If the offline tablespace will be backuped when I issue the BACKUP DATABASE
will the offline tablespace be backuped if I issue the BACKUP DATABASE command?------No.148
Message was edited by:
frank.qian
Simple answer is yes. Use the SKIP OFFLINE to skip offline tablespaces.
sys@ORCL> create tablespace test datafile 'c:\oracle\product\10.2.0\oradata\orcl\test01.dbf' size 100m autoextend on
2 extent management local uniform size 1m;
Tablespace created.
Elapsed: 00:00:06.96
sys@ORCL> alter tablespace test offline;
Tablespace altered.
Elapsed: 00:00:02.54
sys@ORCL> select tablespace_name, status from dba_tablespaces;
TABLESPACE_NAME STATUS
SYSTEM ONLINE
UNDOTBS1 ONLINE
SYSAUX ONLINE
TEMP ONLINE
USERS ONLINE
EXAMPLE ONLINE
TEST OFFLINE
7 rows selected.
Elapsed: 00:00:00.01
sys@ORCL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
c:\sql>rman
Recovery Manager: Release 10.2.0.2.0 - Production on Mon Jan 15 11:40:06 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> connect target /
connected to target database: ORCL (DBID=1133000557)
RMAN> backup database;
Starting backup at 15-JAN-07
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=159 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF
input datafile fno=00002 name=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF
input datafile fno=00003 name=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF
input datafile fno=00005 name=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\EXAMPLE01.DBF
input datafile fno=00006 name=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\TEST01.DBF
input datafile fno=00004 name=C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF
channel ORA_DISK_1: starting piece 1 at 15-JAN-07
channel ORA_DISK_1: finished piece 1 at 15-JAN-07
piece handle=C:\ORACLE\PRODUCT\10.2.0\ORADATA\BACKUP\0AI7IGP2_1_1 tag=TAG20070115T114018 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:01:15
Finished backup at 15-JAN-07
Starting Control File and SPFILE Autobackup at 15-JAN-07
piece handle=C:\ORACLE\PRODUCT\10.2.0\ORADATA\BACKUP\C-1133000557-20070115-02 comment=NONE
Finished Control File and SPFILE Autobackup at 15-JAN-07
RMAN>
Similar Messages
-
Doe's anyone know what could be the problem?
Please be more specific about what you are doing. Please describe your steps, your browser, and your OS.
-
help
my iphone has been stolen i did the auto erase online but my phone is offline pending erase i cant bare to think someone has acces to my phots and pictures. how will i know when the erase has been succesfulThank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone -
Offline Tablespace Backup?
Please let me know how to take Backup of Offline Tablespace?
I will be very thankful to all of youIf the tablespace is already in offline mode, then just copy the datafiles of that tablespace to your backup destination. When ever you want to restore it, Just copy the datafiles of the tablespace to the location it is to be restored and then make it online. The checkpoint will start and it will synchronise all the datafile headers and controlfile with the CKPT info.
Why would you require to backup an offline tablespace regularly? It just needs to be backed up once.
Regards,
Sanju -
The Consequences of putting a tablespace into Hot Backup mode--Link to Doc
http://www.dizwell.com/prod/node/10
This article will help beginners who want to know what exactly happens when the Tablespace is put in Backup modeGood point.
If we only know Enterprise Manager, we will be stuck when confronted with a telnet session. In like manner, if we only know RMAN, we will never know half of why it is so useful and efficient.
Besides which, there is a lot of use for manual recovery techniques, even in a world of RMAN doing all the backups, so knowing the entire backup/recovery universe is a Good Thing. -
Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand. I also cannot attach any of these pics into an e-mail or into any other file. I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild. Any Help?! Any Suggestions on how to fix this?! I have spent almost 2 days now going through all of the published help.
I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database -- if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
LN -
Oracle 10G Non-Network install - OEM will not start when on the LAN.
Greetings,
Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
===========================================================
IP_address hostname.domainname hostname
where:
IP_address is the non-routable IP address you entered for the loopback adapter.
hostname is the name of the computer.
domainname is the name of the domain.
For example:
10.10.10.10 mycomputer.mydomain.com mycomputer
==========================================================
In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.110.250 IBM-6AB1330E158
==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
IP_address hostname.domainname
- not -
IP_address hostname.domainname hostname
Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
Thanks in Advance for any help,
ADG13I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
fwiw,
ADG13
C:\Documents and Settings\Administrator>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : IBM-6AB1330E158
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ibm.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.110.250
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
Physical Address. . . . . . . . . : 00-11-25-13-96-AF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 65.24.7.3
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
Ethernet adapter AGN Virtual Network Adapter:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . : AGN Virtual Network Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-01
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 9.49.217.159
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 9.49.217.159
DNS Servers . . . . . . . . . . . : 9.0.2.1
9.0.3.1
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM -
IPhone will not sync when Windows Vista laptop is offline
Hi there. My iPhone 3GS syncs OK when my Laptop has a wireless connection to the internet but if it is offline, itunes will not recognise my iPhone. It shows up in 'My Computer' as a Mobile device. I have deleted and reinstalled iTunes and quickTime and I have all the latest software.
When I make sure the driver is correctly linked (by following the guidance and going to C:\program file\common files\apple\mobile device support\drivers it says that the driver software is up to date but says it is for a digital still camera. Please can you help me with this as I am unable to alter my iphone content when I am away (and out of a wireless network).
Thanks, JohnSee http://support.apple.com/kb/TS1538, especiall #1-4 at the bottom.
-
When will BRE [Backup restartable Extensions] be available in Ontap Cluster mode ?
Hi Folks, When will BRE [Backup restartable Extensions] be available in Ontap Cluster mode. With 7-mode there is no issue, we can suspend and restart backup from the checkpoint, however with Ontap cluster mode version 8.3 I am currently running, this is not possible [I guess all versions]. If the Job is suspended in cluster mode, session ID is lost and new session ID is generated when the backup is resumed, in other words data backup starts from begining. Is this something will be available in Onap 8.4 cluster mode ? Thanks,
-AshwinHi, Yeah, you are right - 8.3RC1 is older than 8.3P1.
8.3 Releases:
8.3RC1 ----> old release [I already tested - dump restart does not work]
8.3RC2
8.3
8.3P1 -----> Customer already is on higher update and it still dosent work
8.3P2
8.3.1RC1 ---> Latest release
My confusion has only increased now as far as when this BUG is fixed Or if at all fixed?
http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=1472 According to this BUG, this is already fixed in all versions of 8.3. I am currently running 8.3RC1 Simulator and suspending a Job is causing NDMP session ID to end. In 7-mode: When we suspend a Job from Backup Software, NDMP session ID is not lost and when you run Backup status command, it shows -> State : RESTARTABLEThe key word is 'RESTARTABLE' which dosent seem to work in cluster mode.
The NDMP Backup Restart Extension (BRE) interface is a proprietary extension defined in class 0x2050
According to NDMP.org:
NDMP_BRE_RESTART_BACKUP:
This request is used by the backup application (DMA) to instruct the Data Server to restart a previous backup operation at a specific point in the backup stream. Request arguments include a handle to a previously created backup context, the restart point specified as an absolute offset within the backup stream, and a file history entry corresponding to the restart point.The backup restart mechanism requires that the Data Server generate file history information and that the Data Server implementation of file history generate fh_info values as absolute byte offsets within the backup stream. The backup application determines restart points by accessing the Tape Server NDMP_MOVER_GET_STATE bytes_moved value at appropriate ‘checkpoints’ during the original backup operation. A checkpoint represents a known good point in the backup operation. BRE extensions are bydefault disabled, I enabled by setting it 'true' yet its not working. CMODE83RC1::*> ndmp extensions show
(vserver services ndmp extensions show)Is Extension 0x2050 Enabled: true Thanks,
-Ashwin -
When offline wikipedia will be available? I am waiting for it
When offline wikipedia will be available? I am waiting for it. Its kind of cool to have the whole wikipedia offline on iPhone. Any body know the status?
http://collison.ie/wikipedia-iphone/Apple need digg like application request. Kind of like idea storm. That way, the most needed application will be approved faster. As a result, Apple will have happy customer
-
My iPad2 will sometimes hang when loading an mp4. Gives an error message then attempts to resync which hangs until I unplug the iPad.
I have an iPad 2and have not had any trouble until I up dated my os. I have a pc with win 7. I do not sync since I have so much music on my computer. I synced my apps during the back up but I had to manually reload my music and videos. Since then I turned off all syncs.
Since I have to load all my movies on this has been happening. I get through about 4 movies then it will hang up. I eventually get an error message that it cannot load this movie. I then attempts to close out. This seems to hang. When I attempt to eject the iPad it attempts to sync and that never finishes. I pull the plug and that stops the sync but I have to restart the computer before I plug back in the iPad or it will not recognize it or it will attempt to finish the sync which never ends. It sometimes hangs on something with safari and site protection.
After I restart my computer I can put in 4 or so movies, including the one it hung on before, but it always hangs up again. Any suggestions?I am having an almost identical problem and hoped that iOS 6 and the new iTunes would fix it. Regrettably, I again got 3 movies synced last night before iTunes locked up and gave me the xxxx cannot be synced "because the file cannot be written" message. Same deal with iTunes hanging on "finishing sync" after that and me having to remove the iPad from the cable to get things to come back to life on the PC (Win 7 64 bit).
I've also done a factory restore followed by a restore from backup and have the same problem. -
cannot type the letter "t" when phone is in portrait orientation. will only work when phone is in landscape.This causes some problems as some apps do not change orientation so when the "t" is needed to be entered it cannot be carried out
Try the basic troublshooting steps described in the User Guide, Appendix B: Resart, Reset, Restore using backup, Restore as new.
-
ACTIONS WILL TAKE EFFECT WHEN THIS IPHONE CONNECTS TO THE INTERNET.
when i tryed to locate my iphone from icluod website , it saied "ACTIONS WILL TAKE EFFECT WHEN THIS IPHONE CONNECTS TO THE INTERNET."
1- i have the same id apple
2- find my iphone is on on icloud and location services
3- i've tryed all troubleshooting
4- my iphone is connected to the internet
my iphone is on ios 5.1.1
do i need to upgrade it ti 6 so i can locate my iphone ???
please need help as fast as it possible !
thankyou.im using it ...
it appers my iphone offline and says that
ACTIONS WILL TAKE EFFECT WHEN THIS IPHONE CONNECTS TO THE INTERNET. -
my itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible
i think i might have a solution... i have windows vista and after i installed to latest itunes update everytime i tried to open it it would freeze. I tried everything, including uninstalling itunes and all of its components and reinstalled it numerous times. So i went to the itunes folder in my folders, not on itunes, and i deleted my itunes library and playlists. After that it worked just fine, all of my music was deleted but luckily i had my files saved elsewhere.
I hope this helped! I know its frustrating and APPLE/ITUNES NEED TO FIX THE PROBLEM!!!! -
I am trying to use the locate my macbook that was stolen. How do I know if it is set up on the service. It shows on the list but just says it is offline and doesn't say when or where it last was. I am trying to either locate it or erase it. HELP
Since you can see it in your device list it must have Find My Mac activated, but you're going to have to wait for them to take it online in order to either locate, lock or wipe it. Until it goes online you can't do anything. http://www.apple.com/support/icloud/find-my-device/
iCloud: Locate your device
Maybe you are looking for
-
How do I transfer files from a broken macbook to a macbook air? I have tried connecting USB cables and migration assistant but it won't recognize the broken computer.
-
Profit Center wise Customer Clearing
Dear Sir, There is our client requirement to have profit center wise customer clearing. Kindly suggest. With Regards, Saurabh
-
Change Security Level by the program.
Hello folks. I'm trying on Lookout 6.0.2 to return to the lowest security level 30 minutes later after someone entered a high level security login. I do not want that operators have access inside the computer if the supervisor or the technical person
-
Tabular parallel processing?
hi all, does anyone know if there have been any new enhancements in allowing parallel processing of large fact tables? I know, as of RTM and SP1 and even SSAS2014, that's something that was not able to be technically entertained, AFAIK.... are there
-
I lost all of my calender info and did not have the cloud activated. Any ideas on why that happened? Any idea if I can get that back?