Idoc stuck on smq2
I have a scenario where sending idoc from SAP ECC to SAP PI without error, but to reach the SAP PI is not processed, in reviewing the TX SMQ2 the idoc gets stuck and I have to activate them manually to generate the XML, as I can investigate because automanticamnete not processed and remain in waiting to be done manually
Hi Leon,
You need to register and activate the queue by using T-Code SXMB_ADM.
Also check if ithe queue is unlocked.
By using the transaction SMQ2 you can reset the queue's status.
Set IS configuration parameter MONITOR QRFC_RESTART_ALLOWED to value 1.This will initiate processing of messages stuck in the queue
You can run RSQIWKEX to run periodically. It resets the queues automatically.
You have to go to SXMB_ADM. Then click manage Queues and you have to dergister all the queues. After doing this you need to go to SMQ2 and you have to actiavte the queues.
After all this try to re-register the queues in SXMB_ADM ..
Regards,
Rohit
Similar Messages
-
Messages getting stuck in SMQ2
Messages get stuck in SMQ2 with the Error msg "SQL error on database occurred when accessing a table".
This is happening on PI system 7.11 SP04 with Max DB version 7.7.06.07.
This typically happens when sending messages from one BPM to another although it has more of a random pattern.
A corresponding dump is also seen in ST22.
The dump details are as below:
Runtime error : DBIF_RSQL_SQL_ERROR
Exception : CX_SY_OPEN_SQL_DB
Database error text : Invalid numeric value for parameter/column (10)
Internal call code : "[RSQL/UPDT/SWFRXIHDR ]"
Any help is highly appreciated in resolving this issue.
Regards,
Murali Narayanan> The dump details are as below:
> Runtime error : DBIF_RSQL_SQL_ERROR
> Exception : CX_SY_OPEN_SQL_DB
> Database error text : Invalid numeric value for parameter/column (10)
I would update the kernel (plus the database interface library lib_dbsl) to the latest patchlevels and try again. If the error persists I'd upgrade the database to the latest patchlevel. If it still doesn't work I'd open an OSS call (BC-DB-SDB).
Markus -
Hi,
Our messages are stuck in SMQ2, and I think this is due to high volume of messages. I have configured the IS to allow the QRF_RESTART_ALLOWED to 1, and scheduled the RSQIWKEX job to run periodically. But, the messages are still stuck in SMQ2.
Does anyone know what are the next steps we should look into to solve this problem?
Any help is greatly appreciated.
Thanks,
KarmaJust try - go to SXMB_ADM->Manage Queues and Deregister all the Queues. Then go to SMQ2 and try to activate all the queues by selecting the each lines and with activate button.
Then re-register the queues in SXMB_ADM and chek it..
Problem may be because of workprocess related. Also check transaction ST22 for if any dump in XI box.
btw what is the scenario ? Is it because of huge message processing ?
Regards,
Moorthy -
MEssages Stuck in SMQ2 - Automation of moving error msgs
Hi ,
We face a lot of issues with messages getting stuck in SMQ2 and blocking all other messages.
Right now we Save the LUW and move it to SMQ3
but is there an automated way/ configuration to move the errore messages to a seperate queue.
Thank you.Hello Arvind,
Check SAP Note 441269.
You can monitor your queues and apply some automatic reaction when appropriate.
Maybe it can be useful.
Regards,
Diego Estanguini Gabriel -
In 4.6C, How to delete IDoc stuck?
Hi, experts
after I load more than 20000000 records data from R/3 side, I found out there are too many IDoc stuck in R/3 side use SM58.
How can I delete these IDoc in one time? the T-CODE 'WE11' and the program 'RSETESTD' can not use in my 4.6C system.RSETESTD.try BD87
-
Idocs stuck in workflow at status 51
Hi all,
There are lot of Idocs stuck in status 51 in workflow. Work flow error message reads as "Document OvershipCl does not exist". Can someone explain what does this mean and how do we clear these items.
Regards,
SantoshHi Santosh
You could also use transaction BD87 for further analysis and processing. This is more interactive. Please select the IDOC and on the left screen the the status record with entry 51 will have the details as to why the IDOC failed. Please correct as required in order that the IDOC will get processed.
Hope it helps. Please do assign points if found useful.
Regards,
Karthik -
Hello,
IDOC stuck in sm58 with error No authorization to send IDocs with message type
scenerio is FTP to IDOC. We are using Pi7.1 its simple secenerio can u pls let me know what is case how can we solve this.Hi Michal
do you not use the "Permitted Agent" then? or does that not have any affect at all???
Specifies the job (person or group of people) to be notified if processing errors occur on the IDoc interface. You can define up to three different jobs:
in the inbound or outbound partner profiles for special partners, messages and direction.
in the general partner profiles for special partners.
in the general IDoc Administration settings. -
I am trying to push multuiple IDOCs in IDOC to File scenario. But 1st time scenario is working fine. but next time IDOC is stuck up in queues. When I deleted from SMQ2, it works fine for next immediate IDOC transition and again for further IDOC processing all get stuck up in queue. Is there any idea about it.
hi,
As experts said
from SMQR register/degiester and activate the queues again.
also do you need to maintain the order of idocs.
if not uncheck the maintain order at runtime in ID.
refresh ur cache.
keep the thread updated.
many thanks -
File to IDOC stuck in the queue
Hi Expert,
I have a file to IDOC scenario. I checked in SXMB_MONI, I can see the file coming in. But it just stuck in the queue and won't send out to SAP system. When I checked the SMQ2, it tells me the status is "SYSFAIL'. I have checked my RFC, port, logical systems, profile etc. Just don't know where is wrong. Can somebody tell me what else I need to check? Thank you very much!
CharlesHi Charles
Check SMQ2 and double click on the queue with sysfail status.
It will show you a new screen with a more detailed error description.
Regards,
Giuseppe -
Proxy messages are stucked in SMQ2.Can I pass these msgs in separate queue?
Hi Guys,
File >PI>ABAP proxy. (ECC)
Once i pick and process the file, the resultant message is updating the table in ECC through ABAP proxy. These messages are high priority and they should not stuck in the queues in ECC.
The problem is some of the messages of this interface are getting stucked in queues (SMQ2) by colliding with other low priority messages which are failed due to some data issues.
Is there any way I can separate these high priority messages into separate custom queue and process them?
Do I need to this in ECC or PI?
Thanks
DeepthiHi,
As Debashis has already said, use message prioritization in PI to handle your requirement.
For SAP NetWeaver PI 7.0, navigate to SAP NetWeaver 7.0 SAP NetWeaver 7.0 Library SAP NetWeaver Library SAP NetWeaver by Key Capability Process Integration by Key Capability SAP NetWeaver Exchange Infrastructure Runtime Integration Engine Prioritized Message Processing.
For SAP NetWeaver PI 7.1 (including EHP 1), navigate to SAP NetWeaver SAP NetWeaver PI/Mobile/IdM 7.1 SAP NetWeaver Process Integration 7.1 Including Enhancement Package 1 SAP NetWeaver Process Integration Library Function-Oriented View Process Integration Integration Engine Prioritized Message Processing.
For more details about message prioritization within the Advanced Adapter Engine, please refer to SAP Help Portal http://help.sap.com, and navigate to SAP NetWeaver SAP NetWeaver PI/Mobile/IdM 7.1 SAP NetWeaver Process Integration 7.1 Including Enhancement Package 1 SAP NetWeaver Process Integration Library Function-Oriented View Process Integration Process Integration Monitoring Component Monitoring Prioritizing the Processing of Messages. -
Proxy messages are stucked in SMQ2 as scheduled status
Hi,
I am doing File(FCC) >PI 7.0>ABAP proxy. (ECC) Scenario.
Once i pick and process the file, the resultant message is updating the table in ECC through ABAP proxy. These messages are getting stucked in queues (SMQ2) in ECC. My message is not having much data , it is very less in size.
And there is no messages in Queue.
I register all queues in SMQR in PI and ECC.
Does I need to do any activity in ECC or PI? What could be a problem. Please suggest .
Thanks
AyubHi Venkata,
Thanks for very quick replay.
Are the messages stuck with any error?--> First I can see the Green Color Flag as scheduled status, I open the message I can see there is no error message.Bt when I have look at end of the message in SXMB_MONI at Q.Status , I can see Message Has error
In SMQ2 -->
Cl. Queue Name Entries Status Date 1 Time 1 NxtDate NxtTim Sender ID Wait for queue
200 XBTR0009 1 SYSFAIL 24.02.2012 10:53:34 24.02.2012 10:53:34 R3DEVQA_RDV_01
And when I double click the XBTR009 I can see the below message :
Cl. User Function Module Queue Name Date Time StatusText
200 ALEREMOTE SXMS_ASYNC_EXEC XBTR0009 24.02.2012 10:53:34 Screen output without connection to user.
This are status of the messages. Please help me.
Regards,
Ahmed -
Urgent:Idoc stuck with status 03 in TRFC
My Idoc is in status 03, but it is not reached to destination.
I guess It is stuck in Rfc layer or in some QUEUE.
There was quality system refresh last week here with Production system.
Pelase suggest what seetings need to be changed and where.
in SM58 it give the following error
'RFC address XXXXXXX doesn't exist'
(where XXXXXXX i m not mentioning here for Client security reasons)
is there any program to clear these layers?
Thanks a ton in advance and the answer will be adequately awarded.hi,
whnevr ur idoc is in status 03 just run the transaction BD75.
the status will be converted to 12 and datawill be passed.
reward points if hlpful. -
Messages stuck in SMQ2 Inbound Queue.
Scenario: File->XI->Proxy
When I put 50 files at the same time in a directory, channel is configured Exactly Once in Order and we have created queue with the name GATQUEUE. The messages are picked up from directory and sent one by one to BPM process. 31 messages out of 50 poccesed succesfully but 19 of them get stuck in the queue always. Though GATQUEUE is released lately but they are stuck in 'XBQO$PE_WS90000013' queue. This is seen in SMQ2 Inbound Queue.
Could you please tell me how to release this message which are already stuck and what bit of configuration required so that it works for 1000s of files/messages at a time?
Thanks
KHi Kiran,
Just add the below parameter in XI tcode : SXMB_ADM
Execure Integration Engine and Configuration.
Click on Specific Configuration, go to change mode
Click on New entries
Category : MONITOR
Parameter :QRFC_RESTART_ALLOWED
Current Value : 1
Save.
Regards,
Venu. -
Dear All,
I have configured a scenario Mail to PROXY Asynchronous. Process is working fine But every time transaction happen all messages are stuck in R/3 - ECC .
A developer needs to release these messages manually using SMQ2. what is the reason for this to happen every time ? Is there an alternative to skip this manual work ?
Below are the further details for the configuration done.
PI Mail Adapter (Sender )
Quality Of Service (Exactly Once)
Transport Protocol (POP3)
Poll Interval (1min)
XI Adapter (Receiver)
Transport Protocol - HTTPTharu Fdo,
Please check also below T-codes in ECC:
1.ST22-->ABAP Dump Analysis ,ABAP runtime errors(Proxy Code)
2.SM66-->(Background job is executed using one or multiple SAP work processes in sequence or in parallel dependent on program function and design and SAP work process is a limited critical system resource for performance like CPU and memory-Have a look at action column and identify any long running Sequential read/Direct read/insertion/updating).
3.ST12--remove the lock entries.
Mutti -
Hi,
I have an IDOC that is still being stuck in TRFC Queue. The status shows as '03', but I can see that IDOC in the TRFC queue. It is lying there for a month. I need to process that IDOC manually so that it goes to the other system. Which transaction can be used for that.
I tried with BD87 --- But here u have lot of other IDOCs also in TRFC and I cannot pick up only that one single IDOC from TRFC queue.
Please let me know the entire process.
Regards,
AnirbanHi Anirban,
Please go to transaction <b>SM58</b> and check if the IDocs are stucked up on the t-rfc queue. If so, you can right click and choose Execute LUW to release them.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.
Maybe you are looking for
-
SAP R/3 4.7e compatable with Netweaver foundation ?
Hi, could you please suggest me for below Queries . 1. Does IS-Media is very much compatable with 4.7e? 2. Will this present problems for us in any of the functionality we've been expecting? Does 4.7 have the same Netweaver foundation, integration wi
-
TV-out problem with a Qosmio G20 - Scart option disappeared
I have a problem with my video board and its driver. I have got a Qosmio G20 with a Nvidia GeForce Go 6600. Yesterday when I boot my notebook i have seen that some setting were disappeared. I have tried to connect the pc with the TV in the way descri
-
I cannot get my mail server to send messages out. I get the following error: Jan 14 08:36:47 mail postfix/smtp[23334]: 4C58B1887C2: to=<[email protected]>, relay=mx4.hrnoc.net[216.120.237.53]:25, delay=5.6, delays=0.06/0.04/5.5/0, dsn=4.0.
-
Dear Gurus, At my client side two complex scenarios are available, which required valueable feedback for resolution. 1. In standard SAP rebate offer to payer, but here Sold to party is "AAA" and rest of the function perform by "BBB" so invoice is pos
-
Dear all, I got the error in log file as the following : ORA-00600: internal error code, arguments: [kcbgtcr_4], [259591], [259299], [1152], [1], [], [], [] Errors in file /ora8163/home/admin/seven/udump/ora_19985_seven.trc: ORA-00600: internal error