If u cant connect after update 3.0 reboot or unplugit and plug back in
I had an unknown error couldn't connect to itunes emergency calls only, turned my iphone off and restarted connected fine and finished install.
Message was edited by: Robert Beyer
i think i had this same problem, and it's becuase i had 'AIRPORT MODE' turned on when i updated. now it installed everything but is stuck on the 'plug into itunes' screen. when i plug it in, it says "unable to complete itunes store request. -check you network settings" my phone cant connect to the itunes store because its still on airplane mode.
I can't even restore it..
how can I fix this and take it off airplane mode?
pls help thanks!
Similar Messages
-
Time Capsule no longer works after unplugged and plugged back in
See if you can follow this.
When i first got the time capsule about 2 months ago i had problems right off the bat. I changed the WEP to a WPA, plugged the time capsule into the router instead of going wirelessly and used it to extend the network. After several time of reseting the capsule, changing settings and passwords, and waiting several minutes for the airport utility to say it could not connect i finally got it to work.
Now, the other day i went to move my desktop to another outlet, so everything was unplugged via the surge protector, for about 5 minutes then plugged back in. Now the capsule no longer works. I was getting the same messages as two months ago, as if everything was reset in turning it off for a minute. I went through the same processes as last time to get it to work, but not this time. After waiting at the airport page for a few minutes it says that internet connection is the issue. Now the capsule is about 1 foot away from the router and plugged in, and i have internet connection to the desktop and my macbook pro.
Does anyone have any ideas, omitting the stupid suggestions web pages tend to give, such as is it plugged in? is it turned on?
Help is GREATLY appreciated."plugged the time capsule into the router' try bridge mode and also configure its wireless setting
-
After Update to 19.0, Crash Frequently and Plug-in Container Issues
Ever since I updated to FF 19.0, I noticed that FF crash more often than usual, without any reason (I was in the middle of reading a website). And also the plug-in container for Adobe Flash kept consuming high cpu usage, thus slow down or even freeze FF. I have to end it before FF back to normal.
Am I the only one has problem or it's a bug in FF 19 waiting to be fixed?
Any suggestions/comments are much appreciated. Thank you.
PS: No add-on has been added, and I have cleared cache often.We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash ID's to help us learn more about your crash.
#Enter about:crashes in the address bar (that's where you enter your website URL) and press Enter. You should now see a list of submitted crash reports.
#Copy the 5 most recent crash ID's that you see in the crash report window and paste them into your response here.
Thank you for your cooperation!
More information and further troubleshooting steps can be found in the [[Firefox crashes]] article. -
Why won't apple device work anymore? Tried unplugging and plugging back in.
Screen shows disconnected line to I-tunes icon. Is apple device broken for good?Yes, it's possible that anything stops working at some point. Here is the support start page - you can read through the stuff and/or contact support:
http://www.apple.com/support/appletv/
If yours is no longer covered by a warranty, you can also take it to your nearest Genius Bar for a free evaluation. -
iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... -
Both iPod and iPad won't connect after update.
Both iPod and iPad won't connect after update. iTunes says "can't allocate a resource"
I had the same problem after updating to iOS 7 today. I did follow the advice on another site, but additionally rebooted my iMac. Worked after that.
Follow these steps to reset the Lockdown folder:
Disconnect all iOS devices from your computer and quit iTunes.
From the Finder, choose Go > Go to folder.
Type the following and then press Return:
/var/db/lockdown.
The Finder window should display one or more files with long alphanumeric file names.
In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted.
Note: Do not delete the Lockdown folder itself. Delete only the files contained inside the Lockdown folder.
Reconnect your iOS device and open iTunes
My Additional step: reboot the Mac. Your iPad should give the first indication that it has worked by asking you to "trust this computer" or some such. Agree. Then iTunes should have reopened with your iPad showing and syncing. -
Wi-fi won't connect after updating to iOS5
wi-fi wont connect after updating to iOS5
This is what worked for me:
1. In wireless settings, select your router and then selet "forget this network."
2. Turn wireless off.
3. Hard restart the phone (press power switch and main button simultaneously, hold them until the phone turns off.
4. Reboot your router, preferably unplug the power cord completely.
5. After your router is up and running, turn wireless back on, select your network, then enter your password.
For me, the fix was immediate. I hope it works for you! -
"HT4199: iOS and OS X: Recommended settings for Wi-Fi routers and access points"
this still didn't fix iPad connectivity after updating to iOS 6.0.1 !!! intermittent wi-fi connection, even with a direct line-of-sight to the router.Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
TS1398 I have problems with my wifi connection after update the ios6 any advice
I have problems with my wifi connection after update the ios6 any advice
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I have problems with my wifi connection after update the ios6 any advice
I have problems with my wifi connection after update the ios6 any advice
Ask your question in an iPAD forum.
This is the OS X Mountain Lion forum. -
My Ipad has frozen after updating, it has the itunes emblem and a usb cord image on the screen, what do I have to do to get it working again?
You need to start the latest version of itunes on your computer and connect your iPad in order to restore it.
-
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
-
After updating to v. 24.0 (and restarting, several times) ALL add-ons (regardless whether they work or not) are marked "(disabled)". I tried clicking "Enable" button for each add-on and nothing happened. There is only one add-on which is marked as incompatible with this version (but it was also incompatible with previous version, and so marked).
Clicking "Update Add-ons", gives a short list of add-ons but "Install Updates" button is pale and doesn't work. I can only sort list by name or last update.
Also, I disabled Ask Toolbar and that went well. When I click "Enable" button (button works ONLY for this add-on) it takes forever to get note: “Ask Toolbar will be enabled after you restart Firefox”, I used to get this info in seconds time before this update. (I do not really want Ask Toolbar, I just used it to see whether if I disable and then enable an add-on might do the trick.)
Bottom line – I can not tell if add-on works (i.e. if it is enabled or disabled) unless I try using it.
Even when I posted this question and installed Troubleshooter, it's also marked as "(disabled)"You're welcome
Are this screenshots from an extension window because the built-in about:addons page looks different? -
I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.
I have tried everything and nothing works.sound problems:
#Restore speaker icon to System Task bar, right-click on clock or tray > Properties > Volume: On
#Click on the Sound icon in System tray then on Mixer, make sure Firefox is not muted [http://dmcritchie.mvps.org/icons/fx_sound.png picture]
<p>Additional references
* [https://support.mozilla.com/en-US/kb/No%20sound%20in%20Firefox No sound in Firefox | Troubleshooting | Firefox Help]
* [http://support.mozilla.com/en-US/kb/Video%20or%20audio%20does%20not%20play Video or audio does not play | Troubleshooting | Firefox Help]
* [http://kb.mozillazine.org/Video_or_audio_does_not_play Video or audio does not play - MozillaZine Knowledge Base] -
After Updating to Mavericks my Outlook contacts and folders disappeared - How do I recover them?
After Updating to Mavericks my Outlook folders and contacts disappeared - how do I recover them? Thank you!
It's possible Outlook opened in a new Identity.
In the Finder go to your Documents folder > Microsoft User Data folder > Office 2011 Identities folder.
Inside you should see your Identity. You might see other Identities from prior rebuilds. If Outlook opened in a new blank Identity you can open the Database Utility to set your old Identity as default.
Options to check in the Identity to determine if it has data.
Check the database file in the Identity to see when it was created and modified.
Check the Data Records folder to see if it has these folders:
Message Attachments
Message Sources
Messages
If these folders are missing there are no messages.
Open the Database Utility
Hold down the Option key when launching Outlook. It will open the Database Utility.
Click on the + to add a new Identity.
Click on the gear to set default Identity.
Another option to open the Database Utility is to open from Applications.
/Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
Maybe you are looking for
-
Erratic iSight problem on MacBook Pro
The iSight camera on my MacBook Pro 17" comes and goes constantly. It vanishes from System Profiler at times too. I've rest the NVRAM and logged in as other users too. Its like it has a mind of its own. Turning on the green LED and off, then refusing
-
I recently installed LR 5.3 on a new computer running Windows 8.1. Am using the Epson R2880 printer. All drivers etc are up to date. Any print or print preview using any ICC profiles has a very decided reddish/pinkish (or possibly magenta) color shif
-
Latest documents are not displayed while searching the Leads in WebUI
HI, I am trying to search the leads in WebUi Search screen. However, always it is displaying the old Leads rather than newly created ones. For my case: I should always display the latest leads by sorting them with "Start date - Descending". Could you
-
what is the difference between the sports edition apple watch and the normal edition, is it the bands different or do the they have different apps. Also could you take the bands off and put new ones on(change the bands)?
-
Stop user from cliking back button after logging out
How can I stop the user from clicking the back when they had clicked the log out link...? <%@ page language="java" %> <html> <head> <title></title> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> </head> <body> </body> <script lan