IDOC sending on sales order creation

Hi,
When Sales order created, an idoc generated and sent to MII system.
If MII system is shutdown, idoc is not preserved in SAP ECC system.
We want SAP ECC system must preserve IDOC on MII disconnection and send it to MII when connection established.
How can we achieve preserve IDOC and send when connection established?
Thanks.

Hi,
What is middle ware system to transmit the IDoc from SAP to MII, you can ask to middle ware system to retain the IDoc file with them until MII system will be up.
As I know In SAP it is not possible from standard way to check if MII system is down, there would be no Idoc will be transmitted, but you can write an code in IDoc transition FM module with help of ABAPer as to check the RFC connection with MII is down don't transmit the IDoc, and wait until the MII RFC connection is up.
You can control this by background job by assigning you special program, which will check the connection with MII and then transmit the IDocs.
regards
Vivek.

Similar Messages

  • How to trigger an Idoc from Sales order creation and change

    We are trying to trigger Idoc from sales order creation and change we have done following setting mentioned below:
    Follow the below steps:
    1. Go to NACE transaction
    2. Select V1 application and select OUTPUT TYPES
    3. Select the required output type and double click on Processing routines.
    4. Enter Medium as DISTRIBUTION ALE, Program as RSNASTED and Routine as ALE_PROCESSING.
    5. Save it.
    message type ORDERSP in the distribution model (BD64).
    Follow the below steps to configure the condition records:
    1. Go to NACE
    2. Select V1 application and select CONDITION RECORDS
    3. Select the requred output type and click on Condition records
    4. Selection screen will be displayed.
    5. Go for execution. In that screen enter the selection criteria. For eg Condition record is based on Sales document type. Then
    Sales doc type = OR
    Funt = SP
    Partner = blank. It means there is no restriction on partner numbers.
    Medium = A
    date/time = 4
    Lan = EN.
    Note: partner is left blank means, the sales order of type OR can be send to all partners.
    6. Save it.
    We also done ALE configuration.
    We are facing problem that from VA02 "No output has been selected for printing Message no. V1102"
    Kindly suggest the solution.
    Regards,
    Sharad Dixit

    Hi ,
    Please check the total error description and diagnosis as below :
    InVa02 enter SO  go to extras->output->Header->edit.You can find a table with all the triggered output types. Choose the output type BA00 with medium Distribution ALE and go for 'Processing log'. It will show you the error description.
    Please paste the diagnosis .
    Thanks and Regards,
    P.Bharadwaj

  • Reg:IDOC -sales order creation

    Hi All,
         I am trying  to create sales order through IDOCS.Basic type is SALESORDER_CREATEFROMDAT201.
    My requirement is to know any user-exits where in I need to add to my code to hardstop sales order creation if the storage location which I am passing is marked for deletion.
    Kindly reply as soon as possible.
    Regards,
    Kaveri

    Hi,
    Check this one it will help u how to enhance the idocs.
    If we wnat to extend the idoc use the segments for adding the fields. use the tcode WE30 and we31.
    Please reward points if it is useful.
    Go through the following Steps For ALE/IDOC
    ALE IDOC
    Sending System(Outbound ALE Process)
    Tcode SALE ? for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 ? Create Model View
    Tcode BD82 ? Generate partner Profiles & Create Ports
    Tcode BD64 ? Distribute the Model view
    Message Type MATMAS
    Tcode BD10 ? Send Material Data
    Tcode WE05 ? Idoc List for watching any Errors
    Receiving System(Inbound ALE )
    Tcode SALE ? for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 ? Check for Model view whether it has distributed or not
    Tcode BD82 -- Generate partner Profiles & Create Ports
    Tcode BD11 Getting Material Data
    Tcode WE05 ? Idoc List for inbound status codes
    ALE IDOC Steps
    Sending System(Outbound ALE Process)
    Tcode SALE ?3 for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 !V Create Model View
    Tcode BD82 !V Generate partner Profiles & Create Ports
    Tcode BD64 !V Distribute the Model view
    This is Receiving system Settings
    Receiving System(Inbound ALE )
    Tcode SALE ?3 for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 !V Check for Model view whether it has distributed or not
    Tcode BD82 -- Generate partner Profiles & Create Ports
    Tcode BD11 Getting Material Data
    Tcode WE05 !V Idoc List for inbound status codes
    Message Type MATMAS
    Tcode BD10 !V Send Material Data
    Tcode WE05 !V Idoc List for watching any Errors
    1)a Goto Tcode SALE
    Click on Sending & Receiving Systems-->Select Logical Systems
    Here Define Logical Systems---> Click on Execute Button
    go for new entries
    1) System Name : ERP000
    Description : Sending System
    2) System Name : ERP800
    Description : Receiving System
    press Enter & Save
    it will ask Request
    if you want new request create new Request orpress continue for transfering the objects
    B) goto Tcode SALE
    Select Assign Client to Logical Systems-->Execute
    000--> Double click on this
    Give the following Information
    Client : ERP 000
    City :
    Logical System
    Currency
    Client role
    Save this Data
    Step 2) For RFC Creation
    Goto Tcode SM59-->Select R/3 Connects
    Click on Create Button
    RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
    give the information for required fields
    RFC Destination : ERP800
    Connection type: 3
    Description
    Target Host : ERP000
    System No:000
    lan : EN
    Client : 800
    User : Login User Name
    Password:
    save this & Test it & RemortLogin
    3)
    Goto Tcode BD64 -- click on Change mode button
    click on create moduleview
    short text : xxxxxxxxxxxxxx
    Technical Neme : MODEL_ALV
    save this & Press ok
    select your just created modelview Name :'MODEL_ALV'.
    goto add message type
    Model Name : MODEL_ALV
    sender : ERP000
    Receiver : ERP800
    Message type :MATMAS
    save & Press Enter
    4) Goto Tcode BD82
    Give Model View : MODEL_ALV
    Partner system : ERP800
    execute this by press F8 Button
    it will gives you sending system port No :A000000015(Like)
    5) Goto Tcode BD64
    seelct the modelview
    goto >edit>modelview-->distribute
    press ok & Press enter
    6)goto Tcode : BD10 for Material sending
    Material : mat_001
    Message Type : MATMAS
    Logical System : ERP800
    and Execute
    7)goto Tcode : BD11 for Material Receiving
    Material : mat_001
    Message Type : MATMAS
    and Execute --> 1 request idoc created for message type Matmas
    press enter
    Here Master Idoc set for Messge type MATMAS-->press Enter
    1 Communication Idoc generated for Message Type
    this is your IDOC
    Change Pointers
    I know how to change the description of a material using ALE Change Pointers.
    I will give the following few steps
    1) Tcode BD61---> check the change pointers activated check box
    save and goback.
    2) Tcode BD50---> check the MATMAS check box save and comeback.
    3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
    4) Tcode BD52---> give message type : matmas press ok button.
    select all what ever you want and delete remaining fields.
    save & come back.
    5) 5) go to Tcode MM02 select one material and try to change the description and save it
    it will effects the target systems material desciption will also changes
    6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
    give Message type : MATMAS and Executte
    ALE/IDOC Status Codes/Messages
    01 Error --> Idoc Added
    30 Error --> Idoc ready for dispatch(ALE Service)
    then goto SE38 --> Execute the Program RBDMIDOC
    29 Error --> ALE Service Layer
    then goto SE38 --> Execute the Program RSEOUT00
    03 Error --> Data Passed to Port ok
    then goto SE38 --> Execute the Program RBDMOIND
    12 Error --> Dispatch ok
    Inbound Status Codes
    50 Error --> It will go for ALE Service Layer
    56 Error --> Idoc with Errors added
    51 Error --> Application Document not posted
    65 Error --> Error in ALE Service Layer
    for 51 or 56 Errors do the following steps
    goto WE19 > give the IDOC Number and Execute>
    Press on Inbound function Module
    for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
    regards,
    satish.

  • Sales order creation -pricing- IDOC processing

    Hi All,
    Issue is related to pricing procedure and condition types while processing the IDOC for sales order creation.
    The condition type ZSTD maintained in the pricing procedure AAAA, has reference condition type as ZZZZ, when we are processing IDOC, system is throwing error as " condition type ZZZZ, is not maintained for A V AAAA.
    This error will not populate when we create the sales order manually.
    Kindly let me know if programs needs to be checked and or any configuration mistakes involved in this.
    Regards,
    SAN

    >
    Vivek Baddula wrote:
    > Hey Teju,
    >
    > Could you pls put me the block of code how you are populating to the idoc edidd. So that we can guide you.
    >
    > And also tell me the message status 51 in IDoc what it is showing , and also see the segment( maybe E2EDP05)  specific  to pricing for the IDoc  you populated.
    >
    > Regards,
    >
    > Vvieks
    >
    > 'Grow and help others to Grow'
    Vivek,
    Thanks for the reply.
    Status 51 reads "condition ZPRL is missing in pricing procedure A V ZPRINT, WE are not passing any value as a part of tsting. The system should pick price values from condtion record.

  • What is the IDOC Basic Type for sales order creation

    Hi Experts,
    Can anyone tell me Idoc Basic type for sales order creation.
    Thanks
    Prashant

    Hi,
    The basic types for creating the order are:
    1.Orders01
    2.Orders02
    3.Orders03
    4.Orders04
    5.Orders05.
    The basic type for SIS order is:
    SISCSO01.
    Regards,
    Krishna.

  • Change Transportation Zone in Sales Order creation

    Hi Gurus,
    I am looking for an user-exit to overwrite the transportation zone for the ship-to party while creating the Sales order.
    Actually the order is getting created thru IDOC. The segment E1EDKA1 with PARVW 'WE' contains all the data including name, street, city, phone etc. But there is no option(field) to send this transporation zone (LZONE). In the sale order creation program, it is automatically picking it up from VBPA for the customer. I need to overwrite this one with a different value. Is there any User-exit available to accomplish?
    For your information its PO-SO process. A KBZI order will be created. Using the PR generated from this order, we need to create the PO that in turns automatically creating an Intercompany Sales Order ( thru IDoc). In this second Sales Order, I need to overwrite the transportation zone based on the initial order.
    Thanks in advance,
    Vijay.

    >
    Murphy wrote:
    > I modified the value at runtime KUVEW-LZONE. But this values is keep on getting modified by XVBPA-LZONE for the customers...
    How about if we modifiy the value of XVBPA-LZONE itself at runtime in Routine either USEREXIT_SAVE_DOCUMENT or USEREXIT_SAVE_DOCUMENT_PREPARE?
    See if the values of KUVEW-LZONE or XVBPA-LZONE in our hand in above exit?

  • Sales order creation, standard event trigger is taking long time .

    We have a requirement where we are sending data to CRM system using RFC function module. This data is sent while sales order creation or change. We have used standard event BUS2032.CREATED to trigger CRM FM in sales order creation mode. In sales order change mode, we are using custom event. In production system, our custom change event is getting triggered fine and data is sent to CRM system with small time lag of around 1 minute. But, while sales order creation, standard event trigger is taking long time ( sometimes about 20 minutes) in production system.
    We tried triggering same custom event at the time of sales order creation using FM u2018SWE_EVENT_CREATE_IN_UPD_TASKu2019 as well but, still we are not able to improve performance of the event trigger at sales order creation.
    Regards,
    Sushee Joshi

    HI,
    we have written SWE_EVENT_CREATE in update task
    I think instead of calling in update task simply call to function module CALL FUNCTION "SWE_EVENT_CREATE" might trigger the event immediately.. Did you try to check in this way..
    OR
    And I also suggest you to check the entry in SWE2 txn with respect to your workflow tempalte, may be you have enable the option ENABLE EVENT QUEUE, this could be one of the reasons.. If it is enabled please disable it (uncheck)
    Please check..
    Regards
    Pavan

  • IDoc Configuration for Production Order Creation and Change

    Hi All,
    Please Help me out for IDoc Configuration for Production Order Creation and Change
    I have found the IDoc for Production Order
    Messgae Type : LOIPRO and IDoc type : LOIPRO01
    Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
    I have done following Configurations:
    1. RFC Destination created for XI system
    2. PORT was created for XI
    3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
    I need to know how to do the followning.
    1. How do i configure the outbound Production order idocs when Production Order is created or changed.
    2. in NACE (Output control) which is the Application for Production Order.
    3. How can I set IDoc as output Type for Production Order Creation.
    Thanks in advance
    Dhanabal T

    Hi Michal,
    I know that it is the old thread but still want to get clarified from you out of curiosity.
    Unlike other IDOC, i actiavated change pointers for LOIPRO
    1.message and idoc type is linked
    2.function module , message type , idoc type is linked
    function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
    3.BD64, distribution model is created and distributed
    4. port and partner profile is in place.
    5. IDOC is not getting generated after creating the process order.
    do we need to activate the change documents for the message type in BD52,
    if yes can you please provide the object types for the same.
    or i am missing something else. please guide me in this regards.
    Thanks in advance for your time.
    S.Janagar

  • Reena Prabhakar - Sales order creation Using BAPI

    Hi Reena,
    This is Dinesh,i also face problem in Sales order creation using BAPI if you can send me the code it would be great help to me.
    Regards,
    Dinesh

    Anyhow, here is the code that I am using currently which works perfectly well. Not sure if it will be of any help to you, since the values to the BAPI come from the Webdynpro application. I have values stored in my "Test data directory" which I use for testing from the backend.
    FUNCTION ztest.
    Call the BAPI to create Sales Order
      CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
        EXPORTING
          order_header_in     = l_order_header
        IMPORTING
          salesdocument       = l_salesdocument
        TABLES
          return              = it_return
          order_items_in      = it_order_items
          order_partners      = it_order_partners
          order_schedules_in  = it_order_schdl
          order_conditions_in = it_order_conditions
          order_text          = it_order_text.
      READ TABLE it_return WITH KEY type = 'E'.
      IF sy-subrc = 0.
    *-- error occured
        CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      ELSE.
    *-- no error
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
      ENDIF.
    ENDFUNCTION.

  • LSMW Sales Order creation using Bapi method

    Hi folks ,
    iam doing Lsmw bapimethod ,sales order creation .In the step start idoc processing iam getting error "Has Not been Accepted for Processing ",why iam not getting plz let me know points will be awarded for all answers .

    Hi,
              You need to set the IDOC settings in the initial LSMW screen. It will be there in menu path.
           Award points if helpful
    Regards,
    RamaKrishna C

  • SALES order creation using BAPI's

    Hai to all,
    I want to create sales order using bapis .I am new to this topic could any body guide me how to create sales order  step by step process using bapis.
    Thanks in advance.
    Regards,
    Chaitanya

    **　プログラムＩＤ　　　　　　 ： ZBAPI_SALESORDER_CREATE               *
    **　プログラム名称　　    　　 ： Upload Sales Order Creation                   *
    **　処理概要　　　　　　　   　：                                       *
    **　作成者　　　　　　　　　　 ： Karthik.P                             *
    **　作成日　　　　　　　　　　 ： 2006/08/10                            *
    REPORT  ZBAPI_SALESORDER_CREATE LINE-SIZE 132 MESSAGE-ID ZMMBAPI .
           Internal table definition                                     *
    ****<<<<<Communication Fields: Sales and Distribution Document Header>>>>>>>>
    DATA: GT_ORDER_HEADER_IN LIKE BAPISDHD1,
    *******<<<Checkbox Fields for Sales and Distribution Document Header>>>>>>>>>
          GT_ORDER_HEADER_INX  LIKE    BAPISDHD1X,
    *****<<<<<Return Parameter>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
          GT_RETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE,  " Return Messages
    *********<<<Communication Fields: Sales and Distribution Document Item<>>>>>
          GT_ORDER_ITEMS_IN LIKE BAPISDITM OCCURS 0 WITH HEADER LINE, " Item Data
    *********<<<Communication Fields: Sales and Distribution Document Item>>>>>>>
          GT_ORDER_ITEMS_INX LIKE BAPISDITMX OCCURS 0 WITH HEADER LINE, "Item Data Checkbox
    *********<<<Communication Fields: Sales and Distribution Document Item>>>>>>>
          GT_SALESDOCUMENT LIKE BAPIVBELN-VBELN , "Number of Generated Document
    *********<<<Communications Fields: SD Document Partner: WWW>>>>>>>>>>>>>>>>>>
          GT_ORDER_PARTNERS  LIKE BAPIPARNR OCCURS 0 WITH HEADER LINE, "Document Partner
    ********<<<<Communications Fields: SD Document Partner: WWW>>>>>>>>>>>>>>>>>>
          GT_ORDER_SCHEDULES_IN LIKE BAPISCHDL OCCURS 0 WITH HEADER LINE, "Schedule Line Data
    ****<<<<<<<<Checkbox List for Maintaining Sales Document Schedule Line>>>>>>>>
          GT_ORDER_SCHEDULES_INX LIKE BAPISCHDLX OCCURS 0 WITH HEADER LINE, " Checkbox Schedule Line Data
    *******Communication Fields for Maintaining Conditions in the Order
          GT_ORDER_CONDITIONS_IN  LIKE BAPICOND OCCURS 0 WITH HEADER LINE,
    ******Communication Fields for Maintaining Conditions in the Order
          GT_ORDER_CONDITIONS_INX LIKE BAPICONDX OCCURS 0 WITH HEADER LINE.
           Data definition                                               *
    DATA:  BEGIN OF GT_FT_SALES OCCURS 0,
           DOC_TYPE(4)  ,        "Sales Document Type
           SALES_ORG(4) ,        "Sales Organization
           DISTR_CHAN(2)  ,      "Distribution Channel
           DIVISION(2)   ,       "DIVISION(2)
           SALES_DIST(6)  ,      "Sales district
           INCOTERMS1(3)  ,      "Incoterms (part 1)
           INCOTERMS2(28)  ,     "Incoterms (part 2)
           PMNTTRMS(4)  ,        "Terms of payment key
           PRICE_DATE(8) ,       "Date for pricing and exchange rate
           PURCH_NO_C(35)  ,     "Customer purchase order number
           PURCH_NO_S(35)  ,     "Ship-to Party's Purchase Order Number
           EXCHG_RATE(8)  ,      "Directly quoted exchange rate for pricing and statistics
           CURRENCY(5) ,         "SD document currency
           MATERIAL(18),         "MATERIAL
           TARGET_QTY(13)  ,     "Target quantity in sales units
           ITEM_CATEG(4)  ,      "Sales document item category
           MATL_GROUP(8)  ,      "Material Group
           PURCH_NO_C1(35),      "Customer purchase order number
           SALES_DIST1(6)  ,     "Sales district
           INCOTERMS11(3)  ,     "Incoterms (part 1)
           INCOTERMS21(28),     "Incoterms (part 2)
           PMNTTRMS1(4)  ,     "Terms of payment key
           EXCHG_RATE1(8) ,    "Directly quoted exchange rate for pricing and statistics
           PRICE_DATE1(8) ,    "Date for pricing and exchange rate
           TRG_QTY_NO(5)    , "Factor for converting sales units to base units (target qty)
           DIVISION1(2)     ,                                   "DIVISION1
           SALQTYNUM(5)     , "Numerator (factor) for conversion of sales quantity into SKU
           GROSS_WGHT(3)    , "Gross Weight of the Item
           NET_WEIGHT(15)    , "Net Weight of the Item
           UNTOF_WGHT(3)    ,"Weight Unit
           PARTN_ROLE(2)   ,"Partner function
           PARTN_NUMB(10)   ,"Customer Number 1
    ********<<<<Communications Fields: SD Document Partner: WWW>>>>>>>>>>>>>>>>>>
           ITM_NUMBER(6) ,"Item number of the SD document
           REQ_QTY(8)  , "Schedule line date
           DLV_DATE(8)  , "Schedule line date
           MS_DATE(8)  , "Material availability date
           LOAD_DATE(8) , "Loading time (local time with reference to a shipping point)
           GI_DATE(8), "Time of goods issue (local DATE, with reference to a plant)
           TP_DATE(8)  , "Transportation planning -time (local w/ref. to shipping pnt)
           ITM_NUMBER2(6) , "Condition item number
    END OF GT_FT_SALES,
           MSG(240) TYPE  C,  " Return Message
           E_REC(8) TYPE C,    " Error Records Counter
           REC_NO(8) TYPE C, " Records Number Indicator
           S_REC(8) TYPE C,   " Successful Records Counter
           T_REC(8) TYPE C.   " Total Records Counter
    selection block for EXCEL UPLOAD FILE>>>>>>>>>>>>>>>>>>>>>>>>
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
      PARAMETERS FILE TYPE  IBIPPARMS-PATH OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK B1.
    *<<<<AT SELECTION-SCREEN ON VALUE-REQUEST FOR FILE .>>>>>>>>>>>>
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR FILE .
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          PROGRAM_NAME  = SYST-CPROG
          DYNPRO_NUMBER = SYST-DYNNR
        IMPORTING
          FILE_NAME     = FILE.
    **<<<<<<<<<<<<<<<<<START-OF-SELECTION.>>>>>>>>>>>>>>>>>>>>>>>>>>>
    START-OF-SELECTION.
      CALL FUNCTION 'WS_UPLOAD'                                 "#EC *
        EXPORTING
          FILENAME                = FILE
          FILETYPE                = 'DAT'
        TABLES
          DATA_TAB                = GT_FT_SALES
        EXCEPTIONS
          CONVERSION_ERROR        = 1
          FILE_OPEN_ERROR         = 2
          FILE_READ_ERROR         = 3
          INVALID_TYPE            = 4
          NO_BATCH                = 5
          UNKNOWN_ERROR           = 6
          INVALID_TABLE_WIDTH     = 7
          GUI_REFUSE_FILETRANSFER = 8
          CUSTOMER_ERROR          = 9
          NO_AUTHORITY            = 10
          OTHERS                  = 11.
      IF  SY-SUBRC <> 0  .
        MESSAGE E000.
      ENDIF.
      SKIP 3.
      FORMAT COLOR COL_HEADING INVERSE ON.
        WRITE 40 TEXT-001.
      FORMAT COLOR COL_HEADING INVERSE OFF.
      SKIP 1.
      FORMAT COLOR COL_NEGATIVE INVERSE ON.
        WRITE :/ TEXT-002, 13 SY-MANDT , 104 TEXT-003, 111 SY-UNAME,
                  / TEXT-004, 13 SY-DATUM , 104 TEXT-005, 111 SY-UZEIT.
      FORMAT COLOR COL_NEGATIVE INVERSE OFF.
      SKIP 3.
      LOOP AT GT_FT_SALES.
          PERFORM SLALE_UPLOAD_DATA.
      ENDLOOP.
      T_REC = E_REC + S_REC.
      SKIP 3.
      FORMAT COLOR COL_TOTAL INVERSE ON.
        WRITE: /38 TEXT-007, T_REC.
      FORMAT COLOR COL_TOTAL INVERSE OFF.
      FORMAT COLOR COL_NEGATIVE INVERSE ON.
        WRITE: /38 TEXT-008, E_REC.
      FORMAT COLOR COL_NEGATIVE INVERSE OFF.
      FORMAT COLOR COL_TOTAL INVERSE ON.
        WRITE: /38 TEXT-009, S_REC.
      FORMAT COLOR COL_TOTAL INVERSE OFF.
    *&      Form  SLALE_UPLOAD_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM SLALE_UPLOAD_DATA .
    *******<<<<<<<<<<Communication Fields: Sales and Distribution Document Header>>>>>>
        GT_ORDER_HEADER_IN-DOC_TYPE =    'TA'.
        GT_ORDER_HEADER_IN-SALES_ORG =  GT_FT_SALES-SALES_ORG . "'0001'
        GT_ORDER_HEADER_IN-DISTR_CHAN = GT_FT_SALES-DISTR_CHAN. "'01'
        GT_ORDER_HEADER_IN-DIVISION  =   GT_FT_SALES-DIVISION.  " '01'
        GT_ORDER_HEADER_IN-SALES_DIST = GT_FT_SALES-SALES_DIST ."'000001'
        GT_ORDER_HEADER_IN-INCOTERMS1 = GT_FT_SALES-INCOTERMS1.  "'CFR'
        GT_ORDER_HEADER_IN-INCOTERMS2 = GT_FT_SALES-INCOTERMS2 . "'HAMBURG'
        GT_ORDER_HEADER_IN-PMNTTRMS = GT_FT_SALES-PMNTTRMS .    "'0001'
        GT_ORDER_HEADER_IN-PRICE_DATE = GT_FT_SALES-PRICE_DATE ."'20060818'
        GT_ORDER_HEADER_IN-PURCH_NO_C =  '32'.
        GT_ORDER_HEADER_IN-PURCH_NO_S =   '32'.
        GT_ORDER_HEADER_IN-EXCHG_RATE =  GT_FT_SALES-EXCHG_RATE ."'1.00000'
        GT_ORDER_HEADER_IN-CURRENCY = GT_FT_SALES-CURRENCY . " 'EUR'
    ********<<<Checkbox Fields for Sales and Distribution Document Header>>>>>>>>>
        GT_ORDER_HEADER_INX-DOC_TYPE   = 'X'.
        GT_ORDER_HEADER_INX-SALES_ORG  = 'X'.
        GT_ORDER_HEADER_INX-DISTR_CHAN = 'X'.
        GT_ORDER_HEADER_INX-DIVISION   = 'X'.
        GT_ORDER_HEADER_INX-SALES_DIST = 'X'.
        GT_ORDER_HEADER_INX-INCOTERMS1 = 'X'.
        GT_ORDER_HEADER_INX-INCOTERMS2 = 'X'.
        GT_ORDER_HEADER_INX-PMNTTRMS =   'X'.
        GT_ORDER_HEADER_INX-PRICE_DATE = 'X'.
        GT_ORDER_HEADER_INX-PURCH_NO_C = 'X'.
        GT_ORDER_HEADER_INX-PURCH_NO_S = 'X'.
        GT_ORDER_HEADER_INX-EXCHG_RATE =  'X'.
        GT_ORDER_HEADER_INX-CURRENCY = 'X'.
    *****<<<<<<Communication Fields: Sales and Distribution Document Item>>>
        GT_ORDER_ITEMS_IN-ITM_NUMBER = '000010'.
        GT_ORDER_ITEMS_IN-MATERIAL  =  GT_FT_SALES-MATERIAL .
        GT_ORDER_ITEMS_IN-PO_ITM_NO = '32'.
        GT_ORDER_ITEMS_IN-CUST_MAT22 = 'AGNI-IV'.
        GT_ORDER_ITEMS_IN-BILL_DATE = '20060808'.
        GT_ORDER_ITEMS_IN-PLANT = '0001'.
    *GT_ORDER_ITEMS_IN-STORE_LOC = '0001'.
        GT_ORDER_ITEMS_IN-TARGET_QTY = GT_FT_SALES-TARGET_QTY . "'1000'
        GT_ORDER_ITEMS_IN-ITEM_CATEG = GT_FT_SALES-ITEM_CATEG . "'TAN'
        GT_ORDER_ITEMS_IN-MATL_GROUP = GT_FT_SALES-MATL_GROUP . "'01'
        GT_ORDER_ITEMS_IN-PURCH_NO_C = GT_FT_SALES-PURCH_NO_C . "'32'
        GT_ORDER_ITEMS_IN-SALES_DIST = GT_FT_SALES-SALES_DIST . "'000001'
        GT_ORDER_ITEMS_IN-INCOTERMS1 = GT_FT_SALES-INCOTERMS1 . "'CFR'
        GT_ORDER_ITEMS_IN-INCOTERMS2 = GT_FT_SALES-INCOTERMS2 . "'HAMBURG'
        GT_ORDER_ITEMS_IN-PMNTTRMS = GT_FT_SALES-PMNTTRMS  .    "'0001'.
        GT_ORDER_ITEMS_IN-EXCHG_RATE = GT_FT_SALES-EXCHG_RATE . "'1.00000'
        GT_ORDER_ITEMS_IN-PRICE_DATE = GT_FT_SALES-PRICE_DATE . "'20060808'
    *GT_ORDER_ITEMS_IN-SALES_UNIT = 'DZ'.
        GT_ORDER_ITEMS_IN-TRG_QTY_NO = GT_FT_SALES-TRG_QTY_NO . "'23'
        GT_ORDER_ITEMS_IN-DIVISION = GT_FT_SALES-DIVISION   .   "'01'
        GT_ORDER_ITEMS_IN-SALQTYNUM = GT_FT_SALES-SALQTYNUM .   "'32'
        GT_ORDER_ITEMS_IN-GROSS_WGHT = GT_FT_SALES-GROSS_WGHT.  " ' 25272000'
        GT_ORDER_ITEMS_IN-NET_WEIGHT = GT_FT_SALES-NET_WEIGHT.  "'24464000'
        GT_ORDER_ITEMS_IN-UNTOF_WGHT = GT_FT_SALES-UNTOF_WGHT . " 'KG'
    *GT_ORDER_ITEMS_IN-CURRENCY = 'EUR'.
        APPEND  GT_ORDER_ITEMS_IN.
    ****<<<<<<Communication Fields: Sales and Distribution Document Item>>>
        GT_ORDER_ITEMS_INX-ITM_NUMBER = '000010'.
        GT_ORDER_ITEMS_INX-MATERIAL = 'X'.
    *GT_ORDER_ITEMS_INX-PO_ITM_NO = 'X'.
        GT_ORDER_ITEMS_INX-CUST_MAT22 = 'X'.
        GT_ORDER_ITEMS_INX-BILL_DATE = 'X'.
        GT_ORDER_ITEMS_INX-PLANT = 'X'.
    *GT_ORDER_ITEMS_INX-STORE_LOC = 'X'.
        GT_ORDER_ITEMS_INX-TARGET_QTY = 'X'.
        GT_ORDER_ITEMS_INX-ITEM_CATEG = 'X'.
        GT_ORDER_ITEMS_INX-MATL_GROUP = 'X'.
        GT_ORDER_ITEMS_INX-PURCH_NO_C = 'X'.
        GT_ORDER_ITEMS_INX-SALES_DIST = 'X'.
        GT_ORDER_ITEMS_INX-INCOTERMS1 = 'X'.
        GT_ORDER_ITEMS_INX-INCOTERMS2 = 'X'.
        GT_ORDER_ITEMS_INX-PMNTTRMS = 'X'.
        GT_ORDER_ITEMS_INX-EXCHG_RATE = 'X'.
        GT_ORDER_ITEMS_INX-PRICE_DATE = 'X'.
    *GT_ORDER_ITEMS_INX-SALES_UNIT = 'X'.
        GT_ORDER_ITEMS_INX-TRG_QTY_NO = 'X'.
        GT_ORDER_ITEMS_INX-DIVISION = 'X'.
        GT_ORDER_ITEMS_INX-SALQTYNUM = 'X'.
        GT_ORDER_ITEMS_INX-GROSS_WGHT =  'X'.
        GT_ORDER_ITEMS_INX-NET_WEIGHT = 'X'.
        GT_ORDER_ITEMS_INX-UNTOF_WGHT = 'X'.
    *GT_ORDER_ITEMS_IN-CURRENCY = 'x'.
        APPEND  GT_ORDER_ITEMS_INX.
    *****<<<<<<Communications Fields: SD Document Partner: WWW
        GT_ORDER_PARTNERS-PARTN_ROLE =   'WE'.
        GT_ORDER_PARTNERS-PARTN_NUMB =  '0000000057'.
    ***GT_ORDER_PARTNERS-ITM_NUMBER = GT_FT_SALES-ITM_NUMBER . " '000010'.
        APPEND  GT_ORDER_PARTNERS.
    *********<<<<Communications Fields: SD Document Partner: WWW>>>>>>>>>>>>>>>>>>
        GT_ORDER_SCHEDULES_IN-ITM_NUMBER = GT_FT_SALES-ITM_NUMBER." '000010'
        GT_ORDER_SCHEDULES_IN-REQ_QTY = GT_FT_SALES-REQ_QTY .   "'234'
        GT_ORDER_SCHEDULES_IN-DLV_DATE = GT_FT_SALES-DLV_DATE  ."  '20060824'.
        GT_ORDER_SCHEDULES_IN-MS_DATE =  GT_FT_SALES-MS_DATE .  "'20060808'
        GT_ORDER_SCHEDULES_IN-LOAD_DATE = GT_FT_SALES-LOAD_DATE.  " '20060822'
        GT_ORDER_SCHEDULES_IN-GI_DATE = GT_FT_SALES-GI_DATE . " '20060823'
        GT_ORDER_SCHEDULES_IN-TP_DATE = GT_FT_SALES-TP_DATE .   "'20060821'
        APPEND  gt_ORDER_SCHEDULES_IN.
    *********<<<<Communications Fields: SD Document Partner: WWW FLAG>>>>>>>>>>>>>>>>>>
        GT_ORDER_SCHEDULES_INX-ITM_NUMBER = '000010'.
        GT_ORDER_SCHEDULES_INX-REQ_QTY = 'X'.
        GT_ORDER_SCHEDULES_INX-DLV_DATE = 'X'.
        GT_ORDER_SCHEDULES_INX-MS_DATE = 'X'.
        GT_ORDER_SCHEDULES_INX-LOAD_DATE = 'X'.
        GT_ORDER_SCHEDULES_INX-GI_DATE = 'X'.
        GT_ORDER_SCHEDULES_INX-DLV_DATE = 'X'.
        APPEND  gt_ORDER_SCHEDULES_INX.
    ********Communication Fields for Maintaining Conditions in the Order
        GT_ORDER_CONDITIONS_IN-ITM_NUMBER = GT_FT_SALES-ITM_NUMBER ." '000010'
        APPEND GT_ORDER_CONDITIONS_IN.
    ***Communication Fields for Maintaining Conditions in the Order
        GT_ORDER_CONDITIONS_INX-ITM_NUMBER = '000010'.
        APPEND GT_ORDER_CONDITIONS_INX.
        CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
          EXPORTING
       SALESDOCUMENTIN               =
            ORDER_HEADER_IN               = GT_ORDER_HEADER_IN
            ORDER_HEADER_INX              = GT_ORDER_HEADER_INX
      SENDER                        =
      BINARY_RELATIONSHIPTYPE       =
      INT_NUMBER_ASSIGNMENT         =
      BEHAVE_WHEN_ERROR             =
      LOGIC_SWITCH                  =
      TESTRUN                       =
      CONVERT                       = ' '
         IMPORTING
           SALESDOCUMENT                  = GT_SALESDOCUMENT
          TABLES
           RETURN                         = GT_RETURN
            ORDER_ITEMS_IN                = GT_ORDER_ITEMS_IN
            ORDER_ITEMS_INX               = GT_ORDER_ITEMS_INX
            ORDER_PARTNERS                = GT_ORDER_PARTNERS
           ORDER_SCHEDULES_IN            =  GT_ORDER_SCHEDULES_IN
           ORDER_SCHEDULES_INX           =  GT_ORDER_SCHEDULES_INX
           ORDER_CONDITIONS_IN           =  GT_ORDER_CONDITIONS_IN
           ORDER_CONDITIONS_INX          =  GT_ORDER_CONDITIONS_INX
      ORDER_CFGS_REF                =
      ORDER_CFGS_INST               =
      ORDER_CFGS_PART_OF            =
      ORDER_CFGS_VALUE              =
      ORDER_CFGS_BLOB               =
      ORDER_CFGS_VK                 =
      ORDER_CFGS_REFINST            =
      ORDER_CCARD                   =
      ORDER_TEXT                    =
      ORDER_KEYS                    =
      EXTENSIONIN                   =
      PARTNERADDRESSES              =
        IF GT_RETURN-TYPE EQ 'E' .
          E_REC = E_REC + 1.
          READ TABLE GT_RETURN WITH KEY ID = 'V1'.
          FORMAT COLOR COL_NEGATIVE INVERSE ON.
          REC_NO = E_REC + S_REC.
              CONCATENATE TEXT-006 REC_NO ':'
              GT_RETURN-MESSAGE INTO MSG SEPARATED BY SPACE .
              CONDENSE MSG.
              WRITE: / MSG.
          FORMAT COLOR COL_NEGATIVE INVERSE OFF.
      ELSEIF GT_RETURN-TYPE EQ 'S'.
          S_REC = S_REC + 1.
          FORMAT COLOR COL_POSITIVE INVERSE ON.
              MSG = GT_RETURN-MESSAGE.
              CONDENSE MSG.
              WRITE: / MSG .
          FORMAT COLOR COL_POSITIVE INVERSE OFF.
         PERFORM COMMIT_MM.
    ENDIF.
          CLEAR:  GT_RETURN[], MSG.
    ENDFORM.                    " SLALE_UPLOAD_DATA
    *&      Form  COMMIT_MM
          text
    -->  p1        text
    <--  p2        text
    FORM COMMIT_MM .
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          EXPORTING
            WAIT   = 'X'
          IMPORTING
            RETURN = GT_RETURN.
      clear:      GT_ORDER_ITEMS_IN[],GT_ORDER_CONDITIONS_IN[].
    ENDFORM.                    " COMMIT_MM

  • Want to send the Sales Order No  in Alert message

    Hi,
         my scenario is  IDoc to File.  suppose due to sme validations my message got failed in any where. immediatley I'm  sending an Alert to End User . But as per the prsent devolopment End user is not understaning  that which Sale order got failed. End user is not capable to open the Hyperlinks of the message monitoring . So, user is asking to send the Sales order no inside the Alert message (Mail) .
    is it possible to send the message content also inside the Alert Message (Mail)
    Regards
    Jain

    is it possible to send the message content also inside the Alert Message (Mail)
    Since the salesorder number comes from the payload....you need to introduce a BPM here....there is no other option than this to get a value from payload into alert message..
    There is a blog by Michal explaining the same....please check...if i get it will update the same:)
    this is the blog i am talking about....check if it helps you..
    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    Regards,
    Abhishek.
    Edited by: abhishek salvi on May 7, 2009 8:09 PM

  • Regarding Sales Order Creation

    hi all,
         I have one requirement , i.e  Our Client has one wish that  for every customer he is fixing some line items means 5 or 6 line items.  IF it is less than that sales order will not create for that particular customer and it needs to show warning message .
    How can i achieve this .
    Plz send some suggetions to solve this problem.
    Regards
    Rami Reddy

    hi,
    pls see the below threads.
    SALES ORDER creation using BAPI
    sales order creation/change
    XML upload of data into SAP - Sale order creation
    sales order creation
    Sales order creation BAPI
    thanks
    karthik

  • Generating purchase order idoc, when a sales order is created

    Hi folks,
           we need to send purchase order idoc from SAP to some external system. Once sales order is created, it should automatically generate the purchase order idoc and send to the external system....Any document showing step by step configuration to do so? I have basic knowldege of ALE and IDOC...please suggest me the configuration steps in detail...
               Thanks in advance,
                 Shyam.

    Hi,
    1. Configure the IDoc with message type ORDERS and basic IDoc type as ORDERS05 (You have to follow common step-by-step approach)
    2. Configure Message Control to automatically generate IDoc whenever a Sales Order is created. (I mean output type)
    So whenever a Sales Order is created, output type will generate an IDoc.
    Hope this information is useful.
    Regards,
    AK

  • Generate idoc when deleting sales order

    I have seen in matmas that there is a flag for the deleted mark, but i can´t see it in the sales order, is there any flag in orders05 when the sales order is deleted, does the system send an idoc when the sales order is deleted, how?
    Thanks in advance.
    Regards

    OK, it still finished, just only last question please.
    In the head table CDHDR appears the sales order with the 'U' field indicating that it has been updated and in the CDPOS table appears all the positions with the 'D' flag indicating that has been deleted, is it ok or how could i know that the whole sales order has been deleted?.
    Thanks in advance
    regards

Maybe you are looking for