IE does it 'my way' again...

Hi-
  I'm on DW CS4 here. I added some javascript to my photo gallery to open photos into a new smaller window.
It works fine (can you guess?) in all browsers except IE 6,7 and 8. The window opens but the photo content seems to align to the right rather than be correctly centered like it is on Every Other Browser (Firefox and Safari at least).
Here's the url:
http://www.frankbright.com/index1.htm
I appreciate any pointers - I did go through the trouble to use Divs and to take out the tables on all my photo pages.
Many Thanks, Frank B.

You have a couple errors that I see.
-  It's always a good idea to keep a doctype defined on every page.  There is none defined on the pop-up pages.
-  line 43 - you have the following code <div><a> then on the next line you have a proper <a> link delete that <a> on line 43 because there is no closing tag to match and you cannot have an a tag inside another a tag.
-  In your PhotoBackground.css document, line 17, "a: visited" needs to be re-written as "a:visited" the space will cause errors.
-  For your container move the width before the margin declaration.  Many browsers read things in a top to bottom order, so without a width defined before the margin, the browser can think that the container div has a 100% width (default) and tries to center and then applies the pixel width you have defined after causing different looks in different browsers.
See if that helps.

Similar Messages

  • HT1725 Why does the download start again for the start. I only hve access to a 3G wifi connection so one tv episode had cost me about $10 I'm download costs because of several interruptions.

    Why does the download start again for the start. I only hve access to a 3G wifi connection so one tv episode had cost me about $10 I'm download costs because of several interruptions. Is there a way to change that?

    Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

  • When i turn on my itouch the screen tells me to plug into itunes, i do that and it tells me my ipod is in recovery mode and to restore it, i click ok and click restore then it does it all over again and nothing happens. what do i do?

    when i turn on my itouch the screen tells me to plug into itunes, i do that and it tells me my ipod is in recovery mode and to restore it, i click ok and click restore then it does it all over again and nothing happens. what do i do?

    Hi tgoit2015,
    If you are having issues restoring your iPhone, you may find the following article helpful:
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • When i turn on my computer it freezes in the white screen and the spinning wheel and it won't move from there ... I have turned it off and on several times and took out the battery and it keeps on doing the same thing again what can i do ???

    when i turn on my computer it freezes in the white screen and the spinning wheel and it won't move from there ... I have turned it off and on several times and took out the battery and it keeps on doing the same thing again what can i do ??? please i need help with this and how can i fix it

    Here is some pertinent information and how-to's from Apple:
    http://support.apple.com/kb/TS2570
    Post back if these troubleshooting steps do not work.

  • How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?

    How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?

    skjeggi
    What is this HDR-HS7E - a miniDV camcorder that lets you do DV and HDV capture firewire?
    True, the DV and HDV capture firewire into the Premiere Elements 13 Capture window is gone. But, have you
    looked at the workaround suggested by PRE_help in this forum. The workaround is found in the following
    Adobe document....
    http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
    When your schedule permits, please let us know if that worked for you.
    Thank you.
    ATR

  • Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It ca

    Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It can not be stored because the nam is invalid" With 2. trial it tells me that the data is blocked and I don't have the rights - and I should chenge them. But I am working as the Admin on my PC - and each trial to change the rights of the data is as well not possible because of missing rights - even I am Admin! I must always store the data with a new name, then it works, but I also cannot remove the old datas or shift them into the waste paper - because of no rights! -- sorry for not perfect english, I am German native speaker! Tahnks a lot for help!

    Hi,
    I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
    In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
    The issue I did describe above, but it was a long explanation.
    In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
    For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
    More explanation I gave above.

  • T410: display driver problem // display does not turn on again after turned of by e.g. (fn+F3)

    Hello,
    I have a problem with my T410 (model: 25223FG)with Nvidia NVS 3100M  (driver version 8.17.12.5738  (27.06.2010) ) .
    The Fn+F3 Key-Command is configured to turn of the display.
    In almost 50% of the cases where I use the Key-Command (fn+F3), the display turns off but does not turn on again on mouse movement or key-press or touch-pad action. The faulty behaviour occures always when the T410 is connected to the AC adapter. And the chance of the display not turning on again seems to become higher with increase of the duration between Key-Command and mouse movement.
    In these test cases my energy manager configuration was set to not turn of anything, when connected to AC.
    If I configure it to turn of the display after some time I am experiencing the same problem.
    So my question is:
    Does anyone have a suggestion where to start? (display driver, bios,...)
    Regards
    Jonny

    Hello,
    I have a problem with my T410 (model: 25223FG)with Nvidia NVS 3100M  (driver version 8.17.12.5738  (27.06.2010) ) .
    The Fn+F3 Key-Command is configured to turn of the display.
    In almost 50% of the cases where I use the Key-Command (fn+F3), the display turns off but does not turn on again on mouse movement or key-press or touch-pad action. The faulty behaviour occures always when the T410 is connected to the AC adapter. And the chance of the display not turning on again seems to become higher with increase of the duration between Key-Command and mouse movement.
    In these test cases my energy manager configuration was set to not turn of anything, when connected to AC.
    If I configure it to turn of the display after some time I am experiencing the same problem.
    So my question is:
    Does anyone have a suggestion where to start? (display driver, bios,...)
    Regards
    Jonny

  • Does exist any way to working by vectors in Photoshop ?

    I dlike to use some vector as a Photoshop brushes.... for example i make some graphics as you can see on picture 1 (it is AdobeIllustrator). Edges are nice smoothly. ..Then I exporting the same graphics from illustrator to Photoshop (as you can see on the pic 2). Edges are not smooth. Displayed graphics is rasterized and if i wont to sett bigger size of picture(graphics) then output is not good for me. Any Idea to solving this problem ?

    does exist any way to working by vectors in Photoshop ?
    Simple answer: YES
    From your screen shots, your main problem is, you are working at too low a resolution.
    Photoshops vectors are real vector objects. They are not "faked" at all. The Resolution of the file (similar to Illustrators pixel size in document setup) just sets how large the vectors will be rasterised, if output as a flat pixel based file.  It doesn't mean that structurally Photoshops vectors are inferior to Illustrators vectors. In the end ALL printed output is rasterised at some point - and you upsample the containing document for Photoshops vectors to massive sizes if necessary.
    You can copy and paste simple vector shapes from illustrator. You don't need to use Smart Objects. These pasted vectors can also be created directly in Photoshop - they be Vector layers, or paths.They can be reshaped, and worked with as vectors in Photoshop.
    Now as Zeno says, brushes, in Photoshop, must be rasterised.If you still want to use illutstrators vector "brushes" you can use Smart Objects.

  • HT1338 why does the only way to get on wireless interent is airport?

    Why does the only way to get on wireless interent is airport?

    Airport is the trade name Apple uses for WiFi.  The Mac built-in WiFi hardware is called Airport.  The Apple manufactured WiFi base station(s) router are called Airport Extreme and Airport Express (the Apple Time Capsule is also a WiFi base station/router).
    A Mac can connet to other manufactures WiFi base stations.
    You can also connect to a WiFi bridging device via ethernet and get WiFi access that way, although BDAqua's suggestion of a USB WiFi device might make more sense if it is a Mac laptop.
    If you are NOT talking about WiFi, and perhaps talking about using the cell phone cellular network, then you can use Bluetooth to pair your Mac with a cell phone that has the ability to act as a cellular modem for your Mac, you can get a MiFi device that acts as a local WiFi base stations and connects to the Cellular network, and you can get cellular USB devices that can provide cellular connections for the Mac.

  • My phone ran out of battery as it was updating to iOS 6. Now it is having trouble rebooting. The silver apple logo keeps showing up and fading away. And doing it all over again... What should I do PLEASE help!! My phone is NOT jailbroken.

    my phone ran out of battery as it was updating to iOS 6. Now it is having trouble rebooting. The silver apple logo keeps showing up and fading away. And doing it all over again... What should I do PLEASE help!! My phone is NOT jailbroken.

    I should mention, it was on low power as I was using it.

  • I have created a slide show for a funeral buts it is taking too long to transfer to sub (like 24 hrs  ). Is this normal or should I be doing this another way ?

    I have created a slide show for a funeral buts it is taking too long to transfer to sub (like 24 hrs  ). Is this normal or should I be doing this another way ?

    Not the only one. Though I have not retryed my installation. Here is what happen to me and please verify if you had the same (sounds like it).
    1. Installed 10.8.4 on top of 10.8.3 and install went fine.
    2. I have installed a Niffy Drive (though no SD in it) ... but did not realize potential problem you suggest.
    3. its a MBPr
    4. Boot took for every (it 40 seconds from after I logedin to system screen on 10.8.3) but after (ie on 10.8.4) took forever 10-15 minutes with a cursor in the upper left on a white/gray screen.
    5. I reinstalled to 10.8.3 and all works as before
    6. But sounds like after removing niffy dirve I should reinstall??? Ie the problem I described was the same as yours.

  • Ipod Starts up, stops, resets, and does it all over again...

    Hey all,
    I tried searching but couldn't find anything like what I have. I recently purchased a new laptop, swapped my old library onto the new laptop, and then went to 'sync' on the new laptop. Things seemed to be working fine, unplugged the ipod, let it sit for a few hours...went to turn it on and it froze up. Reset it, but now, it loads up, shows the apple symbol (you can hear the HD winding up) gets about 4-5 seconds into it, clicks off, then starts it all over again.
    I've been unable to get it to do anything...it won't reset, connecting it to a power source doesn't do anything, and of course, it does this for as long as it can then the battery burns its self out.
    Does this sound fixable without bringing it in?
    Thanks guys,
    Jared

    This exact same thing happened to me, and I have a solution. What I did, is I just let it sit out, and do its thing (restarting a bunch) then it eventually went to the main menu. I plugged it into my computer, and did a restore.
    Now if that doesn't work for you, you may need to force mount it. Plug the iPod into your computer, and hold down the middle and play/pause button. Hopefully it should stop its nonsense and show up in your computer and let you do a restore in iTunes.
    Oh, and welcome to Apple Discussions!

  • Zen Stone Plus: Does it start playing again where i stopped the so

    I hope one og you can help me.
    I want to know if the Zen stone Plus MP3 player starts in the same song after it has been turned off.
    So if I turn it off 3.4min in a song, does it then start at 3.4 when i turn it on again, or does it start from the beginning of the song
    The reason i ask is because i often use the mp3-player to hear "sound-books", and the files are often very long, so its very annoying when my current mp3 player starts from the beginning of the file after i have heard maybe 30 min

    I believe the pattern with the Stones has been that if you plug them in for charging, even if you don't update the mp3s, playlists, etc., they essentially get "reset" when they resume.
    They pick up where you left off as long as you *don't* plug them in for charging, changing what's loaded, etc.
    I don't recall it being possible to do something like set a bookmark.
    Basically, you should have several hours of play / resume time like you desire, but if you have to charge the player at some point, you'll have to go back to the beginning of the file. Not sure if they can alter this in future firmware or not.

  • Whenever a download is finished, my windows toolbar unhides itself. Only after clicking on the download window does it autohide itself again.

    I have my windows (7.0) toolbar on auto-hide so that it doesn't clutter up my screen. But whenever I download a file with Firefox, the download window triggers the toolbar to pop up. Only after clicking on the download window does the toolbar rehide itself. Is there a way to get the download complete event to not trigger a windows event (or whatever it is that causes the toolbar to pop up)?
    == This happened ==
    Every time Firefox opened
    == I downloaded files

    The showAlertOnComplete didn't work. I downloaded and installed the download manager program and that seems to have done the trick.
    Thanks

  • Logic 10 at start up askes to download content. After doing so it asks again repeatedly. Midi instruments are corrupt. ???

    Noticed that the SoCal midi stick clicks were replayed to another instrument. the program asked to download additional content. after doing so the program repeatedly asks to perform the same task. a continual loop after download is complete. Also notice other midi instruments being replaced. Buggy, this software be!
    D

    Downloading 'Additional Content' or the Logic Pro X app Tips
    Pay particular note to the tip about using Ethernet rather than WiFi...
    Also make sure you repair permissions using the Disk Utility before trying again....

Maybe you are looking for

  • Windows 8.1 update errors

    i have problems with this update

  • Problem in Language Convertion in Smartform

    HI, i  have converted  smartform text from EN to Spanish using SE63. Coversion is ok . but  My problem is in english the charater format   is BOLD. in Spanish it is not displaying in BOLD. if i execute the only Form it is Giving BOLD both in English

  • Still images too pixelated

    hi need help with still images looked great in the viewer ,but in timeline and canvas they look too pixelated and poor quality, any ideas as to what i am doing wrong any advice ealy appreciate thankyou simon

  • Missing Playlist Information... top 25 played etc

    *Can anbody help me please... i had a damaged file in my iTunes library and lost 50 albums, i deleted all my music from iTunes and then consolidated all my music on my PC back into iTunes, problem solved, my missing music returned! except that i lost

  • Word 2004 crash - PLEASE HELP

    please help i cannot open word- it "quits unexpectedly" i have tried trashing the program and reinstalling it. this is the apple report: Process: Microsoft Word [432] Path: /Applications/Microsoft Office 2004/Microsoft Word Identifier: com.microsoft.