IDoc (Outbound & Inbound) PO to ECC (2 clients)

Hi
As part of testing
I need to send outbound idocs from 2 separate clients in ECC to PO
Also I need to send inbound idocs to 2 separate clients of ECC from PO
With one client everything is working fine.
What extra steps need to be done for 2 clients, should we add entry in inboundRA ? Multirepository ?
Thanks in advance

Hi Mark,
Well if that is the case then I will suggest you to go with custom development.
Create Z tables for storing Inbound IDoc data in POS DM.
Write FM to process your inbound IDocs in POS DM Z tables.
Write FM to generate your outbound IDocs from POS DM Z tables.
Thanks,
Vikrant.

Similar Messages

Idoc outbound & inbound

Hi,
I have to extend Idoc , i have extended it by inserting new segments, but how i can handle outbound and inbound things like where i have to do coding.
san

Hi san,
below links might help you.
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/72/c18eff546a11d182cc0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/9c/2744f5fa7464429a13345be4050fb6/frameset.htm
http://www.sappoint.com/ppt/ale.ppt
below details might help you.
WE09 / WE02    IDoc lists according to content. View IDocs via specific IDoc number or business application detail contained within the contents of a segment.
WE05        View IDocs
WE19        EDI test tool. Use to test inbound Function module changes.
WE20        Partner profile configuration. Add partner detail together with inbound and outbound relationships. We also incorporate message control on the outbound IDocs. Utilize the organizational units to trap functional errors for further processing
WE30        Create IDoc extension type
WE31        Segment create
WE57        Assign function module to logical message and IDoc type
WE60        IDoc type documentation tool
WE82        Link Release detail to Extension IDoc Type
BD55         Conversion rule user exit. Link conversion rule user exit to the different system \ partner combinations
BD87         Reprocess IDocs in error or waiting for action. (Both inbound and outbound in 4.6. Use BD88 in prior versions)
BALA        ALE Application Distribution
BALM        ALE Master Data Distribution
reward points for helpful answers and close the thread if your question is solved.
regards,
venu.

Relating outbound idoc to inbound idoc to create a document

We have a requirement to relate the outbound idoc to inbound idoc , transfer the data and create a document.
Kindly let me know the tcode / configuration steps of how can we relate the idocs.
Thanks,
Nalini S.

Hi Juan,
Check the IDOC: WMATGRP01. Hope it will be helpful for you.
BR,
Lokeswari.

IDoc adapter inbound channel: Error Error when reading Exchange Profile

Hello Experts,
Currently i am working on an IDOC to file scenario, in which Data will be sent from ECC server (IDOC) to an FTP server via SAP PI, but when i try to send IDOC to PI, i am getting the following error
in Transaction SM58:-
'IDoc adapter inbound channel: Error Error when reading Exchange Profile for system XID and
client 401 occurred in the IS pipeline' .
Can anyone please help me on this.
Thanks & Regards,
Amit Naik

Hello Experts,
Let me explain to you the whole scenario, We have two servers of PI, 7.1 & 7.0. Now the Java Stack of 7.0 is not working & Cache update of 7.1 is not happening.
Thats why we have linked ABAP stack of 7.0 with Java stack of 7.1. Now we can see the objects created under Java 7.1 in ABAP stack of 7.0 (SXI_CACHE).
Now we have done all the settings to create an IDOC to file scenario. All the RFCs are working fine, but when we send an IDOC from the ECC system to ABAP 7.0, we are getting the following error 'Error while reading exchange profile for system NW' in SM58 .
Now can anyone tell me what exact settings i have to change in the Exchange profile (Java stack of 7.1), so that the Java 7.1 & ABAP 7.0 connection is setup or do i need to change anything else.
Thanks & Regards,
Amit Naik

Working on IDOC OUTBOUND FOR Vendor Master and Customer Master

Hi Group,
I need to create IDOC's for Vendor master and customer master using ALE. Whenever they create vendor/customer or changes to vendor/customer should create IDOC's.
Can anyone please help me out how to proceed? I know that we can use CREMAS/DEBMAS and CREMAS04/CREMAS...But I would like to know how to use those.
Thank-You,
Venky

Hi Sai,
Welcome to group.
Related to CREMAS/DEBMAS, for your situation, you can use the change pointers. With this, when ever there is an change/create, it will create an entry in CDHDR & CDPOS and based on that it will create the IDOCs for these.
Activate the change pointers for these message types and run the application RBDMIDOC periodically (whenever you want). This application will create the IDOCs based on your entries.
To activate the change pointers, the TCODEs are
BD50 Checking change pointer is activated for Message Type
BD52 Checking which fields are configured change pointer to create. (please make sure, an entry will exist in BDCP table)
I hope you know the remaining configuration related to partner profile entries (WE20) i.e. to which system you want to send the idocs and Inbound or Outbound etc.
Let me know if you need further info.
shylesh

IDoc adapter inbound channel: Error Fehler beim Le

Hello,
I have a BIG problem. I want to use IDOC - XI - IDOC. I have configured the connections. But when I send the Idoc to the XI. it returns a code in the SM58 "IDoc adapter inbound channel: Error Fehler beim Le" The Message comes cut, it doesn't return all the message. In the XI doesn't give me any error, nothing. The IDOC says thta it has been sent correctly (Code 3). How can I trace the IDOC from de sender to the XI?
I wanted to use the IDOC HRMD_A06 but now i'm trying with SYIDOC to see if it passes.
Can Someone help me?
Caller Function module Target system Date Time Status text
SRGEN13 IDOC_INBOUND_ASYNCHRONOUS RHXCLNT013 07.04.2006 10:06:46 IDoc adapter inbound channel: Error Fehler beim Le
Thank you
PM

I want to know if the Connections have to have SNC?
I have read this in the note http://help.sap.com/saphelp_nw04/helpdata/en/ca/fafaf6dbc8b240b1cf4a88c40379b2/frameset.htm
Inbound and outbound connections should be secured by Secure Network Communication (SNC).
Is that correct? maybe that's why it says the that error
PM

IDOC Outbound processing using SAP BC

Hello Experts,
I am trying to develop a simple IDOC outbound processing scenario using SAP BC. In this an IDOC from SAP ECC server will be sent to an external webserver via SAP BC, for this i have done all the setup i.e Establishing connection between SAP BC & SAP ECC, ALE settings, creating a new Routing rule, but when i try to run this scenario, i am getting the following error 'IDocMetaDataUnavailableException: (3) IDOC_ERROR_METADATA_UNAVAILABLE' , is there any way to import the IDOC metadata, just like how we do in SAP XI using IDX2. Please Help...
Thanks & Regards,
Amit Naik

Hi Michal,
Following is the error which i am getting :-
2009-03-12 21:56:59 IST com.sap.conn.idoc.IDocMetaDataUnavailableException: (3) IDOC_ERROR_METADATA_UNAVAILABLE: The meta data for the IDoc type "" is unavailable.
     at com.sap.conn.idoc.rt.DefaultIDocDocument.<init>(DefaultIDocDocument.java:132)
     at com.sap.conn.idoc.jco.JCoIDocDocument.<init>(JCoIDocDocument.java:74)
     at com.sap.conn.idoc.jco.JCoIDocDocument.createIDocDocument(JCoIDocDocument.java:117)
     at com.sap.conn.idoc.jco.JCoIDocRuntime.createIDocDocumentList(JCoIDocRuntime.java:83)
     at com.sap.conn.idoc.jco.DefaultJCoIDocServerWorker$IDocDispatcher.handleRequest(DefaultJCoIDocServerWorker.java:88)
     at com.sap.conn.jco.rt.DefaultServerWorker.dispatchRequest(DefaultServerWorker.java:141)
     at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.dispatchRequest(MiddlewareJavaRfc.java:2621)
     at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.executePlayback(MiddlewareJavaRfc.java:2298)
     at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.playbackTRfc(MiddlewareJavaRfc.java:2130)
     at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.handletRfcRequest(MiddlewareJavaRfc.java:2012)
     at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.listen(MiddlewareJavaRfc.java:1903)
     at com.sap.conn.jco.rt.DefaultServerWorker.dispatch(DefaultServerWorker.java:258)
     at com.sap.conn.jco.rt.DefaultServerWorker.loop(DefaultServerWorker.java:320)
     at com.sap.conn.jco.rt.DefaultServerWorker.run(DefaultServerWorker.java:219)
     at com.wm.util.TimeWrappingProvider$TimeMesuredTask.run(TimeWrappingProvider.java:40)
     at com.wm.pkg.sap.rfc.ListenerThread.run(ListenerThread.java:70)
Thanks & Regards,
Amit

Idoc - for inbound delivery order confirmation

Hi,
Can some body give me the idoc for Inbound SO Delivery Order Confirmation and if any BAPI method is there to create Delivery order confirmation.
With Regards
Vasu

Hi Vasu,
Below is the link to find out the IDOC name for ur Inbound IDOC scnario
http://help.sap.com/bp_bpmv130/Documentation/K17_BPP_EN_US.doc
Hope this willl help you.
Reward if helpful.

Idoc data comparison between different R/3 clients.

Hi ppl ,
Is there a way idoc comparison can be done between different clients without going
by Segment by Segment comparison ?
I have a requirement wherein i have thousands of idocs in QA system and i need to
compare those with the ones in PROD system. The segments in the idocs may vary
depending on the data that flows from the third party system which will post idocs in R/3.
So, the segment wise comparison of data is also ruled out .
Do we have any standard reports which will help in achieving this purpose ?
Please let me know how the idoc data comparison can be carried out .
Regards,
Nick.

Hi Nick,
There is no standared tools available for comparing the data of two idocs.
By using beyond compare s/w you can check the data, but the thing is you have to download the idoc data to file format.
By using Idoc_xml_transform function module you can download idoc data to xml format, after you can compare.
Check this
http://download.cnet.com/Beyond-Compare/3000-2242_4-10015731.html
Regards
Ramesh

SM58 - IDoc adapter inbound: IDoc data record table contains no entries

Trying to send Idocs from SAP ECC6.0 via PI 7.0 up until 2 days ago there was no problem.
Since yesterday, only one specific type of Idoc does not make it into XI (PI). In the Idoc monitor (WE02) the idocs that were created gives status 3 which is good. But all Idocs of that specific type (ZRESCR01) does not go to XI. I can only find them bakc in SM58 where it gives the following message:
IDoc adapter inbound: IDoc data record table contains no entries
I have checked SAP notes 1157385 and also 940313, none of them gives me any more insight into this error. I have also checked all the configuration in WE20, SM59, and in XI (repository and directory) and in XI IDX1, IDX2 but could not find anything that would cause this. I can also not think of anything that changed since 2 days ago.
Please point me in the right direction.

hi,
i think in sm 58 u can find entries only when there is some failure in login credential .
if there is change in IDoc structure than you have to reimport the idoc metadata defination at IDX2.otherwise not requird.
please check the logical system name pointing to the your requird target system....
please also verify thet your port should not be blocked.
pls find the link it may help
Monitoring the IDOC Adapter in XI/PI using IDX5
regards,
navneet

IDoc outbound errors - mail send step in WF to send info-mail to enduser

Hello specialists
I searched quite a lot in the forums now. I found lot of info but nothing regarding my issue.
I need to send an info-mail to the end user creating purchase orders. But only if the idoc (outbound ORDERS) could not be sent (failing for some reason, i.e. if rfc connection fails). This is what I've done to achieve this:
- in WE40 I linked my WF to process code EDIO
- the WF-BATCH user has an email address assigned to it (in SU01)
- the mail sending step in my WF is configured like this:
recipient type = G (organizational object)
Expression = &_WORKITEM.CREATEDBYUSER.ID& (this contains the enduser id)
subject = Test for &WORKITEM.CREATEDBYUSER.ID&
When testing the mail can not be delivered (error SO23).
When setting recipient type to U (E-Mail address) and giving a valid e-mail address, then it works fine (SCOT, etc. is configured and mailing to external systems works). But setting the e-mail address hard coded style in the mail send step is not an option here!
It seems that the send mail step (SELFITEM.SENDTASKDESCRIPTION) always requires a valid e-mail address. Is it not able to handle SAP user id's ?
Thanks in advance for some guideance on this one.
Renaud
Edited by: Renaud Desarzens on Feb 11, 2010 3:00 PM

Hello and thanks for your help.
I was able to solve it like this:
- don't use mail send step
- instead, add new activity with a new task (SELFITEM.SENDTASKDESCRIPTION)
- in the bindings (workflow -> step) set:
B --> &TYPEID&
&_WORKITEM.CREATEDBYUSER.ID& --> &ADDRESSSTRINGS&
Seems that the mail send step doesn't allow TYPEID to be "B" because each time I tried to tweak the generated bindings that way it messed up the recipient type and expression I set before.
Regards
Renaud

How can create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version

Hi All,
Can any one help, how to create SEGMENTS and IDOC TYPE in BADI in ECC 6.0 version.This is my task.
Given BADI name was----VENDOR_ADD_DATA_BI .
Thanks

Anil,
look at this thread ..may be this helps you.
Re: 824 IDOC and BADI/User Exit
sateesh.

RFC For IDoc outbound processing

I am creating an RFC for BDC for call transaction we19
input as : idoc number
and output:-.. iDoc Outbound processing done
so:-
I go to we19> give iDoc Number (say, some number for ALEREQ01), and execute> click on Outbound processing-->click enter -->enter
in this way, I can process any iDoc from SAP system to outbound.
I want to create RFC for the same.
Problem:-
when i am executing that RFC, and when I check the iDoc status in we05, that iDoc shows status as Idoc ready to dispatch( its in yellow color).. Its not showing green color and not saying that IDoc passed OK
when I try manually ,I see the status green..OK..successfully
Any idea why I am getting this problem??
Is there any problem in my BDC recording?..but when I run that recording for Process, i dont see any problem,it executes successfully.. but when I copy the Code from BDC and make a RFC using that code, its giving problem as mentioned.

Hi Ankit,
Theorotically it should work.... but I'll suggest not to use BDC here. What you can do is,
1. You have Idoc number..Right?
2. Read control record from EDIDC and data record from EDID4.
3. Then call Master_idoc_distribute.
4. This will again distribute the same IDoc with same control and data record as a new one. It will be same as WE19 , but without WE19.
Please check and confirm.
Regards,
Audy.

IDoc adapter inbound channel: Error Error while read

Dear All
I am sending idoc from SAP 4.6C to PI. But on SM58 I am getting an error
IDoc adapter inbound channel: Error Error when reading
Which is not complete because field length is 50 characters , double clicking on this message is asking for message class. How can i see the complete message.
Can any one send me configuration detail of receiving IDOC at PI end , I don't want send to it forward from PI.

Please clear these points.
In PI system:
1. Create RFC destination of type 3 pointing to R/3 system.
2 . create Port using the IDX1 t-code port name should be SAP + SYSTEM ID OF R/3 system.
3. Using IDX2 import the IDOC meta data in to your PI system.
RFC destination to which direction , towards sender of IDOC ?
Port of which system sender system or receiver system?
What about configuration in Integration Directory , is there any configuration required on integration repository and on integration directory.
What will be the procedure of seeing complete message on SM58.
-->In PI system while ur creating the RFC destination of type 3 give the hostname and system number of ur R/3 system ie SAP 4.6 c.
-->In PI create Port using the IDX1 t-code port name should be SAP + SYSTEM ID OF R/3 system and in that RFC destination option, maintaine the destinatination name which we created using sm59.
-->coming to IR you need to create the:
                    1. Receiver data type.
                    2. receiver message type
                    3. receiver message interface. No need to create the above 3 for sender.
                   4.while mapping source is your Idoc and target is your receiver message type.
                   5. while interface mapping source is Idoc and target is receiver interface.
-->Coming to ID no need to create sender communication channel and no need to create sender agreement.
-->create receiver communication channel and receiver agreement.
--->create Interface determination.
-->create receiver determination.
-->If message got stuck in SM58, unlock it by using double click or activate the selected message.
Thanks

AES filing error - Idoc Outbound Processing: EDI number cannot be compiled

Hi Gurus,
We are configuring the AES filing.
we've done the EDI configI and initally we got the error that EDI partner is not maintained. As per the suggestions from this Forum we've added the cusoms office details in geography tab.
Now when we are trying to process the same, we are getting the error "Idoc Outbound Processing: EDI number cannot be compiled"
All suggestions are welcome.........
Thanks in Advance.

Hi Shiva,
Here goes the solution: you need to maintain the Number of the Number Ranges starting with "10" and this applies only to GTS system as this is HARD-CODED in the Program, apart from 10 any number of the number range will result in an "EDI Number Range compilation" error.
Cheers
Harsha

IDoc (Outbound & Inbound) PO to ECC (2 clients)

Similar Messages

Maybe you are looking for