IE 11 plays pin animation a little longer. Result is crappy

Hello. I'm a newbie with Edge Animate but having an experience with Flash animation its not a big deal to understand friendly interface of Edge.
Small clip i'm making now have a "counter" with the digits rolling animation. This animation made with vertical text block that scrolling down in the masked area.
Everything works fine, digits stop in the right place.
But not in IE. Looks like IE scrolls the digits a little further and the results looks bad.
You can see it here:
http://pashdesigner.ru/11/Untitled-1.html
What can I do to prevent this? I've tried a "stop" command after animation but it wont help.
Thanks!

I have a nearly identical problem. I can import part of the first track, and for some reason, part of the 6th track and then skips over the rest. It shows the play times as a huge number (somewhere around 667 hours) but imports nothing. I cannot play the CD with iTunes either.
I bought vista home premium and was disappointed to discover it does not come with a x64 bit disk. I used vista 32 bit software and had absolutely no problems with iTunes. After a fresh install of vista for 64 bit iTunes no longer works properly. I can still play anything I transferred from my backup HD but no importing is possible.
I have tried the error correction with no success. I tried installing and running 32 bit iTunes and it gives me an error saying something to the effect of "iTunes is improperly installed. You may need to reinstall iTunes to fix this problem."
I have a hard time believing that this is due to a x64 bit problem as Apple has used this technology longer than most. Is this an issue with the latest iTunes? I am going to fuss with it some more but I'm very frustrated that I can bearly use the new iPod I bought. Any suggestions from Apple users as well as Dark Side (*vista or windows in general :)*) users would be awesome.

Similar Messages

  • EXPERT NEEDED!! Songs that once played on iTunes & iPod no longer will.

    I've got a 20 Gig iPod (clickwheel black and white). I have a mixture of ripped CD's, songs I've downloaded from iTunes, and songs that are on my iPod for an account my iTunes is an authorized user for.
    Songs that have played just fine for a long time are now showing up with an "!" mark next to them in iTunes. And when I choose them on the iPod, it just skips to the next song. Oddly enough, I've even got some complete CDs that I've ripped, d/l'd, etc., and one or two songs will play, but the rest show up with the "!"
    The songs are still present on the iPod (they show up in iTunes, plus they're still consuming the space on my iPod). And my iPod will show the songs in the menu and the time of the track, but it just won't play them when I choose them. I've also tried to rip them off of my iPod with iDump -- no luck there either.
    I'm at a loss. I'm so desparate for a solution, I'd be happy to send the person that first tells me how to fix the problem a $20 bill (or a check -- probably a little safer in the mail). No kidding.
    HP Pavillion   Windows XP  

    It's an iPod problem, since the songs are actually stored on my iPod. When I go to play my iPod (not my iTunes library), the iPod nor iTunes (playing the songs on my iPod) will play these certain songs. I haven't removed the songs from my iPod -- they still show up on my iPod. They just won't play.

  • Is it possible to play an animation by clicking and dragging?

    I currently have right and left arrow buttons to control an animation.
    I was wondering if it's possible to control the animation by dragging the mouse? So if the user clicked and dragged the mouse to the left it would play the animation, then when they released the click it would stop. And if they dragged to the right it would play in reverse.
    I've been looking around and haven't found anything on this topic. Any help would be appreciated.

    Hi, cameronnicol-
    The code should work on the Stage, as it's internally just a symbol.  You should ensure that you reference the object as Stage in your code and not stage (note the capitalization).  The other thing to consider is that click and drag events are not very performant on devices; touch events generally register very quickly and will give your users a better experience.
    -Elaine

  • How can I get dock connector to turn off on air play. There is no longer a choice for sound to be displayed on iPad. I do not own outside speakers. Have already reset. Thanks

    How can I get dock connector to turn off on air play. There is no longer a choice for sound to be displayed on iPad. I do not own outside speakers. Have already reset. Thanks

    Slow, intermittent.  Sometimes bootable sometime not. Odd behavior.
    Sounds to me like a classic case of your HD failing.
    Your SMART status may still show verified, with no errors on the Apple Hardware Test, Disk Utility shows no problems on Disk Repair-  this is of no help.
    I trust you have a good back-up and a bootable clone.
    http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

  • Playing simultaneous animations when clicking on a button

    Hello,
    Does anyone knows how to make two animations on the timeline in edge animate play simultaneously when i click on a button ?
    I have a button in my menu, when i click on it i need to play to animations from the timeline.
    Thanks for helping me.

    hey Vincent,
    Try adding the animation to a symbols and playing the symbols. When you make these symbols have auto play un-ticked as the animation will play automatically  from the start of the main timeline otherwise. Then on your button you can access the symbols by add code:
    sym.getSymbol("symbolname1").play();
    sym.getSymbol("symbolname2").play();
    If you don't want to put the code in yourself use the auto coder and you go playback/play/stage/symbolname1
    The play works the same as if it was on the main timeline so you can play from a label, time on the timeline or just leave play() to play from the beginning of the symbol.
    Hope this helps

  • How can I combine multiple animations. (Play another animation after one has finished with a click?)

    How can I combine multiple animations. (Play another animation after one has finished with a click?) Like a slideshow but with animations. any ideas?

    You can do this by calling up the different edge Animate composition html pages using buttons and an iframe:
    To get a general idea, put this in the body of an html page and insert your own URLs where indicated
    <iframe id="iframeID" src="yourFirstURL" width="640" height="480">
    <p>Your browser does not support iframes.</p>
    </iframe>
    <button onclick='loadIframe("iframeID", "firstAnimURL")'>First Animation</button>
    <button onclick='loadIframe("iframeID", "secondAnimURL")'>Second Animation</button>
    <button onclick='loadIframe("iframeID", "thirdAnimURL")'>Third Animation</button>
    <script>
    function loadIframe(iframeID,url) {
    //alert("Hello");
       document.getElementById("iframeID").src = url;
    </script>
    Peter Small

  • I am developing a site where the content is 1300 pixels in depth but the browser background is 2500 pixels in depth. I want the browser background to be just a little longer than the content, but cannot seem to make that happen. Does anyone have an idea

    I am developing an iWEB site where the content is 1300 pixels in depth but the browser background is 2500 pixels in depth. I want the browser background to be just a little longer than the content, say about 1340 pixels, but cannot seem to shorten the browser measurements. Does anyone have an idea how I can solve this problem?   I have tried to make height adjustments in the Page Layout section of the Inspector, but content height heading has no affect on anything.  I have built about 75 sites in iWEB and this is my first experience like this.

    That is a legitimate Mozilla newsletter. As it says in the email:
    You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
    Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
    Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ "

  • Play/Pause animation on cursor rollover!

    Hi,
    I have a sequence of images that make up an animation.
    I want it so...
         - when the file initially opens, the first frame is showed
         - when the cursor rolls over the frame, the animation plays
         - the animation keeps playing until the cursor is taken off the frame, at which point it is paused.
    My animation has sound.
    No buttons, just plain and simple cursor roll over.
    Thank you for any help you guys can give me!
    Sam

    Thank you so much for your help Ned!
    But I'm still having problems....It's made no difference what so ever and I've done exactly what you've said.
    I've got some pictures here to help.
    Below is shot of my timeline as I see it...
    This is also the code I have inserted on the first frame of the "Actions layer"....
    These are some errors with the code (not sure if this is relevant)....
    Any more ideas Ned?

  • How can I play an animation in reverse only if the symbol that contains the animation is visible? if the symbol is not visible have the trigger no longer target that symbol?

    Hi
    I have a button the does two functions at the same time. it plays a symbol's animation in reverse (in order to hide it) and it slides an element. the symbols animation is triggered by another button (which is not relevant) . So my problem is that if the animation has been triggered first than when the button is pushed the animation plays in reverse, the symbol hides and everything is fine, but if a push the button before that the animation will flash in reverse. SO how can I tell it to only play in reverse when the symbol's animation has run. I know it's an if / else statement but i have no idea how to do it.
    thx

    Here is a case close to your issue:
    if ( sym.getSymbol("Symbol1").$("Text").is(":visible") ) { sym.getSymbol("Symbol1").playReverse(); }
    else { sym.getSymbol("Symbol1").play(); }
    Demo files ==> isVisible.zip - Box

  • Leopard Behavior w/Graphics (a little long)

    I switched to Leopard from Tiger the day after release. I found the computer slows down over the course of operation during the day, especially graphics performance, including genie effects, dock, etc..as many have written. I ran Cinebench 10 tests on the computer before and after optimizing the system with Onyx Beta 1.8.4b.(I used this as a last resort after running Cinebench and noticed performance was less than HALF of Tiger) The performance of Cinebench after optimization and cache cleaning was over double on the OpenGL tests (almost a 10% improvement from Tiger). Before Optimization-BAD, AFter Optimization-GOOD. If I continued to run Cinebench 9.5 first and version 10 tests second....the Cinebench 10 results were back to less than half. (visual performance on screen was terrible, OPEN GL animation tests were dismal, not renderering tests, which "only" slowed by 20%)
    Now, this tells a layman that something is going on with the allocation of graphic memory, perhaps filling up somewhere since the Activity Monitor in OSX shows plenty of system memory to be free. I also loaded in my desktop picture from my Tiger days; of a JPEG I took this summer and it slowed down the computer considerably on the tests. After I changed desktops, I cleaned the cache in Onyx. Still slow performance. I then "Optimized" with Onyx- back to good performance.
    Something is going on with Leopard and the graphics memory allocation. Or perhaps it is the program not behaving well with Leopard. Aperture was running great with Tiger, now it has on days and off days. Spotlight indexing could be a factor and I configured Time Machine to do manual backups...the regular back ups are frustrating if working with memory intensive applications.......but since I have not added many files since loading Leopard, indexing should hardly be a factor.
    Has anyone tried running graphics tests or graphics intensive apps and noticed any misbehavior (for lack of better word) with Leopard? What does Onyx do that restores the performance of my machine with the "Optimization" option. Since it takes awhile to perform, it is a very inconvenient way to continually keep my system running well.
    As a footnote: I have done the clear VRAM thing (with the option/command/p/r keys pressed at bootup) and the shift/safe mode boot up to restore performance. The safe mode boot up worked to restore performance after rebooting normally, this takes quite a long time. The vram dump thing did not restore performance in the OpenGL tests.
    Any comments or thoughts?

    Thanks for the helpful reply, Kenneth! I'll definitely look into the Speck case, whichever way I go.
    "Some display issues have to do with the display and not the backlight, so don't expect 100% happiness. Ever."
    Agreed. I've seen some really bad MBP's and I was hoping that they've gotten better. I've actually read a lot of threads here about how the Macbook's screen is generally better quality (at least before the update).
    "There is never enough monitor. If that is a serious concern, you should get a large external monitor. 15 is just not that much bigger than 13. 23 is big!"
    I totally agree. However, regarding my current situation of leaving the country and not having access to an external monitor, I think I might be better off having 15" to play with abroad.
    "Beauty is not everything. If you need a separate graphics card, an expresscard slot, 4GB RAM, or FW800, get the MBP. Also, it will be faster GHz for GHz because of the cache, among other things."
    Sometimes I wonder if I have OCD with keeping nice things clean...which is why I think that white might not be the best choice for me. I noticed that you have a Macbook Pro yourself. Do you feel like it's hard to keep clean, or that you have to treat it gently?
    About the extra options that you mention, I'll be honest: I don't have a specific need for them. I'd like to get a FW enclosure for my external drive, but I don't currently own one. I'd also like to have a graphics card, though I don't really play computer games. I wouldn't like to rule it out for the future though...I'm going to have a lot of free time in Costa Rica. Also, the 4GB of RAM will likely be more important moving forward. I'm planning on keeping my next computer for the next 2-3 years, so I just want to make sure that I have few things to regret.
    " In 2 or 3 years you can buy the MBP Extreem with a 10GHz processor, 2 TB HD, and direct output to your optic nerves for the same price, and already have the big monitor!"
    Hilarious. Thanks for that.
    -G

  • On preview or publish captivate 4 plays all animations

    Hello,
    I have a weird problem.  I have two slides that previously ran well on preview and publish.  First, I tried importing them into my presentationg, but captivate went crazy with them...it seemed to try to play all of my text animations at once, made weird clicking sounds, the tool bar moved to the top of the screen and the whole thing just flashed.  So, I deleted the two imported slides and the presentation went fine.  I found a posting here that suggested copying the slides instead of importing, so i tried that.  No luck.  So I rebuilt the two slides and tried  again.  No luck.  I can get the two slides to run fine when by themselves, but when I either put them into my main project or vice versa, it goes wacky.  After such attempts, I have to rebuild the slides, because they no longer work by themselves.  I have checked every setting I can think of to make sure they match in both files (I start with a template, so they SHOULD match).
    I have adequate RAM and other such things on my computer.  I run windows 7 and have updated captivate.
    Thank you anyone for your help.
    Teresa

    I had the same problem, where graphics (images) placed on a page are simply NOT WYSIWYG. That said, it turns out the internal mechanisms of MUSE do track the position of things, and so, by, for example, placing an image ON TOP OF TEXT can solve its location issue. You simply adjust based on reviewing the HTML/CSS. It's a bit hit and miss. The resultant HTML and CSS will place the image correctly, even though it looks awful onscreen. This problem seems to occur in longer length (scroll down) type pages.
    Now THAT said, another problem: MUSE does not UPLOAD ALL, but always uploads only new files. Problems on web review of a site disappear (and this of course, could involve the server used) disappear, for the most part, when you manually delete BOTH the HTML and CSS of the particular page FIRST, then MANUALLY, through a third party FTP program, upload the good HTML and CSS. This assumes you have already uploaded the required media.

  • Play exit animations on multiple external SWF's?

    Hi,
    Here is what I would like to do: I have some buttons, then 2
    movie clips named container and container2. When I click on a
    button, an external SWF is loaded into container. I have it working
    so that when another button is clicked, it plays the exit animation
    of the current SWF, then loads the new one. Here is the code that I
    used for that:
    on a button:
    Code:
    on (release) {
    if (_root.currMovie == undefined) {
    _root.currMovie = "who";
    container.loadMovie("who.swf");
    } else if (_root.currMovie != "who") {
    if (container._currentframe >= container.midframe) {
    _root.currMovie = "who";
    container.play();
    In who.swf frame 1:
    Code:
    midframe = 114;
    In who.swf last frame:
    Code:
    _root.currMovie = undefined;
    stop();
    Frame 114 is where the exit animation starts.
    What I would like to do, is have a button in who.swf, that
    will load another external swf into container2, while leaving
    who.swf in place. Then, when one of the main buttons is clicked, I
    would like it to play the exit animation of the swf that is
    currently in container2, then play the exit animation of the swf
    that is currently in container, then load the new swf into
    container. Can someone please help me out with the code for that?
    Thanks!

    the thing is that i had to keep a reference to my Loader.
    if you dont keep a reference to the Loader who is processing the loadBytes(), the Garbage Collector could close the Loader, wich causes the loader to unload.
    i tried this with a test, i load 1 swf binary with an urlloader, and in the complete-event i create 100 loaders wich do a loadBytes on the loaded bytes.
    the FlashBuilder console traces 100x [SWF] <path> 1000 bytes after decompression, and sometimes i get a whole bunch of [Unload SWF]
    this is because i dont keep any reference to the Loader. if i would keep a reference to the loader stored in an array, i dont get the unload. when the loader is done, you can store the content in a variable, and remove the loader, but as long as its loading, you should keep a reference to the loader.
    Hope this helps others.
    p.s.  i keep seeing [SWF] Main.swf instead of [SWF] <loaded swf file> is because i load the swf with an URLLoader (wich gives no trace), but when i do a loadBytes, it doesnt know its path anymore, so you get the root-swf, Main.swf in this case.

  • Animation Stops in Long SWFs

    I have a couple presentations that I'm trying to create using
    a single projector/EXE, that include both sound and animation. They
    are pretty long in terms of how many frames they (current one is
    16K frames +) and the problem I'm running into is that the
    animation keeps freezing towards the end of the presentation. The
    audio continues to play, but the animation freezes.
    I've tried everything I can think of, but can't figure out a
    solution other than splitting the project into multiple SWFs and
    loading them (loadMovie) externally. Ideally, I'd like the project
    to be just a single file, but this is the only way I can find to
    get it to work.
    Is there an issue with Flash not playing past a certain
    number of frames?
    Anyone else run into this? Any help/suggestions would be
    greatly appreciated!
    Thanks,
    Mike

    well you answered yourself - 16,000 frames has always been
    documented as the limit for flash
    (frames, levels, loaded movies).
    You will have to re-think your timeline - nobody ever reaches
    this length (it's very rare) because
    flash was never designed for such long running SWF movies
    unless you break it down into several
    smaller SWfs and loaded them dynamically (daisy-chain them).
    --> **Adobe Certified Expert**
    --> www.mudbubble.com
    --> www.keyframer.com
    ekim2005 wrote:
    > I have a couple presentations that I'm trying to create
    using a single
    > projector/EXE, that include both sound and animation.
    They are pretty long in
    > terms of how many frames they (current one is 16K frames
    +) and the problem I'm
    > running into is that the animation keeps freezing
    towards the end of the
    > presentation. The audio continues to play, but the
    animation freezes.
    >
    > I've tried everything I can think of, but can't figure
    out a solution other
    > than splitting the project into multiple SWFs and
    loading them (loadMovie)
    > externally. Ideally, I'd like the project to be just a
    single file, but this is
    > the only way I can find to get it to work.
    >
    > Is there an issue with Flash not playing past a certain
    number of frames?
    >
    > Anyone else run into this? Any help/suggestions would be
    greatly appreciated!
    >
    > Thanks,
    > Mike
    >

  • My iTunes and iTunes Store will NOT play on my computer any longer

    For some reason none of the songs in my iTunes library or the iTunes store will no longer play on my computer. I can double click the song and it appears in the little box at the top of the screen but it WILL NOT play. Very frustrating. Is there some setting that got changed some how that I can not find??

    Welcome to AD!
    Have you seen this article and done any of its steps?
    http://support.apple.com/kb/TS1362

  • Importing .GIF into Fc will not play the animated gif in output

    I imported a animated .gif  (attached video.gif) into Fc (of a sequence of pics I took saved as an animated .gif)
    It inported as a "bitmap image" and upon export to swf it did NOT show the .gif as an animated .gif but just shows the first frame..
    (It did not put this file into an assests folder...)
    So I converted the "bitmap image" into an optimaized graphic...and NOW it DOES put the original animated gif into the "assets" folder with a Graphic1.fxg and video.gif in that folder.. and If I open the gif in the assest folder it plays it as the animated .gif it is..
    BUT SADLY upon export to SWF it still DOES not play the gif as an animated gif.. just the first frame...
    Can I do anything in the code to tell the swf file that is exported to play the gif in the assest folder as an animated gif not just show the frame?
    I did the animated gif approach becasue I setup a photoshop cs4 file with a quicktime video as a layer and Fc only brought in the first frame of the quicktime layer..
    Could the next beta of Fc include the ability to import and play animated gifs as artwork as well AND/or to import Ps Cs4 video layers as videos
    So I would have to created a video page in flash pro and import that as a object? into a state?
    (no experience with flash pro but just bought cs4 and will try to learn FlashPro overweekend)

    Interesting. I don't think this is somethign you can do in Flash Catalyst. We have .GIF support in the Flash Player but I don't think you can use a GIF asset inside Catalyst. If you need that GIF to play you'll have to embed it using Flash Builder.
    But Flash Catalyst will support video version 1.0. I don't think you can turn arbitrary layers into "video" layers but you can bring in video files (like .FLV) and then attach components to behaviors (like play, stop, etc).
    =Ryan
    [email protected]

Maybe you are looking for