IDoc delta loads using the program RBDMIDOC
Hi ALL,
We are doing some delta loads for ALE-IDOC using the program RBDMIDOC and we are using the message type HRMD_A.Under this message type we have configured two diff distribution models with different infotype data.
So when we execute the program we have only one input parameter that takes the message type.based on our setup will the program send the delta loads for both the distribution models since they are using the same message type which we do not want.
How do we restrict the program to send the delta loads only for the intended distribution models even though they are using the same message type.
Thanks
Bala Duvvuri
Hi Bala,
Assuming that based on IDoc content there is some way to determine which system should be the recipient, you could do the following (requires ABAP development as indicated by Mylène):
Define a new filter object type if required via BD95.
Assign new or existing filter object to E1PLOGI segment field FILTER1 or FILTER2 via BD59
Create BAdI implementation for HRALE00OUTBOUND_IDOC and implement method FILTER_VALUES_SET to set values for FILTER1 or FILTER2
Even without the BAdI implementation you'd see the new filter value appearing in your distribution model for message type HRMD_A. However, you need the ABAP logic for filling the fields with actual values that you can utilize.
Cheers, harald
Similar Messages
-
Creation of Idocs from the change pointers by the program RBDMIDOC
Hello,
I'm Creating Idocs from the change pointers by the program RBDMIDOC.
The IDOCS Created using the message type HRMD_A are Correct but when i try to RUN RBDMIDOC for message type HRMD_B no Data is selected for distribution.
All the customizing are similar and i presume that all the change pointers are active (BD50 and IMG->Personnel Management -> Organizational Management -> Basic Settings -> Activate change documents).
Can anyone help me with the necessary steps to create this IDOC types.
Do anyone know if the RBDMIDOC report is the Same for messages HRMD_A and HRMD_B.
Thanks in Advance,
Pedro FerreiraIf the setting is fine, there may be some code in exit or badi for program RBMIDOC. Check the Exit and BADI.
check the exit EXIT_SAPLBD11_001 and
check the badi IDOC_CREATION_CHECK.
Probably there may be some code on these exits which are stoping your code from getting generated.These are the two trigger happen once u execute the RBMIDOC program.for HR, we use RHALEINI program to generate the idoc. but even RBDMIDOC works. These 2 triggere will come with RHALEINI also.
If there is no code here, Then there is problem in the setting only. -
Hi Gurus:
Currently my company uses 0FI_AP_3 for some A/P reporting. It has been heavily customized & uses Delta loading. However, SAP recommends the use of "0FI_AP_4" for A/P data fro delta loads. I was able to Activate 0FI_AP_4 as well & do some Full Loads in Dev/Test boxes. Question is whether I can use both the extractors for "Delta" loads at the same time......? If there are any issue, what is the issue and how ccan I resolve it? Is the use of only one extractor recommended......??
Please let me know as this impacts a lot of my development....! Thanks....
Best...... ShruMaa
PS: I had posted this in "BI Extractors" forum but there has been no response...... Hope to get some response.......! ThanksHi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer -
after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?
Not sure of an answer to your basic question, but it may be that you can run a repair (on Windows --> Control Panel>Programs & Features and run the repair on Acrobat). If that fixes the issue, at least temporarily, at least you will not be reinstalling everything -- a real pain.
Next, open Acrobat and go to the Help to run the updates and be sure you are current. On some OSs, the updates are critical. -
ALE Delta is used for all Master data delta extracts and referencing change pointer tables
IDOC Delta Loads are used for transactional delta and access source system queues
Are the above statements correct? ThanksNitesh
As you know there are two types of Transfer Methods (PSA & IDOC). Info Idoc are used for both the types of Transfer Methods. Only ALE is used to transfer InfoIDocs.
The Transfer Method only determine how the data is transfered.
IN PSA Transfer Method Trfc is used to transfer data directly from Source system to BW.
Thanks
Sat -
What do I have to do to bring iPhoto up so that I can use the program?
This morning we received a software update for iPhoto (36MB) immediately after this download and installation we received a second software update for iPhoto (57.7MB). Shortly after finishing the second update I tried to open iPhoto to work on a slideshow of holiday activities.
I went to:
Dock > iPhoto
Message: " The photo library needs to be upgraded to work with this version of iPhoto."
upgrade ( I clicked on the upgrade button)
"Loading photos... " " Examining Photo Library "
Everything stopped.
New screen: " There is a problem accessing one or more files in your iPhoto Library folder. >Finder, >iPhoto Library, >get info., ... check read/write permissions."
I proceeded as directed. Permissions were all read/write for the iPhoto Library folder.
I went back to iPhoto... repeat of problem.
What do I have to do to bring iPhoto up so that I can use the program.Welcome to the Apple Discussions. What was updated and did you repair disk permissions after it was completed?
As a first fix attempt download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administartive name in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
Error when executing the program RBDMIDOC with Message type HRMD_ABA
Hello All
I finished the integration between CRM and HR
Now I am able to replicate the employees and the organizations, but when I created a schedule job for the program RBDMIDOC and message type HRMD_ABA the system gives me warning and message: no data selected for distribution even if I try to run the program using SE38 I am getting the same error message
I already activated the message type using BD50 and activated the Change pointers using BD61
Regards
Jacopo Fransoiceus the program
RHALEINI -
Downloaded my hierarchy using the program z_sap_hierarchy_download
hi
I want download downloaded my hierarchy using the program z_sap_hierarchy_download but I have any problem when I using idoc method, I have this message:
Node [00001350, 00001580]: Leaf 'E010000000' already exists as child of node 00001501
Best regard
Francoisehi
The problem is that 2 id differents has the same description.
my program is:
begin
SAP Consulting BW Tools:
Download hierarchy into a flat file. The file has the correct format
Text elements:
P_DATES Include from/to dates
P_DATETO Valid-to date
P_FNAME File name
P_HIENM Hierarchy name
P_INTER Include from/to leaves
P_IOBJNM InfoObject
P_LANGU Language
P_VERS Hierarchy version
REPORT z_sap_hierarchy_download.
TYPE-POOLS: rs, rsdm, rrh1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS:
p_iobjnm TYPE rsdiobjnm MEMORY ID rsc.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS:
p_hienm TYPE rshiedir-hienm,
p_vers TYPE rshiedir-version,
p_dateto TYPE rshiedir-dateto,
p_langu TYPE rshiedirt-langu.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME.
PARAMETERS:
p_fname LIKE rlgrap-filename,
p_dates AS CHECKBOX DEFAULT 'X',
p_inter AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b3.
File structure
TYPES:
No dates/intervals
BEGIN OF y_s_hierfile_1,
nodeid TYPE rshienodid,
iobjnm TYPE rsiobjnm,
nodename TYPE rsnodename,
tlevel TYPE rstlevel,
link TYPE rslink,
parentid TYPE rsparent,
childid TYPE rschild,
nextid TYPE rsnext,
langu TYPE langu,
txtsh TYPE rstxtsh,
txtmd TYPE rstxtmd,
txtlg TYPE rstxtlg,
END OF y_s_hierfile_1,
y_t_hierfile_1 TYPE STANDARD TABLE OF y_s_hierfile_1,
With dates
BEGIN OF y_s_hierfile_2,
nodeid TYPE rshienodid,
iobjnm TYPE rsiobjnm,
nodename TYPE rsnodename,
tlevel TYPE rstlevel,
link TYPE rslink,
parentid TYPE rsparent,
childid TYPE rschild,
nextid TYPE rsnext,
dateto TYPE rsdateto,
datefrom TYPE rsdatefrom,
langu TYPE langu,
txtsh TYPE rstxtsh,
txtmd TYPE rstxtmd,
txtlg TYPE rstxtlg,
END OF y_s_hierfile_2,
y_t_hierfile_2 TYPE STANDARD TABLE OF y_s_hierfile_2,
With intervals
BEGIN OF y_s_hierfile_3,
nodeid TYPE rshienodid,
iobjnm TYPE rsiobjnm,
nodename TYPE rsnodename,
tlevel TYPE rstlevel,
link TYPE rslink,
parentid TYPE rsparent,
childid TYPE rschild,
nextid TYPE rsnext,
leafto TYPE rsleafto,
leaffrom TYPE rsleaffrom,
langu TYPE langu,
txtsh TYPE rstxtsh,
txtmd TYPE rstxtmd,
txtlg TYPE rstxtlg,
END OF y_s_hierfile_3,
y_t_hierfile_3 TYPE STANDARD TABLE OF y_s_hierfile_3,
With dates/intervals
BEGIN OF y_s_hierfile_4,
nodeid TYPE rshienodid,
iobjnm TYPE rsiobjnm,
nodename TYPE rsnodename,
tlevel TYPE rstlevel,
link TYPE rslink,
parentid TYPE rsparent,
childid TYPE rschild,
nextid TYPE rsnext,
dateto TYPE rsdateto,
datefrom TYPE rsdatefrom,
leafto TYPE rsleafto,
leaffrom TYPE rsleaffrom,
langu TYPE langu,
txtsh TYPE rstxtsh,
txtmd TYPE rstxtmd,
txtlg TYPE rstxtlg,END OF y_s_hierfile_4,
y_t_hierfile_4 TYPE STANDARD TABLE OF y_s_hierfile_4.
Hierarchy definition
DATA:
g_s_hiesel TYPE rsndi_s_hiesel,
g_s_hiedir TYPE rsndi_s_hiedir,
g_subrc TYPE sy-subrc,
g_t_hiedirt TYPE TABLE OF rshiedirt,
g_s_hierstruc TYPE rssh_s_htab,
g_t_hierstruc TYPE TABLE OF rssh_s_htab,
g_s_thiernode TYPE rsthiernode,
g_t_thiernode TYPE TABLE OF rsthiernode WITH KEY langu hieid objvers
nodename,
g_s_hierintvl TYPE rssh_s_jtab,
g_t_hierintvl TYPE TABLE OF rssh_s_jtab WITH KEY hieid objvers nodeid,
g_s_message TYPE rsndi_s_message,
g_t_message TYPE TABLE OF rsndi_s_message,
g_s_chavlinfo TYPE rsdm_s_chavlinfo,
g_t_chavlinfo TYPE rsdm_t_chavlinfo.
File
DATA:
g_fname TYPE string,
g_struct_s TYPE string,
g_struct_t TYPE string,
gr_s_file TYPE REF TO data,
gr_t_file TYPE REF TO data.
FIELD-SYMBOLS:
<g_langu> TYPE ANY,
<g_s_file> TYPE ANY,
<g_t_file> TYPE STANDARD TABLE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_iobjnm.
CALL FUNCTION 'RSD_IOBJ_F4'
EXPORTING
i_show_cha = rs_c_true
i_objvers = rs_c_objvers-active
i_hietabfl = rs_c_true
CHANGING
c_iobjnm = p_iobjnm
EXCEPTIONS
illegal_input = 1.
CHECK sy-subrc = 0.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_hienm.
DATA:
l_s_hiertxt TYPE rrh1_s_hiertxt,
l_t_hiertxt TYPE rrh1_t_hiertxt.
CALL FUNCTION 'RRH1_HIERARCHY_HELP_VALUES_GET'
EXPORTING
i_iobjnm = p_iobjnm
i_dateto = p_dateto
i_hienm = p_hienm
i_version = p_vers
IMPORTING
e_t_hiertxt = l_t_hiertxt
EXCEPTIONS
no_f4_available = 1
dialogue_canceled = 2
OTHERS = 3.
CHECK sy-subrc = 0.
READ TABLE l_t_hiertxt INTO l_s_hiertxt INDEX 1.
CHECK NOT l_s_hiertxt IS INITIAL.
p_hienm = l_s_hiertxt-hienm.
DATA:
l_s_dynpfields TYPE dynpread,
l_t_dynpfields TYPE STANDARD TABLE OF dynpread.
CLEAR: l_t_dynpfields, l_s_dynpfields.
l_s_dynpfields-fieldname = 'P_VERS'.
WRITE l_s_hiertxt-version TO l_s_dynpfields-fieldvalue.
APPEND l_s_dynpfields TO l_t_dynpfields.
l_s_dynpfields-fieldname = 'P_DATETO'.
WRITE l_s_hiertxt-dateto TO l_s_dynpfields-fieldvalue.
APPEND l_s_dynpfields TO l_t_dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
TABLES
dynpfields = l_t_dynpfields.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
DATA:
l_filename1 TYPE string,
l_filename2 TYPE string,
l_path TYPE string,
l_fullpath TYPE string,
l_action TYPE i.
l_filename1 = p_fname.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
window_title = 'Select Download File'
default_extension = 'txt'
default_file_name = l_filename1
file_filter = 'All Files (.)|.|Text files (.txt)|.txt'
CHANGING
filename = l_filename2
path = l_path
fullpath = l_fullpath
user_action = l_action
EXCEPTIONS
cntl_error = 1
OTHERS = 2. "#EC NOTEXT
CHECK sy-subrc = 0.
CALL METHOD cl_gui_cfw=>flush.
IF l_action = 0.
p_fname = l_fullpath.
ENDIF.
INITIALIZATION.
GET PARAMETER ID 'RSC' FIELD p_iobjnm.
START-OF-SELECTION.
Check input
CHECK NOT p_fname IS INITIAL.
IF p_langu IS INITIAL.
p_langu = sy-langu.
ENDIF.
IF p_dateto IS INITIAL.
p_dateto = '99991231'.
ENDIF.
Read hierarchy
CLEAR g_s_hiesel.
g_s_hiesel-objvers = rs_c_objvers-active.
g_s_hiesel-hienm = p_hienm.
g_s_hiesel-version = p_vers.
g_s_hiesel-iobjnm = p_iobjnm.
g_s_hiesel-dateto = p_dateto.
CALL FUNCTION 'RSNDI_SHIE_STRUCTURE_GET'
EXPORTING
i_s_hiesel = g_s_hiesel
i_no_nodenm_table = rs_c_true
IMPORTING
e_s_hiedir = g_s_hiedir
e_subrc = g_subrc
TABLES
e_t_hiedirt = g_t_hiedirt
e_t_hierstruc = g_t_hierstruc
e_t_thiernode = g_t_thiernode
e_t_hierintvl = g_t_hierintvl
e_t_message = g_t_message.
IF g_subrc <> 0.
READ TABLE g_t_message INTO g_s_message INDEX 1.
IF sy-subrc = 0.
MESSAGE ID g_s_message-msgid TYPE 'I' NUMBER g_s_message-msgno
WITH g_s_message-msgv1 g_s_message-msgv2
g_s_message-msgv3 g_s_message-msgv4.
ELSE.
MESSAGE ID 'RSBO' TYPE 'I' NUMBER 899
WITH 'Hierarchy read error'.
ENDIF.
EXIT.
ENDIF.
Defined output structures
IF p_dates IS INITIAL AND p_inter IS INITIAL.
g_struct_s = 'Y_S_HIERFILE_1'.
g_struct_t = 'Y_T_HIERFILE_1'.
ELSEIF p_dates = 'X' AND p_inter IS INITIAL.
g_struct_s = 'Y_S_HIERFILE_2'.
g_struct_t = 'Y_T_HIERFILE_2'.
ELSEIF p_dates IS INITIAL AND p_inter = 'X'.
g_struct_s = 'Y_S_HIERFILE_3'.
g_struct_t = 'Y_T_HIERFILE_3'.
ELSE.
g_struct_s = 'Y_S_HIERFILE_4'.
g_struct_t = 'Y_T_HIERFILE_4'.
ENDIF.
CREATE DATA gr_s_file TYPE (g_struct_s).
ASSIGN gr_s_file->* TO <g_s_file>.
CREATE DATA gr_t_file TYPE (g_struct_t).
ASSIGN gr_t_file->* TO <g_t_file>.
Nodes
REFRESH <g_t_file>.
LOOP AT g_t_hierstruc INTO g_s_hierstruc.
CLEAR <g_s_file>.
MOVE-CORRESPONDING g_s_hierstruc TO <g_s_file>.
Texts for nodes
READ TABLE g_t_thiernode INTO g_s_thiernode WITH TABLE KEY
langu = p_langu
hieid = g_s_hierstruc-hieid
objvers = rs_c_objvers-active
nodename = g_s_hierstruc-nodename.
IF sy-subrc = 0.
MOVE-CORRESPONDING g_s_thiernode TO <g_s_file>.
ELSE.
Texts for characteristic values
REFRESH g_t_chavlinfo.
CLEAR g_s_chavlinfo.
g_s_chavlinfo-c_chavl = g_s_hierstruc-nodename.
APPEND g_s_chavlinfo TO g_t_chavlinfo.
CALL FUNCTION 'RSD_CHAVL_READ_ALL'
EXPORTING
i_iobjnm = g_s_hierstruc-iobjnm
i_langu = p_langu
i_dateto = p_dateto
i_check_value = space
i_sid_in = space
i_hieid = g_s_hiedir-hieid
i_objvers = g_s_hiedir-objvers
CHANGING
c_t_chavlinfo = g_t_chavlinfo
EXCEPTIONS
info_object_not_found = 1
routines_generation_error = 2
check_table_not_existing = 3
text_table_not_existing = 4
OTHERS = 5.
IF sy-subrc = 0.
READ TABLE g_t_chavlinfo INTO g_s_chavlinfo INDEX 1.
IF sy-subrc = 0.
MOVE-CORRESPONDING g_s_chavlinfo-e_chatexts TO <g_s_file>.
ASSIGN COMPONENT 'LANGU' OF STRUCTURE <g_s_file> TO <g_langu>.
IF sy-subrc = 0.
<g_langu> = p_langu.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
Intervals
IF g_s_hierstruc-intervl = 'X' AND p_inter = 'X'.
READ TABLE g_t_hierintvl INTO g_s_hierintvl WITH TABLE KEY
hieid = g_s_hierstruc-hieid
objvers = rs_c_objvers-active
nodeid = g_s_hierstruc-nodeid.
IF sy-subrc = 0.
MOVE-CORRESPONDING g_s_hierintvl TO <g_s_file>.
ENDIF.
ENDIF.
APPEND <g_s_file> TO <g_t_file>.
ENDLOOP.
Download output table
g_fname = p_fname.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = g_fname
write_field_separator = space
TABLES
data_tab = <g_t_file>
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc = 0.
MESSAGE ID 'RSBO' TYPE 'I' NUMBER 899
WITH 'Hierarchy download successful!'.
ELSE.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
end -
Can you use the programs in the creative cloud on multiple computers?
Hey,
I was wondering if it is possible to use the programs on multiple computers when you have the membership?
ThanksFrom the doc : http://www.adobe.com/products/creativecloud/faq.html
"You can install the desktop applications available in Creative Cloud on your primary computer and one backup computer, as long as they are not running at the same time. You will have access to both the Mac OS and Windows versions, so if you have a Mac at home and a PC at work, for instance, you can install your applications on both. See the product license agreements page for more information." -
Error while executing the program 'RBDMIDOC'
Hi Experts,
While executing the program RBDMIDOC
I am getting the following errors
One error in Communication data :
1) No data distributed because of conversion errors
Two errors in Data selection and formatting :
1) No ISO code found for the country key NT in the field NATIO
2) Conversion error: infotype 0002, object 01,P,00000033
I am having change pointer entries in BDCP table.
Can anyone please tell me how to resolve these errors....
Thanks in advance...us the program
RHALEINI -
If I am buying single app adobe premier pro by annual prepaid plan,after the after the end of the year subscription would it be possible to use the program further without updating or I should pay each year?
Thanks
2 бер. 2015 15:50, користувач "Peru Bob" <[email protected]> написав:
If I am buying single app adobe premier pro by annual prepaid
plan,after the after the end of the year subscription would it be possible
to use the program further without updating or I should pay each year?
created by Peru Bob <https://forums.adobe.com/people/Peru+Bob> in *Premiere
Pro* - View the full discussion
<https://forums.adobe.com/message/7243337#7243337> -
F-43 and F-22 tcode will work by using the program RFBIBL00 in LSMW?
Hi Guys,
Currently we have the requirement like we need to post the vendor open items and customer open items by using the tcodes
F-43 and F-22.
Is it possible to create the records by using the program RFBIBL00 in LSMW?
Thanks in advance
SRS ReddyDear Reddy,
FB01 is the generic and classic transaction to post an FI document. There is no difference at all with F-43 and F-22 that are only linked to a specific document type and posting key.
I hope this helps You.
mauri -
How to use the program "Generate test data for BAI bank statement" ?
Hi all,
I use the program RFEBKAT5 to create an Electronic Bank Statement file in BAI format ,but it doesn't generate the file .
I don't know how to generate the file.
Please help me !
Thanks all !You need to suitably adjust your GL accounts for "Posting Offset Account" (Whisch is defaulted as ++++++++19" and Checkout/Funds Out/Funds IN GL accounts to your configuration.
Once you do this try generating the file again. -
when i first inst Photoshop cs6 i was able to see the 3D icon, but on the next time i used the program there is no more 3D icon. when i launch Photoshop it say " Photoshop detected graphic hardware is not officially supported if you experience problem please unchecked the use graphic processor check box in the performance panel of the preference dialog" Is this the cause? If so how to uncheck that box? Thanks
Your video card is underpowered for the task.
Go to Photoshop > Preferences > Performance and click on the tick mark next to the box labeled "Use Graphics Processor": -
I have CS 6 which requests I sign in to access my serial numbers, which I have already, and it fails to connect so that I cannot use the programs. How do I get past this, is there a direct line to customer support in the UK?
ThanksSign in, activation, or connection errors | CS5.5 and later
Mylenium
Maybe you are looking for
-
Help needed in JSP application
Hi... I am implementing one web application. The main file is index.html whch contain frame where following options are there. 1. Login 2. Line Count. 3. Leave Balance 4. Extra. 5. Log out. but wht I want is, Once User logged in the options from 2to
-
Can I get iPhone 5 unlocked and contract-free?
Can I get iPhone 5 unlocked and contract-free? i live in India and iphone 5 is not yet available in india so i would like to buy it from USA. Please help
-
Multiple Filtering options within ALV Output.
Hi All, Being a Functional Guy,I would like to clarify few questions in ALV functionality. In one of our requirement we need to create a ALV report. Step1 : Enter values in selection criteria. Step2: Execute ALV report. Step3: Within Output I should
-
Certified LabVIEW Architect and Professional Instructor willing to relocate
I have been working for an NI Integrator for about 3.5 years and interested in seeing if I could be of value elsewhere. I like to travel, have no real roots and could move internationally if necessary. LabVIEW (6i to 8.5) including: FPGA,
-
I dropped m iphone 5c in the toilet!!!
I dropped my not even one month old iphone 5c in the toilet and the screen, home, and power buttons are unresponsive. I already put it in a bowl with dried rice. If that doesnt work, how much would it cost to replace it?