IDOC Error - Copy Sender from Payload: Sender Is Missing in Payload

Hi,
I have following scenario.
SOAP adapter ---> PI -
> IDOC Receiver -
> ECC
THe IDOC has a required node that is disabled and IDOC revicer communication channel has checkd following options.
Apply control record value from pay load
Take Sender from Payload
The soap message is mapped to IDOC structure. While testing I received following error.
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Copy Sender from Payload: Sender Is Missing in Payload</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error: Copy Sender from Payload: Sender Is Missing in Payload</SAP:Stack>
If you have seen similar error and please let me know how to trobleshoot. I appreciate your help.
Thank you,
Balaji

Thank you for the response. I can enable EDI_DC40 segment and map required following values.
·        SNDPRN
·        SNDPRT
·        SNDPFC
·        RCVPRN
·        RCVPRT
However as we move transports to different environemnts the above values changes and I can't hard code in the mapping.
My questions is how can I map these values such that when transport moves across different environemtns the mapping valaues are still good. Please let me know.
Dont enable EDI_DC40 and dont select take sender ,receiver from pay load option,apply control record values from pay load.
this case IDoc adapter reads values from configuration time andno problem after trasporting to quality or prod.
Regards,
Raj

Similar Messages

Error copying data from Goods Receipt PO to A/P Invoice

Hi all, this seems like it should be a simple process. We get an error doing the following:
- Open a blank A/P Invoice
- Select the Vendor
- Copy from Goods Receipt PO
- Choose the items
- Draw Document Wizard 'finish'
The process aborts, and the system message that comes up is:
'Business partner of copied down payment document must be the same as business partner of target document'
Why is it saying this when it is the system that is choosing and presenting the items on the Goods Receipt PO that are associated with the Vendor??
BTW: version 8.8 running on MS SQL Server 2008

Yes, the message is clear, but the logic is not.
A blank A/P invoice is opened, and the business partner (Vendor) is selected. When the 'copy from' Goods Receipt PO is selected, a list of POs is displayed that are associated with the vendor. This info should then be copied back - there is no ability to select a differend business partner, and it is SAP that is making the association between the data. This is what is confusing. If A/P Down Payment Invoice is selected for this process (rather than the A/P Invoice), the system copies that data across with no error message.
Note: This is only a new system and the users are getting used to the SAP way of doing things. Could it be that they should be carrying out the workflow in a different way?
Cheers,
Nick

Error copying files from flash drive

I'm not entirely sure this is a Windows compatibility problem, but it seems plausible. We have an external USB drive that is used to carry files back and forth between home, where we have a MacBook, and my husband's job, where he has a Windows machine. He has had a problem on several occasions copying files between the external drive and the hard drive. If he copies an entire folder, the copy will sometimes throw an error and then abort the copy process. This then results in anything that previously existed in the target folder and didn't get copied being completely wiped out (instead of them just being left there).
I was able to replicate this behavior for the local copy of the files that are now on our hard drive, just trying to copy to another folder on the hard drive. The error message I saw was a "File in Use" error on a file that was definitely not open in any application, and then the aborted copy process (and the complete erasure of any files that previously were there). It was intermittent: I had a successful copy-and-paste of the folder once, and another that displayed the error behavior.
Other info:
I can copy using "cp -r" on the command line, this only happens with the Finder.
The file that I saw the "File in Use" error on has an extended attribute set (I noticed this due to the "@" sign at the end of the permissions). When I look at it, it is a com.apple.FinderInfo attribute but I don't know what the values/fields mean.
The files all show the username & group name from the Windows system my husband uses at work (we haven't set any groups at home -- the files show "staff" as the group so I presume this is from the Windows system).
Some of the files were originally created on the Windows machine, others originally on the Mac machine.
The external hard drive is formatted as MS-DOS (FAT32).
I'm thinking there is some permissions issue between the Mac attributes and the Windows attributes that is causing the copy to fail (ungracefully) but that's a theory and I don't know how to fix it. Thanks for the help.

I never did figure out why the files wouldn't copy over. Eventually, I deleted them and reformatted the drive. I don't know if that "fixed" anything, and I have not tried to copy such large files from the Mac to drive or vice-versa, but the drive seems to be fine. So, the problem and the solution remain a mystery!

Lucreate "failure" - error copy files from zone root

I am using Live Upgrade to take a Solaris 10 8/07 server to Solaris 10 10/08. All the pre-req patches have been applied. When running lucreate, I get some grief about failing to copy some files. Otherwise lucreate seems to work fine.
Copying.
Creating shared file system mount points.
Copying root of zone <dmgrdv01>.
Copying root of zone <wasdv01>.
Copying root of zone <webdv01>.
Copying root of zone <waspl01>.
Copying root of zone <dmgrpl01>.
Copying root of zone <webpl01>.
Copying root of zone <tst01>.
Copying root of zone <tst02>.
Copying root of zone <tst03>.
Copying root of zone <sjsdv01>.
ERROR: Zone <sjsdv01> in BE <sol10_807>: cannot copy root
See </tmp/.lucopy.cpio_err.28752.sjsdv01> for details.
Copying root of zone <empdev01>.
.sjsdv01 is a whole root zone hosting an installation of the Sun Java System Directory Server and Application Server. Here is the error log file:
# cat /tmp/.lucopy.cpio_err.28752.sjsdv01
cpio: Cannot open "./root/var/opt/mps/serverroot/admin-serv/tmp/iwswatchdog.3837", skipped, errno 122, Operation not supported on transport endpoint
cpio: Cannot open "./root/var/opt/mps/serverroot/admin-serv/tmp/iwswatchdog.15973", skipped, errno 122, Operation not supported on transport endpoint
cpio: Cannot open "./root/var/opt/mps/serverroot/admin-serv/tmp/iwsadmin.3838", skipped, errno 122, Operation not supported on transport endpoint
cpio: Cannot open "./root/var/opt/mps/serverroot/admin-serv/tmp/iwsadmin.15974", skipped, errno 122, Operation not supported on transport endpoint
12835872 blocks
4 error(s)
#Am I correct in assuming that this means the zone was successfully copied except these four files?
Thanks,
Mark

The files are pure plain text ?Yes, although I have also tried with various other files which were around - MS Word, PDF.
Do all files fail or just specific files...As far as I can see, all files of the right size.
I am aware of one other outstanding Windows specific
bug, 3703236, which leads to file size truncation.
I've only seen this with Binary documents such as
PDF, ZIP, JPEG, and it is typically only seen with
files over 1MB in size, and typically results in
files that are between 100K and 300K remaining.
Are you running this test on with the database
running on Windows ?, is so what is the server
platform ?.Server 2000, and XP Pro.
What is the size of the file(s) you are
uploading, and what size are they after the upload ?Everything from 1k to 1m, going up in powers of 2. The latest test, with 9.2.0.7 and an updated Windows MSDAIPP.DLL files start to fail at 64K. The failed transferred files are usually around 40K, but the size varies.
>
Do you have proxy servers etc configured in your
Internet Explorer ? Can you disable them and try
again...
Yes. No difference.
Can you open a tar with Oracle Support, upload the
document(s) that are failing, and post the tar number
here.
Tar is 5004416.993
See also
Excel output truncated (255 chars only) - Workaround?
44573&tstart=50

IDoc error handling via WorkFlow. What is missing?

Hi All,
My problem is when an error occured I don't receive anything in the Workplace.
I did the following:
When I created the process code I gave an object type(based on IDOCAPPL) for the function module's IDoc part. For the start event I gave the INPUTERROROCCURED event and for the end event the INPUTFINISHED.
I created a standard task where the triggering event is the object type->inputerroroccured and the terminating event is object type->inputfinished and the object method is the object type->inputforeground. I use a standard role with a "Z" function module to determine the agent.
I tested the role with an IDoc number and it worked. It gave me back a position where is my userid is the only id. The concistency check shows me 2 red line: the missing IDoc Packet section (I think it's not needed) and at the Role assignment (I think it's good so I don't understand this).
So, Do you have any idea what is wrong?
Thanks for your help in advance.
Regards,
Gyula

Hi Gyula
Can you tell how you are actually raising that event .?
I assume that you have created a process code and attached it to some function module and therein wherever you are getting error(when you want to trigger workflow) you are raising an event for your object type and its event .
Since i cant check out your code , it guess you can try setting your task as General Task first to just get sure whether the event linkage is active for event or not and your workflow if at all is really getting triggered or not . If these things work fine with out then certainly your role determination function module needs to be checked.
Kind Regards
Shovit

Unable to send from Aliases

In addition to my main me.com email address I have two aliases which WERE listed in the From: drop down menu. I would write my email and select the right address to send from and send the email.
Today I set up another alias and followed the instructions. Before clicking on the '+' sign to add an address I noticed that only the main email address was listed and not the two aliases I have. I carried on with the process - clicked on the '+' sign, filled in the details and then clicked on 'Done'. When I tried to use Mail to send an email the new alias was listed but the other two had now disappeared. I can receive email using these addresses but not send. Any ideas?

it seems it works only on iCloud.com but not when using the Mail program on my MacPro. It just can´t be right that this happens, and it can´t be so hard to fix?

Error in SXMB_MONI as"Copy Sender from Payload: Sender Is Missing in Payloa

Hi Folks,
I am working on file to IDOC scenario. If I am testing in ESR and ID my interface is working fine. But when I am testing end to end I am getting below error. Please find the below error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Copy Sender from Payload: Sender Is Missing in Payload</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error: Copy Sender from Payload: Sender Is Missing in Payload</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can u ppl please suggest me how to resolve this error.Ur help is highly appreciated.
Thanks,
Swathi

You need to have a S-userid for that....check with senior members within your company....they would be having this S-userid
Some portion from the note:
You are using the Exchange Infrastructure and you use the IDoc adapter to send IDocs. A setting in the IDoc channel
defines that the IDoc sender agreement is to be determined from the payload. The payload is stored in the XI message in the
IDoc tunnel format. If the message has been created, for example, using a Business Process Engine (BPE) process, the IDoc
inbound property may no longer be available in the XI message. This results in the error described above.
TIll you get access to the SAP Note:
In mapping enable the EDI_DC40 segment in your IDOC...fill SEGMENT, SNDPOR, SNDPRT, SNDPRN ....map them as constant
then in IDOC channel check take Apply Control record from payload (or take sender from payload)
Regards,
Abhishek.
Edited by: abhishek salvi on Dec 24, 2010 4:51 PM

Error Copy Sender from Payload Sender is Missing in Payload

Hello,
we have a IDOC -> ccBPM -> IDOC scenario on PI7.0 SP12.
Since SP12, we have problems in sending the ALEAUD IDOCs from the ccBPM to the R/3 getting the LUW stucked in the queue showing the error "Copy Sender from Payload: Sender Is Missing in Payload".
In the XML for the ALEAUD the fields SNDPOR, SNDPRT and SNDPRN are filled correct and it has been working with older SP. The comm. channel is configured to take the sender from the payload and we really nead this as we send the IDOC from the ccBPM.
Does anyone has similar problems or knows about other restrictions which may cause this error?
Regards,
Dirk

Hello,
SAP solved the problem by releasing a patch.
If this problem also occurs on your machine then check the SAP note 1154710.
Regards,
Dirk

Error: Copy sender from payload: Sender not in payload

Hi all.
I generated a new WSDL with XI. when i posted it with XML Spy in SXI_MONITOR got this error:
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Copy sender from payload: Sender not in payload</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Copy sender from payload: Sender not in payload</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
WSDL could be wrong?
Rgds
RP

Hi,
it's not a WSLD error it's IDOC
have a look at my answer here:
Re: Error: Sender Not in Payload
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Use sender from payload: Sender not in payload

Hi,
I am currently facing problems with a IDoc -> XI -> Proxy(XI) sceanrio.
The Idoc is received by XI without any problems. No message mapping is required for this scenario. However, the message keeps getting stuck in the Inbound queue (SMQ2). The status text says "Use sender from payload: Sender not in payload".
Can anyone help me out on this?
Thanks,
Krishneel

Check this related problem:
ATTRIBUTE_IDOC_METADATA : Sender not in payload
Regards,
Abhishek.

How to send the PO IDOC error msg's to the concern users.

Dear Forum,
This is my requirement.
We are transferring sales order data from ECC 5.0 to ECC 6.0 through XI.And PO will be created in ECC 6.0 based on the sales order inputs.
When ever the SO data created in ECC 5.0.A sales Order IDOC will be generated and based on these details PO will be created in ECC6.0.Upto this level there is no problem and we have done this.
Source side : ORDRSP Idoc.
Target side : PORDRCP01 Idoc.
In addition to,If PO is not created in ECC 6.0.The suitable error msg will be reached to the concern user's mail ID's.
Please let me know to fulfill the pending task.
Thanks in anticipate.
Best Regards,
Naresh.K

Hi ,
Refer the Acknowledgments of Errors and Error Correction for Idocs.
http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/frameset.htm
If the sender is not an IDoc system, you can use the Send ALEAUD
for Partner as Request function in the Integration Server to convert
acknowledgment IDocs to XI request messages and send them
or
Refer this link:
http://www.erpgenie.com/sapgenie/docs/advanced_guide_to_edi_configuration.doc
refer section of the doc 2.3.4. Set-up IDoc administration: (WE46)
Regards,
Sunil.

IDOC: Status (Error/Success/information)report to Sender system

How would one send a message(error/success/information) to the sending(external) system to inform them of the statuses of the messages they've sent to our SAP system?

Hi Baumann,
you have an option called Audit reporting in which you can have the status of idoc at sender side.read the following.
Setting Up Audit Reporting
In the default behavior, after an IDoc is dispatched to a destination system, the sender does not know the state of the process on the destination system. You can configure the system, however, for cross-system reporting. You must model the ALEAUD message between the systems.
Two programs enable cross-system reporting.
1)RBDSTATE. This program is scheduled to run periodically on the destination system. It reports the status of incoming IDocs to the sending system, using the ALEAUD message and ALEAUD01 IDoc. This status information is recorded separately from IDoc status information in the audit logs.
2)RBDAUD01. This program is executed on the sending system. It analyzes the audit log and displays the output as a report.
The RBDSTATE program returns the following statuses, from the receiving to the sending system.
RBDSTATE Is Run on the Receiving System
Status of IDoc in receiving system     Status reported to sending system via ALEAUD
53 (Application document posted.)     41 (Application document created in receiving system.)
51 (Error: Application document not posted.)     Status 39 (IDoc is in the receiving system.) This status is repeated each time RBDSTATE is run, as long as the IDoc remains in status 51.
68 (Error: No further processing.)     40 (Application document not created in receiving system.)
reward points if helpful,

I cannot send email - error message as follows : 'The sender address (my email address) was rejected by the server smtp.tiscali.co.uk.' I can send email from other apple devices, and the email settings are identical. Any ideas?

For some reason I cannot send email - all was working fine, but now I get the following error message when I try to send email:
'The sender address (my email address) was rejected by the server smtp.tiscali.co.uk'
I can receive incoming mail ok and I can send email from other Apple devices. The problem seems confined to my Mac Book Pro.
Ant ideas?

Hello there, Pablo639.
The following Knowledge Base article offers up some great steps for troubleshooting mail issues on your Mac:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.
If a shortcut is used while Firefox is already open the error does not occur.

As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve

When I open Firefox 4 RC1 by clicking an external link (as from my desktop) I get an error: "there was a problem sending the command to the program"

A box with this error: "there was a problem sending the command to the program" always pops up upon clicking any URL sitting in my desktop (or from any other folder). It will not happen if Firefox is already open. However, it is only an annoyance as the page fully opens with no problem.
It started after I downloaded Firefox 4 beta ver 12. It continued after upgraded with RC1. It did not happen in my latest version of Firefox 3.6.x which I removed after installing 4 RC1

This has happened to me many times but on the older FF 3 It could be a small bug, One should list the PC's being used as it could be related? Mine is an E-Machine Mod, W3609 running W7.

IDOC Error - Copy Sender from Payload: Sender Is Missing in Payload

Similar Messages

Maybe you are looking for