IDoc - Wrongly Picking value for outbound.

Guru's
Once save the sales order, a out bound idoc will trigger and goto a non sap system.. till date its picking right values but now its not picking one number(that is year) <b>Voyage number</b> starts with year example 2007 is equal to 7 and other two digits  is serial numabre.. 701, 702, etc....now its not picking 7,  only taking 03, 04.. ...
any inputs...
Ramki

Debugging is the only option to find your problem.
Put breakpoint on segment which you are having problem. or user exit, if you have any.
If you are not familiar how to debug for outbound idocs do the following steps.
1) Cllick header-->output
2) Repeat output type
3) Select output type and click Further data and select dispatch time to 1(Send with periodic schedule job).
4) Save.
5) Go to Transaction WE15 or execute RSNAST00 program
6) Select your output type..input object key-->nothing but document number(eg..sales order number).
select output type and transmission medium.
7) Now cursor stop at your break point".
"Rewards point if usefull"
Thanks,
Narayan

Similar Messages

  • Report not picking value for segment reporting

    Hello,
    The PA report is not picking up the carry forward value. I have checked the following.
    1)in FS10N  balance carry fwd has been done.
    2)2keh Profit center carry fwd actual balance has been performed
    3)KE5Z Chk a/c wise transaction, it is showing that PA documents exist
    The program was developend last year December and it had picked the correct value for the same (cumulative value).
    Kindly let me know what could be the possible reason. Any pointer for the same will be highly appreciated.
    Thanks & Regards
    Jyoti

    self answerd

  • Wrong SNMP values for ciscoEnvMonSupplyStatus

    Hello everyone,
    we are facing the following issue: the SNMP poll is showing wrong values for ciscoEnvMonSupplyStatus when at the same time the "show env all" shows that there is nothing wrong with the power supplies.
    Here is the example:
    ciscoEnvMonSupplyStatusDescr.1057   Sw1, PS1 Faulty, RPS NotExist                  OctetString                  192.168.49.28:161
    ciscoEnvMonSupplyStatusDescr.1058   Sw1, PS2 Faulty, RPS NotExist                  OctetString                  192.168.49.28:161
    ciscoEnvMonSupplyState.1057                                     notFunctioning (6)                        Integer                          192.168.49.28:161
    ciscoEnvMonSupplyState.1058                                     notFunctioning (6)                        Integer                          192.168.49.28:161
    ------------------ show env all ------------------
    FAN 1 is OK
    FAN 2 is OK
    FAN PS-1 is OK
    FAN PS-2 is OK
    SYSTEM TEMPERATURE is OK
    System Temperature Value: 31 Degree Celsius
    System Temperature State: GREEN
    Yellow Threshold : 46 Degree Celsius
    Red Threshold    : 60 Degree Celsius
    SW  PID                 Serial#     Status           Sys Pwr  PoE Pwr  Watts
    1A  C3KX-PWR-350WAC     AZS161803GQ OK              Good     Good     350/0
    1B  C3KX-PWR-350WAC     AZS161803GT OK              Good     Good     350/0
    I have seen that this is a more or less a known issue and there are plenty of bugs for it, but exactly for our hardware and IOS (C3560E Software (C3560E-IPBASEK9-M), Version 15.0(2)SE2, RELEASE SOFTWARE (fc1)) I cannot find any exact information.
    Please, advice if we are hitting some known bug which I cannot locate.
    Thanks,
    Vesselin
    SW  Status          RPS Name          RPS Serial#  RPS Port#
    1   Not Present     <>

    Hi ,
    I have issue while generating alerts for the CISO nexus device.
    snmp laert tool: Solarwinds error : The OID is not supported,
    Can anyone tell me the OID for the CISCO nexus 2k, 5K devices.
    I am trying to generate the Temp alert.
    THANKS

  • FM returns wrong total value for Limit type PO's

    Hi all,
    I am working on SRM 5.0 (SP13) ECS.
    I have implemented the BADI "BBP_WFL_APPROVAL_BADI" for determining the Approvers for PO whenevr a PO is changed.If the diference between the Old PO value and new PO value is > 1000 and the approval text field(custom text under "Documents" link) is set to "YES",then the WF approval is required and the approvers are determined.
    The above logic works fine for the Standard type PO's where the difference between the old value and new value is determined using FM "BBP_PD_PO_GETDETAIL"  by passing the GUID (for the change version and the active vesion) obtained at runtime in the BADI.
    However for the limit type PO's,whenevr I change the total value for the Limit item,I see that the FM "BBP_PD_PO_GETDETAIL" doesnt return the changed value but  always returns blank!
    Bcause I need to check bth the values i.e. Custom text set to "YES" as well as Total value diff ,I cant use the start conditions in tcode SWB_COND.ALso I need to fetch the approvers based on the price diff so I need this value at runtime in the BADI using the FM "BBP_PD_PO_GETDETAIL".
    Please advise why the FM is not returning the changed values for the Limit type PO and is there any other way(other table/FM) to get the changed value at runtime for the LIMIT type PO.
    Thanks for your time.
    Edited by: Rads1234 on Nov 18, 2010 4:39 AM

    Thanks for the rpely.
    Yes.I am using the GUID available at runtime in the  BADI "BBP_WFL_APPROV_BADI" which is the current change version GUID.I tried using that GUID to get the data from both FM as well as CDHDR and CDPOS tables.
    I think this is something related to LImit type PO because for Standard type PO's the FM returns the corretc changed value (as in the screen) for the change version GUID.I fail to understand why the changed values are shwon on the screen but are not stored anywhere in the system before actually ordering the PO!

  • Wrong ASCII values for control characters in Variables and Stack Call in CVI2013?

    Hi,
    I think there is an error in  "Variables and Call Stack" window if you want to look for your variables in ASCII format.
    The control characters (0 -  31) are not shown correct. They are shifted 2.
    For example:
    Character in Decimal format is 10 (LF) but when you are chancing to ASCII format it is showing \012.
    The same with 13 (CR). This character is \015 in ASCII format.
    I think that was no problem in CVI2012.
    Best regards
    Gunther
    Solved!
    Go to Solution.

    I'm not using CVI2013 yes so I cannot respond regarding this specific product, but the code you are showing are the octal equivalent of the decimal value you specified: it could be that control characters (or generally speacking non-printable ones) are replaced with their octal equivalent in string view.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • Wrong commitments value for a wbs element

    H Experts
    I have a WBS element and entered a PO commitment with subsequent partial GR and IRs.
    But my cooitment report does not get reduced with subsequent IRs and it got updated with first IR only.
    Please suggest what would be the reason for wrong commitment report.
    Thanks
    ramSiva

    run the programs RAKNBU01and  there is a note  for incorrect committments........... 1491430     Incorrect Commitments for Service Items and
    1492317     Incorrect commitments after posting service entry sheet
    Edited by: reena ghadge on Nov 25, 2011 12:54 PM

  • Wrong Depreciation value for subsequent years for further acquisition

    Hi All,
    Need immediate help...I have a dep key with Unit of Produciton. The method being used is Usage/Remaining and the Base Value is 24 - Net Book Value.
    I had posted an acq. on 01.01.2009...it depreciates perfectly as per my usage--say till period 5. Then another acq. was posted in july - and was consumed fully in Feb 2010..
    Another acq. was posted in May, 2010...Now my dep for period Jan and Feb is getting reversed and Dep. on Base Value - Balance Carried forward and New Acq - is being calculated, although i had exhausted my balance in Feb itself.
    I do not want to go by Sub Assets route...
    Why is such a calculation being done???

    Hi Kartik
    Thanks for showing interest in my query...If i am not worng, SAP note mentions to change everything to Start of the year...i had tried it but was of no help.
    Regards
    Ankit

  • IPhone uses wrong exchange account for outbound email

    I have two Exchange accounts that I need to keep separate. I cannot figure out how to get iOS to not send ALL outbound emails through one of the accounts. If I'm in Exchange account "A", I want outbound emails to go out through A... if in B, then B. This use to work fine but now all outbound email goes through account A.
    In the email, I can set the account, but regardless of the account I choose, it always goes out from account "A".
    Any thoughts on how to solve?

    Same problem here, same situation - two accounts on one iPhone. No matter which acct used for sending all outbound emails had account "A" for address. I checked all the options in settings and in the email send for choosing the correct account but all email was delivered from "A" no matter what.
    I discovered that the default "A" account was setup for SMTP but the "B" account did not have SMTP validated. It showed a password but it also showed account "A" as a secondary SMTP server.
    I took account "A" off account "B" as a secondary SMTP server. The next email sent from "B" required a password. When I opened settings, completed the password for "B" and the SMTP server validated.
    Now email sent from "A" is delivered from "A", email from "B" is delivered from "B".
    Thanks for pointing me to the solution!

  • Dispatcher count values for scheduling downtime in oracle b2b 11g

    Hi all,
    I would like to know if anyone has implemented scheduling in oracle b2b. Please share your suggestions.
    1) What should be the value for 'Outbound Dispatcher Count' & 'Inbound Dispatcher Count' in case of outbound & inbound transactions for large transactions. How do we define this value? Can you give some ratio for this value to this number of transactions? Currently we expect around 8000 messages to flow in span of two hours.
    2) What could be the performance issues that we can come across if any after we are done with this setup ?
    Thanks

    8000 messages in 2 hours is not a huge load. Please set the below values before configuring downtime -
    Outbound Dispatcher Count = 1
    Auto Stack Handler= true
    Auto Stack Handler Interval= 1
    'Inbound Dispatcher Count' is not used for downtime feature.
    There will be no impact on performance.
    Regards,
    Anuj

  • FM for outbound payment idoc

    Hi,
    How do we find out the FM for outbound payment idoc?.Here are the details
    Message type-PAYEXT
    Idoc type-PEXR2002
    Thanks,

    This thread is was last replied more than a year ago, but I'll add a little just to contribute.
    WE60 documentation for the IDocs don't really give much except field / segment
    information,  but don't talk about where the fields come from.
    FI_EDI_PAYEXT_PEXR2001_OUT seems to be the right FM, not sure how it relates to IDoc type pexr2002 as 2001 is the older version, but perhaps it handles the difference somewhere inside.
    As to where certain segment fields come from (i.e. the mapping to master data fields...) , I've been debugging and still in progress.
    I have not been able to find any straight forward mapping, and my comments at the moment are:
    For any particular segment field of PEXR2002, take a look at FM :
    FI_EDI_PAYEXT_PEXR2001_OUT
    to see how it populates the field.  Chances are, the values come from the tables REGUH/REGUP/REGUV.
    The payment run process as far as my knowledge is concerned is as follows:
    1) Payroll Run -> Stores to table BT
    2) Pre DME (e.g. trx PC00_M08_CDTA) picks data frm BT and creates payment data in REGUH / REGUP / and REGUV tables. This gives you an identification feature ID for the next step.
    3) RFFOEDI2 changes status field in REGUH for particular payment data record based on ID from step 2.. this enables it to be picked up in the next step.
    4) RFFOEDI1 converts the record in REGUH into an IDoc which can be processed in BD87.
    I have debugged from step 4 backwards to step 3, i.e. I know that segment field X comes from REGUH field Y. Now I have to debug step 2 to find out how it populates REGUH field Y. If this comes directly from master data, then that makes life easier. But if this REGUH field Y comes from table BT of step 1, then perhaps I have to debug the payroll run somewhere. (Nightmare?
    Anyway, if anyone knows better, please advise.

  • Value for IDoc Segment field SEGMENT

    Hello,
    In the Integration Repository, while creating Message Mapping between a flat file (inbound) & an IDoc (outbound), I'm getting an error that not all target fields are mapped. In the target structure (IDoc), each segment has a field named <b>SEGMENT</b>. Can someone please tell me what value should go here. These are not part of the IDoc but seem to be a requirement in XI message mapping.
    There is also a segment called <b>BEGIN</b> (<u>Type</u> - xsd:string) which is defined as required. Please write as to what should be populated in this segment.
    Any help is greatly appreciated.
    Thanx in advance.
    Homiar.

    My current scenario is
    File Adapter -
    > XI -
    > SAP R/3 (Idoc Adapter).
    I will be using FIDCPP2 IDOC.  
    1. For an instance following is the structure, in this case how can I achieve getting a set of data in one IDOC and another set in other IDOC based on document no.
    CC        Doc No.        line items        
    UK01         456                 1
    UK01         456                 2  -
    > IDOC 1
    UK03         456                 3
    UK04         450                 1
    UK04         450                 2 -
    > IDOC 2
    UK04         450                 3
    i). Is there any way to create instances of idocs in XI or any alternative way out.
    ii). Where/ how can I give the condition, that based on Document No. should create another IDOC instance.

  • Create TO automatic by using wave pick for outbound delivery NLC (STPO)

    Dear all,
    In Cross company code process, we have to create TO automatic by using wave pick for outbound delivery NLC (delivery type NLCC). Time data in outbound delivery NLC have been fulfilled, but there is no TO created, what is wrong in this? pls help.
    Thanks

    Hi Kishor,
    Is there any requirement of TO when ECC system is Interfaced to EWM.
    As per my understanding we have terminology WT & WO in EWM.
    Regards,
    Rock

  • BAPI_PO_CHANGE does not change LIMIT value for service PO with ref to IDOC

    Hi,
    I am trying to change the limit values for both ACCTASSCAT (K) and item cat (D ie service PO) with ref to message type PORDCH IDOC type PORDCH02, the IDoc is getting posted but the PO is not getting updated ie LIMIT value is not getting change and returning msg "No data changed".
    Could you please provide the way to change LIMIT value.
    Regards,
    Mojammil Khan

    Are you really sure that your IT_SCH has the same fields like POITEM?
    the delivery date and statistical delivery date are located in the schedule tab in ME23N and stored in the schedule table EKET, not in EKPO where the PO item data is stored.
    I think you should assign your IT_SCH to POSCHEDULE

  • How to trigger FIDCCP02 idoc for outbound vendor invoices?

    Hi
    1. How can i trigger the idoc FIDCCP02 for outbound processing? I am trying to use this idoc to send the vendor invoice data to another system.
    2. How do i send existing data from sap to another system thru idocs?
    pls give me the steps.
    Regards
    Sujai

    Hi Sujai,
    First you have to fill the your data into a table which is like the structure of EDIDD.Here you have to fill the all segmetns in the sequence which defined in the idoc type only other wise you will get error 26.
    Then pass the control record data in the structure like EDIDC here you have to fill the sender,receiver,partner profile,idoc type message type like stuff.
    Then pass these table and structure to the function module MASTER_IDOC_DISTRIBUTE.
    Then idoc will created by above funciton module.
    If you want pass data in xml format then you have to create xml port in we21 and pass this port name in the EDIDC structure.
    Thanks,
    radha.

  • Can you set default values for person/group picker fields? To current user?

    Two-part question/issue . . .
    Part 1:
    In InfoPath 2013 in use with SharePoint 2013, how do you set a Default Value for Person/Group Picker fields? Other field types like Text Boxes have a Default Value section in the Data tab of Properties.  There doesn't appear to be any equivalent for
    the Person/Group Picker field type in Properties.  I'd like to set a default person for a few fields in a form I've created.  Is this possible?
    Part 2:
    The default user I want to set for one of those Person/Group fields is the "current user."  I want a user to log into our SharePoint 2013 intranet, load a new form for edit/creation, and have one of the Person/Group fields in that form to
    automatically populate this particular user.  Is this possible?

    Hi Stephen,
    You can auto populate your InfoPath farm with current user Name and all other property that you have in your User profile, you have couple of options.
    First you can make a secondary connection in your InfoPath form with user profile and can use the UserProfileService.asmx and call the GetUserProfileByName method. Here is the steps you can follow.
    http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx
    Secondly you can use JQuery and SPServices ,
    $().SPServices.SPGetCurrentUser function to populate the values with script to achieve the same in this case you no need to use InfoPath form just create simple text type column in SharePoint
    list and auto populate it with getting the current user Name from User Profile here is the scripts
    <script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery-1.4.2.min.js"></script>
    <script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery.SPServices-0.5.4.min.js"></script>
    <script language="javascript" type="text/javascript">
    $(document).ready(function() {
      var userCurrentName = $().SPServices.SPGetCurrentUser({
        fieldName: "CurrentUser"
      $("input[Title='CurrentUser']").val(userCurrentName);
      var userPhone = $().SPServices.SPGetCurrentUser({
        fieldName: "WorkPhone"
      $("input[Title='Phone']").val(userPhone);
    </script>
    Krishana Kumar http://www.mosstechnet-kk.com

Maybe you are looking for