IDOC Server issue using JCo3

Hi,
u201CI am trying to send MATMAS IDOC from SAP to non-SAP system using JCo3. But it is giving error RFC_ERROR_INTERNAL: COMMUNICATION_FAILURE Cannot lock transaction". I checked this error in TCode SM58 in SAP system.
However, I am able to send successfully using JCo2. Could anybody help me about the solution or suggestion, if I am missing something.u201D
Regards,
Anzar

Hi,
Are you trying to send Idoc to no-sap System?
If yes then you have to reset or restart SAP Listner and Adapter at non-sap end.
And then once again try to send the same idoc
Thanks & Regards,
ShreeMohan
Edited by: ShreeMohan Pugalia on Jul 22, 2009 2:52 PM

Similar Messages

Linked server issue using SQLNCLI versions on SQL 2008 & 2014

Hi all,
Our product creates databases on a sql server 2008 instance and creates linked servers between them to use distributed queries.
This looks like: "EXEC sp_addlinkedserver 'linkDatabaseA', '', 'SQLNCLI10', '.', NULL, NULL, 'DatabaseA'"".
Distributed queries from second database to DatabaseA work fine in this scenario.
As we want to support both SQL 2008 and SQL 2014 in the next product version, I changed this to SQLNCLI11 as the provider
and tested on SQL 2008 after installation of the SQLNCLI11 driver.
This resulted in following error message:
Msg 468, Level 16, State 9, Line 7
Cannot resolve the collation conflict between "Latin1_General_CI_AS" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
This is very suprising as the SQL Server 2008 instance and both DB's have "SQL_Latin1_General_CP1_CI_AS" as their collation sequence.
Then I tried the opposite, installing SQLNCLI10 on SQL 2014. This gave exactly same error! Using SQLNCLI11 went fine ofcourse.
Generation sp_addlinkedserver statements with correct driver based on SQL version, I'd rather not do (some of the calls are
generated in SQL from settings in other db tables which are also used for external connx) and adding COLLATE to the queries also
has consequences like performance degradation. Adding collate on SQL 2014 with SQLNCLI10 as linked server provider results in
following error:
Msg 7399, Level 16, State 1, Line 1617
The OLE DB provider "SQLNCLI10" for linked server "linkDatabaseA" reported an error. Access denied.
Msg 7301, Level 16, State 2, Line 1617
Cannot obtain the required interface ("IID_IDBCreateCommand") from OLE DB provider "SQLNCLI10" for linked server "linkDatabaseA".
Q: Is there any way that SQLNCLI11 can be made to work for linked servers on SQL2008 (preferred solution) or SQLNCLI10 on SQL2014?
Thx for any feedback.
Regards, Jouke

Hi Sofiya,
Thx for replying.
For the deployment reasons mentioned above, I would prefer to use only one SQLNCLI version in both 2008R2 & 2012/2014 scenario's. Most preferred would ofcourse be SQLNCLI11 as this is the latest.
This would mean that I'd like to be able to configure linked server in SQL2008R2 using SQLNCLI11 driver.
I would expect that it would be downward compatible with SQLNCLI10 for all client usage, including linked server, which in essence is one SQL DB doing client access to another SQL DB either on same server instance or another. I suspect it requests DB
metadata from remote DB in order to make decisions and this seems not to work in my setup. If this metadata API is part of the public API, this could indicate that medadata API has been broken in SQLNCLI11 (heavy speculation on my part here!), which could
also affect other usage (eg. linked server between SQL2008(R2) and SQL2012/2014 instances, (I'll try to set this up and test this, might take a few days. If someone is volunteering, below are db table schemes and query, update @datasrc to point to remote sql
server instance)).
Regards, Jouke
-- This script to run on SQL2008(R2). On SQL2012/2014, install SQLNCLI10 and change @provider in sp_addlinkedserver call.
-- Pre:
-- - DatabaseA and DatabaseB are created manually in SSMS
-- - SQLNCLI11 has been installed
USE [DatabaseA]
GO
CREATE TABLE [dbo].[DatabaseATable](
[IdField] [int] NOT NULL,
[LinkField] [nchar](10) NULL,
CONSTRAINT [PK_DatabaseATable] PRIMARY KEY CLUSTERED
[IdField] ASC
) ON [PRIMARY]
GO
EXEC master.dbo.sp_addlinkedserver @server = N'linkDatabaseA', @srvproduct=N'',@provider=N'SQLNCLI11', @datasrc=N'.', @catalog=N'DatabaseA'
GO
USE [DatabaseB]
GO
CREATE TABLE [dbo].[DatabaseBTable](
[IdField] [int] NOT NULL,
[LinkField] [nchar](10) NULL,
CONSTRAINT [PK_DatabaseBTable] PRIMARY KEY CLUSTERED
[IdField] ASC
) ON [PRIMARY]
GO
SELECT b.*, a.*
FROM DatabaseBTable AS b WITH(NOLOCK)
JOIN linkDatabaseA.DatabaseA.dbo.DatabaseATable AS a
ON a.LinkField = b.LinkField
Hi Jouke Numan,
According to your description, I install SQL Native Client 11.0 OLE DB Provider in SQL Server 2008R2, and as you post, create two database on the same instance with collation in server default, then create Linked Server with SQLNCI11.0.
When I run the query statement, it can execute well. It also do not occur the collation conflict. I still recommend you check the collation of server, database, or column and so on.
SQL Server Native Client 11.0 provides OLE DB support to applications connecting to SQL Server versions 2005, 2008, 2008R2, 2012. So for the deployment reasons, you can choose the only SQLNCLI11.0 in both SQL Server 2008R2 and SQL Server 2012/2014.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Issues with creating and sending BOM XML IDOC to SAP using 2010 WCF-SAP Adapter (without using Biztalk Server)

I'm trying to replace an existing Biztalk 2006 Send BOM IDOC process, and completely remove Biztalk server from the equation. The existing Bizatalk 2006 server receives an input BOM (Bill of Materials) flat file, and using a Biztalk Map (BM08),
and Orchestration, generates an Idoc and sends it to SAP.
In my replacement C# program, I'm using the 2010 WCF-SAP Adapter, and am trying to generate the BOMMAT03 XML IDOC it to SAP.
I generated the BOMMAT03 schema from SAP using the Add Adapter Service in VS 2010. I was able to generate a BM08 XSLT from the existing BMO8 map in the current Biztalk 2006 process. I am able to run a XSLT transform on the input BOM flat
file, and generate an XML file from that.
However, I've run into a few issues. First of which, is that the XML file that is generated from the XSLT transform is NOT the same schema as the BOMMAT03 schema expects. It's somewhat similar, but different enough that I have to manually
translate between the two in my code. I've verified that both the original Bitztalk 2006 process and my replacement program use BOMMAT V3 from SAP. Question--Is Biztalk 2006 server doing some other magic to turn that transormed XML into the BOMMAT03
schema?
I ended writing code which translates the transformed XML into the BOMMAT03 schema (which is a strong typed XML IDOC at this point).
However, when I try to send the BOMMAT03 XML IDOC, I get an exception "Object reference not set to an instance of an object."
idocClient.Send(idocData, ref sadapterTxGuid);
idocData is of type BOMMAT03, and I've verified that the various fields are populated.
Any help is appreciated.

Well, putting in a MSDN subscription support ticket for Biztalk server actually helped with the issue. They didn't find, or fix the issue directly. But one of the examples (https://randypaulo.wordpress.com/tag/idoc/) they sent over, jogged my
memory, and I realized in the code snippet below, I had accidentally deleted the 1st line. Such a simple mistake, yet was easy to overlook. The URL example is almost EXACTLY like my code, but without the transform and translation code to convert
from input XML file to IDOC XML. If someone is interested in that, let me know.
//Forgot the 1st line.
idocClient = new IdocBOMMAT03SIEIS_WED_BOMMAT03V3R700Client(binding, endpointAddress);
idocClient.Send(idocData, ref sadapterTxGuid);
For anyone else interested in knowing, you CAN send a strongly typed IDOC to SAP using C#.NET and the WCF SAP 2010 Adapter, using the IDOC Binding Client class you generated using the Add Adapter Service Reference in VS2010.
The one difference, which no one, not even the tech support from MS could tell me, was why the XSLT which I generated from the original map, did not transform the input BOM XML into the BOMMAT03 XML. Instead, it transformed it into an intermediate
XML, which resembled the BOMMAT03 IDOC XML, but still needed to be translated to the BOMMAT03 IDOC format.
The tech support person swore up and down that it should. But I believe that something happens in Biztalk server, after the Mapping occurs, maybe in the Pipeline, which converts that
intermediate XML into the final BOMMAT03 IDOC XML format.
I do think that the examples are severely lacking in showing how to send a strong typed IDOC using C# and the WCF-SAP Adapter. Even worse, the examples are completely lacking in how to actually generate a weakly typed IDOC. They show how to send
that weakly typed IDOC, but show me, or give me a class to be able to generate it.
I realize that this is not quite the "recommended way" to do it, but in reality, not everyone wants or even needs a full Biztalk installation. For some simple stuff like this, a C#.NET program and WCF-SAP adapter do the trick.

Issue in JCo3 server creation

Hi,
I am facing following issue while creating JCo server using JCo3.03:
"Unable to create the server SERVER, because of Unable to get repository"
Could anybody reply to solve the above issue.
Regards,
Anzar

Dear All,
Any suggestion..
Bittu

Cancel goods issue using idoc DELVRY03

Hi,
IS it possible to cancel goods issue using inbound idoc DELVRY03.
The field 'qualf' of the segment E1EDL43 says it's possible to do It. But when I try to do IT I have a message saying that the GI has already been performed and that I can't do anything on the delivery.
Do someone know if It's possible or not using DELVRY03.
And if not what is the idoc allaowing this.
Thanks in advance

Hi omar,
i have your same trouble.
Have you found anything?
thanks in advance

Issues with an LDAP server configured using DHCP instead of static.

Can anyone tell me if there is a known issue using a DHCP address instead of a static IP address to build a 10.4 MAC server that will is a LDAP master?
I have an LDAP master that is running 10.4 that has user account issues. Random users will suddenly not be able to authenticate against the server. I have been told this is because the server was originally built using a DHCP address and then migrated to a static IP. Being a UNIX geek this does not seem to make a lot of sense to me but I am new to MAC..... So?

It absolutely could be the cause of the issue. Open Directory uses Kerberos (among other things) for authentication. Kerberos is VERY VERY VERY particular about DNS... and if your OD master changed the IP address, it could cause these problems. I wouldn't expect that it would ever work, but perhaps some days the IP is the same as it was during initial setup.
Do a 'sudo changeip -checkhostname' from the server and see if it says everything is okay. If not, you definitely have things you need to fix. Frankly, with DHCP on the server you are 100% guaranteed to have problems at some point.

Installation issue - using a remote server without using remote desktop or citrix

Hello Experts..
We have a client who wants to install SAP Client (SAP 9 PL 11) in their local machines, but connecting to a remote server. They want to avoid connecting through Remote Desktop or Citrix.They already installed SAP clients in local pc's and when they select the server, they already configured it to a server located overseas. We succed on achieve the connection, but the performance is really poor (sometimes it takes about 2 minutes to open a simple menu in SAP).
We ran internet speed tests in the client's office and in the server, and both results were more than satisfactory. But we couldn't come up with a reason for this enviroment works properly..
The question is... Is this kind of enviroment supported by SAP?? Do you know about any alternative to connect from the local PC to a remote server without using remote desktop or citrix??
Thanks in advance...
Raúl Fragueiro

Hi,
I assumed you are using VPN connection right?
In your scenario that is normal since the GUI of SAP B1 is not built for type of connection compare
to SAP ERP GUI.
The only SAP supported type of remote connection is either Terminal Server or Citrix.
In our own scenario we are using Terminal Server and we are very satisfied. We have used
this between to different cities. This is also prevents data corruption cause by intermittent
internet connection.
Hoping you will be convinced of using Terminal Server or Citrix.
By the way, a quick question, why are you hesitant to use RDC or Citrix?
For overview, if your remote requirement is just simple and basic you may use Terminal Server.
The implementation of this is very fast and simple also, what you need is only a license.
If complex and advance features connection requirement connection use Citrix.
For better understanding you may search from the site for the difference of the two.
Thanks.
Regards,
Clint

Stop and re-start JCo Idoc Server

Hi
I created a JCO IDoc server (using the JCoIDocServer class) , so far it works fine for me to send and receive IDocs to R/3. The only issue is when I try to start and stop the JCO Idoc server at runtime. When I call the Stop method(). It seems like the service is stopped but if i call a Start method after that( even on a completely new class instance) I'm getting a nullpointer exception. I have seen documents on JCOServer says that use suspend method for stop the server, but this is not available for the JCoIDocServer class. How can I stop a server which is running, programaticalluy and restart it again ? (I dont mind if I have to reinstantiate the whole server class) . I use JCO and IDoc libaray version 3.0 . Please help
Thanks

Hi,
Try using the abort() after your stop in a "if" condition. You need to provide a message as a parameter for the abort() method, so that the remote SAP System (in case the IDoc Server is still connected to it) knows the reason why the IDoc server shutdown without any warning.
So your code should look something like this (warning pseudo-code ) -
server.stop();
if(server.alive())
server.abort("Forcing shutdown because its wakey wakey eggs and beccy time!");
Try logging the status of the server after the stop() and abort() methods to know what the server is doing. I hate people using the suspend() method to "stop" the server, because it does not stop the server. It only suspends operations, so your connection and session to the remote SAP System remains open.
After the time out (can be hours) on the remote System, the connection is closed, but until then, the remote SAP System keeps expecting your server to talk back to it. Open sessions are of course more dangerous than runaway trains, so avoid the suspend() method if you can.
T00th
Edited by: Sameer Jagirdar on Jan 21, 2010 1:14 PM --> fixed the code display thingy.
Edited by: Sameer Jagirdar on Jan 21, 2010 1:15 PM

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

Regarding Sun Java System Application Server Issue with JVM

Regarding Sun Java System Application Server Issue with JVM
Hi
I have installed SJSAS9.1 on solaris system. I m trying to deploy war file which i compiled in windows enviorment by jdk1.5.0_05. Every time i got the following error :
type Exception report
message
descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: PWC6033: Unable to compile class for JSP
PWC6199: Generated servlet error:
[javac] javac: invalid target release: 1.5
[javac] Usage: javac
[javac] where possible options include:
[javac] -g Generate all debugging info
[javac] -g:none Generate no debugging info
[javac] -g:{lines,vars,source} Generate only some debugging info
[javac] -nowarn Generate no warnings
[javac] -verbose Output messages about what the compiler is doing
[javac] -deprecation Output source locations where deprecated APIs are used
[javac] -classpath Specify where to find user class files
[javac] -sourcepath Specify where to find input source files
[javac] -bootclasspath Override location of bootstrap class files
[javac] -extdirs Override location of installed extensions
[javac] -d Specify where to place generated class files
[javac] -encoding Specify character encoding used by source files
[javac] -source Provide source compatibility with specified release
[javac] -target Generate class files for specific VM version
[javac] -help Print a synopsis of standard options
note The full stack traces of the exception and its root causes are available in the Sun Java System Application Server 9.1 logs.
I have cheked jvm version on both system the only difference is :
Solaris points to jdk 1.5.0_09
Windows point to jdk1.5.0_05
Even i tried to run blank jsp also but again i got the same error.
Can any help me to sort out the problem or give me any idea so i can do something by my own.
Thanks in Advance
Gagan

Do you have ANT installed and available?
Thanks,
Kedar

Trying to configure a Win 2003 Server to use TLS server authentication . . .

I am trying to
configure a Win 2003 Server to use TLS server authentication following Method 2 in KB 895443 - see below:-
Method 2: By using the Certificate Request Wizard
The following steps describe how to obtain a certificate from a Windows Server 2003 Certification Authority. You can also request a certificate from a Windows 2000
Certification Authority. Additionally, you must have Read permissions and Enroll permissions on the certificate template file to successfully request a certificate. Use this method if one or more of the following conditions are true:
You want to request a certificate from an Enterprise Certification Authority.
You want to request a certificate that is based on a template where the subject name is generated by Windows.
You want to obtain a certificate that does not require administrator approval before the certificate is issued.
To obtain a certificate, follow these steps:
Click Start, click Run, type mmc, and then click OK.
On the File menu, click Add/Remove Snap-in.
Click Add, click Certificates, and then click Add.
Click Computer account, and then click Next.
If you want to add a certificate to the local computer, click Local computer. If you want to add a certificate to a remote computer, click Another
computer, and then type the name of that remote computer in the Another computer box.
Click Finish.
In the Add Standalone Snap-in dialog box, click Close, and then click OK in the Add/Remove
Snap-in dialog box.
Under Console Root, click Certificates (Local Computer).
Note If you configured the Certificates MMC snap-in to manage a remote computer, click Certificates (servername)instead of Certificates (Local Computer).
On the View menu, click Options.
In the View Options dialog box, click Certificate purpose, and then click OK.
In the right pane, right-click Server Authentication, point to All Tasks, and then click Request New Certificate.
In the Certificate Request Wizard that starts, click Next.
In the Certificate types list, click Server Authentication, click to select the Advanced check box,
and then click Next.
In the Cryptographic Service Providers list, click Microsoft RSA SChannel Cryptographic Provider.
I get as far as step 11 and I get the error message:-
The wizard cannot be started because of one or more of the following conditions:
- There are no trusted certification authorities (CAs) available.
- You do not have the permissions to request certificates from the available CAs.
- The available CAs issue certificates for which you do not have permissions.
This is covered in KB 927066 – see below:-
To resolve the problem, follow these steps:
Verify that the CERTSVC_DCOM_ACCESS group exists in the domain that hosts the certification authority. This group is in the CN=Users container.
To do this, follow these steps:
Click Start, click Run,
type Dsa.msc, and then click OK.
In the left pane, click the Users container.
Verify that the CERTSVC_DCOM_ACCESS group is in the right
pane. If the CERTSVC_DCOM_ACCESS group is not in the right pane, go to step 4.
Verify that the CERTSVC_DCOM_ACCESS group includes the following member groups:
Domain Users
Domain Computers
If these member groups do not exist in the CERTSVC_DCOM_ACCESS group, go to step 4.
Note If users or computers in other domains need to enroll against the certification authority, you must also add those users and computers to the CERTSVC_DCOM_ACCESS group. If the current problem occurs on a domain
controller, you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group. By default, domain controllers are not members of the Domain Computers global group. Therefore, domain controllers
do not have sufficient DCOM permissions.
Verify that the CERTSVC_DCOM_ACCESS group has the appropriate DCOM Access permissions and DCOM Launch and Activation permissions on the computer that hosts the certification
authority.
Click Start, point to Program,
point to Administrative Tools, and then click Component Services.
Expand the Component Services node.
Expand the Computers node.
Right-click the My Computer node, and
then click Properties.
Click the COM Security tab.
Under Access Permission, click Edit
Limits.
Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Access and Allow
Remote Access permissions, and then click Cancel.
Under Launch and Activation Permissions, click Edit
Limits.
Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Activation and Allow
Remote Activationpermissions, and then click Cancel.
Click Cancel, and then close the Component
Services console.
Settings may be incorrect if any one of the following conditions is true:
The CERTSVC_DCOM_ACCESS group does not exist.
The default membership of the CERTSVC_DCOM_ACCESS group is incorrect.
The CERTSVC_DCOM_ACCESS group does not have the correct permissions.
If any one setting is incorrect, run the following commands at a command prompt. Press ENTER after each command.
certutil -setreg SetupStatus -SETUP_DCOM_SECURITY_UPDATED_FLAG
net stop certsvc
net start certsvc
Repeat steps 1 through 3 to verify that all the settings are correct.
Note If the changes affect the group membership of the certification authority server, you must restart the server for the changes to take effect.
The only part of the above instructions which I have not been able to complete is:-
“you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group”.
When I click on the CERTSVC_DCOM_ACCESS user then click the Members tab & go to add Enterprise Domain Controllers the option is not there.

Hi Nick,
Have you successfully set up an enterprise CA?
If yes, is the enterprise CA’s certificate located under the Trusted Root Certification Authorities store?
Best Regards,
Amy

[Forum FAQ] "Unable to connect to the server by using Windows PowerShell Remoting" error while installing RDS roles on Server 2012 R2

When you try to install RDS role on server 2012 R2 using standard deployment, this issue may occur (Figure 1).
“Unable to connect to the server by using Windows PowerShell remoting”.
Figure 1: Unable to connect to the server by using Windows PowerShell remoting
First of all, we need to verify the configurations as it suggested:
1. The server must be available by using Windows PowerShell remotely.
2. The server must be joined to a domain.
3. The server must be running at least Windows Server 2012 R2.
4. The currently logged on user must be a member of the local Administrators group on the server.
5. Remote Desktop Services connections must be enabled by using Group Policy.
In addition, we need to check if the “Windows Remote Management “service is running and related firewall exceptions have been created for WinRM listener.
To enabling PowerShell remoting, we can run this PowerShell command as administrator (Figure 2).
Enable-PSRemoting -Force
Figure 2: Enable PowerShell Remoting
However, if issue persists, we need to check whether it has enough memory to work.
By default, remote shell allots only 150 MB of memory. If we have IIS or SharePoint App pool, 150 MB of memory is not sufficient to perform the remoting task. Therefore, we need to increase
the memory via the PowerShell command below:
Set-Item WSMan:\localhost\Shell\MaxMemoryPerShellMB 1000
Then, you need to restart the server and the issue should be resolved.
You can get more information regarding Remote Troubleshooting by below link:
about_Remote_Troubleshooting
If you need further assistance, welcome to post your questions in the
RDS forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

i found another possible reason, this solution worked for me:
http://oyvindnilsen.com/solution-for-powershell-remoting-error-it-cannot-determine-the-content-type-of-the-http-response-from-the-destination-computer/
I tried to set up powershell remoting on a server and kept getting this error:
Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client cann
ot process the request. It cannot determine the content type of the HTTP response from the destination comput
er. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help to
pic.
After a bit of troubleshooting I discovered that the problem was that the authentication packets was to big (over 16k), this will cause WinRM to reject the request. The reason for authentication packets getting too big can be because the user is member of very
many security groups or in my case because of the SidHistory attribute.
The solution was to increase the MaxFieldLength and MaxRequestBytes keys in the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters
If the keys does not exists you can create them, be sure to use the DWORD type.
I sat MaxFieldLength to DEC value 40000 and MaxRequestBytes to DEC value 32768 and rebooted the server. Problem solved.

HP Connected server issues

My printer has been working well *. since I purchased it earlier this year. until about a week ago when I upgraded to the next level Instant Ink plan. Since then when I try to print the display on the printer shows a rotating circle with the word Printing. This remains for around 2 minutes, without printing anything, and then I get a message on the display that tells me that "The printer cannot connect to HP Connected". At the same time I get a pop up on my PC that "warns me" that the printer cannot connect to HP Connected and that this may cause my printer to stop printing. The terrible message concludes with the meaningless "OK" statement, having urged me to follow the printer's on screen display to make the connection. When I try to follow the instructions on the printer it merely confirms that the printer is connected. I usually cancel out of the setup and then, as if by magic, whatever I tried to print suddenly starts printing. So, my questions are?
1) Is this a common or at least know problem?
2) Is it caused by my having changed Instant Ink plans and if so what has HP done to cause this?
3) I have not knowingly changed anything on my system other than the HP Instank Ink plan so why does the printer no longer connect to the HP Connected server to update that system with details of my print usage?
4) Is there a fix/workaround that will prevent me from having to manually coax my printer to work again?
I have already used the HP Updates function and have reset/restarted both the wireless router and my PC.
* I do occasionally get messages saying that the scan function isn't available because it's lost connectivity but this seems to rectify itself without having to do anything else.

Hello GaryG888,
Welcome to the HP Support Forums!
Thank you for the very informative post. With that great info I think I know what has happened. Over the weekend (24th, 25th & 26th) there had been Web Service server issues. As of right now, here is the fix and or workaround: Re: How do I correct the date on my HP Envy 4500?
Please follow up and let me know if this helps you.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Integrated weblogic server Issue with Host name mapped to multiple IPs

I am running very simple ADF application from Jdev 11g (11.1.1.3.0).
Compilation was successful but weblogic server facing problem while starting.
It is showing HostAName is mapped with Multiple IP Addresses.
Please provide solution to fix the issue....
log is,
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1 -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<Dec 23, 2010 11:49:42 AM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
<Dec 23, 2010 11:49:44 AM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<Dec 23, 2010 11:49:46 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 23, 2010 11:49:46 AM EST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Dec 23, 2010 11:49:46 AM EST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Dec 23, 2010 11:49:46 AM EST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00001. Log messages will continue to be logged in C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Dec 23, 2010 11:49:46 AM EST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Dec 23, 2010 11:49:57 AM EST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Dec 23, 2010 11:50:14 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Dec 23, 2010 11:50:14 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 23, 2010 11:50:28 AM EST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Dec 23, 2010 11:50:28 AM EST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00001. Log messages will continue to be logged in C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Dec 23, 2010 11:50:28 AM EST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Dec 23, 2010 11:50:31 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:114b:ab6a:23b1:b44c:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.10.103:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:c48:60a:9d0d:7cda:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:0:5efe:c0a8:a67:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:95ca:d058:6a51:53e8:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Warning> <Server> <BEA-002611> <Hostname "Raja-PC", maps to multiple IP addresses: 192.168.10.103, fe80:0:0:0:114b:ab6a:23b1:b44c%12, fe80:0:0:0:c48:60a:9d0d:7cda%13, 2001:0:4137:9e76:c48:60a:9d0d:7cda>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 2001:0:4137:9e76:c48:60a:9d0d:7cda:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Logger><error> ServletContainerAdapter manager not initialized correctly.
Edited by: user1158476 on Dec 23, 2010 3:05 PM

Thanks for reply...
If you look at the last line of log there is some error message:
<Logger><error> ServletContainerAdapter manager not initialized correctly.
after this no further logs and web page not open in Browser.

IDoc Performance Issue

Hi,
I have strange issue in the IDoc deliviry to the R3 systems.
We have a IDoc created every 30 minutes and the deliviried to R3 systems.
Because of some systems issues 2 IDocs that were created at 30 minutes interval was delivired to the R3 system at the same time, which should not happen.This has caused a data conflict.
Is there any mechaninm that can be incorporated to avoid dispatching of 2 or more Idocs of same type at the same time.

Hi
At Idoc delivary use time stamp to Idoc name. Use the system time.
Thnks
Venkat Anil

IDOC Server issue using JCo3

Similar Messages

Maybe you are looking for