If I resize the Standard form the userdefined field get disturd

Hi Experts,
If i re size the standard form the user defined fields get disturb. Is there any solution for this issue?
-Regards
Vikas

Hi Vikas,
You can capture the resize event and reposition/redimension your items according to a reference item (usually the recommended approach).
Please note that B1 attempts to reposition the items automatically so some items might not need you to adjust them.
Good luck.
Best regards,
Pedro Magueija

Similar Messages

  • In the smartform how to change the company adress in the standard form

    Dear experts,
    In the smartform how to change the company adress in the standard form.
    Regards,
    Balakrishna R.V

    Hi,
    Go through this link below:
    change in SAP Standard Address
    Hope it helps
    Regards
    Mansi

  • Standard prgram and the standard form for the AR Bill of Exchange

    I need to configure AR Program for Bank bills and Bill of Exchange. This configuration is for France.
    Can you let me knoe the standard prgram and the standard form for the same.
    Regards,
    Senthil

    Hello,
    You can refer to the below sap help link whcih describes about the Bill of exchange understanding in sap
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/FIBP/FI-AP-AP-BE.pdf
    http://help.sap.com/saphelp_45b/helpdata/de/e8/f0c10a0a6911d294f200a0c929f4c9/frameset.htm
    Alternatively you can also check the customizing settings for the BOE which details on the settings needed foractivating of BOE
    hope this helps
    regards,
    radhika

  • Customize the standard form is WebDynpro ESS (ess~lea)

    Hi,
    I want to customize the standard form is WebDynpro ESS (ess~lea) Leave Request for Infotype2001 subtype 9990 in NW04. What are the steps and best practices?
    Regards
    Ali

    Hi
    Please see SPRO->Personnel Management->Employee Self-Service->Service-Specific Settings->Working Time->Layout of Web Application->Define Field Selection.
    Regards
    kk.

  • Comiling the standard form gives errors

    Hi,
    When I open the standard form APXPMTCH.fmb in forms builder and compile, I receive the below error.
    "identifier AP_AMT_MATCH_PKH.AP_AMT_MATCH must be declared"
    when I looked for this procedure it exists in the instance. I am not sure what is causing this error? Are the number of parameters or parameters types changes if we open the form in form builders in this procedure call?
    Thanks,
    HC

    Please post the details of the application release, database version, OS, forms version.
    Have you completed the steps in this thread? -- URGENT: Forms 6i error
    Can you reproduce the issue when you open other form (for example, TEMPLATE.fmb)?
    Thanks,
    Hussein

  • Projects, is the Standard Functionality the one with COGS created?

    Korean Air manufactures AIRCRAFT components and delivers them to customers such as Boeing. It wants to implement ERP (R12) applying Oracle Projects Solution.
    Issue
    1. When Shipping Type Deliverable is created in Project Module and it is interface to Shipping Execution for Ship Confirm, COGS(Cost of Goods Sold ) for Shipping Item is created and it overlaps with cost of sales per Project/Task.
    Question
    *1. **When Shipping was done using deliverable of Shipping Type in Project Module, is the Standard Functionality the one with COGS created?*
    A. If the number 1 case is Standard Functionality, is there any option to prevent COGS creation?
    B. If the answer is no, by what kind of setup is it possible?
    C. Does Shipping of Project Module based on “non-asset based warehouse”?
    *2. What is the Integration mapping of Project Management, Shipping Execution, Inventory, AR, COGS etc?*
    The following are basic process.
    1. Quotation-> Contract -> Plan -> Production -> Delivery -> Revenue
    A. Using Deliverable in Projects
    2. Project: Agreement
    3. Task: Unit
    4. Purchasing Plan, Production Plan etc. executed based on Project/Task
    5. Cost calculation is calculated in Project/Task unit
    6. When Task (Tail Number) is completed, deliver to Boeing according to contract
    B. Interface through Shipping Execution
    C. Ship Confirm
    7. Based on cost revenue is recognized according to progression rate.
    A. Cost Collect
    B. Generate Draft Revenue
    8. Based on delivery or contract, account receivable is created and send to customer.
    A. Create Event per Task
    B. Generate Draft Revenue
    C. Interface Draft Revenue to Receivables.

    Hello Daniel,
    The PCI serial cards are not supported with LabVIEW RT for ETS targets and are not expected to work. We are looking into finding a way to add support for PCI serial devices in RT, but currently that support does not exist.
    One possible workaround would be to use a NI ENET-485-X device. The visa resource name will not be COMx in this case. Instead, you will need to enter the long name of ASRL::::::INSTR as documented in the NI-VISA help.
    I hope this helps. If you need to speak with your sales representative to resolve this issue, please follow this link. Have a great day.
    Regards,
    Kristi H
    National InstrumentsMessage Edited by Support on 01-18-2005 08:24 AM

  • Master details form: in the details form the List of values is not working

    The master details have an upper form and a lower form OK
    So, the List of values of values in the upper is working fine,
    the lower form or the details form the list of values not working on it and the code is right, and mean not working like when you press on it its not showing any thing
    also is work on a regular form like a tabular form .
    so please help !!!
    Edited by: user8925579 on May 12, 2011 2:28 PM
    Edited by: user8925579 on May 12, 2011 2:37 PM
    Edited by: user8925579 on May 12, 2011 2:37 PM

    SOLVED
         CMC -> Connections
    -     Right click connection name, Click u201CTools > Check Relationshipu201D
    -     In u201CQuery Resultsu201D, Right click Connections, Click u201CUser Securityu201D
    -     Assign Security for u201CEveryoneu201D
    -     UNTICK both Inherit from Parent Folder and Inherit from Parent Group
    -     Assign u201CView on Demandu201D
         CMC -> Universes
    -     Right click u201CUniversesu201D folder, click u201CPropertiesu201D
    -     Under u201CUser Securityu201D, click Everyone and assign security
    -     UNTICK both Inherit from Parent Folder and Inherit from Parent Group
    -     Assign u201CView on Demandu201D

  • WDR_TEST_ADOBE in that ZCI version2  in the adobe form the submit button is

    hi,
    When i inserting  the webdynpro script it's getting the error.
    and also i chekced the wd application WDR_TEST_ADOBE in that ZCI version2  in the adobe form the submit button is not trigerring.. that indicates ome thing i have to install in my system...
    Please tell me what i have to install... i instaleed ADLC.....
    How can i execute the application.
    Thanks

    Hi Thomas,
    I checked with my basis team they are telling that ADS installed in java stack and configured the same.
    but still, WDR_TEST_ADOBE  in that ZCI version2 in that form button action was not trigerring.I clicked the edit button enterd the values in the fields and then clicked the button.
    can you please help me in the same.....
    Thanks
    Rams

  • I want to store the data form the PWM and the value of the changing duty cycle into a file simultaneously and continually

    i want to store the data form the PWM and the value of the changing duty cycle into a file simultaneously and continually but having problem.Please can anyone help out.
    Attachments:
    data.vi ‏60 KB

    Hello,
    Have you looked at the "Write Binary File.vi" and "Read Binary File.vi" examples?
    They give you a good clue as how to write and read arrays to and from binary files.
    For your data it means that you could put the two data items to write in an array and write the array to file, for the read its important to in what sequence the number were written to file.
    Kind regards,
    André
    Regards,
    André
    Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

  • I have  an iphon 4 got the new ios 7 and I need to redo my icloud but I dont have the password for it and apple does not have the infromation form the old account what should I do to turn off find my iphone

    I have  an iphon 4 got the new ios 7 and I need to redo my icloud but I dont have the password for it and apple does not have the infromation form the old account what should I do to turn off find my iphone

    To to http://iforgot.apple.com and sign in with your iCloud ID. A new password will be sent to the associated email address.
    It this doesn't work, go to https://getsupport.apple.com ; click 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'.

  • How do you turn off the suggestions form the google search bar?

    How do you turn off the suggestions form the google search bar? the drop down boxes are really starting to annoy me!

    You can't turn off the suggestions in Safari, though you may be able to do that if you install Glims, which also offers some additional options that aren't available directly in Safari.
    Quit Safari before you install it, then restart and go to Preferences>Glims to setup your options.
    As for drop-down boxes, what exactly are you referring to?

  • SAP Cloud For Customer : How to change the Logo or Image into the Standard Form Template

    Hi Experts,
    I have requirement to change the standard template format.
    I have copy standard template and edit using Adobe Life Cycle Designer to change the logo / image.
    After changed and upload modified template and change the output setting for print i can able to see the changes but logo / image can not display.
    Can anyone have idea how to solve this issue ?
    Can we change the template within cloud system?
    If Yes than How ?
    Regards,
    Mithun

    The following are the instructions (November 2014 version of SAP Cloud for Customer)
    Edit a Form Master Template
    Overview
    As an administrator, you can edit existing form master templates. These are used to define the header, footer, and logos used in form templates. Form master templates also contain an e-mail disclaimer that is appended to automatically generated e-mails sent to business partners when a document is output from the system.
    Procedure
    1. Go to Application and User Management or Administrator Business Flexibility Master Template Maintenance .
    2. In the Master Template Maintenance view, select Form Master Templates from the Show menu.
    3. Select the master template you want to edit and click Edit.
    4. On the Form Master Template tab, do the following:
    Under Header, click Upload and browse to find the file you want as logo. Adjust the size and alignment of the logo, as required.The file formats .gif, .bmp, .jpg, .png, and .tif are supported. The logo should not be larger than 40 mm width x 20 mm height. If you upload a graphic that is larger than 40 mm x 20 mm, it is resized automatically.Select the Header Divider checkbox if you want a graphical divider to appear on your form.Under Sender Address, enter your company’s address. The sender address is shown above the recipient's address in a letter.Under Footer, choose the number of footer columns you want to display. Enter the footer text exactly as you would like it to appear on the form. You can maintain up to 4 footer blocks with a maximum of 10 lines per footer.Note that the width of each footer block is equally divided over the available space. If a line of text in the footer is too long for the current font size, the system will automatically enter a line break. If this automatic line break does not meet your needs, you may need to enter the text after the line break as a separate line.To maintain multiple languages, you must first add the language from the Add menu and then maintain the texts in that language by selecting the language from the dropdown list.
    5. Click the refresh button to preview your changes. From the dropdown list under Preview, you can select a country. The preview is then displayed using the country-specific template, for example, some countries do not use sender addresses or have different paper sizes.
    6. On the E-Mail Disclaimer tab, you can enter a disclaimer or other company-specific legal information.
    This text is appended to the main text body of e-mails that are created when a document is output by the system. It is not possible to create separate language versions of this text; therefore if your company uses multiple communication languages, you should enter all language versions of the disclaimer here.
    7. Click Save and Close.
    Result
    If required, you can now assign the form master template to a company/org unit and/or output channel. For more information, see the Master Template Maintenance Quick Guide.
    Note that master templates can be activated and deactivated for each form template in the Form Template Maintenance view. For more information, see the Form Template Maintenance Quick Guide.

  • Count and Names of the Standard Forms used in financial Module

    Hi gurus,
    Kindly help us to list the form names and count for each financial module (*Excluding Setup Forms*)
    Also please suggest how to count the number of OAF pages for each financial Module.
    Any Query to find this?
    This is needed for estimatation purpose.
    Thanks,
    Vidhu

    1) i want to know what kind of forms do you use from SD point of view.?
       SD point of view :
       1. Quotation layout
       2. order confirmation
       3.delivery
       4. Packing list
       5. Invoice
       6 Invoice List
       7 Bill of lading(Shippment)
    2) are they Modified forms or standard forms?
       Always we used modify when it requires,99% we don't use SAP Standard form since layout design not good,we design properly
    3) can you provide the list of forms that sd people use and how are they modified
        You can get everthing in NACE Transaction.
    GOTO NACE Transaction -> select V1 Application -> click on output type -> select output type BA00(Order confirmation) -> click on processing routine.
    here you will be able to see form name and programs.
    same thing you can select V2,V3 .
    Thanks
    Seshu

  • On the interactive form - the filter icon

    I have a user that has a dumb question, they want to the filter to go away they selected when they come back to the first page of the interactive form, when there is no data left.
    Of course all they have to do is click the x to make the filter list appear. The reason it says no data when you go back to the first form is that that records no longer meets the criteria for the filter. The user wants the filter with the green check and the red x to disapear if there is no data left for that filter.
    Hope this makes sense.

    Hi -
    Two things you might want to look at are:
    1) To reset an interactive report in a link, use the string "RIR" in the Clear-Cache section of a URL. This is equivalent to the end user choosing the Reset option from the interactive report actions menu on the target page. The report is returned to the default report settings specified by the developer.
    or
    2) You can reset a report with a js call also: javascript:gReport.reset()
    Good luck.

  • How to enhance the standard search with custom field?

    Hi all,
    I would like to know the general optimal procedure to enhance the standard searches like Opportunity search or Lead search.
    I've gone through some of the threads here. Some suggest, to add the new field using AET and copy the IMPL class of the search and then code the custom logic. Some say, append the new field to the structure of the search object and then implement the BADI.
    I'm actually a bit confused to understand the correct procedure.
    Can someone please help me with a generic procedure to enhance the standard search with a custom field?
    Thanks in advance.

    Hi Maren,
    Once I have got the same development. I have followed the below steps, please check with this. Let me know for further inputs.
      Add new field using Append structure of type ‘XXX’ in search
      Create BADI implementation for Enhancement spot ‘ES_CRM_RF_Q1O_SEARCH’ and include filter ‘BTQOPP’
      Put your logic in BADI implementation – SEARCH method
      Add it in WebUI configuration
      Remove the operator if required
    Regards,
    Swadini Sujanaranjan

Maybe you are looking for