IE 9.0 proxy failover not working correctly - Is there a bug fix or IE setting to correct this behavior

I am testing proxy pac file  failover using IE 9.0.8112 and testing three choices using an automatic configuration file.  I shut down the first proxy to test the fail over to the second. Firefox 20.0.1 and chrome work correctly, but IE 9.0 does
not. My snip-it is as follows:
return "PROXY 192.168.11.12:8080; PROXY 192.168.11.195:8080; DIRECT";
With ie8, firefox and chrome the fail over to the next proxy entry during a PROXY 192.168.11.12 fail over works correct and as follows:
Proxy 192.168.11.12 times out after about 25-30 seconds and then proxy 192.168.11.195 is attempted and the web page is displayed.
Then all url lookups after this time are made through proxy 192.168.11.195 and are quick. This is how proxy fail over should work.
When I test with ie9 it works as follows:
Proxy 192.168.11.12 times out after about 25-30 seconds and then proxy 192.168.11.195 is attempted and the web page is displayed.
Then all following url lookups take 30 -45 seconds because it always tries the first PROXY 192.168.11.12 first before attempting proxy 192.168.11.195
because it does not remember first Proxy 192.168.11.12 is not available.
Is there a setting or bug opened on this behavior????

Not to be pedantic, but the proxy.pac file is JavaScript... :)
You might be experiencing an issue with IE's automatic proxy caching, described here: http://support.microsoft.com/kb/271361 . Basically, the choice of which proxy to use is decided once per requested host, and the decision is cached. So, if you
are testing failover by accessing resources on the same host before and after shutting off the first proxy, IE will still insist on using that proxy address for subsequent requests. If you test a second host and get a more timely response, then I would say
this is what you are seeing.
You can experimentally disable this feature by setting...
[HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings]
"EnableAutoProxyResultCache"=dword:00000000"
...in the registry for your test user. I imagine a reboot will be required.

Similar Messages

  • Failover not working correctly on "redundancy-phy" (box to box style)

    Hi,
    I've got 2 CSS 11506 boxes configured using box to box failover.   Failing the master CSS box itself (powering down) causes the backup CSS to become master and all is well.
    However when the switch, which the CSS is connected to, fails the CSS didn't fail over so I added the redundancy-phy to both the interfaces connected to the switch and failed the switch again.  At this point a "show redundancy" shows the master becoming backup but between 3 and 5 seconds later it re-assumes master status and keeps flipping every  60 - 90 seconds
    I also tried a service with a type of redundancy-up and again the same symptoms - fails over but assumes master again within 3--5 seconds.
    Any help gratefully received!
    Cheers

    box-to-box is the least interesting redundancy mechanism.
    I definitely prefer vip/interface redundancy.
    More complex to configure but better control.
    Regarding your problem, is the switch connected to both CSS ?  Do you have a direct link between the CSS for the redundancy protocol ? What version do you run ?
    Gilles

  • On my Iphone 3 that I just got, the letters I, K, N do not work. Is there an easy fix or do I need to take it to the store for a replacement.

    What can I do to fix the phone and get the keys I, K, N to work? Do I have to take it back?

    Hi necjd123,
    If your iPhone's touchscreen is not responding, then I'd like you to please follow the troubleshooting steps below.
    Make sure your hands are clean and dry, then try these steps:
    If you have a case or screen protector on your device, try removing it.
    Clean the screen with a soft, slightly damp, lint-free cloth.
    Unplug your device.
    Restart your device. If you can't restart, reset your device.
    If your touchscreen still doesn't respond like it should, contact Apple Support or take your device to an Apple Retail Store or Apple Authorized Service Provider.
    If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
    Take care,
    Alex H.

  • Hot corners do not work. Is there a plist that can be deleted to rectify this?

    Is there a plist that can be deleted for hot corners?  I cannot get them to work at all.  Thanks for any help.

    "The easiest way to get the hot corners temporarily working again is to launch the Terminal.app and type "killall Dock" in." quoting Michaël Betsch
    I tried this but it still doesnt work. Just to clarify, i'm using a MacBook Pro MAC OS X v10.7.2 Lion.
    I even tried changing the hot corners and changing it back. But all the 4 corners still doesn work.
    I encounted this several times already. I tried rebooting my mac and it worked after startup.
    Is there a better solution to it besides rebooting my laptop?

  • Interactive buttons not working on interactive pdf when the Indesign links are set correctly

    Hi all,
    I have one Indesign CS6 manual containing 17 files, 126 pages. This has been set to a book file.
    This has been translated into 14 languages and now we are having problems creating the interactive pdfs.
    After fixing the broken interactive buttons within the Indd files, we are finding that when we create the interactive pdfs, not all interactive button links work. When we recreate the same langauge interactive pdf we are finding that the buttons that were not working the 1st time, are now working, and some buttons that were working, are now not working.
    Is there a bug somewhere.
    Any idea why the interactive buttons work one minute and then not the next, and vice versa.
    Any idea how we can fix.
    I’m using Indesign CS6 and Acrobat 9 Pro.
    Thanks in advance.

    Hi LoriAUC,
    Thanks for this. Very much appreciated.
    I have asked sagar-khanna from the other discussion is he knows more about the broken links etc.
    Thanks again.
    Julie :-)

  • Type-mapping not working correctly, get "Unable to find a javaType for the xmlType" WARNING

    I'm manually creating a web-services.xml file, and using the autogen ant task to
    generate the codec XML/Java classes. The XML definition is provided by SAP.
    The ant build.xml file:
    <project name="buildWebservice" default="stubgen">
    <target name="stubgen">
    <clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
    packageName="com.aa.rmis.webservice.client"
    clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
    autotype="False" />
    </target>
    <target name="all" depends="stubgen"/>
    </project>
    The problem is seen below in the output from Ant. Note the WARNINIG. The problem
    is that the xml type cannot be mapped to the Java type.
    C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
    Buildfile: clientbuild.xml
    stubgen:
    [clientgen] Generating client jar for RMIS.ear ...
    [clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
    cument:sap:business']:PaymentRequest.Create. Make sure that you have registered
    this xml type in the type mapping
    [clientgen] Using SOAPElement instead
    [clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
    client.jar-836624340
    [clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
    BUILD SUCCESSFUL
    Total time: 17 seconds
    The Java source that has the implementation of the service methods is simply:
    package com.aa.rmis.webservice;
    import com.aa.rmis.ifr.request.*;
    public class TestService
    public TestService()
    public int serviceRequest(PaymentRequestCreate request)
    System.out.println("Received serviceRequest message");
    return 0;
    public void testStringRequest(String request)
    The web-service.xml file is attached, which contains the schema for the SAP PaymentRequest.Create
    object definition.
    Another problem I have, which is probably related, is that the service method
    that has a complex data type (non-built in data type) is not being deployed into
    the WebLogic server. But the other service method that simply takes a String
    parameter is.
    The steps I took are:
    1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
    2. Use ant task autogen to generate the request codec classes
    3. Create the web-services.xml file by inserting the schema definition and the
    mapping file created by the autogen task, and defining the operations
    4. Build web-services.war file that contains all autogen compiled class files,
    the web-services.xml file, and the service implementation class
    5. Build the ear file that holds the web service files
    6. Use the clientgen ant task to generate (included above) to generate the client
    jar file that should contain the proxy for both of the service methods
    Environment:
    * WebLogic 7.02
    * JDK 1.3.1_06
    * JBuilder 9 Enterprise
    * Ant 1.4
    Possible causes:
    * Namespace not being used correctly
    * copied verbatim the mapping xml file generated by autogen into the web-services.xml
    file
    * xml-schema part of web-services.xml might not be set correctly
    * operation definition might not be using the correct namespace
    * Classpath used for ant might not be right
    * Doubt this is the problem, but I'm out of other ideas
    * Set by using the setWLEnv.cmd file provided by WebLogic
    * Tried adding the generated classes directory for my project to the classpath,
    but did not work
    I've been referencing the Programming WebLogic Web Services document throughout
    this entire process. I must be missing something.
    Can anybody from BEA help me out with this problem?
    Thanks in advance.
    [web-services.xml]

    Hi JD,
    I spent a few cycles looking over your web-services.xml file, however I
    don't have any suggestions other that one that looks like you have
    already tried, at the top, in the <schema...>
    targetNamespace="urn:sap-com:document:sap:business"
    Making edits to these generated files can be tricky and my only
    suggestion is to create a small reproducer to run by our outstanding
    support team.
    A quick look at our problem database shows one issue (CR095109) related
    to a similar problem at deploy time that was fixed with 7.0SP3. Again,
    the support folks will be able to help focus in on the issue.
    Regards,
    Bruce
    JD wrote:
    >
    The first posting contains the wrong web-services.xml file. Please refer to this
    one instead.
    "JD" <[email protected]> wrote:
    I'm manually creating a web-services.xml file, and using the autogen
    ant task to
    generate the codec XML/Java classes. The XML definition is provided
    by SAP.
    The ant build.xml file:
    <project name="buildWebservice" default="stubgen">
    <target name="stubgen">
    <clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
    packageName="com.aa.rmis.webservice.client"
    clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
    autotype="False" />
    </target>
    <target name="all" depends="stubgen"/>
    </project>
    The problem is seen below in the output from Ant. Note the WARNINIG.
    The problem
    is that the xml type cannot be mapped to the Java type.
    C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
    Buildfile: clientbuild.xml
    stubgen:
    [clientgen] Generating client jar for RMIS.ear ...
    [clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
    cument:sap:business']:PaymentRequest.Create. Make sure that you have
    registered
    this xml type in the type mapping
    [clientgen] Using SOAPElement instead
    [clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
    client.jar-836624340
    [clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
    BUILD SUCCESSFUL
    Total time: 17 seconds
    The Java source that has the implementation of the service methods is
    simply:
    package com.aa.rmis.webservice;
    import com.aa.rmis.ifr.request.*;
    public class TestService
    public TestService()
    public int serviceRequest(PaymentRequestCreate request)
    System.out.println("Received serviceRequest message");
    return 0;
    public void testStringRequest(String request)
    The web-service.xml file is attached, which contains the schema for the
    SAP PaymentRequest.Create
    object definition.
    Another problem I have, which is probably related, is that the service
    method
    that has a complex data type (non-built in data type) is not being deployed
    into
    the WebLogic server. But the other service method that simply takes
    a String
    parameter is.
    The steps I took are:
    1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
    2. Use ant task autogen to generate the request codec classes
    3. Create the web-services.xml file by inserting the schema definition
    and the
    mapping file created by the autogen task, and defining the operations
    4. Build web-services.war file that contains all autogen compiled class
    files,
    the web-services.xml file, and the service implementation class
    5. Build the ear file that holds the web service files
    6. Use the clientgen ant task to generate (included above) to generate
    the client
    jar file that should contain the proxy for both of the service methods
    Environment:
    * WebLogic 7.02
    * JDK 1.3.1_06
    * JBuilder 9 Enterprise
    * Ant 1.4
    Possible causes:
    * Namespace not being used correctly
    * copied verbatim the mapping xml file generated by autogen into
    the web-services.xml
    file
    * xml-schema part of web-services.xml might not be set correctly
    * operation definition might not be using the correct namespace
    * Classpath used for ant might not be right
    * Doubt this is the problem, but I'm out of other ideas
    * Set by using the setWLEnv.cmd file provided by WebLogic
    * Tried adding the generated classes directory for my project to
    the classpath,
    but did not work
    I've been referencing the Programming WebLogic Web Services document
    throughout
    this entire process. I must be missing something.
    Can anybody from BEA help me out with this problem?
    Thanks in advance.
    Name: web-services.xml
    web-services.xml Type: ACT Project (text/xml)
    Encoding: base64

  • Exchange 2013 - 2007 coexistence - activesync 2007 does not work correctly

    Exchange 2013 SP1.  On going Saga-  Last night we cut over to full co-existence with DNS changes for use of legacy namespace and had to roll back again. We had only two issues but one was considered a show stopper.
    The main issue was that Active Sync would not work correctly for 2007 users. It failed the exchange connectivity test and would only work on a device if the domain was entered - or if the legacy namespace was entered manually. That would have meant
    chaos for several thousand users so we rolled back. (It worked perfectly for 2013 users).
    The error given by the test was "foldersync failed" when I drilled down into the detail. It found autodiscover but failed after the initial handshake. (All other tests passed for 2007 and 2013 users)
    We tried:
    1. Populating both Autodisover internal and external urls with the legacy namespace
    2. Populating only the internal url and leaving the external blank (both 1 and 2 had the same result)
    3. Leaving both URLs blank to force 2013 to proxy to the 2007 cas (totally broke it- would not resolve at all)
    I don't know if this is related but SSO is failing for 2007 OWA - two prompts.
    Environment notes- all internal co-existence is working and the internal LTM F5's are working. Externally we use 2 GTM F5 to the LTM f5's to Ex2013. 2007 has SSL being passed through all the way to the CAS. Servers are split into CAS and MBX over 2 DC's.
    Everything else externally was working when we cut over.
    any and all help appreciated
    Tony

    Hi,
    Glad to know that you have found the solution.
    Thanks for your generous sharing.
    Have a nice day : )
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Sorting not working correctly for date field in alv report

    Hi All,
    My report displays many rows also containing date type fields of bldat,budat .
    When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
    Ex:
    Invoice doc dat
    01-25-2011
    01-21-2011
    02-02-2011
    10-25-2010
    11-20-2010
    If I use ascending then it is sorted as :
    Invoice doc dat
    01-21-2011
    01-25-2011
    02-02-2011
    10-20-2010
    10-25-2010
    Why the sorting is not working correct for year.(2010 records should have been first).
    The field wa_tab-bldat is of type char10.
    It is populated as wa_tab-bldat = bsak-bldat.
    Kindly suggest what can be done.

    The field wa_tab-bldat is of type char10
    Then what it does is correct.
    Refer to type datum...it will work

  • If statement within a view is not working correctly ?

    Hi all,
    maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
    I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
    <%@page language="abap"%>
    <%@extension name="htmlb" prefix="htmlb"%>
    <% if not isframe is initial. %>
      <htmlb:content design="design2003">
         <htmlb:page title = "Top Level Navigation view">
    <% endif. %>
    hallo world
    <% if not isframe is initial. %>
         </htmlb:page>
      </htmlb:content>
    <% endif. %>
    thanks in advance and best regards
    Matthias Hlubek

    Matthias,
    The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
    <%@page language="abap"%>
    <%@extension name="htmlb" prefix="htmlb"%>
    <% if isframe is <b>NOT</b> initial. %>
    <htmlb:content design="design2003">
      <htmlb:page title = "Top Level Navigation view">
        hallo world
      </htmlb:page>
    </htmlb:content>
    <% else. %>
      hallo world
    <% endif. %>
    So why does your example not work? Let us start with a simple tag:
      <htmlb:page title = "Top Level Navigation view">
      </htmlb:page>
    Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
      DATA: tag TYPE REF TO cl_htmlb_page.
      CREATE OBJECT tag.
      tag->title = 'Top Level Navigation view'.
      IF tag->DO_AT_BEGINNING( ) = CONTINUE.
      ENDIF.
      tag->DO_AT_END( ).
    You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
    <% if isframe is NOT initial. %>
      <htmlb:page title = "Top Level Navigation view">
    <% endif. %>
    <% if isframe is NOT initial. %>
      </htmlb:page>
    <% endif. %>
    And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
    if isframe is NOT initial.
      DATA: tag TYPE REF TO cl_htmlb_page.
      CREATE OBJECT tag.
      tag->title = 'Top Level Navigation view'.
      IF tag->DO_AT_BEGINNING( ) = CONTINUE.
    endif.
    if isframe is NOT initial.
      ENDIF.
      tag->DO_AT_END( ).
    endif.
    You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
    The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
    brian

  • ** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

    Hi Friends,
    We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY. 
    We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
    lw_fieldcat-lzero = space.
    lw_fieldcat-no_zero = 'X'.
    After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
    1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
    Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
    Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
    Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
    2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
    We are using SAP ECC 6.0.
    Friends, can you clarify the about doubts. It is surprising for me.
    Kind regards,
    Jegathees P.
    Our customer is asked to remove the leading zeros for the numeric field

    Hi Clemens Li
    I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
    Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
    Hi Abhii
    I have given below the fieldcat coding.
    Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
        wls_fieldcat-col_pos   = wpv_pos.
        wls_fieldcat-fieldname = wpv_champ.
        wls_fieldcat-tabname   = wlc_tabname.
      wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
        wls_fieldcat-seltext_l = wpv_libelle.
        wls_fieldcat-ddictxt   = 'L'.
        wls_fieldcat-no_out    = wv_no_out.
        APPEND wls_fieldcat TO gt_fieldcat.
    Kind regards,
    Jegathees P.

  • Key Figure calculation in Abap is not working correctly - Overlooping

    Hi,
    I wrote a logic to calculate the ratio of key figure but it is not working correctly
    For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
    So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
    Sample
    A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
    PRODUCT1 0.3 = 1000 * 0.3 = 300
    PRODUCT2 0.2 = 1000 * 0.2 = 200
    PRODUCT3 0.7 = 1000 * 0.7 = 700
    The total amount of this new products is 1000.
    Now my logic is working this way.
    PRODUCT1 0.3 = 1000 * 0.3 = 300
    PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
    PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
    Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
    Logic used
    DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
    DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
    DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
    DATA: amount LIKE data_package-netamount.
    DATA: zidx LIKE sy-tabix.
    REFRESH t_data.
    LOOP AT data_package.
      zidx = sy-tabix.
      MOVE-CORRESPONDING data_package TO t_data.
      REFRESH t_newdso.
      SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
      data_package-prod.
      SORT t_newdso BY prod.
    *LOOP AT T_NEWDSO.
      READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
      IF sy-subrc EQ 0.
        LOOP AT t_newdso.
          t_data-prod = t_newdso-/bic/znew_mp.
          t_data-material = t_newdso-material.
    *T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
          APPEND t_data.
        ENDLOOP.
      ELSE.
        REFRESH t_olddso.
        SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
        data_package-prod.
        SORT t_olddso BY prod.
        READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
        t_data-prod = t_olddso-prod.
        t_data-material = t_olddso-material.
        APPEND t_data.
      ENDIF.
      MODIFY data_package INDEX zidx.
    ENDLOOP.
    REFRESH data_package.
    data_package[] = t_data[].
    thanks
    Edited by: Matt on Sep 27, 2010 2:25 PM - added  tags

    Hi,
    I am not really good at debugging Abap code since I am a newbie. however  I have tried to add CLEAR T_DATA before the first loop.
    REFRESH T_DATA.
    LOOP AT DATA_PACKAGE.
    ZIDX = SY-TABIX.
    MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
    and before the second loop and select statement and at the end of the loop.
    REFRESH T_NEWDSO.
    SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
    DATA_PACKAGE-PROD.
    SORT T_NEWDSO BY PROD.
    READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
    IF sy-subrc EQ 0.
    LOOP AT T_NEWDSO.
    but then not all data are being fetched.
    thanks
    Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

  • Email pushing not working correctly for office email - 3 seperate devices/carriers

    We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
    I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
    I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
    Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
    User 4 is on the older nextel blackberry push to talk, and is not on outlook. 
    We do not have an exchange server. Our emails were all set up through our devices.
    Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
    Thank you in advance for any suggestions.
    Caitlin Talbot 

    Potential solution for windows for a side-by-side install. This works for me.
    To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
    The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
    I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
    + Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
    C:\Program Files\Mozilla Firefox\firefox.exe
    C:\Program Files\Mozilla Firefox 4\firefox.exe
    + Open profile manager. Start > Run : firefox.exe -ProfileManager
    + In profile manager create Two Profiles.
    firefox3.6
    firefox4
    + In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
    + Create two windows shortcuts.
    * General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
    * General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
    That's it. Links from external programs should now open in your default browser.
    Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

  • I bought an IPAD air from state and the screen is not working correctly and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

    i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

    Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
    IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
    Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
    As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
    Egypt authorised service providers : https://locate.apple.com/eg/en/

  • SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer

    I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list.
    I have tested SSRS 2008 R2/SSRS 2012 on Windows 7 64 bit professional.
    It is working correctly in the report manager.
    <Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
            <OverrideNames>
                <Name Language="en-US">TAB delimited</Name>
            </OverrideNames>
            <Configuration>
                <DeviceInfo>
                    <FieldDelimiter xml:space="preserve">&#9;</FieldDelimiter>
                    <Encoding>ASCII</Encoding>
                    <UseFormattedValues>False</UseFormattedValues>
                    <NoHeader>False</NoHeader>
                    <FileExtension>TXT</FileExtension>
                </DeviceInfo>
            </Configuration>
          </Extension>

    Hi Dave0323,
    According to your description, you want to export your report into TXT file and change the delimiter to be a Tab. Right?
    In Reporting Services, when exporting to a CSV file, we can change the default field delimiter to any character that we want, including TAB, by changing the device information settings in the configuration file. For example, to use TAB,
    update the FieldDelimiter setting to <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>. And we can change the FileExtension to be TXT if we want to export it into a TXT file. So in this scenario, we just need to modify the configuration
    file like below:
    The result looks like below:
    Reference:
    CSV Device Information Settings
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Text formatting in Numbers is not working correctly.

    In Numbers on Chrome text formatting is not working correctly, it's almost as if a CSS file is not being loaded. To be precise, when I try to make a cell Bold there is no bolding. I am using Arial as a font. This has been an issue on Mac and Windows. Any ideas?

    Do you have the same problem with Safari or Firefox?

Maybe you are looking for