IFS-30027: Insufficient access to create a SchemaObject

I receive the following error when I to parse a XML file. IFS-
21005 indicates, I need administrator mode. What I want know is
this misleading and I just need to modify the ACL or does the
administrator need grant a higher level of access?
oracle.ifs.common.IfsException: IFS-30002: Unable to create new
LibraryObject oracle.ifs.common.IfsException: IFS-30027:
Insufficient access to create a SchemaObject
oracle.ifs.common.IfsException: IFS-21005: Administrator mode is
required for this operation
Thanks,
Art

If the XML file you are uploading is specifying the creation of a
SchemaObject (e.g. a ClassObject, ValueDomain, ClassDomain, or
ValueDefault), the session must be in admin mode. There is no
way to circumvent this by changing an ACL.
regards,
dave

Similar Messages

Ecm11g sitestudio:insufficient access to contributor mode

hi All,
I am new comer for wcm, I am using ecm11.1.1.4 sitestudio on winxp, I enabled sitestudio,ssxa, sitestudio publisher components, I updated jdev11.1.1.4 with zip file under Oracle_ECM1\ucm\Distribution, I followed the steps in http://download.oracle.com/docs/cd/E17904_01/doc.1111/e13650/ssxa_creatingsites.htm, while when I came to the step of the following:
3.2.12 Adding a Placeholder to the Home Page
15.Click the Switch Placeholder Definition Role value, and select the admin security role from the drop-down list.
In this step, I can't find "Switch Placeholder Definition Role" in my SiteStudioDemo.xml, so I jumped over this step, but when I run the startSiteStudioDemo.jspx, press ctrl+shift+F5, login with weblogic/weblogic1, IE displayed an error message showing insufficient access to create placeholder, the wls startup console showed the following message:
================
intradoc.common.ServiceException: !csUserInsufficientAccess,weblogic
at intradoc.server.ServiceRequestImplementor.buildServiceException(Servi
ceRequestImplementor.java:2115)
at intradoc.server.Service.buildServiceException(Service.java:2260)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
at intradoc.server.ServiceSecurityImplementor.validateSecurityPrivilegeL
evel(ServiceSecurityImplementor.java:813)
at intradoc.server.ServiceSecurityImplementor.globalSecurityCheck(Servic
eSecurityImplementor.java:364)
at intradoc.upload.UploadSecurityImplementor.globalSecurityCheck(UploadS
ecurityImplementor.java:57)
at intradoc.server.Service.globalSecurityCheck(Service.java:2671)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImp
lementor.java:678)
at intradoc.server.Service.doRequest(Service.java:1890)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435
at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:2
65)
at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
==========================
Since I didn't finish step 3.2.12.15 mentioned above, I doubt that was the reason for the issue, the point is why I couldn't see "Switch Placeholder Definition Role" when I edited SiteStudioDemo.xml?
Best regards

Hi Srinath,
Thank you very much for your answer.
To be sure, the issue is the following :
[localhost oracle /u01/app/oracle/product/Middleware/user_projects/domains/webcenter/bin]$ <Jan 27, 2012 6:47:16 AM PST> <Error> <HTTP> <BEA-101020> <[ServletContext@24412361[app:pocIaEnterpriseApplication module:pocIA-Project1-context-root path:/pocIA-Project1-context-root spec-version:2.5]] Servlet failed with Exception
java.lang.IllegalArgumentException: The file weblogic.jsp.wlw.util.filesystem.mds.MDSFile@1da7214 is not a source file
at weblogic.jsp.internal.CPL.addSourceFile(CPL.java:632)
at weblogic.jsp.internal.CPL.addSourceFiles(CPL.java:616)
at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:140)
at weblogic.servlet.jsp.ResourceProviderJavelinxJspStub.compilePage(ResourceProviderJavelinxJspStub.java:78)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:256)
Truncated. see log file for complete stacktrace
>
<Jan 27, 2012 6:47:16 AM PST> <Notice> <Diagnostics> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'SSXA_server1' has triggered at Jan 27, 2012 6:47:16 AM PST. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'WL-101020') OR (MSGID = 'WL-101017') OR (MSGID = 'WL-000802') OR (MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = Jan 27, 2012 6:47:16 AM PST SERVER = SSXA_server1 MESSAGE = [ServletContext@24412361[app:pocIaEnterpriseApplication module:pocIA-Project1-context-root path:/pocIA-Project1-context-root spec-version:2.5]] Servlet failed with Exception
java.lang.IllegalArgumentException: The file weblogic.jsp.wlw.util.filesystem.mds.MDSFile@1da7214 is not a source file
at weblogic.jsp.internal.CPL.addSourceFile(CPL.java:632)
at weblogic.jsp.internal.CPL.addSourceFiles(CPL.java:616)
at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:140)
at weblogic.servlet.jsp.ResourceProviderJavelinxJspStub.compilePage(ResourceProviderJavelinxJspStub.java:78)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:256)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:216)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:243)
at weblogic.servlet.jsp.ResourceProviderJspStub.execute(ResourceProviderJspStub.java:59)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
As JP says, I have followed the official tutorial and some configurations seem to be obsolete because I can't find it in JDeveloper.
Do you know if Oracle will publish an updated tutorial ?
Thank you,
Romain.
Edited by: 910491 on 27 janv. 2012 06:43

Error while configuring SSL in OID 11g - LDAP 50 Insufficient Access rights

HI,
I am trying to configure SSL in OID 11g.As per the doc http://download.oracle.com/docs/cd/E12839_01/oid.1111/e10029/ssl.htm#CBHGBGAF ,i tried creating a Self-Signed Wallte using Fusion Middleware control,But i am getting an error LDAP 50: Insufficient access rights".I logged into Fusion Middle Ware control as Weblogic user.Is anybody faced this issue?.Thanks in advance.

I am not sure how you tried, but I would recommend to do the following...
1. Add the 'user1' to "OU=Franchisees,ou=People,dc=company,dc=com"
2. Delete the 'user1' from 'OU=Internal,ou=People,dc=company,dc=com'

Insufficient privileges while creating EUL

Hi All,
I am trying to create a new EUL in Discoverer 9.0.4. Option "Select an existing user" is selected and "Grant access to Public" is unchecked.
I am connected as user A. The tables are in schema for user B. So I selected the user B and entered the password. When I click "Finish", I get the following error:
Insufficient privileges to create a new user or grant the necessary privileges to an existing user. You must have CREATE USER, ALTER USER and GRANT ANY PRIVILEGE privileges.
Now user A does have privileges to create role, view, table, session, sequence, procedure. User B too has these privileges plus a few more.
Can somebody help me with what privileges am I lacking? For which user, A or B?
Thanks.

If you want to create an EUL the user you select (B in your case) must be the following privilegies:
CREATE SESSION
CREATE USER
GRANT ANY PRIVILEGE
ALTER USER
It doesn't matter the user you are connected in Discoverer.
Hope this helps.

Orcladmin: "Insufficient access right to perform action" using oidadmin

After sucessfully installing OID from 8.1.7 CD on Sun Solaris 8
(SPARC) I can start the monitor and the oidldap. After
sucessfully connecting with orcladmin using oidadmin I always get
the same error (either using oidadmin on windows or solaris) when
accessing "entry management", "schema management" or "audit log
management":
Insufficient access right to perform action.
but the default ACP allows everyone (browse add delete)
anyone else had the same problem?
I tried to create the name server with OID with netca which
obviously does not work either.

Hi Christian:
You say that you conencted to OID as "oidadmin". Since OID does
not have any user account called "oidadmin" you were probably
conencted as an anonymous user. If you are trying to connect as
the administrator of OID the correct user account name is
"orcladmin" with a default password of welcome. Try this and let
me know if you sitll have troubles.
Thanks,
Jay Tomlinson

Insufficient permissions to create node on Note component

Hi team,
I am creating a simple chat app in LCCS. Our guest have role of 50 and we are using knocking feature. I have added all the components and they work fine for both the guest and host except for notes component. When we have notes component in the code when the guests comes in (before the acceptance in the queue) , we get following exception. We can just dismiss the exception and everything works fine. Why are we getting the exception?. Here is the stack trace,
Error: MessageManager.createNode : insufficient permissions to create node
    atcom.adobe.rtc.messaging.manager::MessageManager/http://www.adobe.com/2006/connect/cocomo/messaging/internal::createNode()[/Users/arun/Work /aponnusa_theoden.corp.adobe.com_1666/depot/branches/connect/1010/cocomoPlayer10.1/src/com /adobe/rtc/messaging/manager/MessageManager.as:273]
    atcom.adobe.rtc.sharedModel::CollectionNode/createNode()[/Users/arun/Work/aponnusa_theode n.corp.adobe.com_1666/depot/branches/connect/1010/cocomoPlayer10.1/src/com/adobe/rtc/share dModel/CollectionNode.as:379]
    atcom.adobe.rtc.sharedModel::SharedProperty/onSynchronizationChange()[/Users/arun/Work/ap onnusa_theoden.corp.adobe.com_1666/depot/branches/connect/1010/cocomoPlayer10.1/src/com/ad obe/rtc/sharedModel/SharedProperty.as:571]
    atflash.events::EventDispatcher/dispatchEventFunction()
    atflash.events::EventDispatcher/dispatchEvent()
    atcom.adobe.rtc.sharedModel::CollectionNode/http://www.adobe.com/2006/connect/cocomo/messaging/internal::setIsSynchronized()[/Users/ar un/Work/aponnusa_theoden.corp.adobe.com_1666/depot/branches/connect/1010/cocomoPlayer10.1/ src/com/adobe/rtc/sharedModel/CollectionNode.as:700]
    atcom.adobe.rtc.messaging.manager::MessageManager/receiveAllSynchData()[/Users/arun/Work/ aponnusa_theoden.corp.adobe.com_1666/depot/branches/connect/1010/cocomoPlayer10.1/src/com/ adobe/rtc/messaging/manager/MessageManager.as:871]
    atcom.adobe.rtc.messaging.manager::MessageManager/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveItems()[/Users/arun/Wo rk/aponnusa_theoden.corp.adobe.com_1666/depot/branches/connect/1010/cocomoPlayer10.1/src/c om/adobe/rtc/messaging/manager/MessageManager.as:616]
    atcom.adobe.rtc.session.managers::SessionManagerBase/receiveItems()[/Users/arun/Work/apon nusa_theoden.corp.adobe.com_1666/depot/branches/connect/1010/cocomoPlayer10.1/src/com/adob e/rtc/session/managers/SessionManagerBase.as:458]
Regards,
Anu

I would try to login as owner (100) first then try to login again as a user (50).
Other than that take a look at the room console and see if the Access Model or Publisher Model is too high.
...russ

Insufficient access rights registering Oracle Directory Integration Server

Hi all!
following steps IÂ´ve done to use the Oracle Directory Integration Server.(IÂ´ve installed Oracle 10g infrastructure - OID is running - IÂ´m also able to apply successful with ODM and orcladmin account)
- oidctl connect=mydb1 server=odisrv instance=1 stop
- odisrvreg -h localhost -p 389 -D cn=orcladmin,cn=Users,dc=localhost;dc=com -w ,pass
where pass is the password of orcladmin.
-> now I get the following error:
registering..
Error javax.naming.NoPermissionException [LDAP:error code 50: Insufficient Access Rights]; remaining name 'cn=odisrv+orclhostname=maschine,cn=odi,cn=oracle internet directory' !
Any idea ??
Thanks for all help & comments.

I have gone through the documentation for creating the script. But there is one thing which I am not able to understand i.e. Subscription Parameters.
Can anyone tell me the use of subscription parameters? What is the role of subscription parameters in Oracle Lite and External Authentication.
Regards
Kapil

"Code -5000--- "insufficient access privileges for operation"

I use a M-Audio Ozonic, Digidesign Mbox, and a BCF2000 logic control.
Whenever I try to initiate an audio recording, this message pops up
"Insufficient access privileges for operation
Result code = -5000"
Has anyone encountered this. This is a new issue. has never happened before.
17" iMac G5 1.6 Ghz Mac OS X (10.4.7) 2 GB RAM w/ Logic express 7, Garageband, ProTools 6.4 LE w/ software bundle & Mbox. Ozonic, BCF2000

Did you upgrade os x or create a new user?
Select the folder icon here you save your audio projects and type Command I to open the information panel, then verify if you are the owner of the disk and if you have read/write permissions.
cheers
rob

Error when changing BPM: "Insufficient access privileges"

Hello, Logic Express gurus:
I am just a lowly fitness instructor trying to mix her own music (self taught DJ). When changing the BPM here's what I do:
I double click on the song track, then from the window that pops up, I click on the "Factory" pull down menu, then choose "Temp and Pitch Machine". When I change the BPM to the desired tempo and click "Process & Paste", I get the following error:
"Insufficient access privileges for operation (Result code -5000)", then another error stating:
"Error when creating temp file!"
It used to work beautifully. Can anyone assist me? Thanks.

Thanks for the reply, Matt. I tried your suggestion, but it did not make a difference in the tempo. I am bringing in MPEGs, by the way.
My method was working fine until I began getting this error message. Any further suggestions from you or anyone?

49 - Invalid Credentials vs. 50 -Insufficient Access

Need help understanding the difference between error codes
49 - Invalid Credentials and 50 -Insufficient Access
I'm getting a 50 - Insufficient Access when I'm in a "chaining" process and receive it on the target server. I've followed the instructions for chaining and am in need of some help. Also, where can I go to get detailed explanations for the error codes. My Admin manual does not do a good job of explaning.

These are ldap result codes and actually imply what they are saying. To simplify think of these as
49 - incorrect password
50 - permission denied
With regards to chaining, have you looked at the documenation and followed all the required steps such as creating the proxy identity and required ACI's on the target/remote server?
http://docs.sun.com/source/817-7613/suffixes.html#wp19889
An explaination of the ldap result codes can be found here
http://docs.sun.com/source/817-6707/resultcodes.html
Regards,
-Wajih

LDAP: error code 50 - Insufficient Access Rgiths

Hi,
I am newbie at Oracle Internet Directory. I hope you help me to resolve the following problem:
When I signed in the Oracle Director Manager with user "cn=orcladmin,cn=Users,dc=localhost,dc=com" and blank password
to create an entry (or attribute). I got error: [LDAP: error code 50 - Insufficient Access Rgiths]
How do I resolve this problem?
Thanks,
QuanND

Connecting as orcladmin requires using a password. The password has been established during installation of OID. By default from (9.0.4) on it is set to be the same password as the ias_admin password you provided during installation of the Oracle Infrastructure installation.
Notice that there are two (2) orcladmin entries in OID.
One cn=orcladmin is the OID superuser (same as root on UNIX) the other one is cn=orcladmin, cn=users,dc=your.default.domain
When you login to OID using ODM and specify only orcladmin ODM assumes by default this will be cn=orcladmin (aka root)
regards,
--Olaf

Import refused from file: "Insufficient access privileges"

Trying to import file into iMovie 09, get dialog: "(Insufficient access privileges for operation )"
Anyone know what that might mean?

I believe JVT is not a supported format in iMovie.
If you have QuickTime Pro, transcode your file by exporting and choosing the following settings:
1. File/Export
2. in Export choose "Movie to QuickTime Movie
3. Click Options
4. In Movie Settings for Video Choose AIC (Apple Intermediate Codec)
5. Size: 1280x720
6. Sound Settings: Format Linear PCM - Channel Stereo (but your file is mono... so I guess leave it at that) - Quality: Normal - Linear PCM Settings: Sample Size: 16 - Little Endian
After you exported this file, import it to iMovie '09.
(JVT, Joint Video Team was created by the union of two groups the ITU group taht started by creating H.26L back in the 90s and the MPEG group.)

Public folder migration 2010 to 2013 insufficient access rights

Hi,
I'm having a frustrating time with trying to migrate public folders. I've migrated all the mailboxes with no problems but when trying to migrate public folders with the same account it fails with this message;
Active directory response: 00002098: SecErr: DSID-03150BB9, problem 4003
(INSUFF_ACCESS_RIGHTS), data 0
--> The user has insufficient access rights.
The account is in the organisation management and recipient management group.
I've tried ticking the inherit permission box in AD security.
I've tried creating a brand new account with the same permissions.
Nothing works. I'm tempted just to export to pst and import it to the public folder mailbox.
Any help would be much appreciated.
Thanks

Hi Nick,
ensure that the new admin account has the allow inheritance permission included
Also ensure that the account has full rights to all the public folders in Ex2010
Go to the application log and there would be an event triggered for the same with some description. YOu can find that it might be failing permission on a particular public folder if so grant them access.
And also check if the permission failed public folder is mail enabled. If so please disable the mail enable on that PF cancel the migration request and start a new migration request with the below cmd
New-publicfoldermigrationrequest -sourcedatabase (Get-publicfolderdatabase -server servername -csvdata (get-content c:\contents.csv -encoding byte) -BadItemLimit 5000 -AcceptLargeDataLoss
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
Regards,
Sathish

LDAPException: error result (50); Insufficient access

Hi all,
I am getting the "netscape.ldap.LDAPException: error result (50); Insufficient access" during the .compare() method.Althogh the given user is authenticated properlly.
here is the code which I am using
doAuthenticate(){
     try {
          ld.connect( host, 389);
          ld.authenticate("uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot", "admin123");
          this.userdn = "uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot";
          LDAPAttribute attr = new LDAPAttribute("uniqueMember", userdn);
          // Test for group membership
          System.out.println("log -5 ==> creating attribute");
          boolean attrMatch = ld.compare(groupdn, attr);
          // Display the test results
          if (attrMatch) {
               System.out.println("\nIS A GROUP MEMBER!\n");
          } else {
               System.out.println("\nIS NOT A GROUP MEMBER!\n");
          } catch (LDAPReferralException e) {
               // Ignore referrals...
          } catch (LDAPException e) {
               System.out.println(e.toString());
          }finally{
               if ((ld != null) && ld.isConnected()) {
                    try {
                         ld.disconnect();
                         System.out.println("Conection closed");
                    } catch (LDAPException e) {
                         System.out.println("Error: " + e.toString());
}Thanks

The fact that a user can authenticate does not mean they have access to anything. You need to check your ACIs. Does your user have access to do the compare?
Eric

How can I give me the access to create a developer key in the market?

Hi!
I'm new in the basis area and I don't have access to create a developer key. A consultant need a developer key.
How can I give me the access in the market place to create it?
Thanks!

Hi
You need to get the access key from SAP.
Refer to the procedure of obtaining access keys from SAP in BASIS.
Security
Regards,
Raj

IFS-30027: Insufficient access to create a SchemaObject

Similar Messages

Maybe you are looking for