Ii Phone 5 Not Discoverible Acura Hands Free Link

Has anyone else had issues with Acura's/Honda's Hands Free Link not discovering the iphone 5 therefore, unable to use the Hands free Link. It work great all all of a sudden it doesn't. I have done everything, spoke with Acura, they testing my Hands Free Link System and it's working fine. Any help would be greatly appreciated!

InnaB, this is an issue with iPhone. This is just MY speculation, hope Apple will release a fix soon. You can also leave a feedback here http://www.apple.com/feedback/iphone.html and PLEASE enter specific information of vehicle like Model, year and type of radio or Audio System your vehicle is equipped with when you fill out that feedback. I have encountered similar issues with other makes of cars too as I do a lot of testing of cars.There are some vehicles that work fine and then there are some that exhibit concerns like yours.
On a side note have you tried to RESET NETWORK settings and tried? Also unpair ALL BT sets, re-pair the iPhone to your vehicle and try it. Some instances I have encountered where the IiPhone was STILL paired to a HEADSET, it would NOT release it to work with another BT device. Some car audio systems have what's called an "Auto Pairing" which works awesome with iPhone, where you DONOT have to worry at all, start the vehicle, turn on audio system, iPhone auto pairs to that system. I donot know IF your vehicle is equipped with that design, check in the user manual of that system please.

Similar Messages

  • Pair phone to Acura hands free link not working

    I've deleted all paired phones and other Bluetooth devices. I still am unabl

     Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    In all honesty this sounds like a compatibility issues, I suggest contacting the Manufacturer of the BT device and asking if this device is compatible or not, they may even be able to supply firmware update instructions.
    You could also try resetting the in car BT as well, this would remove all previous BT profiles for other devices, which may be causing an issue.
    I apologize for any inconvenience this may cause.
    Don't forget to mark posts that answers the topic as Accepted Solution. 
    If you find any post helpful, press Kudos.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Honda Hands Free link causes phone to reboot

    I have my phone paired with my Honda hands free link however when I receive phone calls my phone will reboot. I have set the Bluetooth options to always trust this device and still am having the issue. Any recommendations?

    Honda has an entire troubleshooting site for HandsFreeLink. It's available to technicians and the public alike. I wonder if your technician even bothered to look at the HFL site. Many techs seem to be unaware of Honda's own online help.
    Go here:
    http://handsfreelink.com/
    Choose your vehicle and cell carrier. There is very extensive information available.
    Despite the site not having "Honda" in its URL, it is operated by American Honda.
    You did not say what model or year of Honda you have, otherwise I'd look things up for you.

  • HT204387 pair iPhone 5s running iOs7 with Hands free link in Acura TL

    I cannot get my iPhone 5s running iOs 7.0.4 paired with my 2005 Acura TL blutooth, HFL (hand free link). My old 3G paired with no problem. I have tried to reboot iPhone, changed the name of my phone, tried 000, 1234, 1010 for code, etc. Any help would be appreciated.

    Hi Judel762,
    If you are having issues pairing your new iPhone to your car's Bluetooth, you may find the following article helpful:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/ts3581
    Regards,
    - Brenden

  • Hand-free link in Accura MDX cannot connect to phone after update IOS 7.1.2

    After I updated the IOS 7.1.2 on both my iPhone 5s, the hand-free link in my MDX 2005  cannot connect/recognize to both my phones anymore.  What should I do? Please HELP!

    Apparently there are no supported carriers in Pakistan. So the carrier update was for a non-Pakistani carrier. If it worked in the past your phone was probably hacked to add local carrier support.

  • Does anyone have an Android phone that works with the hands free on a 2015 Honda Civic EXL -Nav?

    Does anyone have an Android phone that works with the hands free on a 2015 Honda Civic EXL -Nav?   I don't care about the HondaLink- just the hands free phone call/receive.

    My 5 starting doing this today....constant rebooting and or shutting off even after restoring to new phone.  Would love some impu!!

  • Verizon dealer claimed newer phones do not come with a free SD Card?

    Is it true that newer phones do not come with a free SD Card?
    Is the HTC Incredible 4G LTE supposed to come with a free SD Card?
    Back story:
    When the Verizon guy opened the box and started to set up my phone, he asked for my SD Card. Thinking to myself that this is rather odd, I asked him why he needed it. The Verizon guy replied that the newer phones do not come with a free SD Card. I still thought that was a bit odd, but didn't bother questioning it as I probably had no control over the situation either way. It's been about a week or so, and it's still bothering me. I feel like the guy just said that to get a free SD Card...
    Can anyone confirm if my HTC Incredible 4G LTE should have come with a free SD Card?
    If it was supposed to, how can I go about contacting Verizon about my situation?
    Thanks in advancee~

        pshhjay, I can address your concern about the inclusion of SD cards with new devices. Thank you to the community for your imput. I can confirm that you will begin to see more devices that do not include a SD card. That includes the new Incredible and Samsung Galaxy 3. No worries, since the SD card has been replaced with internal memory on each phone. I hope this helps! ^CM

  • Bluetooth: Volume Issue (Palm Pixi, Hands Free Link Bluetooth)

    Make/Model: Acura TL
    Year: 2008
    Carkit Model info (Manufacturer, firmware version, etc):
    Details of problem: Call volume is so quiet you can't hear anything on bluetooth HFL (Hands Free Link)
    webOS version:.4.5
    Included in compatibility list:
    Yesterday morning the built-in bluetooth on my car was working fine, then at lunch when I tried to use it it was impossible to hear the call.  I checked the phone and the volume is turned up all the way, and the bluetooth HFL is working fine with my husband's phone, so the issue has to be with my Palm Pixi.  I can hear the HFL commands and prompts without issue at a normal volume level (8-10) but to hear even a whisper of a conversation or even a ringtone I have to turn the volume up to about 40.
    I've tried to search on my Pixi to see if there are any settings I can adjust or update, but haven't been able to find anything.
    Anyone have suggestions about how to correct/address this issue?
    Post relates to: Pixi p120eww (Sprint)

    You have to go through the entire pairing process or can you just turn off Bluetooth and then turn it back on again, or go into the phone and select the car and they connect? If you are having to go through the pairing process again, it could be a problem with the vehicle. The iPhone uses the latest Bluetooth stack and it may be a problem with pairing with the vehicle system. Try contacting Honda/Acura and see if there are any firmware updates for the systems in the vehicle.

  • Iphone 4   Pairing   2010 Honda Civic with hands free link.

    I purchased this vehicle several months ago and paired my iphone with the hands free link with no problem.  All the sudden last week I started my car and noticed that the hands free did not connect.  I haver since tried numerous things, such as deleting the phone from history from the car system and try to pair again with no success.
    The iphone picks up the hands free link system. The hands free link gives the pair code (0000).  I enter the code, but then a message on the iphone states the code is correct but the pair was unsuccessful.  How can I correct this?  Thanks.

    Remove the phone from the device list in the vehicle. Remove the vehicle from the device list on the phone. Do a reset on the phone, holding the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, turn Bluetooth on for the phone. Then go into the vehicle and follow the manufacturer's instructions for putting the vehicle into pairing mode. See if you can pair the two devices.
    On occasion, devices will not always connect automatically. If after the devices pair this happens, just go into the Bluetooth setting on the phone, locate the listing for the car and tap on it. It should connect then. This will prevent the need to try and pair the two devices again.
    You can also see if this support document helps you any. http://support.apple.com/kb/TS3581

  • Hand Free Link when in Maps

    When I get in my Honda accord and my iphone 6 links up via bluetooth, then use maps, it always defaults to giving map directions via the hands free link (honda speaker system).  Each time I start a map I can click on microphone and tell it to use iphone rather than hands free link.  Is there a way that I can set things up so that it always defaults to iphone?  Also when I use google maps, I would also like it to use iphone for audio.  Can't find out how to change this in google maps.
    Also, is google maps more reliable than the iphone maps?

    Just as a side question:
    Have you ever loaded a tracklog containing different tracks belonging to more than 1 month?
    This is what a tracklog with tracks from 10/14/2011 to 11/07/2011 looks like here:
    Dropdown for the first November 2011 row:
    Dropdown for the second November 2011 row:
    Not a big problem, but also not nice.
    Beat
    Message was edited by: b_gossweiler: cosmetics

  • Hands Free Link (HFL) on Acura TL does not work with iPhone 3G

    I pair iPhone successfully, and can pick up the incoming calls. However, when I make an outgoing call on iPhone, and tell it to use HFL, the call is not transferred to HFL.
    HFL works fine with my Treo 650, including picking the outgoing calls.
    Is there a software update or setting for either iPhone or Acura?
    Thanks,
    Inna

    InnaB, this is an issue with iPhone. This is just MY speculation, hope Apple will release a fix soon. You can also leave a feedback here http://www.apple.com/feedback/iphone.html and PLEASE enter specific information of vehicle like Model, year and type of radio or Audio System your vehicle is equipped with when you fill out that feedback. I have encountered similar issues with other makes of cars too as I do a lot of testing of cars.There are some vehicles that work fine and then there are some that exhibit concerns like yours.
    On a side note have you tried to RESET NETWORK settings and tried? Also unpair ALL BT sets, re-pair the iPhone to your vehicle and try it. Some instances I have encountered where the IiPhone was STILL paired to a HEADSET, it would NOT release it to work with another BT device. Some car audio systems have what's called an "Auto Pairing" which works awesome with iPhone, where you DONOT have to worry at all, start the vehicle, turn on audio system, iPhone auto pairs to that system. I donot know IF your vehicle is equipped with that design, check in the user manual of that system please.

  • Phone Audio on Jabra SP700 Hands Free

    I have a Palm Centro and a JabraSP700. I am able to setup the Palm Centro to communicate with the Jabra. But, I am unable to get the phone audio to play on the Jabra. When I make a phone call, the Jabra says that it is connected. When I quit the phone call, the Jabra says "call ended" and so it's clear the Jabra is communicating with the Palm  But, the phone call audio remains on the Palm Centro.I can switch the audio from the normal ear speaker to the Palm Centro speakerphone and the audio goes to the phone speakerphone. Now, when I first did the setup, I got audio to go to the Jabra but that happened once and no more.  I've searched the Internet far and wide but there seems very few instructions for this kind of task. The Palm instruction manual has very little in this regard.
    Post relates to: Centro (AT&T)

    Hey, sorry to inform you but your particular bluetooth headset is not compatible for your Centro device. I have included in this posting the bluetooth headset compatiblity list (please check for the manufacturer of your headset, then the model number). Please click or paste the URL into your web browser: http://kb.palm.com/SRVS/NUA/launchKB.asp?c=45126&f​n=centro&mn=centro&cn=att
    Post relates to: Treo 800w (Sprint)

  • I just bought the new Iphone4s. My old phone was synced to my car. How do I get rid of that one so I can use my hands free blue tooth for my Nissan Rogue 2010

    I just bought the Iphone4s. My old phone is syncked with my hands free bluetooth. How do I get rid of my old phone so I can sync my new phone. My old phone wasn't an Iphone. My car is a 2010 Nissan Rogue? The car manual isn't very helpful.

    You need to unpair the old phone from your car. The car manual may not be helpful, but unless someone here has the same car we will be even less helpful. One tip, however; make sure the new phone has a different name than the old phone.

  • Q10 microphone not working hands free

    Greetings,
    I just noticed that my microphone will not work if I want to call hands free or use Skype with video on.
    I just updated to 10.02 but I don't know if the problem is due to the upgrade or if it a hardware issue as I did not try using hands free before the system upgrade.
    Please help as I need to use hands free when driving and using Skype.
    Thanks,
    Michel

    Hi and Welcome to the Community!
    Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
    Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • IPhone 4 can’t connect with BMW Bluetooth hand free

    Dear all,
    Afterupdate to 4.3.3 my iPhone 4 isn’t recognize by my BMW hand free Bluetoothsystem, why??
    Is sodangerous to not have my hand free… my other phone HTC is still working verywell…
    Thanks inadvance
    PS 1 I have reset and try to reconnect my IPhone… no way!
    PS 2 Why the IOS4.3.3 doesn’t exist as possible choice in the community?

    I am also having this problem.  I can make calls right after deleting and repairing my phone and my bmw but it doesn't work awhile later.  was working fine prior to 4.3.3.  I have passcode key lock on that caused problems in the past but was working again in recent versions.  2006 e90 no idrive.

Maybe you are looking for

  • How do I sync my 'on my mac' contacts to contact in iCloud?

    Can somebody help me sync or transfer my contacts from 'on my mac' contacts (which I got by syncing it with google contacts) to iCloud so that all my apple devices will have the same contacts please. Or better yet, here's my current situation: I rece

  • Hyper-V Role deployement with MDT2013 on a Server 2012R2 Trial Version

    Hello,  when i deploy a custom image that i add the roles install Hyper-V, everything works fine, added the SkipRoles=Yes,  and the role Hyper-V is installed at the end of my new server 2012R2 Trial version, HOWEVER, there's no icon that appears on t

  • Does skype run through safari?

    Hiya, I'm really not technically minded so please bare with me! My parents are going on a cruise to the Caribbean from the UK and we were trying to work out the best way to keep in touch. So me and my dad (we both have iphone 4's) have down loaded th

  • How to use additional authorization creator?

    Hi All, I want to know how I can use additional authorization creator to give or not giving authorization to user forms and reports to different user? the help doesn't explain much. the main confusion is what should be given as 'Authorization ID'. sh

  • Where does System.err.println("huh?"); goto?

    Hi. Where does the System.err.println("asdfds"); goto for .class files? When I try this for .jsp files, I get an output line in the console, expected. :> But when I put it in a class I'm using in that jsp file, I don't get anything anywhere, or at le