IEEE 802.11k roaming with client and cisco router
I found information that Cisco supports IEEE802.11k WLAN standard with their routers.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/5700/software/release/ios_xe_33/11rkw_DeploymentGuide/b_802point11rkw_deployment_guide_cisco_ios_xe_release33/b_802point11rkw_deployment_guide_cisco_ios_xe_release33_chapter_010.html
If read this article I think for assisted roaming I only need neigbor reports but IEEE 802.11k standard also defines several reports like channel load report etc.
Do I need these other reports also for roaming decisions if my device is a client?
The reason why you can't remote desktop is because you have configured the following static PAT statement that unfortunately take precedence over your NAT exemption:
ip nat inside source static tcp 10.10.1.2 3389 192.198.46.14 3389 extendable
Do you require RDP with the public IP? if you don't and only require RDP via VPN, then please take the static PAT statement out, and RDP via VPN will work.
Similar Messages
-
Mavericks VPN dropouts with native VPN client and Cisco IPSec
Since update to Maverics I am experiencing VPN dropouts with native VPN client and Cisco IPSec
I am connecting via a WIFI router to a remote VPN server
The conenction is good for a while but eventually it drops out.
I had Zero issues in mountain lion and only have issues since the update to 10.9
I had similar issues in teh past with an unrelaibel wifi router but i am using a Verizon Fios router and it has worked impecably until mavericks
My thoughts are:
1 -issue with mavericks ( maybe the app sleep funciton affecting eithe VPN or WIFI daemons)
2- Issue with cisco router compaitibility or timing with Cisco IPSEC
3- Issue with WIFI itself on mavericks - some sort of WIFI software bug
Any thousuggestions?Since update to Maverics I am experiencing VPN dropouts with native VPN client and Cisco IPSec
I am connecting via a WIFI router to a remote VPN server
The conenction is good for a while but eventually it drops out.
I had Zero issues in mountain lion and only have issues since the update to 10.9
I had similar issues in teh past with an unrelaibel wifi router but i am using a Verizon Fios router and it has worked impecably until mavericks
My thoughts are:
1 -issue with mavericks ( maybe the app sleep funciton affecting eithe VPN or WIFI daemons)
2- Issue with cisco router compaitibility or timing with Cisco IPSEC
3- Issue with WIFI itself on mavericks - some sort of WIFI software bug
Any thousuggestions? -
In this episode of the Adobe Creative Suite Podcast, Terry White shows how to share Photoshop, Illustrator and InDesign Files with clients and colleagues and all they'll need is a browser to comment and see your Photoshop Layers.
http://adobe.ly/10ZjpE4Terry,
I guess I miss something. How can I share a folder of photos? When I return from a shoot, I select 20 of the pictures and need to share them with my client to pick up the favorites. Am I supposed to copy and past an URL for each image separately?
Sometimes I also work with a colleague, I need to share my favorites with him. Same issue.
We have tried Adobe Cloud, and then went for Dropbox. There we can share a folder and he can put even his pictures in it as well. That's what I call collaboration. And it is free (unlike Adobe Cloud). If you have some word in Adobe, please tell them to either drop it and make a deal with services like Dropbox, or make it properly.
Thanks.
Vaclav -
I have a netgear managed switch and a cisco 1750 router. I would like to set up 2 vlans. the first one is a wan, with a residential cable model connected to it. the other vlan is for my private lan. I will then have the cisco router connected to one port on the switch set up as a trunk. I'm no pro, but from what I've read so far, it should work that way, right? the part I need help with is setting up the cisco router as a gateway and dns proxy, accepting the dynamic ip, gateway, and dns addresses from the cable modem.
I did see this http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Getting%20Started%20with%20LANs&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddcef50
router in a stick *write that down* so my setup should work if I can figure out the router configuration. a good online tutorial or something would be helpful for this. I have plenty of cisco books, but maybe something for dummies would help me get started, before digging into the tough stuff.In order to set up inter vlan routing or a "router on a stick" with a netgear switch you will need a router that supports IEEE 802.1q VLAN Support.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/8021q.htm#28767
On the router interface that is "trunked" to the switch you will need to have a configuration that looks like the what I have below.
Router(config)#interface FastEthernet0/1.1
Router(config-subif)#encapsulation dot1Q 1 native
Router(config-subif)#ip address 10.xx.xx.16 255.255.255.xxx
Router(config-subif)#interface FastEthernet0/1.2
Router(config-subif)#encapsulation dot1Q 2
Router(config-subif)#ip address 10.xx.xx.130 255.255.255.xxx
The sub-interface 1."2" corresponds to the vlan id on the trunk. In this case the .2 is vlan 2.
I have attahced a link that exlains the intricate details on inter vlan routing below:
http://www.cisco.com/warp/public/473/50.shtml
Lastly you may want to check the Cisco IOS feature Navigator. I was looking at it and I did not see that the 1750 has IEEE 802.1q VLAN Support. It looks like the 1751 is the first platform in the 1700 series that does. -
Hi, I'm trying to create Site-to-Site VPN between Cisco ASA 5505 and Cisco Router 3945.
I've tried create configuration with and without ASA wizard, but anyway it doesn't work.
Please help me to find where is the issue.
I have two sites and would like to get access from 192.168.83.0 to 192.168.17.0
192.168.17.0 --- S1.S1.S1.S1 (IOS Router) ==================== S2.S2.S2.S2 (ASA 5505) --- 192.168.83.0
Here is my current configuration.
Thanks for your help.
IOS Configuration
version 15.2
crypto isakmp policy 1
encr aes 256
authentication pre-share
group 2
crypto isakmp key cisco address 198.0.183.225
crypto isakmp invalid-spi-recovery
crypto ipsec transform-set AES-SET esp-aes esp-sha-hmac
mode transport
crypto map static-map 1 ipsec-isakmp
set peer S2.S2.S2.S2
set transform-set AES-SET
set pfs group2
match address 100
interface GigabitEthernet0/0
ip address S1.S1.S1.S1 255.255.255.240
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
crypto map static-map
interface GigabitEthernet0/1
ip address 192.168.17.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
access-list 100 permit ip 192.168.17.0 0.0.0.255 192.168.83.0 0.0.0.255
ASA Configuration
ASA Version 8.4(3)
interface Ethernet0/0
switchport access vlan 2
interface Vlan1
nameif inside
security-level 100
ip address 192.168.83.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address S2.S2.S2.S2 255.255.255.248
ftp mode passive
same-security-traffic permit intra-interface
object network inside-network
subnet 192.168.83.0 255.255.255.0
object network datacenter
host S1.S1.S1.S1
object network datacenter-network
subnet 192.168.17.0 255.255.255.0
object network NETWORK_OBJ_192.168.83.0_24
subnet 192.168.83.0 255.255.255.0
access-list outside_access_in extended permit icmp any any echo-reply
access-list outside_access_in extended deny ip any any log
access-list outside_cryptomap extended permit ip 192.168.83.0 255.255.255.0 object datacenter-network
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn_pool 192.168.83.200-192.168.83.254 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source dynamic inside-network interface
nat (inside,outside) source static inside-network inside-network destination static inside-network inside-network no-proxy-arp route-lookup
nat (inside,outside) source static inside-network inside-network destination static datacenter-network datacenter-network no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.83.0_24 NETWORK_OBJ_192.168.83.0_24 destination static datacenter-network pdatacenter-network no-proxy-arp route-lookup
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 DEFAULT_GATEWAY 1
crypto ipsec ikev1 transform-set vpn-transform-set esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set vpn-transform-set mode transport
crypto ipsec ikev1 transform-set L2L_SET esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set L2L_SET mode transport
crypto dynamic-map dyno 10 set ikev1 transform-set vpn-transform-set
crypto map vpn 1 match address outside_cryptomap
crypto map vpn 1 set pfs
crypto map vpn 1 set peer S1.S1.S1.S1
crypto map vpn 1 set ikev1 transform-set L2L_SET
crypto map vpn 20 ipsec-isakmp dynamic dyno
crypto map vpn interface outside
crypto isakmp nat-traversal 3600
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
group-policy GroupPolicy_S1.S1.S1.S1 internal
group-policy GroupPolicy_S1.S1.S1.S1 attributes
vpn-tunnel-protocol ikev1
group-policy remote_vpn_policy internal
group-policy remote_vpn_policy attributes
vpn-tunnel-protocol ikev1 l2tp-ipsec
username artem password 8xs7XK3To4s5WfTvtKAutA== nt-encrypted
username admin password rqiFSVJFung3fvFZ encrypted privilege 15
tunnel-group DefaultRAGroup general-attributes
address-pool vpn_pool
default-group-policy remote_vpn_policy
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group S1.S1.S1.S1 type ipsec-l2l
tunnel-group S1.S1.S1.S1 general-attributes
default-group-policy GroupPolicy_S1.S1.S1.S1
tunnel-group S1.S1.S1.S1 ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f55f10c19a0848edd2466d08744556eb
: endThanks for helping me again. I really appreciate.
I don't hve any NAT-exemptions in Cisco IOS Router. Transform-set I will change soon, but I've tried with tunnel mode and it didn't work.
Maybe NAT-exemptions is the issue. Can you advice me which exemptions should be in Cisco IOS Router?
Because on Cisco ASA I guess I have everything.
Here is show crypto session detail
router(config)#do show crypto session detail
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, T - cTCP encapsulation
X - IKE Extended Authentication, F - IKE Fragmentation
Interface: GigabitEthernet0/0
Session status: DOWN
Peer: 198.0.183.225 port 500 fvrf: (none) ivrf: (none)
Desc: (none)
Phase1_id: (none)
IPSEC FLOW: permit ip 192.168.17.0/255.255.255.0 192.168.83.0/255.255.255.0
Active SAs: 0, origin: crypto map
Inbound: #pkts dec'ed 0 drop 0 life (KB/Sec) 0/0
Outbound: #pkts enc'ed 0 drop 0 life (KB/Sec) 0/0
Should I see something in crypto isakmp sa?
pp-border#sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst src state conn-id status
IPv6 Crypto ISAKMP SA
Thanks again for your help. -
IPSec ikev2 between ASA and Cisco Router
Hi,
i try to do IPSec with ikev2 (SHA2) between ASA and Cisco Router, without success. Any one can help me ?
- Remote site (Router) with dynamic public IP -> Dynamic crypto map on the ASA
- Authentication with Certificats
- integrity sha2
I try a lot of configurations without success.
Thanks for your help.
MicThe more secure ike policy should have the higher priority which is a smaller number. So I would configure there the following way (policy 30 only if really needed):
crypto ikev1 policy 10
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 28800
crypto ikev1 policy 20
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 28800
crypto ikev1 policy 30
authentication pre-share
encryption aes
hash sha
group 2
lifetime 43200
The Cisco VPN Client is EOL and not supported any longer. And yes, by default DH group 2 is used. But that can be configured by a parameter in the PCF-file.
There are two (three) better options:
Best option with very little needed configuration:
Move to AnyConnect with TLS. AnyConnect is the actual Cisco client that is also supported with Windows 8.x. The legacy IPsec client isn't.
Best option with a little stronger crypto but more configuration:
Move to AnyConnect with IPsec/IKEv2.
Move to a third-party client like shrew.net. I didn't use that client since a couple of years any more, but it's quite flexible and also has a config for a better DH-group.
For option 1) and 2) there is an extra license needed, but thats not very expensive. -
Administration of ASA5520 and cisco router mpls 1900
Hi
i just want to administor cisco
ASA5520 and cisco router mpls 1900
can some tell me as admin what to check as u get into office /reguraly in cisco asa 5520 and vpn mpls router for administrator ,right now its working as configured by supplier for remote sites to connect HQ and access several server
My interest to know what are the basic day to day checkup on cisco asa5520 working as ips and cisco asa 5520 working as content filtering and cisco vpn mpls
thx ,attached pic for ur view
JHello Malai,
This question is subjective, I mean you can check the statistics on the CSC module for logs of the users going to blacklisted sites.
You can check the CPU for the ASA's and IPS.
You can monitor the amount of traffic traversing the interfaces of the ASA, you can determine witch host is using most of the bandwith,etc.
Its pretty basic administration stuff
Regards,
Julio
Rate all the helpful posts -
Having a problem with PEAP and Cisco 2960 Switch
Hi All,
I am attempting to use PEAP with a LDAP backend on FreeRadius witht he MS Supplicant. I have it all working, in debug on the Radius server I see it sending all the information, the tunnel, medium etc. but with PEAP the Cisco switch is not changing VLANS. If I install the Cisco or Juniper client it works just fine if I use eap-mschapv2 but peap-mschapv2 does not switch the port to the right vlan. Is there something extra on the switch I need to do to allows PEAP or is there something on the FreeRadius?
The only difference between the PEAP and EAP versions that I can tell is that the PEAP authenticates ands the information is sent once(according to the debug on the Radius server) where as with the EAP the connection information is sent several times, that is I will see the Tunnell and medium info sent more then once in the Radius log for just one login.
Any ideas?Thought I mentioned the client in the first post, I am using the 3 different types of clients with a goal of getting the MS client to work. I am using the Juniper Odyssey client, Cisco CSSC client and the MS built-in client. I mentioned the EAP-MSChanpV2 because I tested that login so I could compare the Radius output with that of PEAP-MSChapV2. I did not release logs from the Radius server because it seems to be centered with something on the switch changing Vlans but if you want output I can give that..
CSSC Client pops out:
14:25:08.453 Network Connection requested from user context.
14:25:08.468 Connection authentication started using the logged in user's credentials.
14:25:08.468 Port state transition to AC_PORT_STATE_CONNECTING(AC_PORT_STATUS_STARTED)
14:25:08.796 Port state transition to AC_PORT_STATE_UNAUTHENTICATED(AC_PORT_STATUS_8021x_FORCED_UNAUTH)
14:25:09.828 Port state transition to AC_PORT_STATE_AUTHENTICATING(AC_PORT_STATUS_8021x_ACQUIRED)
14:25:09.843 Identity has been requested from the network.
14:25:09.875 Identity has been sent to the network.
14:25:09.890 Authentication started using method type EAP-PEAP, level 0
14:25:09.890 The server has requested using authentication type: EAP-PEAP
14:25:09.890 The client has requested using authentication type: EAP-PEAP
14:25:09.968 Profile does not require server validation.
14:25:10.031 Identity has been requested from the network.
14:25:10.031 Identity has been sent to the network.
14:25:10.046 Authentication started using method type EAP-MSCHAP-V2, level 1
14:25:10.046 The server has requested using authentication type: EAP-MSCHAP-V2
14:25:10.046 The client has requested using authentication type: EAP-MSCHAP-V2
14:25:10.078 Port state transition to AC_PORT_STATE_AUTHENTICATED(AC_PORT_STATUS_EAP_SUCCESS)
14:25:10.078 The authentication process has succeeded.
*************************Raidus Ouptut for PEAP:**************************
[ldap] user RadiusUser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.7 seconds.
Waking up in 0.7 seconds.
Waking up in 0.1 seconds.
Waking up in 3.7 seconds.
Waking up in 0.1 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
[ldap] performing user authorization for anonymous
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: object not found or got ambiguous search result
[ldap] search failed
rlm_ldap: ldap_release_conn: Release Id: 0
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
Waking up in 0.9 seconds.
Waking up in 0.9 seconds.
Waking up in 0.9 seconds.
Waking up in 0.8 seconds.
Waking up in 0.8 seconds.
Waking up in 0.8 seconds.
[ldap] performing user authorization for RadiusUser
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user RadiusUser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.8 seconds.
[ldap] performing user authorization for RadiusUser
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user RadiusUser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.8 seconds.
[ldap] performing user authorization for RadiusUser
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user RadiusUser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.8 seconds.
Waking up in 0.7 seconds.
Waking up in 3.7 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
Ready to process requests.
**************************Radius ouput for EAP******************************
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.7 seconds.
Waking up in 0.7 seconds.
Waking up in 0.1 seconds.
Waking up in 3.7 seconds.
Waking up in 0.1 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
[ldap] performing user authorization for Radiususer
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.9 seconds.
[ldap] performing user authorization for Radiususer
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.9 seconds.
[ldap] performing user authorization for Radiususer
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.9 seconds.
[ldap] performing user authorization for Radiususer
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.9 seconds.
Waking up in 3.9 seconds.
Ready to process requests.
Hope that Helps. -
Radius 802.1x authentication with computer AND users.
Hi !
I don't know if what I trying to do is possible so please excuse me if this sounds silly :)
I have a Cisco Wireless lan manager where I've configure 2 differents SSID's : COMPANY and COMPANY_mobiles.
What I want is to create a policy to restrict the access to the COMPANY SSID to only my company laptops with authenticaded users (both groups exists in the AD).
Therefore I created a new policy with the following conditons :
- NAS Port Type : Wireless
- Client IPv4 Address : <my cisco ip>
- Called Station ID : ^AA:BB:CC:DD:EE:FF:COMPANY$
- Users Groups : EUROPE\MY_USER_GROUP
- Machine Groups : EUROPE\Domain Computers
When trying to connect a notebook on windows 7 to that COMPANY ssid, I'm beeing rejected with the following error :
User:
Security ID: EUROPE\HOSTNAME$
Account Name: host/HOSTNAME.my.server.com
Account Domain: EUROPE
Fully Qualified Account Name: EUROPE\HOSTNAME$
Authentication Details:
Connection Request Policy Name: Secure Wireless Connections
Network Policy Name: Connections to other access servers
Authentication Provider: Windows
Authentication Server: My.radius.server.com
Authentication Type: EAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 65
Reason: The Network Access Permission setting in the dial-in properties of the user account in Active Directory is set to Deny access to the user. To change the Network
Access Permission setting to either Allow access or Control access through NPS Network Policy, obtain the properties of the user account in Active Directory Users and Computers, click the Dial-in tab, and change Network Access Permission.
It therefore seems that it doesn't match my network policy and falls bacj to the default one.
If I remove the user rule, and let the computer rule : Connection OK
If I remove the computer rule, and let the user rule : Connection OK
but if I put both, i can't connect :s
Can someone help me with this issue ?
Thanks a lot !
GeoffreyHi Geoffrey,
I would like to know if
EAP-TLS wireless authentication has been used since it uses user and computer certificates to authenticate wireless access clients.
Please try to use NPS wizard to configure 802.1x wireless connection,
and
you will find that it
creates new connection request policy and network policy. Network policy NAS Port type will be "Wireless -Other OR Wireless -IEEE 802.11".If
you
need filter by user and computer account, the log should show both authenticate user and machine account name.
EAP-TLS-based Authenticated Wireless Access Design
http://technet.microsoft.com/en-us/library/dd348478(WS.10).aspx
Regards, Rick Tan -
802.1x Authentication with Windows and MAC
Hello Team;
I have one SSID configured with 802.1x . The clients with Mac machines can directly join to the network by just entering the AD usrename and password. For the windows machines we need to do some configuration in the clients machines to work with the SSID.
Could you please clarify ? Whether the windows machines will just work like the Mac or the preconfiguration is mandatory to work windows with 802.1x.Hello Sreejith,
As per your query i can suggest you the following steps-
No, the preconfiguration is not mandatory to work windows with 802.1x.To enable 802.1x authntication on wireless follow the steps-
1.Open Manage Wireless Networks by clicking the Start button , clicking Control Panel, clicking Network and Internet, clicking Network and Sharing Center, and then, in the left pane, clicking Manage wireless networks.
2.Right-click the network that you want to enable 802.1X authentication for, and then click Properties.
3.Click the Security tab, and then, in the Security Type list, click 802.1X.
4.In the Encryption Type list, click the encryption type you want to use.
On wireless networks, 802.1X can be used with Wired Equivalent Privacy (WEP) or Wi‑Fi Protected Access (WPA) encryption.
5.In the Choose a network authentication method list, click the method you want to use.
To configure additional settings, click Settings.
Hope this will help you. -
IEEE 802.1x Authentication with RADIUS failed
Hello guys,
I've a little strange Situation.
If user start his Computer (Windows 7 enterprise) and computer is connected via LAN it works fine.
If user start his Computer (Windows 7 enterprise) and computer is connected via WLAN it works also fine.
But if user start his Computer (Windows 7 enterprise) that is connected via LAN it is not more possible to connect to WLAN (parallel). I've implemented an IEEE 802.1 RADIUS authenticiation.
It does not work with this special user account. I've tested it already successful with couple other accounts.
Does someone has experience with such Situation?
Regards
RodikIt does not work with this special user account. I've tested it already successful with couple other accounts.
Hi,
Did you mean that this problem just occures to the single User Account but others works fine at same computer, isn't it?
When it connect Wlan failed, is there any error message? Have you tried to reinstall the WLan device driver for test?
it would be better to provide more details about the Wlan connect failed.
Roger Lu
TechNet Community Support -
Schedule type LineChart with clients and unavailable start and end dates
I have been working on trying to get something in flex which will display a list of clients and their unavailability start and end dates. I have attempted the line chart and the HLOC chart but have not seen success. I do have the H or V grids working fine. But getting the data to display in a line graph based upon start date and end date has been my challenge. any suggestions
Current Code:
<s:Label x="0" y="5" text="Min Date" height="24" fontFamily="Times New Roman" verticalAlign="middle"/>
<mx:DateField id="minDateField"
x="50" y="5"
formatString="MM-DD-YYYY"
selectedDate="{minDate}"
change="minDatefield_changeHandler(event)"/>
<s:Label x="150" y="5" text="Max Date" height="24" fontFamily="Times New Roman" verticalAlign="middle"/>
<mx:DateField id="maxDateField"
x="200" y="5"
formatString="MM-DD-YYYY"
selectedDate="{maxDate}"
change="maxDatefield_changeHandler(event)"/>
<mx:LineChart id="nonAvailsLC" x="0" y="40"
showDataTips="true"
dataProvider="{getNonAvailsResult.lastResult}"
creationComplete="nonAvailsLC_creationCompleteHandler(event)"
width="890" height="550">
<mx:backgroundElements>
<mx:GridLines gridDirection="both"/>
</mx:backgroundElements>
<mx:horizontalAxis>
<mx:DateTimeAxis dataUnits="days" minimum="{minDate}" maximum="{maxDate}"
labelUnits="days"/>
</mx:horizontalAxis>
<mx:verticalAxis>
<mx:CategoryAxis categoryField="user" labelFunction="getName"/>
</mx:verticalAxis>
<mx:series>
<mx:LineSeries xField="startDate" yField="user"
form="horizontal"/>
</mx:series>
</mx:LineChart>I guess I still have lots to learn about Flex and Renderers. I downloaded a Gantt chart with Code and they used the AdvancedDataGrid with renderers and such. I modified the code to work for me. but if I had to create it myself right now, I would be in trouble. Lots more to learn.
-
Server slow down with client and server slowdown
The problem started a couple of weeks ago and it has been hard to nail down. When people are working there are times when the computers will pause for a few seconds(1 to 5) and then continue. It doesn't seem to be any one program or type of computer (G4 or G5). Everybody that is experiencing the problem is logged in via the OS X server with their Home directory on the server. If we create a local user the problem doesn't appear. It seems to point to the OS X server but all indicators show the server is hardly doing anything thing at all. Very low CPU utilization, disk usage, network traffic, throughput, and the system memory never maxs out.
We switched to a different X Server, same problem.Everything is running 10.3.9 client and the server version is 10.3.9The problem started a couple of weeks ago and it has been hard to nail down. When people are working there are times when the computers will pause for a few seconds(1 to 5) and then continue. It doesn't seem to be any one program or type of computer (G4 or G5). Everybody that is experiencing the problem is logged in via the OS X server with their Home directory on the server. If we create a local user the problem doesn't appear. It seems to point to the OS X server but all indicators show the server is hardly doing anything thing at all. Very low CPU utilization, disk usage, network traffic, throughput, and the system memory never maxs out.
We switched to a different X Server, same problem.Everything is running 10.3.9 client and the server version is 10.3.9 -
Will Time Capsule work with a Cisco Router E4200 that is connected to a Worldbook NAS?
I do not need it to serve as a router, only a sytematic backup solution fro all of our Macs in the network. We use the NAS as a company client File store and share internally to our staff.The TC can be bridged and plonked into the network with no problems.
Decide how you will treat wireless.. you can handle it several different ways.. but completely off might be best. Or if you are buying a new AC model, then turn off the wireless in the E4200 and see if the TC works better.
Or if you have some ethernet cabling.. place the TC in wireless dark area and set it up in roaming profile.
That means you set the same SSID=Wireless name. Same Security WPA2 AES = WPA2 Personal. Same password. But lock channels on both devices.. make sure each is as far apart as possible.. so for example for 2.4ghz wireless set one to channel 1 and the other to channel 11. For 5ghz similarly set them sufficiently far apart that there can be no overlap. -
Not able to telnet or ssh to outside interface of ASA and Cisco Router
Dear All
Please help me with following question, I have set up testing lab, but still not work.
it is Hub and spoke site to site vpn case, connection between hub and spoke is metro-E, so we are using private ip for outside interface at each site.
Hub -- Juniper SRX
Spoke One - Cisco ASA with version 9.1(5)
spoke two - Cisco router with version 12.3
site to site vpn has been successful established. Customer would like to telnet/ssh to spoke's outside ip from Hub(using Hub's outside interface as source for telnet/ssh), or vise versa. Reason for setting up like this is they wants to be able to make configuration change even when site to site vpn is down. Sound like a easy job to do, I tried for a long time, search this forum and google too, but still not work.
Now I can successfully telnet/ssh to Hub SRX's outside interface from spoke (ASA has no telnet/ssh client, tested using Cisco router).
Anyone has ever done it before, please help to share your exp. Does Cisco ASA or router even support it?
When I tested it, of cause site to site vpn still up and running.
Thanks
YKHello YK,
On this case on the ASA, you should have the following:
CConfiguring Management Access Over a VPN Tunnel
If your VPN tunnel terminates on one interface, but you want to manage the ASA by accessing a different interface, you can identify that interface as a management-access interface. For example, if you enter the ASA from the outside interface, this feature lets you connect to the inside interface using ASDM, SSH, Telnet, or SNMP; or you can ping the inside interface when entering from the outside interface. Management access is available via the following VPN tunnel types: IPsec clients, IPsec LAN-to-LAN, and the AnyConnect SSL VPN client.
To specify an interface as a mangement-only interface, enter the following command:
hostname(config)# management access management_interface
where management_interface specifies the name of the management interface you want to access when entering the security appliance from another interface.
You can define only one management-access interface
Also make sure you have the pertinent configuration for SSH, telnet, ASDM and SNMP(if required), for a quick test you can enable on your lab Test:
SSH
- ssh 0 0 outside
- aaa authentication ssh console LOCAL
- Make sure you have a default RSA key, or create a new one either ways, with this command:
*crypto key generate rsa modulus 2048
Telnet
- telnet 0 0 outside
- aaa authentication telnet console LOCAL
Afterwards, if this works you can define the subnets that should be permitted.
On the router:
!--- Step 1: Configure the hostname if you have not previously done so.
hostname Router
!--- aaa new-model causes the local username and password on the router
!--- to be used in the absence of other AAA statements.
aaa new-model
username cisco password 0 cisco
!--- Step 2: Configure the router's DNS domain.
ip domain-name yourdomain.com
!--- Step 3: Generate an SSH key to be used with SSH.
crypto key generate rsa
ip ssh time-out 60
ip ssh authentication-retries 3
!--- Step 4: By default the vtys' transport is Telnet. In this case,
!--- Telnet and SSH is supported with transport input all
line vty 0 4
transport input All
*!--- Instead of aaa new-model, the login local command may be used.
no aaa new-model
line vty 0 4
login local
Let me know how it works out!
Please don't forget to Rate and mark as correct the helpful Post!
David Castro,
Regards,
Maybe you are looking for
-
Set up the Organizational structure for MSS scenario
Hi! I would like to set up the Organizational structure for MSS scenario within SAP Portal. Question: 1) How to set up/map real user from SU01 to Manager? (tcode, report) 2) How to mark them as 'Chief' (tcode, report) 3) How to be sure that PA & OM a
-
I cannot set up a blue tooth connection between my apple ipod and phone
I cannot set up a bluetooth connection between my apple ipod touch and an external speaker wirelessly. The speaker is a boombar and although I have been able to set it up successfully between the speaker and my iphone, I have not been able to set it
-
Oracle 10g - Not able to connect to the Database
I could not connect to the Database. I found below error when I have run the lsnrctl start I would appreciate any help. D:\Documents and Settings\Administrator>lsnrctl start LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 03-JUN-2010 0
-
Getting a dataprovider object QUERY property with JavaScript
Hi, I'm trying to get the QUERY property of a DataProvider Object, but can't seem to get it. Can anyone tell me if this code is ok? Thanks! <object> <param name="OWNER" value="SAP_BW"/> <param name="CMD" value="SET_DATA_PROVIDER"/> <param name="NAME"
-
CMS 5 doesn't detect my Zen Microph
I had Creative Media Source 3 and I decided to upgrade it finally. So I upgraded and now I have Creative Media Source 5. It didn't detect my Zen Microphoto so I went to the website and upgraded the firmware on the Zen Microphoto to see if it made any