Issues with an LDAP server configured using DHCP instead of static.

Can anyone tell me if there is a known issue using a DHCP address instead of a static IP address to build a 10.4 MAC server that will is a LDAP master?
I have an LDAP master that is running 10.4 that has user account issues. Random users will suddenly not be able to authenticate against the server. I have been told this is because the server was originally built using a DHCP address and then migrated to a static IP. Being a UNIX geek this does not seem to make a lot of sense to me but I am new to MAC..... So?

It absolutely could be the cause of the issue. Open Directory uses Kerberos (among other things) for authentication. Kerberos is VERY VERY VERY particular about DNS... and if your OD master changed the IP address, it could cause these problems. I wouldn't expect that it would ever work, but perhaps some days the IP is the same as it was during initial setup.
Do a 'sudo changeip -checkhostname' from the server and see if it says everything is okay. If not, you definitely have things you need to fix. Frankly, with DHCP on the server you are 100% guaranteed to have problems at some point.

Similar Messages

LDAP-Server configuration and using

Hi,
can anyone tel me how it function with the LDAP-Server in the Adobe LiveCycle Es?
What i have to do? and how can i get user data from the logged user via LDAP?
Thank

LiveCycle ES has an administrative console you can get at http://localhost:8080/adminui. You can log in with administrator/password.
Under the Settings section, you can go to User Management and then Domain Management.
In there you can define a new Enteprise Domain and create a new Authorization and Directory for that new domain.
In the Authorization, you can select LDAP. Under the Directory, you'll be taken through a wizard that will help you configure the LDAP connection to get the list of users and groups.
Then go back to Domain Management and select "Synch Now". You can set that synchronization to occur periodically.
Once you can connect to the LDAP server properly and get the list of users, you should be able to log to the different interfaces using users from the LDAP system.
You might need to give them LiveCyle roles to access some of the interfaces like adminui, workspace, etc. You can add roles under Settings/User Mangement/Role Management
Jasmin

Getting iCal 3 to work with an LDAP server

I've managed to set up Directory Utility with a third-party LDAP server (part of Communigate Pro) so that Directory will look up people.
However I expected that once I did this, iCal would consult the LDAP server to do autocompletion when adding attendees to events. It doesn't.
I thought maybe I could use Address Book's Directories Group to facilitate adding attendees. Both the LDAP server configured through Mail and the LDAP Directory Service configured through Directory Utility are visible here--but even though I can look people up, I can't drag any of the resulting names into the Attendees list in iCal.
It seems I first have to drag them into a local Group; only then can I drag them into Attendee lists in iCal.
Finally, iCal has a feature called the Address Panel which I thought might make use of an LDAP server configured through Directory Utility, but it hasn't worked for me. The Panel says "Open Directory Lookup" near the top of the window, which suggests it might not be intended to function with any old LDAP implementation.
Any suggestions?
By the way, I have the LDAP server's entry in Directory Utility as RFC 2307 with an empty searchbase for all mappings. However I haven't modified any of the mappings themselves.
Thanks.

iCal 3 looks for certain specific LDAP attributes which are (somewhat) unique to Open Directory.
Some information on mimicking Open Directory can be found at http://wiki.expertmx.com/doku.php?id=applecalendarserver

[OBPM 10gR3]How to configer a hybrid directory with Oracle LDAP Server

Hey, guys,
Does anyone have experience on configering a hybrid directory with Oracle LDAP Server? How to config the mapping conf file for Oracle LDAP in the directory of \OraBPMwlHome\conf?
Here is my conf file. But I got some LDAP mapping errors. It's really weird OBPM doesn't support Oracle's self LDAP, at least it does not provide the conf file.
-----------errors------------
Exception [javax.naming.OperationNotSupportedException: [LDAP: error code 53 - Function Not Implemented]; remaining name '']. Reason: [LDAP: error code 53 - Function Not Implemented] fuego.directory.DirectoryRuntimeException: Exception [javax.naming.OperationNotSupportedException: [LDAP: error code 53 - Function Not Implemented]; remaining name '']. at fuego.directory.DirectoryRuntimeException.wrapException(DirectoryRuntimeException.java:85) at fuego.directory.hybrid.ldap.JNDIQueryExecutor.select(JNDIQueryExecutor.java:203) at fuego.directory.hybrid.ldap.JNDIQueryExecutor.selectAllFromView(JNDIQueryExecutor.java:84) at fuego.directory.hybrid.ldap.JNDIQueryExecutor.selectAllFromView(JNDIQueryExecutor.java:64) at fuego.directory.hybrid.ldap.Repository.selectAllFromView(Repository.java:54) at fuego.directory.hybrid.ldap.LDAPPollingEventGenerator.buildCurrentProxies(LDAPPollingEventGenerator.java:98) at fuego.directory.provider.notifiers.BasePollingEventGenerator.generateEvents(BasePollingEventGenerator.java:41) at fuego.directory.hybrid.HybridMultipleEventGenerator.generateEvents(HybridMultipleEventGenerator.java:43) at fuego.directory.provider.notifiers.DirectoryNotifier.notifyChanges(DirectoryNotifier.java:403) at fuego.server.service.DirectoryListener.updateEngineFromDirectoryImpl(DirectoryListener.java:309) at fuego.server.service.DirectoryListener$DirectoryPollingItem.execute(DirectoryListener.java:351) at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304) at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551) at fuego.transaction.TransactionAction.start(TransactionAction.java:212) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123) at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:62) at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42) at fuego.ejbengine.ejb.EngineStartupBean.executeItem(EngineStartupBean.java:192) at fuego.ejbengine.ejb.EngineStartupBean.updateFromDirectory(EngineStartupBean.java:172) at fuego.ejbengine.ejb.engine_startup_bpmengine_wodkyx_ELOImpl.updateFromDirectory(engine_startup_bpmengine_wodkyx_ELOImpl.java:365) at fuego.ejbengine.servlet.SchedulerServlet$DirectoryPollingTask.runImpl(SchedulerServlet.java:269) at fuego.ejbengine.servlet.SchedulerServlet$ScheduledTask.run(SchedulerServlet.java:208) at java.util.TimerThread.mainLoop(Timer.java:512) at java.util.TimerThread.run(Timer.java:462) Caused by: javax.naming.OperationNotSupportedException: [LDAP: error code 53 - Function Not Implemented]; remaining name '' at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3078) at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2951) at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2758) at com.sun.jndi.ldap.LdapCtx.searchAux(LdapCtx.java:1812) at com.sun.jndi.ldap.LdapCtx.c_search(LdapCtx.java:1735) at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_search(ComponentDirContext.java:368) at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCompositeDirContext.java:338) at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCompositeDirContext.java:321) at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:248) at fuego.jndi.FaultTolerantDirContext.search(FaultTolerantDirContext.java:867) at fuego.directory.hybrid.ldap.JNDIQueryExecutor.select(JNDIQueryExecutor.java:190) ... 23 more
-----------mapping conf file for Oracle LDAP---------
<?xml version="1.0" encoding="UTF-8"?>
<?fuego version="6.1 ALPHA" application="albpmenterprise"?>

<config>
     <object id="person">
          <object-filter>
               <![CDATA[
                    (objectclass=inetOrgPerson)
               ]]>
          </object-filter>
          <relative-dn>
               
          </relative-dn>
          <attribute id="id" value="uid"/>
          <attribute id="lastName" value="sn"/>
          <attribute id="firstName" value="givenname"/>
          <attribute id="accountLock" value="orclIsEnabled">
               <attribute-comparator operation="EQUALS" compareTo="ENABLED"/>
               <filter>
                    <![CDATA[
                         ($accountLock=ENABLED)
                    ]]>
               </filter>
          </attribute>
          <attribute id="facsimileTelephoneNumber" value="facsimileTelephoneNumber"/>
          <attribute id="displayName" value="displayName"/>
          <attribute id="mail" value="mail"/>
          <attribute id="telephoneNumber" value="telephoneNumber"/>
          <attribute id="employeeId" value="employeeNumber"/>
          <attribute id="thumbnailPhoto" value="jpegPhoto"/>
          <attribute id="manager" value="manager"/>
          <attribute id="modifyTimeStamp" value="modifytimestamp"/>
     </object>
     <object id="group">
          <object-filter>
               <![CDATA[
                    (objectclass=orclGroup)
               ]]>
          </object-filter>
          <relative-dn>
               
</relative-dn>
          <attribute id="id" value="dn"/>
          <attribute id="modifyTimeStamp" value="modifytimestamp"/>
          <attribute id="displayName" value="displayName"/>
          <attribute id="name" value="cn"/>
          <attribute id="description" value="description"/>
          <attribute id="assignedParticipants" value="uniquemember"/>
          
          <attribute id="ou" value="uniquemember"/>
     </object>
     <object id="ou">
          <object-filter>
               <![CDATA[
                    (objectclass=domain)
               ]]>
          </object-filter>
          <relative-dn>
               
</relative-dn>
          <attribute id="name" value="orclsubscriberfullname"/>
          <attribute id="description" value="description"/>
     </object>
</config>
Edited by: Lemonice on 2009-3-30 上午2:08
Edited by: Lemonice on 2009-3-30 下午7:01
Edited by: Lemonice on 2009-3-30 下午8:43

Hi,
in my case, I am trying to configure the OBPM directory using ALUI and its native LDAP service.
Now, I found that the first name and the last name in BPM are retrieved from the ALUI display name : provided we enter the display name in the format %first name% + %last name% we get them into BPM. But the display name is not always in this format...
In addition, it's the portal telephone number information which is retrieved into BPM Telephone and Fax numbers.
And, the email adress remains blank
I have installed the latest patch for OBPM (Version: 10.3.1.0.0 Build: #97172)
Would you have any documentation about creating a Profile Web Service in ALUI and specifying which LDAP attributes to map to which ALUI properties in the Profile Source ?
Thanks !
Edited by: vVince on May 6, 2009 3:46 PM

Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

Hi,
I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
During the process, I faced some issue with the output server in printing the labels.
When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
The file is move to the error folder and an error file is getting generated which contains the error message as given below:
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
I also verified the license and it is a valid licence.
Kindly help me out in solving this issue.
Thanks
Senthil

I assume this is too late to help you, but other might need a hint. I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
Hope this helps anyone....
Vegard

My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using.

My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using. I use a cheap Logitech Stereo Headset H130, but since there is only on audio plugin on the computer, I purchased a 3.5 mm 4-pin smartphone audio adapter thingy. That allowed me to put both my the sound coming to my headset & the microphone on my headset onto one wire. Everything worked wonderfully when running the Mac OS since they probably have support for that kind of stuff. The problem is though that once I try to use the same method in Windows 7, the OS doesn't recognize my headset microphone at all, but, instead when recording my voice decides to use the built-in mac microphone. Using this adapter still allows me to hear from my headset, but not use the microphone and that becomes a problem. It might be so that Windows 7 doesn't have support\drivers for that... How should I continue from here on out? Any advice?

From what I have read from others on here you may be out of luck. You would need the appropriate Windows drivers for the Cirrus chip in the Mac and no one has been able to successfully locate them. Apple wouldn't support this since Windows is an optional install.
Sorry to bring the bad news.

Issue with PR conversion to PO using ME59 withqty of similar line items

Hi All,
I'm having an issue with PR conversion to PO using ME59
I have a PR with the following line items with all same details except quantity
ex 1
Mat Qty Unit Plant   St Loc
M1   1    EA   P1      S1
M1   29   EA   P1      S1
The PR brings in the Unit automatically
EA is Base Unit Of Measure -Material Master
BT is Order Unit           -Material Master
Conversion
30 EA = 1BT
When i convert this PR to PO using ME59N then i see 2 lines items
M1   1   BT
M2   1   BT
Its doubling the qty (2 BT = 60 EA)
ex 2
Mat Qty Unit Plant   St Loc
M1   1    EA   P1      S1
M1   2    EA   P1      S1
M1   27   EA   P1      S1
The PR brings in the Unit automatically
EA is Base Unit Of Measure -Material Master
BT is Order Unit           -Material Master
Conversion
30 EA = 1BT
When i convert this PR to PO using ME59N then i see 2 lines items
M1   1   BT
M1   1   BT
M1   1   BT
Its 3 times no
PR Qty = 30 EA
PO qty = 3 BT = 90 EA
I guess during conversion to PO
It sees PR Line item 1 and looks for another line items with similar fields ( in our case it sees line 2 in ex 1 and 2 and 3 in ex 2)
i adds the qty 1 and 29 in ex1 and converts the total 30 each to 1 BT and when it moves to 2 line it see item1 and again creates 1BT but the line item 2 was already considered and it should be ignored
Similarly if you see ex2 then it creates 3 limes with 1 BT each
Let me know how to resolve this issue
Thanks

As for std SAP ME59N - make sure there is not rounding value is activated in the Material master as well as info record
If this is not the case than check any custom code is activated for ME59N
becuase generally in many compnay when they use ME59n they don't want the same material from diff PR to create the diff line item in the PO so using the custom logic in the user exist they trick the code
it might be the case for you where you have issue.

Automate cf mx 7 server configuration using scripts?

Hi all,
just wondering is it possible to change a ColdFusion MX 7
server configuration using scripts? For example,could I change the
password for a data source without having to go into the console
and change it manually?
Cheers.

Hi all,
just wondering is it possible to change a ColdFusion MX 7
server configuration using scripts? For example,could I change the
password for a data source without having to go into the console
and change it manually?
Cheers.

[svn:fx-trunk] 7687: Forgot to have WindowedSystemManager use instance instead of static for mixins .

Revision: 7687
Author:   [email protected]
Date:     2009-06-09 13:41:18 -0700 (Tue, 09 Jun 2009)
Log Message:
Forgot to have WindowedSystemManager use instance instead of static for mixins. (regular SystemManager was changed to use instance instead of static before checkin)
Also fix porting error in MarshallPlan.as
QE Notes: None
Doc Notes: None
Bugs: SDK-21461
Reviewer: darrell
tests: checkintests
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21461
Modified Paths:
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/managers/WindowedSystemManager.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/systemClasses/MarshallPlan.a s

Hi Chris,
I tried removing and adding back the dialpeer 101 and adding .T to 501 but still the same result. Please help.
Please see the following:
SEC-HO-VGATEWAY01#show dial-peer voice summ
dial-peer hunt 1
             AD                                    PRE PASS                OUT
TAG    TYPE MIN OPER PREFIX    DEST-PATTERN      FER THRU SESS-TARGET    STAT PORT    KEEPALIVE
501    voip up   up                                0 syst
1001   voip up   up             5...               1 syst ipv4:10.13.14.21
1002   voip up   up             1...$              1 syst ipv4:10.13.14.21
103    voip up   up             911$               1 syst dns:toronto2.voip.ms
102    voip up   up             1[2-9]..[2-9]...- 1 syst dns:toronto2.voip.ms
                                 ...$
101    voip up   up             [2-9]..[2-9]....- 1 syst dns:toronto2.voip.ms
                                 ..$
SEC-HO-VGATEWAY01#show run | sec dial-peer voice 501
dial-peer voice 501 voip
incoming called-number .T
voice-class sip bind control source-interface Loopback0
voice-class sip bind media source-interface Loopback0
dtmf-relay rtp-nte
codec g711ulaw
no vad

Remote Access Management Console - configuration issue with Network Location Server

2012 Std R2
The remote Access management console operation status shows all green except for network location server .
Error: There is no response from the network location server URL. DirectAccess connectivity might not work as expected, and DirectAccess clients located inside the corporate network might not be able to reach internal resources.
Resolution listed as:
1. Configure the network location server on a server that is highly available to clients on the internal network.
2. If the network location server is running on the Remote Access server, ensure that IIS is running, and that the URL is available.
The remote access server is located on this server. IIS is running. What URL: show I be looking at?
Any other thoughts so I can get remote access working.
l also am getting a remote access error for IPV6, could this be a cause:
RoutingDomainID- {00000000-0000-0000-0000-000000000000}: Unable to add the interface {D37062B2-A3E0-4496-A459-9E0BBCE5423C} with the Router Manager for the IPV6 protocol. The following error occurred: Cannot complete this function.
John Lenz

Hi John,
please follow the steps to reinstall TCP/IP stack.
1.Restart your PC into Safe Mode with Networking.
2.
Edit your registry. Delete the following keys:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Winsock
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Winsock2
3.
Open the nettcpip.inf file in your %winroot%/inf folder
(%winroot% is usually c:/windows).
Find the [MS_TCPIP.PrimaryInstall] section. Change the Characteristics value from 0xA0 to 0x80.
Open the properties of the network connection you want to fix. In the General tab, click on the Install button. Click on the Have Disk button, and point the location to %winroot%/inf. After that select TCP/IP (not version 6).
4.
Now you would notice that you can uninstall TCP/IP!
Do that, then restart the PC.
Go back to your network connection, and install TCP/IP again as per the above. After another reboot, you should be up and running.
I also noted that the XP network repair tool may yank out the ISA 2004 firewall client stuff. Just run the firewall clinet repair or install it again to fix that problem after you did your reboot. Before you do this kind of crazy stuff.
5.
This along with a TCP/IP reset using the netsh command:
netsh int ip reset resetlog.txt
wish you have a nice thanksgiving too
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Configure WRT54G Wireless Router with PUBLIC IP address and use DHCP for internal computers

Hi,I have an Internet online service with 5 public IP addresses. The router and the AP are connected to a switch. I would like to configure a WRT54G wireless router with one of this IP public Address and use DHCP (with private ip address) for the computers that will connect to the AP. As the AP is connected to the switch it is possible that other wired computers that are connected to the same switch can obtain an IP address from the DHCP ?
Thansk in advance

Thanks for your help. Please correct me if Im wrong. After connecte the equipments the way you suggestI setup a static IP address (The public IP) in the WRT54GI enable DHCP in the WRT54G with a range from 10.10.0.100 to 10.10.0.200 (as an example) The gateway is the Public IP address right ? How do I route the 10.10.0.x addresses to the public IP address. Thansk again

Issue with Integrated Weblogic Server in JDeveloper

Hi
I'm using JDeveloper version: 11.1.1.7
I'm facing issue with the Integrated Weblogic server in JDeveloper.
When I run the server, the log says as follows:
*** Using port 7101 ***
D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms768m -Xmx768m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\lib\sdoapi.jar;D:\fmwps6\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;D:\fmwps6\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\fmwps6\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Java\JDK16~1.0_5\lib\tools.jar;D:\fmwps6\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\fmwps6\WLSERV~1.3\server\lib\weblogic.jar;D:\fmwps6\modules\features\weblogic.server.modules_10.3.5.0.jar;D:\fmwps6\WLSERV~1.3\server\lib\webservices.jar;D:\fmwps6\modules\ORGAPA~1.1/lib/ant-all.jar;D:\fmwps6\modules\NETSFA~1.0_1/lib/ant-contrib.jar;D:\fmwps6\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\fmwps6\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\fmwps6\WLSERV~1.3\server\lib\xqrl.jar;;D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\config;D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\lib\stringtemplate-2.3b6.jar
PATH=D:\fmwps6\patch_wls1035\profiles\default\native;D:\fmwps6\patch_jdev1111\profiles\default\native;D:\fmwps6\WLSERV~1.3\server\native\win\x64;D:\fmwps6\WLSERV~1.3\server\bin;D:\fmwps6\modules\ORGAPA~1.1\bin;D:\Java\JDK16~1.0_5\jre\bin;D:\Java\JDK16~1.0_5\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\oraclexe\app\oracle\product\11.2.0\server\bin;;D:\ADE\bin;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\WIDCOMM\Bluetooth Software\;C:\Program Files\WIDCOMM\Bluetooth Software\syswow64;D:\Java\jdk1.6.0_51\bin;D:\Softwares\apache-ant-1.7.1\bin;C:\Program Files (x86)\Windows Live\Shared;D:\fmwps6\WLSERV~1.3\server\native\win\x64\oci920_8
* To start WebLogic Server, use a username and   *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console        *
starting weblogic with Java version:
java version "1.6.0_51"
Java(TM) SE Runtime Environment (build 1.6.0_51-b31)
Java HotSpot(TM) 64-Bit Server VM (build 20.51-b02, mixed mode)
Starting WLS with line:
D:\Java\JDK16~1.0_5\bin\java -client   -Xms768m -Xmx768m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\fmwps6\WLSERV~1.3\server\lib\weblogic.policy -agentlib:jdwp=transport=dt_socket,server=y,address=49879 -Djavax.net.ssl.trustStore=D:\fmwps6\wlserver_10.3\server\lib\DemoTrust.jks -Dhttp.proxyHost=www-proxy.idc.oracle.com -Dhttp.proxyPort=80 "-Dhttp.nonProxyHosts=localhost|127.0.0.1|rnaguban-in" -Dhttps.proxyHost=www-proxy.idc.oracle.com -Dhttps.proxyPort=80 "-Dhttps.nonProxyHosts=localhost|127.0.0.1|rnaguban-in" -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Duim.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM -Dweblogic.log.Log4jLoggingEnabled_uim=true -Dlog4j.configuration_uim=loggingconfig.xml -Duim.logging.watchdog.timer=5000 -Djava.io.tmpdir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\tmp -Dweblogic.management.discover.retries=6 -DtestConfig.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\testConfig -Dsun.lang.ClassLoader.allowArraySyntax=true -XX:-UseSSE42Intrinsics -DUSE_JAAS=false -Djps.policystore.hybrid.mode=false -Djps.combiner.optimize.lazyeval=true -Djps.combiner.optimize=true -Djps.authz=ACC -Xverify:none -da -Dplatform.home=D:\fmwps6\WLSERV~1.3 -Dwls.home=D:\fmwps6\WLSERV~1.3\server -Dweblogic.home=D:\fmwps6\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=D:\fmwps6\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1 -Djrockit.optfile=D:\fmwps6\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=D:\fmwps6\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\fmwps6\ORACLE~1\modules\oracle.oamprovider_11.1.1,D:\fmwps6\ORACLE~1\modules\oracle.jps_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\oracle\store\gmds   -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\fmwps6\patch_wls1035\profiles\default\sysext_manifest_classpath;D:\fmwps6\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
Listening for transport dt_socket at address: 49879
Debugger connected to local process.
<Aug 16, 2013 7:19:43 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Aug 16, 2013 7:19:43 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Aug 16, 2013 7:19:44 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.51-b02 from Sun Microsystems Inc.>
<Aug 16, 2013 7:19:44 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for BUG13114768 Sat Jan 21 16:14:44 IST 2012
WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Aug 16, 2013 7:19:47 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Aug 16, 2013 7:19:47 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Aug 16, 2013 7:19:47 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Aug 16, 2013 7:19:47 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00115. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Aug 16, 2013 7:19:47 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Aug 16, 2013 7:19:56 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Aug 16, 2013 7:20:00 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Aug 16, 2013 7:20:00 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log00066. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log.>
Aug 16, 2013 7:20:05 PM oracle.ods.virtualization.engine.util.VDELogger info
INFO: Notification sent for Mapping config object reloaded
Aug 16, 2013 7:20:05 PM oracle.ods.virtualization.engine.util.VDELogger info
INFO: Notification sent for Mapping config object reloaded
<Aug 16, 2013 7:20:18 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Aug 16, 2013 7:20:18 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Aug 16, 2013 7:20:20 PM IST> <Warning> <JDBC> <BEA-001552> <The Logging Last Resource (LLR) data source InventoryTxDataSource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<Aug 16, 2013 7:20:22 PM IST> <Warning> <JDBC> <BEA-001110> <No test table set up for pool "mds-commsRepository". Connections will not be tested.>
<Aug 16, 2013 7:20:39 PM IST> <Warning> <Security> <BEA-090668> <Ignored deployment of role "Admin" for resource "type=<url>, application=DMS Application#11.1.1.1.0, contextPath=/dms, uri=/">
<Aug 16, 2013 7:20:58 PM IST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application UIMCMWSAdapter is not versioned.>
<Aug 16, 2013 7:21:11 PM IST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application oracle.communications.inventory is not versioned.>
<TableBuilder> <_buildSchema> Metric table "webcache:request_filter_denied_stats" has no key column. It will not be collected.
<TableBuilder> <_buildSchema> Metric table "reports:Reports_Server_Information" has no key column. It will not be collected.
<TableBuilder> <_buildSchema> Metric table "reports:Reports_Server_Performance" has no key column. It will not be collected.
<TableBuilder> <_buildSchema> Metric table "reports:Reports_Server_Response" has no key column. It will not be collected.
<TableBuilder> <_buildSchema> Metric table "reports:Reports_Servlet_Response" has no key column. It will not be collected.
<TableBuilder> <_buildSchema> Metric table "reports:Remote_Bridge_Elements" has no key column. It will not be collected.
<ConfigurationUtil> <getProperties> Could not load runtime-poms.properties
<Aug 16, 2013 7:21:52 PM IST> <Error> <Net> <BEA-000903> <Failed to communicate with proxy: www-proxy.idc.oracle.com/80. Will try connection www.terracotta.org/80 now.
java.net.UnknownHostException: www-proxy.idc.oracle.com
at java.net.Inet6AddressImpl.lookupAllHostAddr(Native Method)
at java.net.InetAddress$1.lookupAllHostAddr(InetAddress.java:876)
at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1229)
at java.net.InetAddress.getAllByName0(InetAddress.java:1180)
at java.net.InetAddress.getAllByName(InetAddress.java:1110)
Truncated. see log file for complete stacktrace
>
<Aug 16, 2013 7:21:53 PM IST> <Error> <Net> <BEA-000903> <Failed to communicate with proxy: www-proxy.idc.oracle.com/80. Will try connection svn.terracotta.org/80 now.
java.net.UnknownHostException: www-proxy.idc.oracle.com
at java.net.InetAddress.getAllByName0(InetAddress.java:1184)
at java.net.InetAddress.getAllByName(InetAddress.java:1110)
at java.net.InetAddress.getAllByName(InetAddress.java:1046)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:309)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:414)
Truncated. see log file for complete stacktrace
>
<LoggerHelper> <log> Cannot map nonserializable type "interface oracle.adf.mbean.share.config.runtime.resourcebundle.BundleListType" to Open MBean Type for mbean interface oracle.adf.mbean.share.config.runtime.resourcebundle.AdfResourceBundleConfigMXBean, attribute BundleList.
<AdfDiagnosticsJarsVersionDumpImpl> <dumpVersionInfo> Path of the jars version dump :D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\oracle.communications.inventory-Versions.csv
<FeatureUtils> <_resolveFeatures> Ignoring feature-dependency on feature "AdfDvtCommon". No such feature exists.
Warning: Starting ADF Library jar post-deployment on WebLogic Server. Is "provider-lazy-inited" init-param missing from LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not being used.
Started: ADF Library non-ADFJspResourceProvider post-deployment
Finished: ADF Library non-ADFJspResourceProvider post-deployment (millis): 223
<Aug 16, 2013 7:22:08 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Aug 16, 2013 7:22:08 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00118. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Aug 16, 2013 7:22:08 PM IST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 14.96.8.250:7101 for protocols iiop, t3, ldap, snmp, http.>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
But it doesn't list the server while deploying the application.
I don't see the issue in my office network. But I encounter this problem when I work at my home.
Ideally it should show the following lines after server is started:
DefaultServer startup time: 195467 ms.
DefaultServer started.
This is not happening if i run the server without network.
How can I fix this problem?
Thanks
Ravi

I see some message about a proxy. Have you checked that you can use the proxy from you network?
If not you should turn the proxy off.
Timo

Having issues with getting SQL Server Express to start services and run.

Good afternoon everyone,
I have been working on a 2012 R2 server getting ready to move databases to new hardware. I had SQL Server Express 2008 R2 running on this server with no issues. I was handed another software package that ran SQL Express 2012 and had to for compatibility
reasons. I have had multiple versions run on Server 2012 before with no issues. This time, not so lucky. When the installer from the updated package put on SQL Express 2012 it completed with errors ( error log posted at the end of post) and
would not allow me to run software. I then tried the db that I had installed on 2008 R2 and it also gave the same error as the 2012 version. IN basic terms the required services attempted to start and shut back down again. I have received
Error 1068 about database handles and error %%945. I know this db has plenty of space and the permissions were added for the Admin account to access both db's. I then uninstalled both versions and tried again, with the same errors listed when
I tried to start the services. I am thinking that a clean install would fix the issue however I am not certain what files/folders/reg entries need to be deleted or modified. I have researched all the errors I can find, however I am very
new with SQL anything so I know I am missing something. I also do not have an "E:" drive on this server (not sure why it is going there). Input would be very welcome as I am not certain where to go from here.
Thanks,
Matt
Error Log follows, server and domain names have been blacked out with ****.
2015-04-15 11:57:55.16 Server Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64)
Dec 28 2012 20:23:12
Copyright (c) Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
2015-04-15 11:57:55.16 Server (c) Microsoft Corporation.
2015-04-15 11:57:55.16 Server All rights reserved.
2015-04-15 11:57:55.16 Server Server process ID is 4104.
2015-04-15 11:57:55.16 Server System Manufacturer: 'HP', System Model: 'ProLiant ML350p Gen8'.
2015-04-15 11:57:55.16 Server Authentication mode is WINDOWS-ONLY.
2015-04-15 11:57:55.16 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Log\ERRORLOG'.
2015-04-15 11:57:55.17 Server The service account is 'NT AUTHORITY\LOCAL SERVICE'. This is an informational message; no user action is required.
2015-04-15 11:57:55.17 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\mastlog.ldf
2015-04-15 11:57:55.17 Server Command Line Startup Parameters:
-s "SQLEXPRESS"
2015-04-15 11:57:55.48 Server SQL Server detected 1 sockets with 6 cores per socket and 12 logical processors per socket, 12 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-04-15 11:57:55.48 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-04-15 11:57:55.48 Server Detected 8157 MB of RAM. This is an informational message; no user action is required.
2015-04-15 11:57:55.48 Server Using conventional memory in the memory manager.
2015-04-15 11:57:55.68 Server This instance of SQL Server last reported using a process ID of 7840 at 4/15/2015 11:57:47 AM (local) 4/15/2015 3:57:47 PM (UTC). This is an informational message only; no user action is required.
2015-04-15 11:57:55.68 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2015-04-15 11:57:55.69 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-04-15 11:57:55.72 Server Software Usage Metrics is disabled.
2015-04-15 11:57:55.73 spid5s Starting up database 'master'.
2015-04-15 11:57:55.79 spid5s 20 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2015-04-15 11:57:55.79 spid5s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2015-04-15 11:57:55.80 Server CLR version v4.0.30319 loaded.
2015-04-15 11:57:55.86 spid5s Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.
2015-04-15 11:57:55.89 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-04-15 11:57:55.91 spid5s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2015-04-15 11:57:55.91 spid5s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2015-04-15 11:57:55.94 spid5s SQL Trace ID 1 was started by login "sa".
2015-04-15 11:57:55.94 spid5s Server name is '********\SQLEXPRESS'. This is an informational message only. No user action is required.
2015-04-15 11:57:55.96 spid5s Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Binn\ftimport.dll'.
2015-04-15 11:57:55.96 spid5s Starting up database 'msdb'.
2015-04-15 11:57:55.96 spid9s Starting up database 'mssqlsystemresource'.
2015-04-15 11:57:55.96 spid5s Error: 17204, Severity: 16, State: 1.
2015-04-15 11:57:55.96 spid5s FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf for file number 1. OS error: 3(The system cannot find the path specified.).
2015-04-15 11:57:55.96 spid5s Error: 5120, Severity: 16, State: 101.
2015-04-15 11:57:55.96 spid5s Unable to open the physical file "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
2015-04-15 11:57:55.96 spid5s Error: 17207, Severity: 16, State: 1.
2015-04-15 11:57:55.96 spid5s FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf'.
Diagnose and correct the operating system error, and retry the operation.
2015-04-15 11:57:55.96 spid5s File activation failure. The physical file name "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf" may be incorrect.
2015-04-15 11:57:55.99 spid9s The resource database build version is 11.00.3000. This is an informational message only. No user action is required.
2015-04-15 11:57:56.02 spid12s A self-generated certificate was successfully loaded for encryption.
2015-04-15 11:57:56.03 spid12s Server is listening on [ 'any' <ipv6> 53345].
2015-04-15 11:57:56.03 spid12s Server is listening on [ 'any' <ipv4> 53345].
2015-04-15 11:57:56.03 spid12s Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS ].
2015-04-15 11:57:56.03 spid12s Server named pipe provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS\sql\query ].
2015-04-15 11:57:56.04 spid12s Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806.
This is an informational message only. No user action is required.
2015-04-15 11:57:56.04 Server SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational
message. No user action is required.
2015-04-15 11:57:56.04 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/********.****.local:SQLEXPRESS ] for the SQL Server service. Windows return code: 0xffffffff, state: 53.
Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been
manually registered.
2015-04-15 11:57:56.04 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/********.****.local:53345 ] for the SQL Server service. Windows return code: 0xffffffff, state: 53. Failure
to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually
registered.
2015-04-15 11:57:56.09 spid9s Starting up database 'model'.
2015-04-15 11:57:56.10 spid9s Error: 17204, Severity: 16, State: 1.
2015-04-15 11:57:56.10 spid9s FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf for file number 1. OS error: 3(The system cannot find the path specified.).
2015-04-15 11:57:56.10 spid9s Error: 5120, Severity: 16, State: 101.
2015-04-15 11:57:56.10 spid9s Unable to open the physical file "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
2015-04-15 11:57:56.10 spid9s Error: 17207, Severity: 16, State: 1.
2015-04-15 11:57:56.10 spid9s FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf'.
Diagnose and correct the operating system error, and retry the operation.
2015-04-15 11:57:56.10 spid9s File activation failure. The physical file name "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf" may be incorrect.
2015-04-15 11:57:56.10 spid9s Error: 945, Severity: 14, State: 2.
2015-04-15 11:57:56.10 spid9s Database 'model' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
2015-04-15 11:57:56.10 spid9s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.

Hi HMLunger,
Did you install the SQL Server instance successfully? If not, please help to post the summary and detail logs for analysis. By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
However, if you fail to start SQL Server Express service after successfully installing SQL Server,
you might have to change the paths of the files by running the following scripts from the command prompt. For more details, please review this similar
thread.
NET START MSSQL$SQLEXPRESS /f /T3608
SQLCMD -S .\SQLEXPRESS
ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
go
exit;
ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
NET STOP MSSQL$SQLEXPRESS
In addition, you can follow the steps in this KB article to uninstall SQL Server.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

OpenLDAP authentication provider with CA LDAP server

Hi,
I am trying to get authentication to work using an OpenLDAP AP connecting to CA LDAP server (formerly eTrust LDAP server). I am at the point where the bind is successful, the user account is authenticated in LDAP, but I am unable to retrieve the group information.
Here is the error for the group lookup:
####<Apr 8, 2013 9:48:33 AM CDT> <Debug> <SecurityAtn> <EPMDOWCS8> <ms1> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <01f9ee928bc01ecd:275c5c34:13dea1201e3:-7ffd-000000000000021d> <1365432513554> <BEA-000000> <[Security:090278]Error listing member groups myACID>
This is the final error, presumably because the group lookup failed:
####<Apr 8, 2013 9:48:33 AM CDT> <Debug> <SecurityAtn> <EPMDOWCS8> <ms1> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <01f9ee928bc01ecd:275c5c34:13dea1201e3:-7ffd-000000000000021d> <1365432513554> <BEA-000000> <javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User myACID denied
     at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:229)
     at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
     at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
     at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
     at javax.security.auth.login.LoginContext$4.run(LoginContext.java:684)
     at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
     at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
     at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
The CA LDAP server is pointed to a Top Secret database, so the attribute names are atypical as far as directory services objects are concerned. I've tried modifying the group and static group information to search both groups and profiles, but both fail. I've also tried omitting the static group information, and specifying dynamic group info, but that failed as well.
Here is the search it is running:
(&(memberOf=tssacid=myACID,tssadmingrp=acids,host=ourdevsysid,o=our.ORG)(objectclass=tssprofile))
Here the is the group based DN: tssadmingrp=profiles,host=ourdevsysid,o=our.org
The group search scope is subtree. I tried unlimited, and a limited of 2 levels.
If I execute the filtered search using a third party tool (JXplorer), I receive this error:
javax.naming.NamingException: [LDAP: error code 80 - LDP2900E Unknown attribute, , in filter string]; remaining name 'tssadmingrp=profiles,host=ourdevsysid,o=our.org'
     at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3085)
     at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2987)
     at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2794)
     at com.sun.jndi.ldap.LdapCtx.searchAux(LdapCtx.java:1826)
     at com.sun.jndi.ldap.LdapCtx.c_search(LdapCtx.java:1749)
     at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_search(ComponentDirContext.java:368)
     at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCompositeDirContext.java:338)
     at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:257)
     at com.ca.commons.jndi.JNDIOps.rawSearch(JNDIOps.java:1192)
     at com.ca.commons.jndi.JNDIOps.rawSearchSubTree(JNDIOps.java:1039)
     at com.ca.commons.naming.DXOps.rawSearchSubTree(DXOps.java:343)
     at com.ca.commons.jndi.JNDIOps.searchSubTree(JNDIOps.java:1030)
     at com.ca.directory.jxplorer.broker.JNDIDataBroker.unthreadedSearch(JNDIDataBroker.java:772)
     at com.ca.directory.jxplorer.broker.DataBroker.doSearchQuery(DataBroker.java:485)
     at com.ca.directory.jxplorer.broker.DataBroker.processRequest(DataBroker.java:253)
     at com.ca.directory.jxplorer.broker.JNDIDataBroker.processRequest(JNDIDataBroker.java:376)
     at com.ca.directory.jxplorer.broker.DataBroker.processQueue(DataBroker.java:200)
     at com.ca.directory.jxplorer.broker.JNDIDataBroker.processQueue(JNDIDataBroker.java:883)
     at com.ca.directory.jxplorer.broker.DataBroker.run(DataBroker.java:165)
     at java.lang.Thread.run(Thread.java:662)
When I execute that same search in JXplorer directly on one of the profile objects (e.g. tssprofile=@oneofourprofiles,tssadmingrp=profiles,host=a12sysid,o=tgslc.org), it runs successfully.
Here is an old post. Seems the op encountered the same problem I did.
authentication provider for CA eTrust LDAP server
Anyone work with these technologies in a past life?
Thanks,
Rob

Are you able to see the users in weblogic?Not for this AP. I have a ReadOnly SQL authenticator as well. I am able to see users for that, and for the Default Authenticator.
Have you assigned admin roles to the user in weblogic?No. I do not intend to do that, and I don't believe I am required to do that.
is the group base dn properly configured?Yes.

UCS C210 - Initial Configuration using DHCP

Hello All,
I'm trying to do the initial configuration for a C210 but we have no keyboard and monitor. So the idea was to use the default configuration on the Shared LOM, using DHCP. But i can't get an ip address.
We connected the server to the switch core, that is the DHCP server. The switch port is configured correctly. I can see the mac-address being identified by the switch, the LOM on the server is up, the switch port is up but cant get ip address.
So we are stuck right now, trying to get a monitor and keyboard.
Any clue on how to solve that?

Hello Rafael,
i just want to sharing
For initial configuration i always use DHCP, this is my tool
For 1or2 Cisco UCS C-series if more then 3 just add the switch
1. laptop
2. Cat6 cable (cross/straight its ok
3. tftpd32
step:
1. plug cat6 cable to laptop NIC port and to 1GB LOM C210 (dont power the c210)
2. run tftpd32
3. configure DHCP server
4. configure your laptop NIC with static ip address (same subnet with DHCP pool)
5. turn off firewall on laptop
6. power on C210
7. open tftpd32 and monitoring the IP address..
if c210 already power up or didnt get the ip address you should unplug the power cable and plug again and power on the c210..
you must plug the cat 6 to 1GB LOM (port 1 or 2 its OK but dont plug to MGMT port)

Issues with an LDAP server configured using DHCP instead of static.

Similar Messages

Maybe you are looking for