content conversion.
when i tried I got the values as
L61,1800,...EUR,L62,8700,......
Hope this helps,
Regards,
Sulakshana

IDOC- XI- file.txt

Hello everybody!
I have scenario as below.
IDOC->XI->file.txt
I must transfer my packing list from idoc to file txt. The file txt must have a lot of lines for several levels of packing.
I think to try to processing an IDOC message many times over.
How can I Make?
Or have you another idea?
Thanks a lot!

Hi Demetrio,
Please have a look at the below weblogs...i hope it will help you to solve ur requirement...
XI:Idoc Message Packages
/people/sravya.talanki2/blog/2005/12/09/xiidoc-message-packages
Collecting IDocs without using BPM
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
IDOCs (Multiple Types) Collection in BPM
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
Thanks,
Aravind.pujari

Problem IDOC to File scenario: No service for system SAPIDC, clnt in ID

in IDOC to File scenario, when IDOCis triggered from R/3 to XI, it gives error in SM58 transaction
"No service for system SAPIDC, client 800 in Integration Directory"

In a scenario, i have a BPM which has a transformation step which contains a mutimapping ...means 2 messages mapped to 1 messgaes, here in the mapping i m using an UDF and written code to extract the file name from dynamic configuration.....
the problem is ...the same BPM contains another transformation step which contains a message mapping (which is not multi mapping), and here the code (UDF) works to fetch the file name...
the code is all correct....and it looks like
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String sourceFileName = conf.get(key);
if (sourceFileName == null ){
sourceFileName = "ErrorFile.xml";}
return sourceFileName;

Idoc ---- BPM ------ file

Similar Messages

Maybe you are looking for