Idocs- not to overwrite client data

Hi all,
I am using CREMAS03 and I have an interesting requirement.
I am using file port, so on the load side I have a conversion program which manipulates idoc file and creates idocs from it.
The requirement is that I have to retain the basic data ie client level data  ( like LFA1 , LFB1 etc) and extend views like LFM1 etc.
I tried with the MSGFN field but it didnt work.
Does anyone has any idea ?
Thanks & Regards,
Ankur

Hi Ankur,
Just a thought, since you say you have a conversion program that creates the IDOCs.
Can you read the client data of the vendor and fill the corresponding segments of your IDOC with the selected data and then use the file contents for the extended view data segments? Basically ignore what you are getting on the file as far as the client data is concerned, yet fill the corresponding IDoc segments from the database.
Hope this helps,
Srinivas

Similar Messages

  • INBOUND IDOC not updating the basic data field which is created newly

    Hi,
    i am creating an inbound IDOC for material master creation in that in basic data1 i have created 2 custom field in general data 1 is updating and another  is not updating with the value in iDOC.
    User exits codes are fine. but data is not updating.
    can some one help hw to resolve this..
    regards,
    thanigai

    Hi,
    Are you Debug the function module in  Process code of IDOC and use COMMIT WORK in that Function module.

  • Proxy MP Submitting Client Data

    My question is to know the flow of Proxy MP in SCCM 2012. I have a doubt proxy mp will contact Primary MP or not. Please correct me here am i right or wrong on the below points for flow of proxy Mp while collecting data from Client
    1)  The Proxy MP in sccm 2012 collects the inventory data, discovery data and status message
    2) The Proxy Mp will hand over to SQL DB in secondary server.
    3) The Secondary site SQL DB will replicate this data via Database replication.
    Another Thing can i use the terminology "Proxy MP" for MP in SCCM 2012 " .
    2Q) How does policy collects by Proxy MP in SCCM 2012.

    First, no the MP is no longer a "proxy" MP in 2012 as it does not proxy requests for policy.
    1) Correct
    2) Incorrect. The DB on a Secondary site is not for any client data whatsoever. It simply stores policy and a subset of other data needed for client operation in the DB. Inventory and other messages submitted by clients to an MP on the secondary site server
    is forwarded to the primary (I honestly don't know if this is done directly to the primary site DB or via a primary site MP although I think the former).
    3) Incorrect. See #2. The DB at a secondary site is effectively a read-only copy as far as the clients are concerned.
    2Q) Not sure what you're asking here.
    Jason | http://blog.configmgrftw.com

  • In 4.1 BO Client Tools not able to find data source  for BVM

    Hi All,
    In 4.1 BO Client Tools not able to find data source  for BVM
    Its creating issue .
    So if any body have any solution please let me know.
    Regards,
    Abhishek

    java.lang.NoSuchMethodError: org.w3c.dom.Node.getTextContent()Ljava/lang/String;
         at customertree.XmlLoader.readData(XmlLoader.java:127)
         at customertree.XmlLoader.<init>(XmlLoader.java:69)
         at customertree.CustomerTreeFinal.jbInit(CustomerTreeFinal.java:240)
         at customertree.CustomerTreeFinal.init(CustomerTreeFinal.java:858)
         at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source
         at java.lang.Thread.run(Unknown Source)and then inside the code... this is where i get my first error
    clients.setRowId(list2.item(i).getTextContent());

  • Outbound IDOC not getting triggered while new master data is created

    Hi Experts,
    I am trying to trigger an outbound idoc for Cost Center master data when ever cost center is being created or cost center is being changed. (Usinf COSMAS)
    I have successfully made use of change pointers and now able to trigger the idoc when ever Cost Center is getting changed. But while creating new Cost center, IDOC is not getting triggered.
    I used the function module MASTERIDOC_CREATE_SMD_COSMAS for triggering the idoc.
    Could one of you please let me what would have gone wrong? Since IDOC is getting triggered while changing the master data but not getting triggered while creating new master data.
    Thanks in Advance,
    Vinoth

    Hello,
    when you activate BD21 for a message type, it creates a entry in the SAP tables. that these Cost Centers have been sent already and any susequent changes to this will trigger a IDoc.
    As for BD16, scheduling it wont help as, you need to specify the selection criteria, and i do not see how you will be able to dynamically get the selection criteria.
    Try BD95, and BD59 to create a change pointer for a field, so when ever this fields is modified (new/updated) an idoc will be triggered.
    regards,
    Abhishek

  • Some client data not being populated after upgrading to NCS 1.1.0.58

    After upgrading to Cisco Prime NCS 1.1.0.58 some of the client data is not being populated or gathered. The graphs labeled "Client Count By Association/Authentication" and "Client Count By Wireless/Wired" are no longer being updated? Not sure what was changed during the upgrade or where to look to get it to start collecting the data again?                  

    Eajackson,
    Make sure your WLC, MSE and WCS/NCS code matches the compatibility matrix here:
    http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
    Sent from Cisco Technical Support iPhone App

  • Info IDoc  : sent, not arrived ; Error passing data to port

    Hi Folks,
      While I am loading the data from R/3 I am facing the following error in Production..
    Info IDoc 2 : sent, not arrived ; Error passing data to port
    when I checked in SM59 every thing seems fine like RFC test connection and authorization check
    In BW is check the Source system saying it is Ok.
    Only the thing I found here is in TRFC, it is error when opening RFC Connection.
    but it is different in SM59 saying every thing is ok, as said above..
    Please help me in this regard
    thanks masters
    DJ

    Srinivas,
      Thanks for your prompt reply..
    user : ALEREMOTE  and password are fine..
    As told I check st22 and sm21 in both sytems, no sort dumps I found..
    Please help me its an urgent..
    thanks
    DJ
    Message was edited by:
            Jangareddy dasari

  • Migrate client data from Notes to Exchange 2010

    Hello!
    We have no administrator access to Lotus Notes server and therefore we want to perform the client data (mails and contacts) migration. We need to move the mails
    from Notes (8.5) to Outlook (2010 or older which will be connected to Exchange 2010).
    Question: is it possible to do it without purchasing additional migration software? If yes, then what is the best way to accomplish this?
    Thanks!

    DAMO 8.0.2 supports Outlook 2007
    It is available in two places:
    (1) The IBM Passport Advantage Website.
    (2) Located on the Lotus Notes "All Clients" CD in the Apps folder.
    Is there an 8 release of Domino Access for Microsoft Outlook?
    https://www-304.ibm.com/support/docview.wss?dc=DB520&rs=3025&uid=swg21265830&context=SSPQ69&cs=UTF-8&lang=en&loc=en_US&rss=ct3025lotus
    MCTS: Messaging | MCSE: S+M

  • BC4J Client Data Model Definition Wizard does not dismiss

    I'm a newbie trying to learn JDeveloper on my own to advance my career. I am following examples given in the Oracle9i JDeveloper Handbook by Koletzke, Dorsey, and Faderman. Everything has worked great so far until now. With the BC4J Client Data Model Definition Wizard, I make it all the way to the last screen and press "Finish". The message window displays several lines of compilation type messages concerning my BC4J components and ends with something along the lines of "compilation success, errors = 0". The appropriate .cpx file gets created and appears under the project in the navigator. However the Wizard never dismisses no matter how long I leave it open (30 hours and counting), and if I open the .cpx file in a text editor, it is empty. It's as if the processing gets hung and never completes. What am I missing and/or where do I look for additional error messages or help??

    Anyone know what I'm talking about?

  • Idoc not showing in R/3

    Hi,
    Iam Currentl running File to Idoc interface. Message is success in moni also and runtime workbecnh also. But when iam checking R/3 using WE19 tcode by giving date its not showing . It showing like no values found. Can anybody tel me what is the reason?

    Hi,
    Dont seach with IDOC no in R/3. Check in WE02 transaction not WE19
    Search by Date only ........then go under your INBOUND  IDOC type node in WE02 in ECC. Also Please check the ECC client no you are posting the IDOC.
    Please be confirm in SLD your ECC business system client . And search the IDOC in ECC in same client no.
    You can also chek in ID check Adapter Specific Message attributes for ECC business system & also click the Compare with SLD Option.
    You can found this option after opening Business system in ID from menu.

  • IDoc not received in MII

    Hi All, 
    I am using SAP MII 12.1.5 Build 87. 
    I am facing problem with iDoc Listner we have configured iDoc Listner properly in SAP ERP, SAP NW and in SAP MII. 
    We are able to send iDoc from SAP but we are not able to receive same in MII. 
    Port and iDoc Server is giving status connected previously it was working fine in SAP MII 12.1.5 Build 83. 
    Following are the log details for SAP MII Logger as well as SAP NW Log. 
    SAP NW Log: 
    Error processing JRA IDOC message  
    SAP MII Log: 
    Error processing JRA IDOC message  
    Error processing JRA IDOC message [server=xxx, client=xxx]  
    [EXCEPTION]
    java.lang.NullPointerException
    at com.sap.xmii.ejb.JRAListenerBean.onMessage(JRAListenerBean.java:130)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MessageListenerType.invoke(Interceptors_MessageListenerType.java:110)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Lock.invoke(Interceptors_Lock.java:21)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
    at com.sap.engine.services.ejb3.runtime.impl.MDBProxyInvocationHandler.invoke(MDBProxyInvocationHandler.java:77)
    at $Proxy943.onMessage(Unknown Source)
    at com.sap.mw.jco.jra.idoc.JRAIDocExtension$IDocMessageHandler.onMessage(JRAIDocExtension.java:72)
    at com.sap.mw.jco.jra.JRA$ReaderThread.sendDirectToMdb(JRA.java:6641)
    at com.sap.mw.jco.jra.JRA$ReaderThread.sendAsynchRequest(JRA.java:6601)
    at com.sap.mw.jco.jra.JRA$ReaderThread.handleRequest(JRA.java:6771)
    at com.sap.conn.jco.rt.DefaultServerWorker$RequestDispatcher.handleRequest(DefaultServerWorker.java:989)
    at com.sap.conn.jco.rt.DefaultServerWorker$RequestDispatcher.handleRequest(DefaultServerWorker.java:967)
    at com.sap.conn.jco.rt.DefaultServerWorker.dispatchRequest(DefaultServerWorker.java:142)
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.dispatchRequest(MiddlewareJavaRfc.java:2927)
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.executePlayback(MiddlewareJavaRfc.java:2659)
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.playbackTRfc(MiddlewareJavaRfc.java:2478)
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.handletRfcRequest(MiddlewareJavaRfc.java:2362)
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.listen(MiddlewareJavaRfc.java:2207)
    at com.sap.conn.jco.rt.DefaultServerWorker.dispatch(DefaultServerWorker.java:259)
    at com.sap.conn.jco.rt.DefaultServerWorker.loop(DefaultServerWorker.java:322)
    at com.sap.conn.jco.rt.DefaultServerWorker.run(DefaultServerWorker.java:220)
    at com.sap.mw.jco.jra.JRA$ReaderThread.run(JRA.java:7260)
    at com.sap.engine.services.connector.jca15.work.TaskImpl.run(TaskImpl.java:255)
    at com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
    at com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
    at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
    Please help me out on this issue.                                         
    Regards,
    Manoj Bilthare
    Edited by: Manoj Bilthare on May 19, 2010 12:57 PM

    Hi Manoj,
    Once you have configured your Listener have you checked pressing the update button and i dont want to ask you which version of NW SP you have installed as you said it was working for you with Build 83, but nevertheless NW SP Level should not be not less than SP3.
    If this doesn't help you,please try  restarting your server again.
    How about the credential editor have you configured this as well?
    Regards,
    Sudhir Kumar
    Edited by: Sudhir Kumar Shambana on May 19, 2010 10:46 AM

  • IDOC not there in WE02

    Hi Gurus,
    I am doing a FILE TO IDOC scenario for taking Material Master data from the MDM system and posting the IDOC into the R/3 system..
    The entry is there in MONI with the chequred flag but there is no IDOC in we02 of the R/3 system.
    Also , i pasted the payload from teh MONI and checked in the mapping and the test was shown to be successful.
    Can Anyone please tell me what can be the cause and its probable solution?
    Thanks in advance,
    Shweta.

    (1) Error Category - CO_TXT_OUTBINDING_NOT_FOUND
    The problem is in Technical routing.
    Check whether the receiver determination and interface determination objects are active in change lists tab. If they are not active, activate the objects.
    Also check the if the receiver determination and interface determination objects are referenced to the same namespace or not. Sender and receiver interface objects should always refer to the same Namespace.
    (2) Error Scenario - ATTRIBUTE_IDOC_METADATA
    Check the receiver communication channel (Created using IDOC adapter). In this communication channel check if the two mandatory parameters are passed correctly.
    Following is further info on those two mandatory parameters.
    (i)Check if the RFC destination which is created in XI to connect the target SAP R/3 system is working fine.
    (ii)Check if the port that has been created in XI is in the form SAP<SID of R/3 system>. If not, create in the form of SAP<SID of R/3 system>. To this port, specify the above RFC Destination.
    (3) Error Scenario - IDOC not yet created in target SAP R/3 system.
    Go to R/3 system and check at Tcode WE05 if the IDOC has been created successfully. If error is u2018"Partner profile not configured" check point 9.
    Suppose IDOC did not get created at R/3 end and all the pipeline steps were successful in SXMB_MONI, then go to Tcode : IDX5 in XI and click on Transaction ID field and check the status description which explains the problem.
    (4) Error Scenario - Partner profile not configured.
    Go to Tcode WE20 in R/3 system and check if the partner profile has been configured correctly and is filled with the inbound parameters.
    regards
    chandra

  • IDOC not displayed in WE05

    Hi Experts,
    I have successfully run my scenario CSV-pi-Idoc yesterday. IN MOni XML file is Ok. In R/3side (WE05) Idoc generated successfully. But Yesterday night Basis people change R/3 password. Now my problem is in R/3 IDOC not displayed in WE02.
    Iam also change password in SM59. But no result. Where can I do changes. can any one help me.
    Thanks
    Hari

    Hi Hari,
    Make sure in SXMB_MONI in your PI system the message is showing successful flag in outbound side (ie.. drag the scroll bar to ur right had side and see if you can see checkered flag). If you see any error then go to tcode sm58 (trfc queue) and filter based on dates and u will find error logs in detail and take appropriate action.
    Mostly it might be authetication problem so better to check in ur R/3 destination in Sm59 in PI system if your rfc test and authentication test is successfully showing green or not.
    Thanks,
    Prasanthi.

  • Idoc Not received?

    Hi
    During data loading , I got one Error that Idoc Not received.
    What will be the cause of problem and How to resolve it?
    Regards & Thanks
    Durai

    Hi Robert Negro !
    I checked  , Dump has been there.
    How can I resolve?
    what will be other causes apart from the Dump?
    Thanks A Lot .
    Regards
    Durai

  • Issue with DEBMAS IDoc,not all fields are reflected in the IDoc Seg E1KNB1M

    For IDoc type DEBMAS, there is a segment E1KNB1M. This segment is relate to the customer correspondence details (XD02 -> company code data -> Correspondence).
    For any change to the customer master a DEBMAS IDoc is triggered which has data in segments including the E1KNB1M.
    In my case for few customers, the not all fields in the segment E1KNB1M contain data. Few fields contain data but the rest are filled with u2018\u2019. This is happening only in the production system, for the same customer in the quality system the data is there as required.
    I checked in debugging, and found that the data is correctly passed to the segment in program SAPLVV01 Include LVV01F01. And the segment contains data till the IDoc is triggered.  I.e. the fields are not getting cleared at any point.
    Can anyone suggest what is happening and how to fix this? Please note that the issue is only in the production system and not in the quality system ( for the same customer).

    BTT... Need some help on the above

Maybe you are looking for

  • Can't run very simple DOM parsing source on my machine - please help :(

    Hi Guys, I am trying to run the following very simple program on my machine to parse a very simple XML file. It just returns Document object NULL. Same code is working fine on another machine. Note: there is no silly mistake. i have valid xml file at

  • Loadjava puts the whole program on one line

    Hi, I have used the loadjava facility standalone and within Oracle9i jDeveloper and found that when I upload the java source, it puts the whole program on one line. Also if I have left blank lines in the source code, they appear as 'null' in the stor

  • IPhone4 Sync to Outlook 2010 not working

    Anyone else having problems sync'ing the iPhone4 to Outlook 2010 Contacts? Worked fine with the 3GS, somehow it refuses to work with the iPhone4, none transfered. Tried http://support.apple.com/kb/ht1692 to no avail. Getting desperate now. I have zil

  • Minor flaw in brand new MacBook keyboard area

    The surface material surrounding the keyboard (the area on which you place your hands) has a minor flaw on the left side near the bottom of the screen. It is slightly separated from the body. Can this be repaired/glued at an Apple store? I'd hate to

  • Entry Lock Problem on the XI Server

    Hi, Getting this error in the XI system. The error below is for the file adapter. Getting similar error for the JDBC as well. Transmitting the message to endpoint http://<SERVER>:<PORT>/sap/xi/engine?type=entry using connection File_http://sap.com/xi