Zen Stone Plus: Does it start playing again where i stopped the so

I hope one og you can help me.
I want to know if the Zen stone Plus MP3 player starts in the same song after it has been turned off.
So if I turn it off 3.4min in a song, does it then start at 3.4 when i turn it on again, or does it start from the beginning of the song
The reason i ask is because i often use the mp3-player to hear "sound-books", and the files are often very long, so its very annoying when my current mp3 player starts from the beginning of the file after i have heard maybe 30 min

I believe the pattern with the Stones has been that if you plug them in for charging, even if you don't update the mp3s, playlists, etc., they essentially get "reset" when they resume.
They pick up where you left off as long as you *don't* plug them in for charging, changing what's loaded, etc.
I don't recall it being possible to do something like set a bookmark.
Basically, you should have several hours of play / resume time like you desire, but if you have to charge the player at some point, you'll have to go back to the beginning of the file. Not sure if they can alter this in future firmware or not.

Similar Messages

My zen stone plus 2Gb not starting

i have been using my Creative Zen Stone Plus 2GB since past 7-8months
recently it started giving problems. It dint start up and when i connected to my computer it is asking me to format the dri've when i try to open it..and when i click to format..it says it cant format and then the dri've vanishes from My Compute.
I took to the service centre..tht guy he said he updated the firmware..i came bak ad connected it to my pc to charge...my winamp detected it as an mp3 player and asked me to synchronize which i cancelled..
open the dri've...then when i tried to delete the files...same prob started again!!!
now the dri've doesnt even show up in My Computer..
wat to do?

Moniushko,
Looks like something is wrong with the device, I would get in touch with support if I were you.

Zen Stone Plus: does not charge/power on / isn´t reconized by my

Hi!?Bought a few days ago a zen stone plus but haven't tested it. Aboiut 2 weeks later I opened the boix and noticed the player does not charge, or power on and is not recognized by my pc as well...
What should I do? The shop where I bought it is about 600 km away from my home...
Regards?

Try it on another PC if you can to be sure the player is having a problem, if it does the same there then I would advise contacting Customer Support so they can assist you.
Cat

NEW Zen Stone Plus does not work

It looked like it started to charge, but then it just died and Windows does not detect the dri've. I have tried hooking it up to another computer but no go!
I've tried all the troubleshooting on the page and nothing seems to work, it's just completely dead even though it's brand new. I wasn't even able to upload songs to it.
any tips? or should I just send the player back? The problem is that I am in Iceland and bought it in Toronto, Canada so I would like to try everything before sending it.
thanks in advance!

I used these instructions and got all the way to reloading the firmwear. Then it said to restart the comp and I did and after that nothing! What am I doing wrong?
Hi everyone
There is a Recovery Mode for the flash-memory players although it is different from the Rescue Mode for the HDD players - that is used for carrying out maintenance operations on the player but Recovery Mode for the flash-memory players is just a different way of connecting your player to your PC when it won't normally connect, for example, when the firmware has become corrupted and the player won't start and isn't recognised by the PC. It is in fact a way of communicationg directly with the STMP3500 chipset that these players use without needing any additional firmware.
Creative themselves called it Recovery Mode - it was first seen when Creative posted the instructions for a previous firmware upgrade that could not be run when connected normally. For the N200 it was in the instructions to upgrade to version .5.0.
Here's a line from the instructions for the latest N200 firmware upgrade, v.20.04:
When prompted to set your player in Recovery mode, disconnect your player from your computer.
Here are the instructions:
. Download and install the Mass Storage Drivers from the website.
2. Press and hold the Play button while connecting your player to the PC. If you have a one-piece player then remove the battery first.
3. Keep pressing Play until the New Hardware Wizard starts - this will only happen the first time you put your player into Recovery Mode.
4. Complete the New Hardware Wizard.
To check that you are in Recovery Mode open Device Manager (right-click My Computer and choose Properties, then the Hardware tab and Device Manager) and look for a Player Recovery Device entry.
When in Recovery Mode you can reload the firmware.
PB

Videos on youtube pause suddenly and they start playing again when I move the mouse, this is very frequent now-a-days....OS:Windows 7, Latest flash, Firefox 16

NAnanana

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems caused by recent Flash updates and try these:
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows

Creative Zen Stone Plus Returns First Track On Player After Recharge

? Hi Everybody... I didn't see this topic posted on another thread, but I wasn't going to read thousands of posts to get this answer either. My problem is I own two players, one is a Creative Zen Stone and the other is the Zen Stone Plus. My Zen Stone does not return to the first track on the player when I recharge it (it remains on the same track), but the Zen Stone Plus does. This normally wouldn't be a big deal, but my mother-in-law listens to audiobooks. Sometimes those books don't have seperate tracks which means there is a single track that runs for like 6 - 8 hours. Is there a way to allow the player to pick up where it left off? It is a real pain to have to fast forward through most of an audiobook, especially when my player (the less expensi've player) continues where it left off. BTW.... Letting her have my player is not an option since hers has a display screen and mine doesn't.

So, reading the forum, it seems we have seroiusly problems with charging.... I'll try all I've read: disabling "energy conservation mode" on USB root, using an USB powered hub as Battery Charger, updating the Firmware, formatting / resetting the player and then using cml and the led to charge it to the full. I hope it solves, at least for me.... ?

Zen Stone Plus Returns to First Track When Recharged???

7Zen Stone Plus Returns to First Track When Recharged?Y Hi Everybody... I had originally posted this question several months ago, but I didn't receive a response.
I didn't see this topic posted on another thread, but I wasn't going to read thousands of posts to get this answer either. My problem is I own two players, one is a Creative Zen Stone and the other is the Zen Stone Plus. My Zen Stone does not return to the first track on the player when I recharge it (it remains on the same track), but the Zen Stone Plus does. This normally wouldn't be a big deal, but my mother-in-law listens to audiobooks. Sometimes those books don't have seperate tracks which means there is a single track that runs for like 6 - 8 hours. Is there a way to allow the player to pick up where it left off? It is a real pain to have to fast forward through most of an audiobook, especially when my player (the less expensi've player) continues where it left off. I haven't seen a download for this, so I'm wondering if it's something that can be fixed or not?

For future benefit to others, I'll answer my own question: No, the Zen Stone Plus should not lose it's place when plugged in for charging or adding files. I just purchased a second Zen Stone Plus, this time the one without the speaker and it remembers track location after charging.
Good thing I'm RMA'ing the first one!

Zen Stone Plus wont play some mu

My player is only playing about a third of the songs that is on the player
Does anyone know how to fix this?

I've just started to find out how we can use folders as playlists on the Zen Stone Plus. So I started to create a couple of folders in the root directory of the Stone Plus. However it seems like I cant create more than 4 folders, so that's kinda like saying I can only have 4 playlists. Am I doing something wrong or is there really such a limitation for this mp3 player?

Zen Stone Plus 4GB - Automatic Shutdown - IT DOES NOT WORK

:Zen Stone Plus 4GB - Automatic Shutdown - IT DOES NOT WORKVHello!
I do possess this MP3 Player (with integrated speakers) for more than 2 years now and have never been using the Automatic Shutdown function of the player (in the menu settings). Yesterday, I went to bed, wanted to listen to some music and tried out this function the first time, but it did not work. I tried it with 5, 0 and 30 minutes. What am I doing wrong or is this setting just a joke?
I am using the current software/firmware and am not a newbie to technical instruments so I do know how to - theoretically - start this function by going to setting - Automatic Shutdown - scrolling to the minutes I want to have - Enter/Confirm with the middle ball-knob at the front of the player.
Maybe some of you might help me, I would highly appreciate that.
Kind regards
Guyfromgermany

Hi JLM, am running .0.05e fine and in fact listening to it at the moment. Is there anyway you can regress back to .0.03 to test your theory? Testing a bunch of 28k CBR MP3s is an easy thing to try also.Message Edited by BlueRobin on 0-02-200802:49 PM

Zen Stone Plus Speaker. Browse music without starting the first song in the next fold

Hi everyone,
I'm not sure what I want is possible.
I've had this player for about a?week now and I believe I could browse to the folders while listening to a song. For some reason when I do that now the player?start playing the first song of every folder when I browse through it.
I'm starting to doubt if I remember it right that it was possible to browse through while listening to a song before?
I tried playing with the setting and even did the recovery tool thing to put the player back at the setting it came with. But it didn't work.
Anyone know if this is posible, and how?
Thanks.

Tag support: the ability to select music by album/artist/track instead of folders
Display always on option - i know its to help save battery life but sometimes it would be helpful if the display stayed on
Display artist and song name, inst4ead of just the song name/file name
Alarm clock function: my Zen stone plus has a speaker, and a clock function. My Zen Xtra has a clock and an alarm clock function but no speaker other than headphones (if any are plugged in) for the alarm to sond through, the same is true with my visio:M? the Zen Stone plusw/speaker has a clock but no alarm, and if anything it would make a fantastic little alarm clock with a 'sound' to music or wsound to beep? function.

Certian bands/artists not showing up on Zen Stone Plus when they are on the play

I got my zen stone plus a day ago. I've been using windows media player sync to get music onto it?But when I sync it once, I cant seem to get more artists on when I sync again. It says the songs are on there through the actual file... but they aren't showing up on the player!?any idea how to fix this?

I am also having a problem like this. I have tried to add to the music on my Zen Stone + using the Creative Media Lite software. It is transferred, I disconnect the player properly but when I try and browse to the music it is not there. I have then re-tried, just transferring the album folder directly under the Music folder, and it works! I have other tracks using the dri've:\Music\Artist\Album folder structure and they work, so what is going on? Maybe the ZEN doesn't like The Decemberists!

Lame Foldernavigation with Zen Stone plus with spea

I purchased the 4GB Model because i hear a lot of Audiobooks. Those are organised in folders. I downloaded the manual / help file before purchasing and was quite happy that the Zen support folders. Now im disappointed the way the Zen Stone handles them. I added some other shortcomings and suggestions of improvement too.
Its not possible to navigate into/out of a folder. Instead you see every folder regardless of it'ss hierachy level. Although the player "supports" up to 4 hierachy levels. This is really disturbing. I want to use those leves to organize my files and to increase overview. Its not possible! So it makes no sense to organize your files as Zen does not show the structure.
So i have to scroll through hundreds of folder. What increases problems is that you cant do that fast. Every time i go to the next folder Zen starts playing this folder. This is not only annoying but takes about 3 sec of time. It gets a little faster if dont hold the button but than you have to press the button so many times.
Great you can turn the display bei 80 degrees. Even greater would be to do that in 90?s ste
ps.
I like to use headphones which also work as a strap so hanging around my neck i can't read the display properly. Due to it'ss round shape it would make even more sens to make this possible. You can even think about making the 4 buttons displayrelevant. (There function rotates with the direction of the display.) The display is big enough to display some tiny icons like the play triangel or a + and - sign. Then you would have softbuttons which can even become other functions you can see directly.
Its good the display turns off after a while to preserve energy. But i dont like to press buttons then different/more. Now after max. 30 sec it turns off. The next press turns it on again and only after this it'ss reacting normally on pressing buttons.
Im kind of used to press the center button for play / stop. Not only the ipod shuffle but many, many (soft)players work exactly the same way. So im kind of confused to press the tiny double button on the headphone side which is barely reachable particulary if you use the silicon cover. I know, i can press the center button twice but after 30 sec i have to press it three times! Just to pause the playback. This can't be!! Imagine how often you have to pause the playback and how often you change settings etc. I really think the functions of those buttons should be exchanged.
The speed of rewind, forwarding should increase over the time you hold those buttons. Now its about 0 sec. which is not enough. This is particulary useful for audiobooks.
If you switch to/playback another file via Directory search Zen should memorize the songposition of the last song. (Bookmark-function) This is also particulary useful for audiobooks.<
I have a suggestion to solve problem and 2:
No folder starts playing just by selecting.
The folder view is recognzied.
If a folder contains songs (not only other folders) those are shown and can be selected/played.
Its visible by an icon or an different font if folder are empty or contain other folders.
With the +,- buttons you go to the next, previous folder / song. This goes as fast as you press. Holding those buttons starts scroll/selecting which increases speed by the time of holding.
The I<< and >>I - Buttons expands/collapses folder.
Holding those buttons for longer collaps / expands all folders.
The Center Buttons plays the folder / song and returns to the playback view.
Lots of ideas. I hope someone appreciate them and maybe some of them can wind up in an firmware update someday. That would be awesome.
Nevertheless i love my zen.
Alexandra

Hi,
Yeah..appreciate it very much.
I'll pass this to someone here for their reconsideration.
Cheers.

Zen Stone Plus Charg

Good day! I have a problem with my Creative Zen Stone Plus unit. The battery does not get a full charge and according to my Creative Media Lite, it's only 20% or so full. However, when I turn the player display on, it indicates that the charging is already complete (blinking blue LED and a plug sign instead of the lightning sign). In turning the product on, it reads that the player only has two bars? left and then turns to one bar after just 5 minutes of playback. This is crazy since I charge it as sson as the battery indicator reaches one bar. So obviously, it isn't charging. I've already installed the new firmware, resetting and formatting the player, and everything else that I could think of I've already tried them. Went through the messages in this site and all I can see are problems with their own players and no worthwhile solution from the Creative Tech team. I went on as much as to locally look for the service provider of Creative here in the Philippines but they all seem to know less than myself regarding the product.
A side question and comment is if it would be better for my battery to run until there's no more bars in the indicator left (not necessarily drain it) or charge as soon as it hits one bar. The crazy thing is, I'm presumming with the hassle that it is producing, most probably the battery is not in its optimum condition anymore due to the trials that I have been doing to resolve this problem. The crazy thing is that the service provider I've been mentioning also told me that I can charge the player even when it is on, now reading the messages and from my stock knowledge I realized that what she did was irresponsible and utterly detrimental for my battery. This is such a sad condition considering that Creative is just building its name and they seem to be unable to provide a good customer support base for their clients.

Not sure if this hel
ps.
.. I had a similar issue with my new Zen Stone.... Following it's first charge (+3 hours), I used?the player?until the battery went 'flat' and it turned itself off... I tried to charge the player up several times?without success - Creative Media Lite continually reported the battery as having 7% charge - but this never improved... Prior to me taking it back to the store I bought it from, I did a 'reset' (paperclip hole on the top side)... Low and behold - the player started to charge up again....

HELP! Brand New Zen Stone Plus WON'T TURN

Just received the product today, downloaded and installed the latest software. Charged the unit for 3 hours and successfully loaded mp3 onto the player. Following every direction and clicked the "safely remove hardware" option. All ready to go... press the on/off button... NOTHING HAPPENED! No screen! LED light did not turn on! NOTHING!
So went to Creative site and follow the "fix it myself" direction, reset the player did not work, formatting the player did not work. There is no firmware download available for Zen Stone Plus (only Zen Stone), so I could not try that option.
I am starting to think there is a defect in my player. Do you guys have any suggestion on what I should do? Does any know how to contact Creative's US customer support (email address and/or phone numbers)? And please don't refer me to the 3 dollars to 30 mins support because I already spent money expecting to buy a non-defecti've product.
I tried looking for the customer support number before posting this message. I did not know Creative have such a poor customer support system! I clicked the "email support" on its site and it directed me to some "fix the player yourself" page (I also tried those solution but did not help), and does not lead to any customer support number! HORRIBLE!Message Edited by misellu on 07-3-20070:6 PM
****** UPDATE*********
Thanks for everyone's suggestions.
Since I didn't want to spend more time to fuzz over a defecti've product, I returned my Zen Stone Plus to Amazon (I did this because I know sending it to Creative would take much longer time before I receive a replacement). Amazon sent me a new one in about 3 days at no charge (and free return shipping). The new one works fine now and does everything its suppose to do (so far...).
Just like I wrote it when I posted the problem, I tried different time intervals and it still wouldn't turn on. I couldn't have lock the unit because it requires power on to turn on the lock (which I was unable to turn on the unit).
The lesson I learn here is think about the product's customer support and where I am buying from before purchasing anything online. I would definitely think twice before buying Creative's products again.
Message Edited by misellu on 08-05-200702:2 PM

mine wont turn on after almost two weeks since i bought my player. i went to the store where i bought my player, asked them to replace my player right there and then (because i firmly believed that it was a factory defect) but to no avail. so i let the creative support checked my player and voila! my player was infected with WORM VIRUS!!! they fixed my player, deleted the virus and was all set after 2weeks. i scanned my computer, found A LOT OF WORM VIRUS, deleted them before connecting my player to this computer. after transferring files to my player & disconnecting it from this pc, it wont turn on again!! and i havent used it for at least 0mins since i got it back! darn!! i'm gonna return it again to the storea and ask for creative support's help again. does anybody know if there is an anti-virus available for zen products?

Zen Stone Plus won't turn

Hi,I recieved a new zen stone plus for christmas and it told me to charge it for at least 3 hours.Well...it's been 2 days and I can't get it to respond or turn on. It responds when i plug it into the usb and it says it's charging, but the light never blinks. It just keeps charging.When i hit menu, it does nothing at all.Any ideas?

One might want to read this thread..... right here..... http://forums.creative.com/creativelabs/board/message?board.id=dap&thread.id=2477
You know, the one that is stickied.....
More specifically, this part.......
"Battery - Lithium-Ion Polymer
#. Battery won't charge "out of the box" new player.
A. First, read above "Getting Started"
B. Next, try a different USB mini cable.
C. Next, there is a battery manufactuer's failure rate < %, in which the Lithium-Ion Polymer battery refuses to charge.
Creative, ships the Zen MP3 players with no charge so there is very small probability that? you could have one.
I call it the "Deep Six Discharge Battery" Call / Contact Creative.
#2. Battery won't charge properly after using the player for some time.
A. When you plug in your player into the USB port via mini USB patch cable, the connection resets the player to the "docked screen" with the battery level gas guage , in the right hand corner.
Sometimes this action does not reset the player properly but there is no indication to you that the player is charging.
Just disconnect/connect the USB cable again.
B. Sometimes, the Zen player gets confused and you have to do a Recovery Mode "paper clip reset" which forces the player into a "special menu screen" to clean-up the player and to reset the player which allows showing the "docked screen" while charging the unit. See Zen User's Guide for explicit instruction und FAQ.
C. Since the Zens came out late in 2007, the maximum of 300-500 charge/discharge should not apply YET? but users beware, as with any other Lithium-Ion Polymer battery it will not charge fully "like new"? because of a " fixed shelf life" (2-3 yrs)?OR too many charge/discharge cycles. A battery replacement is in order."
There is a reason why that thread is a sticky guys. You're supposed to read it.

Zen Stone Plus: Does it start playing again where i stopped the so

Similar Messages

Maybe you are looking for