Idoc segment population logic needed
Hi experts,
I am creating a custom idoc. The custom idoc has one parent segment(zhead1) and a child segment(zinvoice).
I am populating the invoice numbers(BELNR) and their line items in the child segment against a particular check number(PAYR_CHECT).
The structure is coming something like this: If a check has 2 different invoices each having two diff. line items, then 4child segment(containing invoice no. and it's respective line item in one child segment) is getting created against a parent segment(containing check header details).
But I require a parent segment to get populated against each check no. as well as invoice number and the invoice line items to be in the child segment of the invoice header segment.
How to do this.
My current code is:
LOOP AT T_ZCHKHDR INTO WA_ZCHKHDR.
CLEAR T_IDOC_DATA.
Fill the header segment
ZCHKHDR-ZBUKR = WA_ZCHKHDR-ZBUKR.
ZCHKHDR-CHECT = WA_ZCHKHDR-CHECT.
ZCHKHDR-ZALDT = WA_ZCHKHDR-ZALDT.
ZCHKHDR-VOIDD = WA_ZCHKHDR-VOIDD.
ZCHKHDR-RWBTR = WA_ZCHKHDR-RWBTR.
ZCHKHDR-STATUS = WA_ZCHKHDR-STATUS.
ZCHKHDR-BANKA = WA_ZCHKHDR-BANKA.
ZCHKHDR-RZAWE = WA_ZCHKHDR-RZAWE.
ZCHKHDR-XBLNR = WA_ZCHKHDR-XBLNR.
ZCHKHDR-LIFNR = WA_ZCHKHDR-LIFNR.
ZCHKHDR-WMWST1 = WA_ZCHKHDR-WMWST1.
ZCHKHDR-BKTXT = WA_ZCHKHDR-BKTXT.
T_IDOC_DATA-SDATA = ZCHKHDR.
*-- Reduce fields for the segment
CALL FUNCTION 'IDOC_REDUCTION_FIELD_REDUCE'
EXPORTING
MESSAGE_TYPE = C_MSG_TYPE
SEGMENT_TYPE = C_SEGNAM_ZCHKHDR
SEGMENT_DATA = T_IDOC_DATA-SDATA
EMPTY_SYMBOL = C_SLASH
IMPORTING
SEGMENT_DATA = T_IDOC_DATA-SDATA.
T_IDOC_DATA-SEGNAM = C_SEGNAM_ZCHKHDR.
T_IDOC_DATA-MANDT = SY-MANDT.
APPEND T_IDOC_DATA.
Fill the item segment
LOOP AT T_ZCHKLN INTO WA_ZCHKLN WHERE CHECT = ZCHKHDR-CHECT.
ZCHKLN-CHECT = WA_ZCHKLN-CHECT.
ZCHKLN-EBELN = WA_ZCHKLN-EBELN.
ZCHKLN-PO_EBELP = WA_ZCHKLN-PO_EBELP.
ZCHKLN-PO_WERKS = WA_ZCHKLN-PO_WERKS.
ZCHKLN-PO_KOSTL = WA_ZCHKLN-PO_KOSTL.
ZCHKLN-PO_WBS = WA_ZCHKLN-PO_WBS.
ZCHKLN-PO_SAKTO = WA_ZCHKLN-PO_SAKTO.
ZCHKLN-BELNR = WA_ZCHKLN-BELNR.
ZCHKLN-IN_BUZEI = WA_ZCHKLN-IN_BUZEI.
ZCHKLN-IN_MENGE = WA_ZCHKLN-IN_MENGE.
ZCHKLN-IN_MWSKZ = WA_ZCHKLN-IN_MWSKZ.
ZCHKLN-IN_WRBTR = WA_ZCHKLN-IN_WRBTR.
ZCHKLN-IN_BSTME = WA_ZCHKLN-IN_BSTME.
T_IDOC_DATA-SDATA = ZCHKLN.
*-- Reduce fields for the segment
CALL FUNCTION 'IDOC_REDUCTION_FIELD_REDUCE'
EXPORTING
MESSAGE_TYPE = C_MSG_TYPE
SEGMENT_TYPE = C_SEGNAM_ZCHKLN
SEGMENT_DATA = T_IDOC_DATA-SDATA
EMPTY_SYMBOL = C_SLASH
IMPORTING
SEGMENT_DATA = T_IDOC_DATA-SDATA.
T_IDOC_DATA-SEGNAM = C_SEGNAM_ZCHKLN.
T_IDOC_DATA-HLEVEL = 2.
T_IDOC_DATA-MANDT = SY-MANDT.
APPEND T_IDOC_DATA.
ENDIF.
CLEAR: WA_ZCHKLN.
ENDLOOP.
AT LAST.
PERFORM SUB_MASTER_IDOC_CONTROL.
T_IDOC_HEADER-MESTYP = C_MSG_TYPE.
T_IDOC_HEADER-IDOCTP = C_IDOC_TYPE.
SELECT SINGLE PARNUM FROM EDPP1
INTO V_SDNPRN
WHERE PARTYP = C_LS. "#EC
T_IDOC_HEADER-SNDPRN = V_SDNPRN.
T_IDOC_HEADER-SNDPRT = C_LS.
T_IDOC_HEADER-OUTMOD = C_OUTMOD.
T_IDOC_HEADER-STDMES = C_STDMES.
T_IDOC_HEADER-RCVPFC = V_RCVPFC.
T_IDOC_HEADER-RCVPRN = V_RCVPRN.
T_IDOC_HEADER-RCVPOR = V_RCVPOR.
T_IDOC_HEADER-RCVPRT = C_LS.
DESCRIBE TABLE T_IDOC_DATA LINES V_LINES.
IF V_LINES > 0.
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
MASTER_IDOC_CONTROL = T_IDOC_HEADER
TABLES
COMMUNICATION_IDOC_CONTROL = T_COMM_IDOC_CONTROL
MASTER_IDOC_DATA = T_IDOC_DATA
EXCEPTIONS
ERROR_IN_IDOC_CONTROL = 1
ERROR_WRITING_IDOC_STATUS = 2
ERROR_IN_IDOC_DATA = 3
SENDING_LOGICAL_SYSTEM_UNKNOWN = 4
OTHERS = 5.
IF SY-SUBRC = 0.
READ TABLE T_COMM_IDOC_CONTROL INTO WA_COMM_IDOC_CONTROL INDEX 1.
IF SY-SUBRC = 0.
MESSAGE S000(ZFI) WITH WA_COMM_IDOC_CONTROL-DOCNUM.
ENDIF.
ELSE.
MESSAGE W001(ZMM) WITH TEXT-003.
ENDIF.
ENDIF.
CLEAR T_IDOC_DATA.
REFRESH T_IDOC_DATA.
ENDAT.
CLEAR: WA_ZCHKHDR.
ENDLOOP.
Regards,
Sangeeta.
As many entries you have in t_zchkhdr those many headers will be created for header and as many entries you have in t_zchkln , those many entries will be created in line.
I hope you have the occurences as 1 to many for lines.
Also you are distributing the IDoc within the loop at t_zchkhdr so one IDoc will be created per t_zchkhdr line.
If you want one Idoc containing all the headers, then move the MASTER_IDOC_DISTRIBUTE outside the outer loop.
regards,
Advait
Edited by: Advait Gode on Nov 5, 2008 3:46 PM
Similar Messages
-
ZBATMAS03 - extended idoc segment population
Hi,
I've found an extended IDoc ZBATMAS03 (basic type: BATMAS03). It's being used for generating outbound IDOc usiong change pointers. A new segment Z1BATMAS has been added to the extended one.
Now I'm not able to find where this segment is being populated.
I tried searching in FM: MASTERIDOC_CREATE_SMD_BATMAS and the where used list for the new segment.
can anyone tell me how to find where the above new segment is being populated?
regards,
RaviHi,
First up all the FM name is MASTERIDOC_CREATE_SMD_BATMAS, I surprised after dont find any exit for this FM.. May be you need to copy this FM and do the changes... Yes this the FM used to create an Idoc BATMAS.
You need to create custom function module with reference to standard FM, fill your extension segment.
Regards,
Suresh.D -
Vendor master IDOC segment population ?
Hi All,
I have to create vendor master idoc and pass it to a third party system.
The fields required by the third party system are from tables lfa1 , lfb1,lfm1. The data required is mapped to segments in idoc
I am using the MASTERIDOC_CREATE_CREMAS FM to generate the idoc.(idoc tyoe :cremas04)
The idoc is created and generated but I can see only the E1LFA1M segment populated with data. No other segments are getting populated , Can anyone tell me why is that so and how it can be solved.
Thanks,Hi,
Please check CREMAS message type, perhaps there is <b>reduced message type</b> or <b>segment filter</b>. Go to transaction code <b>BD53</b> or <b>BD56</b> to find out.
Hope this will help.
Regards,
Ferry Lianto -
Custom idoc segment fields not populated
Way back in 1999 someone create a custom Idoc type with custom Idoc segments in it. Unfortunately, they forgot to release one of the segments.
Recently a change was request to add new fields to this custom segment. In order to get the fields transported the segment had to be released.
All worked fine in Dev and the new Idoc segments were populated as expected. However when the idoc segment was moved to the test system all visually appears to be fine but when the idoc is created (status 50) the new fields are not popultated.
In 40B the start of the inbound process was IDOC_INBOUND_DATA. Does anyone know what the new starting point is in 4.7??
I beleive the error is actually that SData is not reading all the input values and stopping right where the old fields end in teh custom segment.
Thanks,
Anthonyadditionally,
SAP will not allow us to release the basic idoc type because it was released in 40B. It also will not allow us to cancel the release since we are now in 620. So, unless anyone has input for this I think the only solution will be to create a successor IDoc type and change our apps to use the new IDoc type with it's enhancements. -
Adding field in standard IDOC Segment E1EDL24
Hello Friends,
I have an urgent requirement that I have to extend IDOC segment E1EDL24 with two fields PABNR and LFSNR.
When I tries to change the segment in WE31, it shows an error message that you can only modify the segments of customer namespace and cannot modify Standard IDOC Segments.
Can we modify the standard IDOC segments, and if yes, how can we modify the standard IDOC segments. Please clarify.
Points will be rewarded generously.
Regards,
NavinHi Naveen,
We cannot Modify the Standard segments. But we have to Create a new Segment and Add these fields.
Then Create an Extended Idoc type
Implement User Exits in Outbound And Inbound ..
This is the Complete Steps and Info on this...with an Example...
Enhancing ALE
For example, if in an outbound interface you find that the IDOC type does not contain all the data you need to pass to the other system, you can extend the IDOC to accommodate the additional fields and enhance the ALE function modules to populate the fields. Similarly, if in an inbound interface, there is additional data that needs to be posted to the R/3 application, you can extend the IDOC type to have additional fields populated by the external system or translator or the other R/3 system and then enhance the inbound ALE function modules to post the additional data to the R/3 application.
let us use the SAP Customer Master application as an example. Specifically, letâs focus on the IDOC extension and ALE function module enhancement of IDOC type DEBMAS02 and message type DEBMAS (Customer Master) and the IDOC reduction of message type MATMAS.
IDOC EXTENSIONS
Letâs first look at the concept of IDOC extension. SAP delivers Basic IDOC types such as DEBMAS02, MATMAS02, ORDERS02, and WMMBID01. By extending the Basic IDOC type, you are actually creating a new IDOC type. You create a new segment with the additional fields. This new segment has to be associated with one of the existing Basic IDOC segments. Then you create a new extension type, which is associated with the Basic IDOC type. This results in a new IDOC type. In order for ALE function modules to relate to this new IDOC type, the IDOC type is linked to the corresponding message type.
Note that you should not add fields to existing segments but should create a new segment and associate it with an existing segment. This, in a nutshell, is the process of creating IDOC extensions.
In our example, the Basic IDOC type DEBMAS02 is used to communicate Customer Master data to the SAP Customer Master application. Even though the application has a screen to enter and store a contact personâs business address (see Figure 1), DEBMAS02 does not have a segment or fields that communicate the contact personâs business address. If your business requires that this business address be communicated to the other system through the ALE interface for Customer Master, then you have to extend the DEBMAS02 IDOC type, and enhance the corresponding ALE function module.
In DEBMAS02 the contact person fields are present in segment E1KNVKM and the business address of the contact person is stored on the SADR SAP table. You need to create a new segment, Z1SADRX, that is associated with E1KNVKM. This will be done in the process of creating an extension type ZDEBMASX. This extension type will then be associated with a new IDOC type, ZDEBMASZ. IDOC type ZDEBMASZ will be linked to message type DEBMAS for Customer Master. The final step in the IDOC extension process is to check the new objects. This check also verifies the structural integrity of the IDOC type. Letâs look at each of these steps in more detail.
1. Create an Extension Type and a New Segment.
Determine the fields on table SADR that you are going to provide for in the new segment Z1SADRX. You need fields for name, street, city, region, and country to give the business address of the contact person. You also need fields for the address number. ADRNR is a field in SAP tables such as SADR that uniquely identifies the address of an entity. This field is cross-referenced from other tables to the SADR table to obtain the full description of the address. Because this is an IDOC type for master data, the first field of the new segment will be MSGFN. The message function field informs the receiving system of the action to be taken for that particular segment. In the code that you write for populating the new segment, the value of the message function is the same as that of the parent segment E1KNVKM. In all, you will have 12 fields in segment Z1SADRX (see Table 1).
To create an extension type and new segment:
Use transaction WE30 or from WEDI go to Development -> IDOC types.
Enter ZDEBMASX for Object Name.
Choose Extension Type.
Click on Create.
You will see a pop-up screen. Choose Create New, and enter a description. For version 4.x, enter DEBMAS02 in the Linked Basic Type field. Enter.
You will see a screen with ZDEBMASX and its description in the first line. Click on this line, and press Create. For version 4.x, expand the tree of segments, and place the cursor on E1KNVKM.
You will see a pop-up screen. Enter E1KNVKM as the reference segment. Enter.
For 4.x, press Create after placing the cursor on segment E1KNVKM.
You will see a line appear with E1KNVKM hierarchically below ZDEBMASX, with a description "Customer Master contact person (KNVK)."
Click on this line and press Create. You will receive a message indicating that the new segment being created will be a child segment of E1KNVKM. Enter. A pop-up box appears for the new segment.
Enter Z1SADRX as the segment type, 1 for Minimum, 1 for Maximum. Leave Mandatory segment unchecked. These entries imply that there is only one Z1SADRX segment for every occurrence of the E1KNVKM segment, and also that this segment is not mandatory. Note that if the parent segment is not mandatory, then the child segment should not be mandatory, because this could result in a syntax error during the creation or processing of the IDOC.
For 4.x, you must first create the IDOC segment Z1SADRX (Iâll explain why in a moment) from the menu path WEDI -> IDOC -> Development -> IDOC Segment.
Click on Segment Editor.
On the next screen, click on Create.
Enter a development class for the object. Enter.
This will take you to the screen for segment definition. Enter a description for the segment. Enter the field name, data element, and the data element documentation name. In most cases, all three fields may have the same values. If you are using a field in the segment that is not present in the ABAP/4 data dictionary, you must first create the domain, data element, field, and appropriate documentation before using it in the new segment.
Enter these three columns for all 12 fields. Save.
Click on Generate/Activate, F3 to step back.
From screen Maintain Segment, go to Segment Type -> Release. A checkbox now appears beside the segment definition Z1SADRX (see Figure 2). Check this box. Save.
Save again to store the descriptions of the segment, F3 to step back.
Save the extension type.
It is possible to have several new segments with relevant Basic IDOC type parent segments in a single extension type. However, you can form only one IDOC type based on a single extension type.
2. Create an IDOC Type.
The next step is to create an IDOC type by associating the extension type that you created with the Basic IDOC type. This is a simple process:
From transaction WE30 or WEDI go to Development -> IDOC Types.
Enter ZDEBMASZ for Object Name.
Click on IDOC Type.
Click on Create.
Enter DEBMAS02 for Basic IDOC type.
Enter ZDEBMASX for extension type.
Enter a description.
Enter.
You will see a display of the composite IDOC type with all segments, including Z1SADRX (see Figure 3).
It is possible to associate only one extension type with a Basic IDOC type for a given IDOC type. However, you can have multiple new segments in an extension type.
3. Link IDOC Type to Message Type.
The next step is to link the new IDOC type to its corresponding message type. This is important, because this relationship is referenced in the partner profile parameters where you specify the message type and IDOC type to be used for that particular representative system. To link the message type:
Use transaction WE82, or from WE30, go to Environment -> IDOC Type / Message Type, or from WEDI go to Development -> IDOC Type -> Environment Î IDOC Type / Message Type.
Click on Display <-> Change.
Click on New Entries.
Enter DEBMAS for message type.
Enter DEBMAS02 for Basic IDOC type.
Enter ZDEBMASX for extension type.
Enter your SAP R/3 release number for Release.
Save.
This data is stored on the EDIMSG table and is accessed by several ALE processes to relate the message type to the IDOC type.
4. Check the IDOC Type.
Before checking the IDOC type for consistency, it is important to perform another step that releases the extension type to the IDOC type:
From WEDI go to Development -> IDOC Types -> Extras -> Release Type, or from transaction WE30 go to Extras -> Release Type.
For the Object Name ZDEBMASX and radio button Extension Type, click Yes.
The extension type has now been "released."
You canât edit the extension type once itâs released. To cancel the release for further editing or deactivation, go to WE30 Î Extras Î Cancel release. The final step in the IDOC extension process is checking the validity of the IDOC type:
From transaction WE30 or WEDI go to Development -> IDOC types.
Enter ZDEBMASX for Object name.
Click on Extension Type.
From the Development Object menu select Check.
Repeat the operation for IDOC type ZDEBMASZ.
A check log will be generated for each run with details of correctness or errors (see Figure 4).
In some situations it is possible to receive errors during the check process, especially segment length errors. The incorrect IDOC segment can be repaired and corrected by executing program RSEREPSG. This program checks the formal consistency and repairs incorrect segments. In test mode it will generate a log of formal correctness for the specified segment only. For the program to repair segments in normal mode, the underlying IDOC structures (DDIC structures) must be active. This program rectifies the lengths of the DDIC structures and not the fields themselves. RSEREPSG can also be used to change the person responsible for the object and the release flag.
Menu paths may vary slightly depending on the release/version of SAP R/3, but the procedures and the principles are the same.
ALE FUNCTION MODULE ENHANCEMENTS
Having extended the IDOC type to contain additional fields for an inbound or outbound application, you now want to enhance ALE function modules for populating the additional segment on the outbound or applying the additional segment data on the inbound application.
The core working code for ALE processes for a given application area is always encapsulated in ABAP/4 function modules. These function modules are associated with such control information as message types and process codes. So the ALE process checks this control information and derives the name of the function module to invoke for that particular IDOC processing from certain database tables. These function modules contain objects known as customer functions, which can be considered SAP Enhanced user exits. A function module is called at a particular point during the processing of the main program or function module, and it can be used to influence data processing at that point by adding code to the customer function. The customer function behaves like a normal function module and has import and export parameters, tables (internal tables) statement, and exception processing. Unlike a conventional user exit, customer functions give you the ability to modify only data available to you by the function moduleâs parameters and internal tables. While most ALE/EDI function modules are supported by customer functions, there are ALE/EDI processes that still use conventional user exits. There are a few ways to determine which function module to enhance for a given message type/process code:
For master data distribution, from SALE go to Extensions -> Master data distribution -> Setup additional data for message types. Search for message type DEBMAS in this example. You see an entry for DEBMAS associated with function module MASTERIDOC_CREATE_SMD_DEBMAS. This data is stored on table TBDME. The function module names for all master data message types follow this pattern: MASTERIDOC_CREATE_SMD_messagetype. This function module calls another function module of name MASTERIDOC_CREATE_DEBMAS or MASTERIDOC_CREATE_messagetype. Search for the words customer function, and you find several hits that can be used to add code to the function module.
From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
Use transaction WE57 or from WEDI go to Development -> Message/Application Object. The entries list the function module, Business Object, message type, and IDOC type that are used for inbound ALE/EDI interfaces.
Customer functions are not specific only to ALE and EDI but also to all programs/modules in SAP R/3. Customer function is a SAP enhancement component; the other two types are menu and screen enhancements.
All customer function exits are maintained in SAP enhancements and are found by using transaction SMOD. After executing transaction SMOD, pull down (F4) on the enhancement name field, and execute again. This provides you with a list of all SAP enhancements available. SAP enhancements are grouped by development class pertaining to an application area. Choose Application development R/3 SD master data distribution for development class VSV to lead to a screen that lists VSV00001 as an enhancement (see Figure 5). Press Component +/- to display its function exit components. There are four possible components listed, all of which are function exits (and are function modules) that are called from the ALE function modules in the form Call Customer Function Î001â. This is a special occurrence of the ABAP statement Call. Go to item Exit_SAPLVV01_ 001, which you need to enhance for the Customer Master outbound example of an IDOC extension. In the ALE-function module MASTERIDOC_CREATE_DEBMAS, the statement CALL Customer Function 001 is translated in the background to call component EXIT_SAPLVV01_001. Although this function exit can be edited using transaction SE37, you will use a simpler approach.
When you use SAP enhancements and their components, you manage them with an SAP object known as a project, which is like an envelope containing the selected enhancements and their components. A project can be used to control the execution of components and to transport them to other clients and instances in SAP. Basically, the process involves creating a project, including enhancements and components that are to be enhanced, editing the components, and then activating the project. The following process creates a project for our example Customer Master IDOC extension:
Execute transaction CMOD.
Enter name of project, say CSTMAST1.
Click on Create.
Enter a description of the project.
Save.
Click on SAP Enhancements.
Enter VSV00001 for Enhancement.
Save.
Once youâve created the project, edit the function exit components and activate the project. Remember that the code in the function exit enhancement will execute only if the project is activated. In fact, this is a convenient SAP enhancements feature, whereby the work in progress (developing code in the customer function) will not affect users of that application. When the code is completed, the project can be activated so the enhanced functionality takes effect. It can also be deactivated for maintenance.
As mentioned earlier, customer functions (function exits) are embedded in ALE function modules and can be used to influence the creation and modification of IDOC data on an outbound application or to post additional or modified IDOC data to an inbound R/3 application. Function exits are similar to regular function modules, with import/export parameters, tables (internal tables), and exceptions.
The two important factors to consider while developing the customer function are:
1. The point in the ALE function module where the function exit occurs
2. The data made available by the customer function that can be modified or posted to the R/3 application, based on the direction.
Because some function modules have several customer functions, it is critical to choose the function exit best suited for that particular enhancement. Do not attempt to perform activities that the function exit is not designed for. The importance of this point is illustrated by the following description of enhancing function modules for outbound and inbound ALE interfaces.
Outbound interfaces. In an outbound ALE interface you use function exits (customer functions) to populate additional segments created by an IDOC extension or to modify the existing IDOC data segments as per business requirements. Previously, you identified that enhancement VSV00001 has a component EXIT_SAPLVV01_001 (function exit), which can be used for populating the additional data segment Z1SADRX that you created in the IDOC extension ZDEBMASX (IDOC type ZDEBMASZ, based on Basic IDOC type DEBMAS02). You also learned that the ALE function module that calls this function exit is MASTERIDOC_CREATE_DEBMAS, which has a statement Call Customer Function 001.
Browse the function module MASTERIDOC_CREATE_DEBMAS using transaction SE37. You will find that this customer function is invoked for every segment of IDOC type DEBMAS02. In fact, the function exit is called soon after the creation of an existing segment has been populated with data and appended to the IDOC data table (internal table). Also, the function exit is exporting the message type, IDOC type, and the segment name and is importing the IDOC extension type. It is also passing the IDOC data internal table. This indicates that the ALE function module is allowing you to populate additional segments for every existing segment and modify the existing segmentâs data.
Letâs write ABAP/4 code to accomplish the task of populating IDOC segment Z1SADRX with a contact personâs business address:
From SE37, display function module MASTERIDOC_CREATE_ DEBMAS.
Find Customer Function 001.
Double-click on 001.
The function EXIT_SAPLVV01_001 will be displayed.
Double-click on INCLUDE ZXVSVU01.
You will be asked to create a new include object. Proceed as desired.
Enter code (as in Listing 1).
Be sure to perform a main program check (Function Module -> Check -> main program) and extended program check (Function module -> Check -> Extended check).
Now that you have extended the IDOC and enhanced the ALE function module based on the requirements for the contact personâs business address on the Customer Master, letâs test the interface. You should create a logical system and define a port for this interface. You should also configure the Customer Distribution Model to indicate that message type DEBMAS is being distributed to this logical system. The only difference in configuration between a regular outbound ALE interface and an enhanced one is the partner profile definition. While maintaining the outbound parameters of the partner profile, make sure the IDOC type is ZDEBMASZ. The fields for Basic IDOC type and extension type are automatically populated with DEBMAS02 and ZDEBMASX, respectively.
To maintain the contact personâs business address of a customer:
Use transaction BD12 or from BALE go to Master Data ->Customer -> Send and send that Customer Master record by executing the transaction after filling in the relevant fields such as customer number, message type, and logical system.
Use transaction WE02 or WE05 to verify the IDOC created. You should see the new segment Z1SADRX populated with the correct data.
With SAP releases below 4.5B, you cannot capture changes to business address through change pointers because a change document object is not available for capturing business address changes, and also earlier releases have not been configured to write change documents for a contact personâs business address. If you would like this functionality, you can either create change document objects, generate function modules to create change documents, and perform ALE configuration to tie it in, or make a cosmetic change to the contact person screen data while changing the contact personâs business address so that it gets captured as a change to the Customer Master. Subsequently, the ALE enhancement that you performed captures the contact personâs business address.
Inbound interfaces. The process for enhancing inbound ALE interfaces is similar for outbound, with a few exceptions; specifically in the coding of customer functions (function exits) for the ALE/EDI function modules.
The first step is to create an IDOC extension for the specific Basic IDOC type by adding new segments at the appropriate hierarchy level: that is, associated to the relevant existing segment. Populate the data fields on the new segments with application data by the translator or external system/program before importing them into the R/3 System. Then, find the ALE function module that is invoked by the inbound processing. By browsing through the code or reading the documentation on the function exit enhancements using the SMOD transaction, identify the function exit in which you should place your code. The technique used in the code to post the additional or modified IDOC data to the application can vary based on the application rules and requirements, the data available at that point in processing, and the application function modules available to update the application tables. It is important to search first for application modules that process the data and see if they can be called within the function exit. If the additional data in the extended segments in specific to a custom table or resides in nonkey fields of a single or small set of tables, you may be able to update it directly by SQL statements in the function exit. This approach should be carefully evaluated and is certainly not highly recommended.
Another option is to use Call Transaction from within the function exit to process the additional data. For example, in the case of message type WMMBXY for inbound goods movements from a warehouse management system, the standard interface creates batches for materials, but does not update its characteristics. In such a case, you can use Call Transaction MSC1 to create the batch and assign characteristic values to it from within the function exit provided.
Error handling is a very important consideration when making enhancements to inbound ALE/EDI objects. In ALE and EDI inbound processing, workflow is used for handling errors at different levels such as technical and application. If workflow has been configured for the interface, the error messages and workflow items flow to the inbox of the named recipient(s).
It is also critical to enhance the workflow that handles notifications of the inbound ALE/EDI process. In most scenarios this is not a very difficult task because SAP lets you influence the workflow parameters and messages in function exits (customer functions). You typically do this using flags and message codes to trigger certain workflow actions. If you conform to the status codes and flags stipulated for workflow processing, the enhancement could be error-free and seamless. In the case of an inbound IDOC with an extension, you should populate the EDIDC fields IDOCTYP (new IDOC type) and CIMTYP (extension type) accordingly.
Reward if Helpful -
Z segment population in DEBMAS07
Hi Experts,
I have copied DEBMAS07 to ZDEBMAS07 and added one segment ZTAX at very last to the tree where it should be populated with some logic. I am using BADI (CUSTOMER_ADD_DATABI) to populate the node (As someone suggested). I am also done with message type-idoc type assignemts in we82. But I am not able to populate the data in ZTAX at the very end of the the line
in the logic.
Can anyone show me d way ?
-=Soni=-I have solved the issue. For adding z segment to the desired location or at the last of the idoc tree, all you need to use USER EXIT as EXIT_SAPLVV01 (VSV00001).
-
Replaced value is not getting relected in IDOC segment field
Hi,
Need your help for the below issue.
I am replacing the PO # with Delivery Doc # . But the replaced value is not getting reflected in the IDOC segment field(e1bp2017_gm_item_create-po_number.).
Function Module which I am using is IDOC_INPUT_MBGMCR as a copy.
Here is my code given below:
SELECT
SINGLE vbeln
INTO lx_vbeln
FROM lips
WHERE vgbel EQ e1bp2017_gm_item_create-po_number.
Move lx_vbeln TO e1bp2017_gm_item_create-po_number.
MOVE-CORRESPONDING e1bp2017_gm_item_create
TO goodsmvt_item.
Then this is passed as TABLE in "BAPI_GOODSMVT_CREATE".
Please do the needful.Hi Dheepa,
Check it in debug whether the filed is empty or having po#, when ur code is executed for the replacement. if it is empty, po# is populated after ur code. in this case you need to write the code in suitable place.
Reddy -
How to map idoc segment field E1IDB02-FIIKONTO with BSEG-ESRNR.
Hi,
I have searched for lot of threads in the forum , and also i tried myself but i am not able to map this fields segment with my logic, so please anyone kindly contribute in mapping idoc segment field with the logic given below:
idoc type :PAYEXT outbound idoc.
message type: PEXR2002
This is my logic: i need to populate the ISR number(BSEG-ESRNR ) in idoc segment field( E1IDB02-FIIKONTO)
DATA : str1 TYPE string,
len1 TYPE i,
len2 TYPE i,
str2 TYPE string,
str3 TYPE string.
str1 = '01-1234-4'. ---> BSEG-ESRNR "ISR Subscriber Number
REPLACE FIRST OCCURRENCE OF '-' IN str1 WITH '_'.
REPLACE ALL OCCURRENCES OF '-' IN str1 WITH space.
CONDENSE str1.
len1 = STRLEN( str1 ).
IF len1 LT '9'.
len2 = '9' - len1.
CASE len2.
WHEN '1'.
REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '00'.
WHEN '2'.
REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '000'.
WHEN '3'.
REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '0000'.
WHEN '4'.
REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '000000'.
WHEN OTHERS.
ENDCASE.
ELSEIF len1 EQ '9'.
REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '0'.
ELSEIF len1 GT '9'.
REPLACE ALL OCCURRENCES OF '_' IN str1 WITH space.
CONDENSE str1.
ENDIF.
Thanks in Advance.Resolved.
-
EDI IDoc Segment Filtering Transactions
Hi All,
Is there any transaction for EDI IDoc segment filtering where partner profile is set up with partner type as 'customer' or 'vendor' (and not partner type as 'logical system' where ALE IDoc segment filtering transactions BD59 & BD64 can be used) ?
Thanks !Thanks Lokeshwari.
Actually, a perticular field in an IDoc segment needs to be filtered. e.g. I dont want to send idocs with a perticular item category for ORDERS05 IDoc.
Is there any transaction to fulfill the same ? -
Hi,
Iam new to idocs and a functional consultant. I need to know whenever we receive the inbound idocs and if i see the segments of the inbound idoc, do the fields which i see in the segments are the sap fields.????/ for instance if the inbound idoc needs to create a sales order, then the fields of the segments of such an inbound idoc are the normal sap sales order fields ??
do i need to give functional specs to the abapers that whenever the inbound idocs is received the segments fields need to be mapped to sales order fields if such an idoc needs to create a sales order ??
regards
sachinHi Sachin,
Most of the IDoc segment fields are simmilar to SAP transaction fields e.g. most of the ORDERS IDoc segment fields will be simmilar to what you can see in VA01/VA02 screen fields.
Some fields may have different names.
In the case of few segments which may repeate in IDoc with different qualifiers (such as partner details, date segments), fields will be same but different qualifier value decides where these field values will be populated in the Order.
If you are using standard function module to create Order, it will take care of mapping IDoc segment fields to VA01/VA02 screen fields. But if it is a Z function module, then you need to specify the mapping.
Hope this information will help you.
Regards,
Mahesh Pakhale -
How to populate IDOC segments...
Hello Experts,
I was just tasked to add new fields in an IDOC segment. My question is, how do I populate
those newly created fields? The data will be coming from a purchase order.
Thank you guys and take care!Hi,
U cannot edit the existing segment u have to create a zsegment with the fields and then under the main segment u have to add this new segment..also u have create a extended idoc in ur case...then only u can add this new segment..also once u create a segment u have to release it...
u have to write the code in the userexit only...
check the sample code which i have done for my requirement for sales order..
*& Include ZXVEDU02
Program: Function Module:EXIT_SAPLVEDC_002 Creation Date: 12-04-2006 *
Program Type : Outbound IDOC Enhancement *
Program Description:OutBound IDOC Enhancement *
Modification ID:001 *
Date : 25-05-2006 *
Description : 1.The sales organization master data needs to be sent as supplier party
details.New segment ZZSALORG is created and attached to the parent
segment E1EDK01
2.Data required to be sent are:
1.NAME1- Sales organization name
2.STRAS- Address
3.TELFX- Fax number
4.TELF1- phone number.
3.ZZSALORG is filled with the above information.
Modification ID:002 *
Date : 09-06-2006 *
Description : A new field zstceg added to the segment zzdochdr and it was populated *
by selecting stceg field from Kna1 table *
Modification ID:001 *
Date : 15-06-2006 *
Description : 1.New segment ZZE1EDP01 is created and attached to the parent segment E1EDP01
2.Data required to be sent are:
1.POSEX- Item number
2.UEBTO- Overdelivery tolerance
3.UNTTO- Underdelivery tolerance
3.ZZE1EDP01 is filled with the above information.
*-- Data Declaration--
*-- Constant Declaration--
CONSTANTS: c_1(1) TYPE c VALUE '1',
c_langu LIKE t005t-spras VALUE 'E',
c_parvw LIKE vbpa-parvw VALUE 'RG',
c_e1edk01(7) TYPE c VALUE 'E1EDK01',
c_e1edk02(7) TYPE c VALUE 'E1EDK02',
c_e1edk17(7) TYPE c VALUE 'E1EDK17',
c_e1edka1(7) TYPE c VALUE 'E1EDKA1',
c_e1edk14(7) TYPE c VALUE 'E1EDK14',
c_004(3) TYPE c VALUE '004',
c_001(3) TYPE c VALUE '001',
c_002(3) TYPE c VALUE '002',
c_re(2) TYPE c VALUE 'RE',
c_we(2) TYPE c VALUE 'WE',
c_ag(2) TYPE c VALUE 'AG',
c_0010(4) TYPE c VALUE '0010',
c_zzdochdr(8) TYPE c VALUE 'ZZDOCHDR',
c_ze1edk02(8) TYPE c VALUE 'ZE1EDK02',
c_zze1edk17(9) TYPE c VALUE 'ZZE1EDK17',
c_zze1edka1(9) TYPE c VALUE 'ZZE1EDKA1',
c_pe(2) TYPE c VALUE 'PE',
c_y(1) TYPE c VALUE 'Y',
c_zze1email(9) TYPE c VALUE 'ZZE1EMAIL',
c_zzsalorg(8) TYPE c VALUE 'ZZSALORG',
c_zze1edp01(9) TYPE c VALUE 'ZZE1EDP01',
c_e1edp01(7) TYPE c VALUE 'E1EDP01'.
*-- Variables Declaration--
DATA: lv_vbeln LIKE vbak-vbeln,
lv_country LIKE t005t-landx,
lv_text1 LIKE t042z-text1,
lv_vzskz LIKE knb1-vzskz,
lv_inco LIKE tinct-bezei,
lv_cadnr LIKE akkp-cadnr,
lv_pernr LIKE pa0105-pernr,
lv_parvw LIKE tpar-parvw,
lv_adrnr LIKE tvko-adrnr,
lv_zinso LIKE t056z-zinso,
Begin of Mod-002
lv_stceg TYPE stceg.
End of Mod-002
Begin of MOD-003
lv_min_tol TYPE KWMENG,
lv_max_tol TYPE KWMENG.
End Of MOD-003
TYPES:BEGIN OF t_vbfa,
vbelv LIKE vbfa-vbeln,
erdat TYPE erdat,
END OF t_vbfa.
DATA: i_akkp TYPE akkp.
*-- WorkArea Declaration--
DATA : wa_zdochdr TYPE zzdochdr,
wa_ze1edk02 TYPE zze1edk02,
wa_ze1edk17 TYPE zze1edk17,
wa_zze1email TYPE zze1email,
wa_zzsalorg TYPE zzsalorg,
wa_zze1edp01 TYPE zze1edp01,
wa_e1edk02 TYPE e1edk02,
wa_e1edk17 TYPE e1edk17,
wa_e1edka1 TYPE e1edka1,
wa_e1edk01 TYPE e1edk01,
wa_e1edp01 TYPE e1edp01,
wa_adrc TYPE adrc,
wa_pa0105 TYPE pa0105,
wa_zze1edka1 TYPE zze1edka1,
wa_zzdochdr TYPE zzdochdr,
wa_vbfa TYPE t_vbfa,
wa_vbpa TYPE vbpa.
*-- Move data to ZZDOCHDR Segment--
CASE int_edidd-segnam.
WHEN c_e1edk01.
MOVE int_edidd-sdata TO wa_e1edk01.
*--Begin of MOD001+(Modification ID 001)--
*-- Filling of ZZSALORG segment--
SELECT SINGLE adrnr
FROM tvko
INTO lv_adrnr
WHERE vkorg EQ dxvbak-vkorg.
IF sy-subrc EQ 0.
SELECT SINGLE *
FROM adrc
INTO wa_adrc
WHERE addrnumber EQ lv_adrnr.
wa_zzsalorg-salorg = dxvbak-vkorg.
wa_zzsalorg-name1 = wa_adrc-name1.
wa_zzsalorg-name2 = wa_adrc-name2.
wa_zzsalorg-stras = wa_adrc-street.
wa_zzsalorg-telf1 = wa_adrc-tel_number.
wa_zzsalorg-telfx = wa_adrc-fax_number.
wa_zzsalorg-land1 = wa_adrc-country.
wa_zzsalorg-strs2 = wa_adrc-str_suppl1.
wa_zzsalorg-street2 = wa_adrc-str_suppl2.
wa_zzsalorg-street3 = wa_adrc-str_suppl3.
wa_zzsalorg-ort01 = wa_adrc-city1.
wa_zzsalorg-pstlz = wa_adrc-post_code1.
wa_zzsalorg-regio = wa_adrc-region.
int_edidd-segnam = c_zzsalorg.
CLEAR int_edidd-sdata.
MOVE wa_zzsalorg TO int_edidd-sdata.
APPEND int_edidd.
CLEAR: wa_adrc,
wa_zzsalorg.
ENDIF.
*--End of MOD001+(Modification ID 001)--
SELECT SINGLE text1
FROM t042z
INTO lv_text1
WHERE land1 EQ dxvbpa-land1
AND zlsch EQ dxvbkd-zlsch.
READ TABLE dxvbpa INTO wa_vbpa WITH KEY vbeln = dxvbpa-vbeln
parvw = c_parvw.
IF sy-subrc EQ 0.
Begin of Mod-002
SELECT SINGLE stceg
FROM kna1
INTO lv_stceg
WHERE kunnr = wa_vbpa-kunnr.
End of Mod-002
SELECT SINGLE vzskz
FROM knb1
INTO lv_vzskz
WHERE kunnr EQ wa_vbpa-kunnr
AND bukrs EQ dxvbak-bukrs_vf.
IF sy-subrc EQ 0.
SELECT SINGLE zinso
FROM t056z
INTO lv_zinso
WHERE vzskz EQ lv_vzskz
AND waers EQ wa_e1edk01-curcy.
wa_zzdochdr-zdoctitle = dobject-objky.
wa_zzdochdr-zdate = dobject-erdat.
wa_zzdochdr-zmestyp = dobject-kschl.
wa_zzdochdr-zmedium = dobject-nacha.
wa_zzdochdr-zlang = dobject-spras.
wa_zzdochdr-zttype = dxvbkd-kdkg1.
wa_zzdochdr-zpaymethod = dxvbkd-zlsch.
wa_zzdochdr-zpaytext = lv_text1.
wa_zzdochdr-zintonpymt = lv_zinso.
Begin of Mod-002
wa_zzdochdr-zstceg = lv_stceg.
End of Mod-002
int_edidd-segnam = c_zzdochdr.
CLEAR int_edidd-sdata.
MOVE wa_zzdochdr TO int_edidd-sdata.
APPEND int_edidd.
CLEAR : wa_zzdochdr.
ENDIF.
ENDIF.
*-- Move data to ZZE1EDK02 Segment--
WHEN c_e1edk02.
MOVE int_edidd-sdata TO wa_e1edk02.
IF wa_e1edk02-qualf EQ c_004.
SELECT SINGLE vbelv FROM vbfa INTO wa_vbfa
WHERE vbeln EQ lv_vbeln
AND vbtyp_v EQ 'B'.
IF sy-subrc EQ 0.
SELECT SINGLE erdat FROM vbak INTO wa_vbfa
WHERE vbeln EQ wa_vbfa-vbelv.
int_edidd-segnam = c_ze1edk02.
CLEAR int_edidd-sdata.
MOVE wa_vbfa TO int_edidd-sdata.
APPEND int_edidd.
CLEAR wa_vbfa.
ENDIF.
ENDIF. " IF ended for "IF wa_e1edk02-qualf = '004'" condition.
**-- Move data to ZZE1EDK17 Segment--
WHEN c_e1edk17.
MOVE int_edidd-sdata TO wa_e1edk17.
IF NOT dxvbkd-lcnum IS INITIAL.
SELECT SINGLE inco1
inco2
FROM akkp
INTO i_akkp
WHERE lcnum EQ dxvbkd-lcnum.
IF sy-subrc EQ 0.
IF wa_e1edk17-qualf EQ c_001.
wa_ze1edk17-lkond = i_akkp-inco1.
wa_ze1edk17-qualf = wa_e1edk17-qualf.
SELECT SINGLE bezei
FROM tinct
INTO lv_inco
WHERE spras EQ 'E'
AND inco1 EQ i_akkp-inco1.
IF sy-subrc EQ 0.
wa_ze1edk17-lktext = lv_inco.
ENDIF.
ELSEIF wa_e1edk17-qualf EQ c_002.
wa_ze1edk17-qualf = wa_e1edk17-qualf.
wa_ze1edk17-lktext = i_akkp-inco2.
ELSE.
ENDIF.
int_edidd-segnam = c_zze1edk17.
CLEAR int_edidd-sdata.
MOVE wa_ze1edk17 TO int_edidd-sdata.
APPEND int_edidd.
CLEAR wa_ze1edk17.
ENDIF.
ENDIF. " IF ended for not initial condition.
*--Move data to zze1edka1 Segment--
WHEN c_e1edka1.
MOVE int_edidd-sdata TO wa_e1edka1.
*--Checking the wa_e1edka1-parvw field for 'RE'--
IF wa_e1edka1-parvw EQ c_re.
IF NOT dxvbkd-lcnum IS INITIAL.
SELECT SINGLE cadnr
FROM akkp
INTO lv_cadnr
WHERE lcnum EQ dxvbkd-lcnum.
IF sy-subrc EQ 0.
SELECT SINGLE *
FROM adrc
INTO wa_adrc
WHERE addrnumber EQ lv_cadnr.
wa_zze1edka1-parvw = wa_e1edka1-parvw.
wa_zze1edka1-partn = wa_e1edka1-partn.
wa_zze1edka1-land1 = wa_adrc-country.
wa_zze1edka1-name1 = wa_adrc-name1.
wa_zze1edka1-name2 = wa_adrc-name2.
wa_zze1edka1-stras = wa_adrc-street.
wa_zze1edka1-strs2 = wa_adrc-str_suppl1.
wa_zze1edka1-ort01 = wa_adrc-city1.
wa_zze1edka1-pstlz = wa_adrc-post_code1.
wa_zze1edka1-regio = wa_adrc-region.
int_edidd-segnam = c_zze1edka1.
CLEAR int_edidd-sdata.
MOVE wa_zze1edka1 TO int_edidd-sdata.
APPEND int_edidd.
CLEAR: wa_adrc,
wa_zze1edka1.
ENDIF.
ENDIF.
ENDIF. " IF ended for "IF wa_e1edka1-parvw EQ 'RE'" condition.
*--Checking the wa_e1edka1-parvw field for 'WE'--
IF wa_e1edka1-parvw EQ c_we.
IF NOT dxvbkd-lcnum IS INITIAL.
SELECT SINGLE cadnr
FROM akkp
INTO lv_cadnr
WHERE lcnum EQ dxvbkd-lcnum.
IF sy-subrc EQ 0.
SELECT SINGLE *
FROM adrc
INTO wa_adrc
WHERE addrnumber EQ lv_cadnr.
wa_zze1edka1-parvw = wa_e1edka1-parvw.
wa_zze1edka1-partn = wa_e1edka1-partn.
wa_zze1edka1-land1 = wa_adrc-country.
wa_zze1edka1-name1 = wa_adrc-name1.
wa_zze1edka1-name2 = wa_adrc-name2.
wa_zze1edka1-stras = wa_adrc-street.
wa_zze1edka1-strs2 = wa_adrc-str_suppl1.
wa_zze1edka1-ort01 = wa_adrc-city1.
wa_zze1edka1-pstlz = wa_adrc-post_code1.
wa_zze1edka1-regio = wa_adrc-region.
int_edidd-segnam = c_zze1edka1.
CLEAR int_edidd-sdata.
MOVE wa_zze1edka1 TO int_edidd-sdata.
APPEND int_edidd.
CLEAR: wa_adrc,
wa_zze1edka1.
ENDIF.
ENDIF.
ENDIF. " IF ended for "IF wa_e1edka1-parvw EQ 'WE'" condition.
*--Checking the wa_e1edka1-parvw field for 'AG'--
IF wa_e1edka1-parvw EQ c_ag.
IF NOT dxvbkd-lcnum IS INITIAL.
SELECT SINGLE cadnr
FROM akkp
INTO lv_cadnr
WHERE lcnum EQ dxvbkd-lcnum.
IF sy-subrc EQ 0.
SELECT SINGLE *
FROM adrc
INTO wa_adrc
WHERE addrnumber EQ lv_cadnr.
wa_zze1edka1-parvw = wa_e1edka1-parvw.
wa_zze1edka1-partn = wa_e1edka1-partn.
wa_zze1edka1-land1 = wa_adrc-country.
wa_zze1edka1-name1 = wa_adrc-name1.
wa_zze1edka1-name2 = wa_adrc-name2.
wa_zze1edka1-stras = wa_adrc-street.
wa_zze1edka1-strs2 = wa_adrc-str_suppl1.
wa_zze1edka1-ort01 = wa_adrc-city1.
wa_zze1edka1-pstlz = wa_adrc-post_code1.
wa_zze1edka1-regio = wa_adrc-region.
int_edidd-segnam = c_zze1edka1.
CLEAR int_edidd-sdata.
MOVE wa_zze1edka1 TO int_edidd-sdata.
APPEND int_edidd.
CLEAR: wa_adrc,
wa_zze1edka1.
ENDIF.
ENDIF. " IF ended for "IF NOT dxvbkd-lcnum IS INITIAL" condition.
ENDIF. " IF ended for "IF wa_e1edka1-parvw EQ c_ag" condition.
*--Checking the wa_e1edka1-parvw field for 'Y'--
IF wa_e1edka1-parvw+0(1) EQ c_y.
SELECT SINGLE parvw
FROM tpar
INTO lv_parvw
WHERE parvw EQ wa_e1edka1-parvw
AND nrart EQ c_pe.
IF sy-subrc EQ 0.
SELECT SINGLE pernr
FROM vbpa
INTO lv_pernr
WHERE vbeln EQ dxvbpa-vbeln
AND parvw EQ lv_parvw.
IF sy-subrc EQ 0.
SELECT SINGLE usrid_long
FROM pa0105
INTO wa_pa0105-usrid_long
WHERE pernr EQ lv_pernr
AND usrty EQ c_0010. " communication type email
wa_zze1email-zparvw = wa_e1edka1-parvw.
wa_zze1email-zname = wa_e1edka1-name1.
wa_zze1email-zemail = wa_pa0105-usrid_long.
int_edidd-segnam = c_zze1email.
CLEAR int_edidd-sdata.
MOVE wa_zze1email TO int_edidd-sdata.
APPEND int_edidd.
CLEAR: wa_adrc,
wa_zze1email,
wa_pa0105.
ENDIF.
ENDIF.
ENDIF. " IF ended for "IF wa_e1edka1-parvw EQ 'Y'" condition.
*--Begin of MOD003 (Modification ID 003)--
*-- Move data to ZZE1EDP01 Segment--
WHEN c_e1edp01.
MOVE int_edidd-sdata TO wa_e1edp01.
wa_zze1edp01-posex = wa_e1edp01-posex.
wa_zze1edp01-uebto = dxvbap-kwmeng + ( dxvbap-kwmeng * dxvbap-uebto / 100 ).
wa_zze1edp01-untto = dxvbap-kwmeng - ( dxvbap-kwmeng * dxvbap-untto / 100 ).
wa_zze1edp01-uebto = dxvbap-uebto.
wa_zze1edp01-untto = dxvbap-untto.
int_edidd-segnam = c_zze1edp01.
CLEAR int_edidd-sdata.
MOVE wa_zze1edp01 TO int_edidd-sdata.
APPEND int_edidd.
CLEAR: wa_zze1edp01.
*--End of MOD003 (Modification ID 003)--
WHEN OTHERS.
ENDCASE.
Regards,
Nagaraj -
IDOC Segments for an External FI system
Hi,
Can someone please tell me the IDoc segments (need structure) that are used to bring data into SAP from an external FI system.
Thanks
SalimHi,
As for as i know EANs are not relevant to unit conversion. This is a number which uniquely identifies a material for a particular UoM.
And regarding the numerator and denominator, check whether any logic is added in the corresponding segment which overwrites the value -
Chanding the content in an IDOC segment at runtime
Hi Experts,
I have funny issue with modification of the data in an IDOC segment. Below is the description of the issue:
I am using the IDoc type FIDCC2.FIDCCP02. I have to populate the value for field 'KTOSL' of the
segment E1FISEG. I wrote the logic in user exit EXIT_SAPLF050_006. It is getting triggered and the
logic is updating the values in the IDOC_DATA internal table properly.
When the IDoc is generated, I observed that the value for this field is not updated in IDoc Segment.
Could you please suggest where I went wrong.
RamanaHi Neha,
Thank you for the responce.
We need not to fill all the 21 fields before the field KTOSL. Because I was using the work area to modify the internal table based on the index.
One thing I can conclude is that we cannot change the values in the standard segments of a stanrd Idoc type. By the time you enter in the processing Functinal Module, the Idoc number would have been generated. So the modification we carry out are just updating the internal table which of no effect. The right way is that find the place where the values getting updated to the data base and change values as required. These changed values can be founf in the data base but not in the IDoc generated.
Neha one more query for the clarification,could you ever delt with the down payment requests through IDocs. If so please share the details.
Ramana -
Inbound Invoice idoc segment feilds mapping to SAP feilds
Hi,
Could you please help me to find out the tables and feilds in SAP for the inbound invoice idoc type INVOIC01. I need to map the idoc segment fields with SAP fields and respective tables.
Thanks in Advance
SatishHi Satish,
That's quite a big case to get such mapping - why would you need it really? You can process Idoc with std process codes and you will see the std mapping then happening.
You can also go through logic of processing modules:
Function Module Name Short text for function module
IDOC_INPUT_INVOIC_FI EDI: Invoice Receipt (INVOICE)
IDOC_INPUT_INVOIC_MM EDI: Invoice Receipt (INVOICE)
IDOC_INPUT_INVOIC_MRM
For sure you will get RBKP for header, RSEG for items, RBTX for taxes and some more, depending on what you get in the invoice and what are your booking and matching processes.
Best Regards,
Tomek -
Concatenating texts from multiple IDoc segments
Hi everybody!
I have to concatenate log texts supplied via IDoc segments into one string. There can be zero or more segments, each with one line of the long text. The result should be one single string field filled with all the lines concatenated.
What's the easiest way to achieve this result? Do I need a user-defined function or can I code this using standard built-in funtions (this solution would be preferred)?
Regards,
JoergUse the UDF with the following logic.
Take the input type as Queue of the Segments
Concatenate the temp = temp + a<i> in the loop
return the temp.
<b>UDF as follows:</b>
String temp = " ";
for(int i=0; i< a.lenght; i++)
temp = temp + a<i>
return temp;
Your probelm will solve with the above UDF.
Warm Regards,
Vijay
Maybe you are looking for
-
HP Officejet Pro L7590 printer auto document feeder stopped working
HP Officejet Pro L7590 (Model: CB822A) Mac OS X Yosemite 10.10 My automatic document feeder stopped working about a month or two ago. If I put a bunch of papers under the tray there is no beep/light to acknowledge that. So, I can't copy a bunch of pa
-
Windows 8.1 wont release dead wi-fi profiles - will actually use them - Ghost profiles
Serious bug in both Windows 8.1 and Windows Phone wifi profiles if you change routers/names I have 3 Laptops and 2 Windows Phones running at home. All laptops on 8.1 , Windows Phone current. They were attached to a Netgear Router with router access n
-
Oc 11gR1 update 3: doesn't show ZFS file systems created on brownfield zone
Subject is a pretty concise description here. I have several brownfield Solaris 10U10 containers running on M5000s, and I have delegated three zpool to each container for use by Oracle. Below is relevant output from zonecfg export for one of these co
-
Issue with Selection Listener when the table has only one row
Hi All , I have developed a table in which I am using Selection Listener to perform some task when any row is selected. It is working fine when I have more than 1 row in the table, but when I have only one row in the table , the selection listener do
-
Lenovo s8-50LC Wifi Freezing Error
This is to request you all that I have Lenovo S8-50LC tablet but a strange problem I am facing its wifi searching capacity is poor and if its not there it stops recognising the wifi singals. then need to restart everytime to re activate the same.. Pl