Igxprd 32, device driver stuck in an infinite loop

Just attempted to reset a hard drive on our T61 to its factory settings (Windows XP) using the "Recovery CD Set" (rescue and recovery cd, supplemental product recover cd, and 6 product recovery cd's). During the final step, the computer reboots itself; however, Windows can't load. I keep getting an error on a small blue screen, referencing a problem with "igxprd32" and that the device driver got stuck in an infinite loop. How can I fix this issue. (Product ID 6465CT0) Thank you!

Kindly try to boot the system into Safe mode and then uninstall the display driver.
After this you should able too boot the system into normal mode. Download the latest driver from lenovo website
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ld152ww.exe
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Bluescreen reads "device driver stuck in continuous loop"

I have no knowledge of computers at all. I have had my laptop for about 18 months I purchased it new online while living in London and it has had this problem basically from the beginning but I was slack and didnt try to get it fixed on warrantee.
It will turn on and work for a random period of time (sometimes 10 mins and sometimes 2 hours) then suddenly the screen goes blue and it reads a lot of numbers (I can get these and write them if required) and states "device driver stuck in a continuous loop beginning dump of physical memory, contact manufacturer for update on device. . . ."
I have no idea what this means or what I should do/who I should ask etc.
Can anyone advise me please?

Hi!
Its not easy to say what is wrong.
First of all, which notebook do you have exactly?
In your position, I would first check the RAM. There are some special tools and I do this always with Memtest86.
You can download an ISO image to burn it on a CD from [www.memtest86.com]
Boot from CD and test your RAM, maybe you will get some errors.
You can also reinstall Windows with the recovery disk. It could be a software or driver issue.
If you have more questions, I will try to help you.
Bye

Device Driver stuck in infinite loop

This propblem maybe only happed 2 times in the frist 6 months of my computer purchase, but the past few months it's been happening more and more untill it happens every day, or just about anytime I play a video game.
The exact error message is "The device driver got stuck in and infinite loop, this usually indicates a problem with the device itself or the device driver programming the hardware incorrectly"
The specs of my computer are
Windows Vista(Home Premium)
Gateway Fx6800-01e
Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz 2.67GHz
3.00 GB Memory
64-bit Operating System

Kindly try to boot the system into Safe mode and then uninstall the display driver.
After this you should able too boot the system into normal mode. Download the latest driver from lenovo website
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ld152ww.exe
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How do I cancel a sub vi stuck in an infinite loop?

Hi,
I am attempting an implementation of the Constrained Nonlinear Optimization sub vi. It works perfectly 99.9% of the time but gets stuck the other .1% of the time. It is supposed to time out when it cannot find a solution, but it is failing to do so. Consequently my VI regularly crashes.
Apparently this is a known issue with this subvi. The NI whitepaper mentions that this is caused by a subvi while loop that can get stuck in an infinite loop. The work around is suggested to be to add a counter to the loop and exit it after a certain number of iterations.
I can find the infinite loop occuring in the subvi. But the sub vi opens as a clone and will not let me edit it. How do I work around that?
Failing that, is there a way from the main vi to cancel the optimization vi after a certain time so that the program can move on?
Suggestions would be appreciated.

Abort the program. Press ctrl+M when you have VI opened as clone. This will open it in edit mode.

My Ipod is stuck in an infinite loop not like the others so far discussed

Today out of the blue my 5th Gen ipod displays the starts making an ominous clicking noise, displays the "sad ipod face" and then starts flashing "battery very low: please wait" then it shuts off the apple icon appears and the whole thing starts over. I've tried to boot it in Disk mode which I managed once right after it happened but I was hesitant to restore because I was at work and would loose all my songs. It then proceeded to freeze and now is stuck back in this infinite loop. I plugged it to two different computers and a car charger and nothing seems to make it charge but it had at least half a charge before it started with this thing. Someone Help Me Please!!!
30gb 5th gen ipod Windows XP Pro

Here is a pretty comprehensive post about the sad iPod icon. Be aware that it's quite involved and contains some info that will almost certainly void the warranty. If your iPod is still within the warranty period, you should use that option first.
The Sad iPod icon.
You can arrange online service here.
Service request.

Help: Stuck in an infinite loop with firmware update

Need some help here.
I have a 2013 21.5" iMac, running Mac OS X Mavericks 10.9.
Recently, during a firmware update, my kids pulled the cord (they claim innocence). Now, when I boot the machine, it goes to the white firmware update screen, does the full progress bar, and then shuts down.
It doesn't restart itself.
When I power it back on, it does the firmware update again.
How can I fix this? I have access to other Macs, USB keydrives, Firewire cable, etc. Just need to know exactly what to do. Tried searching the web, but didn't find an answer for this situation. I'd rather resolve myself than truck it down to the Apple Store.

You can try this:
Intel-based Macs: Resetting the System Management Controller (SMC)
If that doesn't work, see below.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Stuck in an infinite loop (heh) with Lion recovery

I'm running the Lion Internet recovery to get a fresh install of the OS on one of my systems, but I've hit a snag. Each time I click the "Install" button, I get a dialog box informing me the terms and conditions and Apple privacy policy has changed. It says "Click OK to view," and I do so. Unfortunately, nothing happens at this point. I just see the Lion installer still stalled where it was before. I can click the "Install" button again to be greeted by the same dialog box and click "OK" again, but I can't get further. I moved windows around to see if there is a policy hiding somehwere, but that doesn't appear to be the case. I even thought I might be able to agree to whatever changed if I logged into the Mac App Store on another computer, but I'm not notified of any updated policies when I do this. So, at this point, I'm sitting in front of a Macbook that refuses to let me do a clean Lion install because I can't agree to privacy policy updates it refuses to show me. If it makes any difference, this is an early 2008 white Macbook. What do I do?
UPDATE: I am not using the officially termed "Internet Recovery." I am, in fact, using the Cmd-R method which downloads from the Internet (hence the confusion). Sorry!

It's been deleted. You would need to boot into a Snow Leopard system so you could re-download it from the App Store. If you are able to do this then be sure to quit the installer when the download has finished. Copy the installer to a safe spot on your hard drive. You can make your own bootable DVD or flash drive once you have a copy of the installer: Burning A Lion Boot Disc. Also, see About Lion Recovery.

Trying to turn off two step verification but just stuck in an infinite loop

So, I try to turn two step verification off, I go to manage my ID, to Security and choose Turn off Two Step...so far so good
I am told that I have to choose three security questions, enter my DOB and provide a recovery email, then press Continue...still good
A window pops up asking whether I am sure I want to turn it off, it warns me that I have to choose three questions and I am presented with two buttons, Cancel or Turn Off (That turn off button looks very tempting...so I click it)
...so...I am asked to provide three new questions, my DOB and a recovery email address....
And repeat....and repeat...
I have tried on different browsers...I have tried on two different Macs and on a Windows pc....
Any help?

eh?

My droidx is stuck in an infinite loop at the start-up

Hello, I turned my droidx on yesterday and it can't get past the red eye. It freezes on the redeye then goes back to displaying "droid" then back to the redeye and it just continues this loop indefinitely. Anyone know how to fix this?
Thanks in advance

droidx is infinaite loop..i held down the home button and the power button and got to the android system recovery screen....at the bottom of the page it reads...E:cant open /cache/recovery/command......so what do i do now?...my options on screen are...wipe data/factory reset....or wipe cache partition.............help!!!!!

Stuck in an infinite loop trying to pick paypal (yes I am US)

So basically I have my account and I am trying to confirm a payment method for it. I have picked paypal multiple times (as of now i have 5 "billing agreements" with itunes in my account.) but i tunes will still not realize this and says i have to register a payment method every time i try to download a song. I tried using a credit card today and i got the whole "wrong security code" crap. this is really dumb. Support was of no help either.

eh?

MSI FX5200 Infinite loop error

Hi I’ve changed the PSU to see if this was the problem with the infinite loop error I’m getting. The PSU is AMD recommended or that is what it says on the box. How ever I fitted the PSU and re-booted the PC did a few things and them started 3DMARK03 and I was back in the infinite loop.
// Watchdog Event Log File
LogType: Watchdog
Created: 2004-04-27 14:48:28
TimeZone: 0 - GMT Standard Time
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
EaRecovery: 1
ShutdownCount: 96
Shutdown: 0
EventCount: 9
BreakCount: 9
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: nv4_disp
EventFlag: 1
DeviceClass: Display
DeviceDescription: NVIDIA GeForce FX 5200
HardwareID: PCI\VEN_10DE&DEV_0322&SUBSYS_91901462&REV_A1
Manufacturer: NVIDIA
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A1628 0006000E 000A1628 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: NVIDIA Corporation
DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 56.72
DriverFileVersion: 6.14.10.5672
DriverInternalName: nv4_disp.dll
DriverLegalCopyright: (C) NVIDIA Corporation. All rights reserved.
DriverOriginalFilename: nv4_disp.dll
DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 56.72
DriverProductVersion: 6.14.10.5672
I get this error with three different drivers for the video card MSI the one that came with the card NVIDIA’S latest drivers and the latest drivers on the MSI web site.

how many amps at plus 12v
Memtest86

Empty trash stuck in infinite loop....

I just upgraded to Mtn Lion and I have a hard drive with time machine back up from a leopard machine, I wanted to delete that, and use the drive with Mtn lion, I put the backups folder into trash and tried to empty it, it is stuck in an infinite loop, the items to delete is in -ve......anybody else seen this? how to recover, if I stop the process, the files are still there...any solutions?

Stop the process. Remove the files from Trash and put them back on the disk they came from.
Next, open Disk Utility (Applications/Utilities/Disk Utility.app), choose the hard disk that you were trying to delete the files from. Click the 'Erase' tab and then 'Erase...'.

SQL stored procedure Staging.GroomDwStagingData stuck in infinite loop, consuming excessive CPU

Hello
I'm hoping that someone here might be able to help or point me in the right direction. Apologies for the long post.
Just to set the scene, I am a SQL Server DBA and have very limited experience with System Centre so please go easy on me.
At the company I am currently working they are complaining about very poor performance when running reports (any).
Quick look at the database server and CPU utilisation being a constant 90-95%, meant that you dont have to be Sherlock Holmes to realise there is a problem. The instance consuming the majority of the CPU is the instance hosting the datawarehouse and in particular
a stored procedure in the DWStagingAndConfig database called Staging.GroomDwStagingData.
This stored procedure executes continually for 2 hours performing 500,000,000 reads per execution before "timing out". It is then executed again for another 2 hours etc etc.
After a bit of diagnosis it seems that the issue is either a bug or that there is something wrong with our data in that a stored procedure is stuck in an infinite loop
System Center 2012 SP1 CU2 (5.0.7804.1300)
Diagnosis details
SQL connection details
program name = SC DAL--GroomingWriteModule
set quoted_identifier on
set arithabort off
set numeric_roundabort off
set ansi_warnings on
set ansi_padding on
set ansi_nulls on
set concat_null_yields_null on
set cursor_close_on_commit off
set implicit_transactions off
set language us_english
set dateformat mdy
set datefirst 7
set transaction isolation level read committed
Store procedures executed
1. dbo.p_GetDwStagingGroomingConfig (executes immediately)
2. Staging.GroomDwStagingData (this is the procedure that executes in 2 hours before being cancelled)
The 1st stored procedure seems to return a table with the "xml" / required parameters to execute Staging.GroomDwStagingData
Sample xml below (cut right down)
<Config>
<Target>
<ModuleName>TransformActivityDim</ModuleName>
<WarehouseEntityName>ActivityDim</WarehouseEntityName>
<RequiredWarehouseEntityName>MTV_System$WorkItem$Activity</RequiredWarehouseEntityName>
<Watermark>2015-01-30T08:59:14.397</Watermark>
</Target>
<Target>
<ModuleName>TransformActivityDim</ModuleName>
<WarehouseEntityName>ActivityDim</WarehouseEntityName>
<RequiredWarehouseEntityName>MTV_System$WorkItem$Activity</RequiredWarehouseEntityName>
<ManagedTypeViewName>MTV_Microsoft$SystemCenter$Orchestrator$RunbookAutomationActivity</ManagedTypeViewName>
<Watermark>2015-01-30T08:59:14.397</Watermark>
</Target>
</Config>
If you look carefully you will see that the 1st <target> is missing the ManagedTypeViewName, which when "shredded" by the Staging.GroomDwStagingData returns the following result set
Example
DECLARE @Config xml
DECLARE @GroomingCriteria NVARCHAR(MAX)
SET @GroomingCriteria = '<Config><Target><ModuleName>TransformActivityDim</ModuleName><WarehouseEntityName>ActivityDim</WarehouseEntityName><RequiredWarehouseEntityName>MTV_System$WorkItem$Activity</RequiredWarehouseEntityName><Watermark>2015-01-30T08:59:14.397</Watermark></Target><Target><ModuleName>TransformActivityDim</ModuleName><WarehouseEntityName>ActivityDim</WarehouseEntityName><RequiredWarehouseEntityName>MTV_System$WorkItem$Activity</RequiredWarehouseEntityName><ManagedTypeViewName>MTV_Microsoft$SystemCenter$Orchestrator$RunbookAutomationActivity</ManagedTypeViewName><Watermark>2015-01-30T08:59:14.397</Watermark></Target></Config>'
SET @Config = CONVERT(xml, @GroomingCriteria)
SELECT
ModuleName = p.value(N'child::ModuleName[1]', N'nvarchar(255)')
,WarehouseEntityName = p.value(N'child::WarehouseEntityName[1]', N'nvarchar(255)')
,RequiredWarehouseEntityName =p.value(N'child::RequiredWarehouseEntityName[1]', N'nvarchar(255)')
,ManagedTypeViewName = p.value(N'child::ManagedTypeViewName[1]', N'nvarchar(255)')
,Watermark = p.value(N'child::Watermark[1]', N'datetime')
FROM @Config.nodes(N'/Config/*') Elem(p)
/* RESULTS - NOTE THE NULL VALUE FOR ManagedTypeViewName
ModuleName WarehouseEntityName RequiredWarehouseEntityName ManagedTypeViewName Watermark
TransformActivityDim ActivityDim MTV_System$WorkItem$Activity NULL 2015-01-30 08:59:14.397
TransformActivityDim ActivityDim MTV_System$WorkItem$Activity MTV_Microsoft$SystemCenter$Orchestrator$RunbookAutomationActivity 2015-01-30 08:59:14.397
When the procedure enters the loop to build its dynamic SQL to delete relevant rows from the inbound schema tables it concatenates various options / variables into an executable string. However when adding a NULL value to a string the entire string becomes
NULL which then gets executed.
Whilst executing "EXEC(NULL)" would cause SQL to throw an error and be caught, executing the following doesnt
DECLARE @null_string VARCHAR(100)
SET @null_string = 'hello world ' + NULL
EXEC(@null_string)
SELECT @null_string
So as it hasnt caused an error the next part of the procedure is to move to the next record and this is why its caught in an infinite loop
DELETE @items WHERE ManagedTypeViewName = @View
The value for the variable @View is the ManagedTypeViewName which is NULL, as ANSI_NULLS are set to ON in the connection and not overridded in the procedure then the above statement wont delete anything as it needs to handle NULL values differently (IS NULL),
so we are now stuck in an infinite loop executing NULL for 2 hours until cancelled.
I amended the stored procedure and added the following line before the loop statement which had the desired effect and "fixed" the performance issue for the time being
DELETE @items WHERE ManagedTypeViewName IS NULL
I also noticed that the following line in dbo.p_GetDwStagingGroomingConfig is commented out (no idea why as no notes in the procedure)
--AND COALESCE(i.ManagedTypeViewName, j.RelationshipTypeViewName) IS NOT NULL
There are obviously other ways to mitigate the dynamic SQL string being NULL, there's more than one way to skin a cat and thats not why I am asking this question, but what I am concerned about is that is there a reason that the xml / @GroomingCriteria is incomplete
and / or that the procedures dont handle potential NULL values.
I cant find any documentation, KBs, forum posts of anyone else having this issue which somewhat surprises me.
Would be grateful of any help / advice that anyone can provide or if someone can look at their 2 stored procedures on a later version to see if it has already been fixed. Or is it simply that we have orphaned data, this is the bit that concerns most as I dont
really want to be deleting / updating data when I have no idea what the knock on effect might be
Many many thanks
Andy

First thing I would do is upgrade to 2012 R2 UR5. If you are running non-US dates you need the UR5 hotfix also.
Rob Ford scsmnz.net
Cireson www.cireson.com
For a free SCSM 2012 Notify Analyst app click
here

UDP client stuck in infinite loop

public static void main(String args[]) throws Exception
      BufferedReader inFromUser= new BufferedReader(new   InputStreamReader(System.in));
      DatagramSocket clientSocket= new DatagramSocket();
      InetAddress IPAddress = InetAddress.getLocalHost();
      byte[] sendData = new byte[1024];
      byte[] receiveData = new byte[1024];
      String sentence = "";
      boolean quit = true;
           while(quit == true);
           String initiateConntact = "hi there";
           sendData= initiateConntact.getBytes();
           DatagramPacket sendPacket= new DatagramPacket(sendData, sendData.length, IPAddress, 9876);
           clientSocket.send(sendPacket);
           DatagramPacket receivePacket= new DatagramPacket(receiveData, receiveData.length);
           clientSocket.receive(receivePacket);
           String modifiedSentence= new String(receivePacket.getData());
           InetAddress getIPFromServer = receivePacket.getAddress();
           System.out.println("The server is located at : " + getIPFromServer);
           sentence = inFromUser.readLine();
           System.out.println("From Server:" + modifiedSentence);
              if(sentence.equals("bye"));
                 quit = false;
                         clientSocket.close();
      }I am just courious why this pice of code gets stuck in an infinite loop.
(it seems anyway). It doesnt even make it into the while statement. If i replace the while with an if statement, everything works smoothly. Does anyone know what is actually happening here and why?
Thanks for your time.

Why didnt the java compiler report the ;? or the
missing =?Because they're both syntactically valid.
You might want to code a loop with no body:
while ((ch = readChar()) != 0);
(same as)
while ((ch = readChar()) != 0)
// do nothing
And you might want to assign a boolean variable and compare it at the same time:
while (flag = callSomeMethod())
(as opposed to)
while ((flag = callSomeMethod()) == true)
Although in both cases I'd write them differently rather than making a statement which has 'side-effects' and makes for slightly less-readable code.

Iphone stuck in infinite loop, HELP!

my iphone after resetting all settings through settings>general>reset, is stuck in an infinite loop.
it turns on, shows the apple logo, then about a minute later the loading symbol appears, after 10mins it quickly flashs black and then starts the loop again, i have left it for over 12 hours, to see if it will fix itself, but it wont.
i cant get it into dfu or recovery mode, it wont even turn off until it runs out of battery and then repeats its loop. when i charge it it just starts the loop again!
please i really need help, if i cant resolve this problem, im not going to buy the ipad and the iphone 4g as i planned to do so.
please could anyone help!

If you can't get your iPhone into DFU or recovery mode, there is a major problem. You can make an appointment at an Apple store if there is one nearby.
This is a user to user help forum only, so doubtful if any fellow users will lose any sleep over your threat not to purchase an iPad or the next generation iPhone when released if this problem cannot be resolved. If not, more than likely there is a hardware problem or failure. If a problem arises with your PC that you cannot resolve, are you not going to purchase another PC either?

Igxprd 32, device driver stuck in an infinite loop

Similar Messages

Maybe you are looking for