IIS Configuring problrm
i recently switched from coldfusion 7 inbuilt web server to
coldfusion 8 with IIS on windows Xp Server pack 2 Professinal
editon. I have succesfully installed the mappings in the IIS Admin
and folders like Jscripts and CFIDE exists under the IIS console..
When i try to run the the path of
CFADMIN as:
http://127.0.0.1/CFIDE/administrator/index.cfm
it comes to one error saying:
YOU ARE NOT AUTHORIZED TO VIEW THIS PAGE
HTTP 401.1 - Unauthorized: Logon Failed
Internet Information Services
I AM WITH ADMIN PRIVELIGES ADN IF I RUN ONLY THE
HTTP://127.0.0.1
STILL I GET TYHE SAME ABOVE ERROR
CAN ANYONE HELP ME IN THIS REGARDS
I TRYING CHECKING ALL THE SERVICES AND THE FIREWALL SETTINGS
BUT NO SUCCESS TILL YET
PLZ HELP ME THANKS
more info here:
http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=webservmgmt_5.html
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com
Similar Messages
-
Monitoring two servers with same IIS configuration using SCOM
Hello,
We have two servers which has the same IIS configuration including sites names, how do we configure APM to monitor and get events captured on two different monitors on SCOM 2012 R2.
Thank you, Anand
Anand FranklinHi Anand,
There is no problem at all, if applications IIS paths (Web Site names + Web application name in IIS) absolutely match. Make sure both servers have SCOM Agent installed and connected to the same Management Group.
In .NET Application Performance Monitoring template just keep Target Group field blank (it's blank by default) - that will mean the application will be monitored on each server within Management Group where it's discovered. The same configuration of
APM monitoring will be used for all app instances.
If you want to monitor the app only on two servers, and at the same time the app is hosted on more than these two boxes, you can create Windows Computer group populated with appropriate servers and specify this group as Target for APM monitoring.
If you want to differentiate APM configuration for specific app instances, you should create several Windows Computer groups and bind each group with separate configuration - in this case you will have to run .NET Application Monitoring template several
times, picking up the same app, but changing APM settings and setting new Target Group.
Igor Savchenko, VIAcode Consulting LLC (http://www.viacode.com/) -
Error in IIS Configuration while Server Diagostic
Hi Guys,
While running the Server Diagnostic, I get error on IIS Configuration Step.
X Osoft virtual directory
X Cannot get Osoft virtual directory object: Automation error The System cannot find the path specified -Incorrect
I am not able to send the the data to the server also. when I try to send the data it says..." an error occured while communicating with the web server"
Not sure though that this error is because of Osoft virtual Directory...
Any one faced this problem?RaciMishra,
Please check out SAP Knowledge Base article 1532499. Doing this fixed my problem with installing BPC 7.5 SP07 on my Win 2008 R2 .NET server and all my lights now show up green for the Diagnostic screen.
Symptom
When running BPC server diagnostics, the following error is displayed on the IIS Configuration item:
"Cannot get OSoft virtual directory object: Automation error. The system cannot find the path specified. - Incorrect."
Resolution
The resolution to this problem is to disable User Account Control on Windows Server.
To turn off UAC
Click Start, and then click Control Panel.
In Control Panel, click User Accounts.
In the User Accounts window, click User Accounts.
In the User Accounts tasks window, click Turn User Account Control on or off.
If UAC is currently configured in Admin Approval Mode, the User Account Control message appears. Click Continue.
Clear the Use User Account Control (UAC) to help protect your computer check box, and then click OK.
Click Restart Now to apply the change right away, or click Restart Later and close the User Accounts tasks window.
- Dave Wollenweber -
Event id: 12 source IIS-configuration
Hello
We have event 12 source iis-configuration entering the Microsoft-IIS-Configuration/Administrative channel.
Server is 2008r2.
Unable to find schema for config section system.serviceModel/(then many differing entries). This section will be ignored.
Physical path c:\windows\microsoft.net\frameworks64\v2.0.50727\config\web.config
I have read to ignore
this warning but would rather stop it.
Ideas?
Any ideasHello,
This should be asked in Microsoft's IIS forums:
http://forums.iis.net/
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Application Server Role, Web Server (IIS): configuration error
I am installing file en_sharepoint_server_2013_with_sp1_x64_dvd_3823428.iso on a Windows Server 2012 R2 that is a Virtual Machine in VMWare. After mounting the file I run prerequisiteinstaller.exe, which errors with:
Application Server Role, Web Server (IIS): configuration error
After some research I am pointed to KB2771431. I download Hotfix file Windows8-RT-KB2771431-x64.msu, which it says is for Windows Server 2012 but when attempting to install I get error:
The update is not applicable to your computer.
My question is where do I go from here?Can you try to install the most recent .NET Framework updates?
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
I've inherited an Exchange 2010 setup that is not complete. Autodiscover for instance doesn't work, so mobile users have to manually configure settings. I'm trying to rectify that.
Looking at the IIS configuration I see that virtually everything is forwarded to https://mail.domain.here/owa (the domain is an actual domain, just obfuscating here) - is that the way it's supposed to be or has a previous admin been overly helpful in trying
to get web mail users redirected to the right page to do mail or something?Thanks!
I tried turning it off and that didn't really do much, but once I started looking your comment about connecting to localhost finally made me look at where the web sites are bound and the second separate site is answering only on the external IP of the machine.
That particular site only has a subset of the subdirectories visible in the default site. I presume this is some sort of security upgrade or some such.
I very recently redirected a lot of internal connections to https://mail.domain.com/owa, ews and so on as I'm trying to switch to using a certificate without .local internal addresses, so I think I've tracked down the reason why I'm having issues with calendars
and autoreply setting being impossible here as well. Once I redirected all those URI inside Exchange, the outlook clients started trying to go to this incomplete Exchange web (mail.domain.com) instead of the complete one that is only accessible on the
inside (exchangeserver.domain.local).
I didn't think I needed to go the split brain route and redirect mail.domain.com to an internal IP but clearly I do and I've implemented that now, as well as changed that hard redirect to a relative one. Remains to be seen if that clears up my issues, but
at least I think I'm getting closer. -
Cannot install SharePoint 2013 with SP1 on server 2012 R2. IIS configuration error
Hey Guys,
I'm experiencing a problem which seems to be common considering the number of posts I've found about it, but none of the provided solutions worked for me.
I'm simply trying to install SharePoint 2013 with SP1 on a Windows Server Standard 2012 R2.
I've downloaded from the MS Volume Licensing website the "SharePoint Server 2013 with SP1" ISO file : SW_DVD5_SharePoint_Server_2013w_SP1_64Bit_English_MLF_X19-36118. So
this is the slipstreamed version which is supposed to bring compatibility with 2012 R2.
As I do not have direct access to the Internet I need to perform an offline installation. I also downloaded all prerequisities. When I run prerequisiteinstaller.exe with the necessary arguments, I get the following :
(Full log file is below)
I've tried the following :
- Restarted the server multiple times
- Manually removing/adding IIS role + restart
- Running the prerequisiteinstaller.exe from the DVD or from an extracted version
- Manually installing the prerequisities
- Installed .Net 3.5 as recommended here (http://social.technet.microsoft.com/Forums/office/en-US/0b597d35-b02d-4236-894d-38efc0c7c6f6/sharepoint-2013-with-sp1-install-on-windows-server-2012-r2?forum=sharepointgeneral)
None of the worked. So I'm stuck and I must completed the installation of this before the end of the week for an important project !
Your help would be greatly appreciated.
this is the complete log file :
2014-09-09 14:30:26 - Processor architecture is (9)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Common Startup
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-09-09 14:30:26 - Trying to remove the startup task if there is any.
2014-09-09 14:30:26 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-09-09 14:30:26 - Successfully deleted the startup task
2014-09-09 14:30:26 - Analyzing the following command line argument:
2014-09-09 14:30:26 - /continue
2014-09-09 14:30:26 - Continuing after restart
2014-09-09 14:30:26 - Details of the current operating system:
2014-09-09 14:30:26 - Major version number of the operating system: (6)
2014-09-09 14:30:26 - Minor version number of the operating system: (2)
2014-09-09 14:30:26 - Build number of the operating system: (0X23F0=9200)
2014-09-09 14:30:26 - Major version number of the latest Service Pack: (0)
2014-09-09 14:30:26 - Minor version number of the latest Service Pack: (0)
2014-09-09 14:30:26 - Platform ID of the operating system: (2)
2014-09-09 14:30:26 - Product suites available on the operating system: (0X110=272)
2014-09-09 14:30:26 - Product type of the operating system: VER_NT_SERVER
2014-09-09 14:30:26 - Product type: (0)
2014-09-09 14:30:26 - OS type: (2)
2014-09-09 14:30:26 - Configuring the application's property sheet...
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Management Framework 3.0
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - PowerShellVersion
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 4.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft .NET Framework 4.5
2014-09-09 14:30:26 - Reading the following DWORD value/name...
2014-09-09 14:30:26 - Install
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:26 - The value is (1)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 4.5.51641
2014-09-09 14:30:26 - A post release .NET 4.5 is installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 6.1.7600.0
2014-09-09 14:30:26 - The prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-09-09 14:30:26 - Reading version of the following file...
2014-09-09 14:30:26 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-09-09 14:30:26 - GetFileVersionInfoSize failed (-2147024894)
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 10.51.2500.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Server AppFabric
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - ProductVersion
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft Information Protection and Control Client
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft WCF Data Services 5.0
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 5.0.51212.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft WCF Data Services 5.6
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.6
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 5.6.61587.0
2014-09-09 14:30:26 - The prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-09-09 14:30:26 - Reading the following DWORD value/name...
2014-09-09 14:30:26 - IsInstalled
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-09-09 14:30:26 - Beginning download/installation
2014-09-09 14:30:26 - Created thread for installer
2014-09-09 14:30:26 - "C:\Windows\system32\dism.exe" /online /enable-feature /featurename:NetFX3 /All /norestart
2014-09-09 14:30:27 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:28 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:29 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:30 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:31 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:32 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:33 - Install process returned (0)
2014-09-09 14:30:33 - [In HRESULT format] (0)
2014-09-09 14:30:33 - "C:\Windows\system32\WindowsPowerShell\v1.0\powershell.exe" -ExecutionPolicy Bypass "C:\Users\DADM_T~1\AppData\Local\Temp\PreFB24.tmp.PS1"
2014-09-09 14:30:33 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:34 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:35 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:36 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:37 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:38 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:39 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:40 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:41 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:42 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:43 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:44 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:45 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:46 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:47 - Install process returned (0)
2014-09-09 14:30:47 - [In HRESULT format] (0)
2014-09-09 14:30:47 - "C:\Windows\system32\dism.exe" /online /enable-feature /all /featurename:IIS-ASPNET45 /norestart
2014-09-09 14:30:47 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:48 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:49 - Install process returned (0)
2014-09-09 14:30:49 - [In HRESULT format] (0)
2014-09-09 14:30:49 - "C:\Windows\system32\iisreset.exe" /noforce
2014-09-09 14:30:49 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:51 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:52 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:53 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:54 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:55 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:56 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:57 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:57 - Install process returned (0X426=1062)
2014-09-09 14:30:57 - [In HRESULT format] (0X80070426=-2147023834)
2014-09-09 14:30:57 - Last return code (0X426=1062)
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - Flags
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - PendingFileRenameOperations
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-09-09 14:30:57 - Reading the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-09-09 14:30:57 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-09-09 14:30:57 - Last return code (0X426=1062)
2014-09-09 14:30:57 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
2014-09-09 14:30:57 - Cannot retry
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Management Framework 3.0
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - PowerShellVersion
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 4.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft .NET Framework 4.5
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - Install
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:57 - The value is (1)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 4.5.51641
2014-09-09 14:30:57 - A post release .NET 4.5 is installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 6.1.7600.0
2014-09-09 14:30:57 - The prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-09-09 14:30:57 - Reading version of the following file...
2014-09-09 14:30:57 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-09-09 14:30:57 - GetFileVersionInfoSize failed (-2147024894)
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 10.51.2500.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Server AppFabric
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - ProductVersion
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft Information Protection and Control Client
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft WCF Data Services 5.0
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 5.0.51212.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft WCF Data Services 5.6
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.6
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 5.6.61587.0
2014-09-09 14:30:57 - The prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - IsInstalled
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-09-09 14:32:19 - Opening log file
2014-09-09 14:32:19 - Opened action for user
2014-09-09 14:32:19 - C:\Users\DADM_T~1\AppData\Local\Temp\prerequisiteinstaller.2014.09.09-14.30.26.logThank you guys for the quick answer! Muche appreciated
I've tried all suggested solutions, but no luck :-(
- tried http://support.microsoft.com/kb/2765260 > no help and by the way the hotfix provided is not applicable for 2012 R2.
also tried "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regii -enable -i" and got this :
Microsoft (R) ASP.NET RegIIS version 4.0.30319.33440Administration utility to install and uninstall ASP.NET on the local machine.Copyright (C) Microsoft Corporation. All rights reserved.Start installing ASP.NET (4.0.30319.33440).This option is not supported on this version of the operating system. Administrators should instead install/uninstall ASP.NET 4.5 with IIS8 using the "Turn Windows Features On/Off" dialog, the Server Manager management tool, or the dism.exe command line tool. For more details please see http://go.microsoft.com/fwlink/?LinkID=216771.Finished installing ASP.NET (4.0.30319.33440).
http://social.technet.microsoft.com/wiki/contents/articles/14582.sharepoint-2013-install-prerequisites-offline-or-manually-on-windows-server-2012-a-comprehensive-guide.aspx
> is not for 2012 R2.
For the automated install script (http://gallery.technet.microsoft.com/office/DownloadInstall-SharePoint-e6df9eb8) Craig mentions that the script are not yet compatible
"SharePoint 2013 SP1 and Windows Server 2012 R2 support coming soon
I will be updating this script with support for SharePoint 2013 Service Pack 1 installations along with support for Windows Server 2012 R2 in the near future. Thank you to everyone for the interest in my scripts - it is much appreciated! " -
Hello
I know that I am most probably in the worng forum but may be somebody still answers my question???
I developped an application w ColdFusion and I want to host it within a private domain (so the site can only be seen within that domain). Lets assume the domain is called "mydomain.local". There is a server responsible for the DNS, this one is called dnsserver01 (IP 192.168.10.1) and runs Windows Server 2008. Then I have a server called webserver01 (IP 192.168.10.11) , this one is running my ColdFusion application on Windows Server 2003. IIS is running on webserver01 too.
My questions:
- Can I set up something like "myapplication.mydomain.local" which points to my application which I built on webserver01?
- If yes, do I have to set up a "virtual directory" or a "virtual host" on IIS?
- If yes, what do I have to set up on the DNS on dnsserver01? Is it in "forward looking zones"? What record do I have to set up (A record etc)?
Finally I would like that any computer resp. user in the domain mydomain.local can open a browser and type "myapplication.mydomain.local" and my application should show up....
Thank you very much for informationI think you could do it in a much simpler way, unless I am missing something. In the DNS server, map 192.168.10.11 to myapplication.mydomain.local. As you had installed ColdFusion on 192.168.10.11(webserver01) and, presumably, configured ColdFusion for IIS using the Web Server Configuration Tool, you would have automatically created a virtual directory for the ColdFusion site.
-
WebSAPConsole & HTTP (IIS) Configuration
I am very confused about the final setup of WebSAPConsole. I have it installed & deployed and I have created a profile in the SAP Console Administrator. The final step in the manual is a step to configure IIS. My questions are:
1. I thought that SAP was not supporting isapi anymore. What is the replacement
2. Does IIS have to be configured on the server where WebSAPConsole is running or on a IIS server.Thanks!
I tried turning it off and that didn't really do much, but once I started looking your comment about connecting to localhost finally made me look at where the web sites are bound and the second separate site is answering only on the external IP of the machine.
That particular site only has a subset of the subdirectories visible in the default site. I presume this is some sort of security upgrade or some such.
I very recently redirected a lot of internal connections to https://mail.domain.com/owa, ews and so on as I'm trying to switch to using a certificate without .local internal addresses, so I think I've tracked down the reason why I'm having issues with calendars
and autoreply setting being impossible here as well. Once I redirected all those URI inside Exchange, the outlook clients started trying to go to this incomplete Exchange web (mail.domain.com) instead of the complete one that is only accessible on the
inside (exchangeserver.domain.local).
I didn't think I needed to go the split brain route and redirect mail.domain.com to an internal IP but clearly I do and I've implemented that now, as well as changed that hard redirect to a relative one. Remains to be seen if that clears up my issues, but
at least I think I'm getting closer. -
Just installed CF Expess on my local machine configured with
IIS. Getting the following error:
Error Diagnostic Information
Attempt to access a Session variable when session management
is not enabled. Use the CFAPPLICATION tag to enable session
management.
Note: This feature may have been disabled by the site
administrator.
The error occurred while processing an element with a general
identifier of (CFPARAM), occupying document position (9:1) to
(9:85).
Date/Time: 01/31/08 16:02:08
Browser: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
rv:1.8.1.11) Gecko/20071127 Firefox/2.0.0.11
Remote Address: 127.0.0.1
Template: c:\inetpub\wwwroot\learncfe\hour4\welcome.cfm
Thanks in advanceJust do what the error message suggests. Make sure that
session
management is allowed in the ColdFusion Administrator, and
that you have
defined an Application and enabled session management with
either a
<cfapplication...> tag OR a Applicaiton.cfc
this.sessionManagement
parameter. -
IIS configuration with Weblogic 10gR3
Hi All,
We are using IIS 6.0 as the proxy server in our portal application. The portal server is Weblogic 10gR3. I have followed some documents to configure it. (http://download-llnw.oracle.com/docs/cd/E13222_01/wls/docs103
/plugins/isapi.html). But I am not able to configure that. Can any body help me in configuring IIS server as a proxy server.
Thanks & Regrads
Abani R. BeheraConfigure IIS Plug-in with Weblogic Server
1. Make a directory on the IIS box for the plug-in.
For instance: c:\Inetpub\WLS_IIS_Plugin\
2. Copy iisforward.dll and iisproxy.dll to this new directory.
These files are located at:
10.0: \wlserver_10.0\server\plugin\win\32
10.3: \wlserver_10.3\server\plugin\win\32
3. To install iisforward.dll as an ISAPI filter, do the following:
Go to Start->Administrative Tools->Internet Information Services
(IIS) Manager
In the left pane, drill down to the active website
(like "Default Web Site")
Right-click the active website and select Properties
Select the ISAPI Filters tab and press the Add button
Filter name: WLS IIS Plugin
Or whatever you want
Executable: C:\Inetpub\WLS_IIS_Plugin\iisforward.dll
Or whatever path you created
Press OK twice
IIS6 does not allow the iisforward.dll ISAPI Extension to run by default.
To enable:
In the left pane of the Internet Information Services (IIS) Manager,
click on Web Service Extension (located under the computer name)
In the right pane, highlight All Unknown ISAPI Extensions and press
the Allow button
4. To map .wlforward to use iisproxy.dll, do the following:
a. In the left pane, drill down to the active website (like
"Default Web Site")
b. Right-click the active website and select Properties
c. Select Home Directory tab
d. Click the Configuration... button.
e. In the Application Mapping tab, click the Add... button.
a. Executable: C:\Inetpub\WLS_IIS_Plugin\iisproxy.dll
b. Extension: .wlforward
f. Uncheck Verify that file exists
g. IMPORTANT: Ensure .wlforward is not mapped to iisforward.dll.
While this seems intuitive, it is wrong. .wlforward maps to
iisproxy.dll.
h. Press OK three times
i. Exit the IIS Manager MMC console.
5. Create a text file named iisproxy.ini and place it in the plug-in
directory (e.g. c:\Inetpub\WLS_IIS_Plugin\iisproxy.ini)
iisproxy.ini
WebLogicCluster=localhost:7001,localhost:7003
WlForwardPath=/
Debug=ALL
DebugConfigInfo=ON
WLLogFile=c:/temp/iisproxy.log
6. Restart IIS using the following CLI statement: iisreset /restart
7. Use a browser to access IIS. This will 'turn on' the IIS->WLS
ISAPI filter.
8. Relaunch the IIS Manager and check the ISAPI filter tab to ensure
the iisforward.dll is now 'turned on', as evidenced by a green arrow. -
Problem setting up ColdFusion on Windows 7 and IIS
Using Windows 7 version 6.1 Build 7601 Service Pack 1 on a Dell N5110 Laptop running an Intel Core i5-2430M CPU @ 2.4 GHz and 6 GB RAM, 64-bit OS.
Under Control Panel > Programs > Turn Windows Features On and Off > Internet Information Services I have turned on all the features and subfeatures EXCEPT for FTP Server. Internet Information Services Hostable Web Core is also turned ON though it's unclear whether it's necessary or not.
Installed ColdFusion version 10 after enabling IIS as described above.
Used instructions at http://learn.iis.net/page.aspx/266/troubleshooting-failed-requests-using-tracing-in-iis/ to set up and test tracing, working around all the ambiguities and errors there until tracing actually worked as described for a 404.2 error on a .asp file. THEN reset the trace to work on all 500 errors for ISAPI Extension and WWW Server.
Ran the Web Server Configuration Tool for ColdFusion as described at http://help.adobe.com/en_US/ColdFusion/10.0/Installing/WSc3ff6d0ea77859461172e0811cdec18a1 5-7ffb.html to configure IIS for ColdFusion in Windows. Then these parts of the configuration were possible to verify at C:\ColdFusion10\config\wsconfig :
Verify your IIS configuration
Verify that the following folder was created: cf_root/config/wsconfig/number.
To set the <samp class="codeph">connectionpooltimeout</samp> and <samp class="codeph">reuseconnectioncount</samp> click on Advanced Setting tab. The option to enable buffering and verbose debugging is available on the same page.
Configuring IIS:
Creates a folder <samp class="codeph">1</samp> in <samp class="codeph">cfroot\config\wsconfig</samp>, that contains all connector-related files.
Creates a virtual directory <samp class="codeph">Jakarta</samp> in <samp class="codeph">cfroot\config\wsconfig</samp> (in IIS).
Adds an entry, <samp class="codeph">tomcat</samp>, under the<samp class="codeph"> ISAPI FILTERS</samp>. This points to <samp class="codeph">cfroot\config\wsconfig\1\isapi_redirect.dll</samp>.
Some of the parts of the verification process were skipped, for the reasons described :
Adds an entry, <samp class="codeph">tomcat</samp>, to <samp class="codeph">cfroot\config\wsconfig\1\isapi_redirect.dll</samp> with permission <samp class="codeph">allowed</samp> under ISAPI and CGI Restrictions. It is applicable for global sites in IIS manager.
No kind of 'entry' is possible for the specified .dll at that location under its Properties, nor can permissions be allowed under Properties for anything remotely resembling 'ISAPI and CGI Restrictions'. There is nothing resembling "Global Sites" in IIS manager either where this information might be found.
Adds the following <samp class="codeph">isapi</samp> handlers: <samp class="codeph">cfcHandler</samp>, <samp class="codeph">cfmHandler</samp>, <samp class="codeph">cfmlHandler</samp>, <samp class="codeph">cfrHandler</samp>, and <samp class="codeph">cfswfHandler</samp>.
The logical place for these "handlers" would be in IIS but there is no description provided for where they might be found and searching around provides no clues so this is impossible to verify as well.
For debugging issues, set the log level to <samp class="codeph">debug</samp>, in the <samp class="codeph">isapi_redirect.properties</samp> file present in the <samp class="codeph">cfroot\config\wsconfig\1\ </samp>directory.
This was done and these are the contents of that file:
extension_uri= /jakarta/isapi_redirect.dll
log_file= C:\ColdFusion10\config\wsconfig\1\isapi_redirect.log
log_level= debug
worker_file= C:\ColdFusion10\config\wsconfig\1\workers.properties
worker_mount_file= C:\ColdFusion10\config\wsconfig\1\uriworkermap.properties
iis_buffer_enable= true
To disable webserver buffer, change the <samp class="codeph">is_buffer_enable</samp> to <samp class="codeph">false</samp> in the <samp class="codeph">cfroot\config\wsconfig\1\isapi_redirect.properties</samp> file. Disable webserver buffer if you want <samp class="codeph">cfflush</samp> to work over an IIS connector. If your application does not use <samp class="codeph">cfflush</samp>, set it to <samp class="codeph">true</samp> for increase in the performance.
This was left on 'true' as shown in the file contents above.
THIS IS THE ERROR NOW OBTAINED at http://127.0.0.1/CFIDE/administrator/index.cfm:
Server Error in Application "DEFAULT WEB SITE"
Internet Information Services 7.5
<fieldset><legend>Error Summary</legend>
HTTP Error 500.0 - Internal Server Error
The page cannot be displayed because an internal server error has occurred.
</fieldset>
<fieldset><legend>Detailed Error Information</legend>
Module
IsapiModule
Notification
ExecuteRequestHandler
Handler
cfmHandler
Error Code
0x800700c1
Requested URL
http://127.0.0.1:80/CFIDE/administrator/index.cfm
Physical Path
C:\ColdFusion10\cfusion\wwwroot\CFIDE\administrator\index.cfm
Logon Method
Anonymous
Logon User
Anonymous
Failed Request Tracing Log Directory
C:\inetpub\logs\FailedReqLogFiles
</fieldset>
The supplied path C:\inetpub\logs\FailedReqLogFiles is a nonresponsive link but there are .xml files created in that subdirectory such as C:\inetpub\logs\FailedReqLogFiles\W3SVC1\fr000015.xml which contains this information:
Request Diagnostics for http://127.0.0.1:80/CFIDE/administrator/index.cfm
STATUS_CODE 500, 46 ms, GET (2012-8-16, 16:59:5:778)
Request
Summary
Request
Details
Compact
View
Complete
Request Trace
Filter
Notifications
Module
Notifications
Performance
View
Authentication
Authorization
ASP.Net
Page Traces
Custom
Module Traces
FastCGI
Module
<fieldset>
<legend>-Request Summary</legend>
Site
1
Process
8472
Failure Reason
STATUS_CODE
Trigger Status
500
Final Status
500
Time Taken
46 msec
Url
http://127.0.0.1:80/CFIDE/administrator/index.cfm
App Pool
DefaultAppPool
Authentication
anonymous
User from token
NT AUTHORITY\IUSR
Activity ID
{00000000-0000-0000-6F00-0080000000FB}
</fieldset>
No.
EventName
Details
Time
1.
i
GENERAL_REQUEST_START
SiteId="1", AppPoolId="DefaultAppPool", ConnId="1610612845", RawConnId="0", RequestURL="http://127.0.0.1:80/CFIDE/administrator/index.cfm", RequestVerb="GET"
16:59:05.778
2.
GENERAL_SET_REQUEST_HEADER
HeaderName="AspFilterSessionId", HeaderValue="", Replace="true"
16:59:05.778
3.
i
GENERAL_ENDPOINT_INFORMATION
RemoteAddress="127.0.0.1", RemotePort="50289", LocalAddress="127.0.0.1", LocalPort="80"
16:59:05.778
4.
i
GENERAL_REQUEST_HEADERS
Headers="Cache-Control: max-age=0 Connection: keep-alive Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding: gzip, deflate Accept-Language: en-us,en;q=0.5 Host: 127.0.0.1 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:13.0) Gecko/20100101 Firefox/13.0.1 DNT: 1 "
16:59:05.778
5.
i
GENERAL_GET_URL_METADATA
PhysicalPath="", AccessPerms="517"
16:59:05.778
6.
i
HANDLER_CHANGED
OldHandlerName="", NewHandlerName="cfmHandler", NewHandlerModules="IsapiModule", NewHandlerScriptProcessor="C:\ColdFusion10\config\wsconfig\1\isapi_redirect.dll", NewHandlerType=""
16:59:05.778
7.
i
USER_SET
AuthType="", UserName="", SupportsIsInRole="true"
16:59:05.778
8.
i
GENERAL_SEND_CUSTOM_ERROR
HttpStatus="500", HttpSubStatus="0", FileNameOrURL="500.htm"
16:59:05.824
9.
i
GENERAL_FLUSH_RESPONSE_START
16:59:05.824
10.
i
GENERAL_RESPONSE_HEADERS
Headers="Cache-Control: private Content-Type: text/html; charset=utf-8 Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET "
16:59:05.824
11.
GENERAL_RESPONSE_ENTITY_BUFFER
Buffer="<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.5 Detailed Error - 500.0 - Internal Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;} pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-} legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin- border-border-border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;font-size:1em;} a:link,a:visited{color:#007EFF;font-weight:bold;} a:hover{text-decoration:none;} h1{font-size:2.4em;margin:0;color:#FFF;} h2{font-size:1.7em;margin:0;color:#CC0000;} h3{font-size:1.4em;margin:10px 0 0 0;color:#CC0000;} h4{font-size:1.2em;margin:10px 0 5px 0; }#header{width:96%;margin:0 0 0 0;padding:6px 2% 6px 2%;font-family:"trebuchet MS",Verdana,sans-serif; color:#FFF;background-color:#5C87B2; }#content{margin:0 0 0 2%;} .summary-container,.content-container{background:#FFF;width:96%;margin-padding:10px;} .config_source{background:#fff5c4;} .content-container p{margin:0 0 10px 0; }#details-left{width:35%;float:left;margin-right:2%; }#details-right{width:63%;float:left; }#server_version{width:96%;_height:1px;min-height:1px;margin:0 0 5px 0;padding:11px 2% 8px 2%;color:#FFFFFF; background-color:#5A7FA5;border-bottom:1px solid #C1CFDD;border-font-weight:normal; font-size:1em;color:#FFF;text-align:right; }#server_version p{margin:5px 0;} table{margin:4px 0 4px 0;width:100%;border:none;} td,th{vertical-align:top;padding:3px 0;text-align:left;font-weight:bold;border:none;} th{width:30%;text-align:right;padding-right:2%;font-weight:normal;} thead th{background-color:#ebebeb;width:25%; }#details-right th{width:20%;} table tr.alt td,table tr.alt th{background-color:#ebebeb;} .highlight-code{color:#CC0000;font-weight:bold;font-style:italic;} .clear{clear:both;} .preferred{padding:0 5px 2px 5px;font-weight:normal;background:#006633;color:#FFF;font-size:.8em;} --> </style> </head> <body> <div id="header"><h1>Server Error in Application "DEFAULT WEB SITE"</h1></div> <div id="server_version"><p>Internet Information Services 7.5</p></div> <div id="content"> <div class="content-container"> <fieldset><legend>Error Summary</legend> <h2>HTTP Error 500.0 - Internal Server Error</h2> <h3>The page cannot be displayed because an internal server error has occurred.</h3> </fieldset> </div> <div class="content-container"> <fieldset><legend>Detailed Error Information</legend> <div id="details-left"> <table border="0" cellpadding="0" cellspacing="0"> <tr class="alt"><th>Module</th><td>IsapiModule</td></tr> <tr><th>Notification</th><td>ExecuteRequestHandler</td></tr> <tr class="alt"><th>Handler</th><td>cfmHandler</td></tr> <tr><th>Error Code</th><td>0x800700c1</td></tr> </table> </div> <div id="details-right"> <table border="0" cellpadding="0" cellspacing="0"> <tr class="alt"><th>Requested URL</th><td>http://127.0.0.1:80/CFIDE/administrator/index.cfm</td></tr> <tr><th>Physical Path</th><td>C:\ColdFusion10\cfusion\wwwroot\CFIDE\administrator\index.cfm</td></tr> <tr class="alt"><th>Logon Method</th><td>Anonymous</td></tr> <tr><th>Logon User</th><td>Anonymous</td></tr> <tr class="alt"><th>Failed Request Tracing Log Directory</th><td><a href="file://C:\inetpub\logs\FailedReqLogFiles">C:\inetpub\logs\FailedReqLogFiles</a></td></tr> </table> <div class="clear"></div> </div> </fieldset> </div> <div class="content-container"> <fieldset><legend>Most likely causes:</legend> <ul> %09<li>IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred.</li> %09<li>IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly.</li> %09<li>IIS was not able to process configuration for the Web site or application.</li> %09<li>The authenticated user does not have permission to use this DLL.</li> %09<li>The request is mapped to a managed handler but the .NET Extensibility Feature is not installed.</li> </ul> </fieldset> </div> <div class="content-container"> <fieldset><legend>Things you can try:</legend> <ul> %09<li>Ensure that the NTFS permissions for the web.config file are correct and allow access to the Web server's machine account.</li> %09<li>Check the event logs to see if any additional information was logged.</li> %09<li>Verify the permissions for the DLL.</li> %09<li>Install the .NET Extensibility feature if the request is mapped to a managed handler.</li> %09<li>Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click <a href="http://go.microsoft.com/fwlink/?LinkID=66439">here</a>. </li> </ul> </fieldset> </div> <div class="content-container"> <fieldset><legend>Links and More Information</legend> This error means that there was a problem while processing the request. The request was received by the Web server, but during processing a fatal error occurred, causing the 500 error. <p><a href="http://go.microsoft.com/fwlink/?LinkID=62293&IIS70Error=500,0,0x800700c1,7601">View more information »</a></p> <p>Microsoft Knowledge Base Articles:</p> <ul><li>294807</li></ul> </fieldset> </div> </div> </body> </html> "
16:59:05.824
12.
i
GENERAL_FLUSH_RESPONSE_END
BytesSent="6414", ErrorCode="The operation completed successfully. (0x0)"
16:59:05.824
13.
i
GENERAL_REQUEST_END
BytesSent="6414", BytesReceived="348", HttpStatus="500", HttpSubStatus="0"
16:59:05.824
+Expand All <fieldset> <legend>Errors & Warnings</legend>
</fieldset>
There is nothing under Errors & Warnings. Dead Stop. Nothing Else To Do except Ask For Help. Hoping someone here can provide some guidance.
TIAHi
Can you please try setting up full persmission in the security properties for everyone on the wsconfig folder C:\ColdFusion10\config\wsconfig and restart ColdFusion Server.
Swaraj -
SharePoint 2013 Configuration Wizard failure while joining a WFE to the existing server farm.
Dears,
I've been troubleshooting an issue while trying to join a new WFE server to an existing SharePoint 2013 farm.
Issue Description:
When we run the wizard it runs for almost 30 to 45 minutes on the step 3 itself and eventually fails at the end with an error message "Failed to connect to the configuration Database..... Value doesn't fall within the expected range"
First I thought this is a connectivity issue with the config DB and monitored the complete operation very closely after checking the permissions and SQL server connection and happened to see that the server was able to connect to the farm and all the web
applications and the related solutions were pushed to the server and apparently the failure of the Wizard at below point: Followed by the error, all web sites and solutions were retracted and a complete roll back happens.
Can someone pls help me here at the earliest as I'm stuck ???
0
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:41.62 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:45.09 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:45.09 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:48.52 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:48.52 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:48.52 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:48.52 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:48.54 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:48.54 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:48.54 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:48.54 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx75
Unexpected Reached the retry limit for committing IIS configuration changes, the operation must be rerun.
02/19/2015 11:36:48.65 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology eru1
Medium Released mutex 'Global\Microsoft.SharePoint.SPIisProvisioningLock'
02/19/2015 11:36:48.65 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology aj4j4
Unexpected Joining Farm failed. The exception is Value does not fall within the expected range. StackTrace is at Microsoft.Web.Administration.Interop.AppHostWritableAdminManager.CommitChanges()
at Microsoft.Web.Administration.Configuration.CommitChanges() at Microsoft.Web.Administration.ConfigurationManager.CommitChanges() at Microsoft.Web.Administration.ServerManager.CommitChanges() at Microsoft.SharePoint.Administration.SPIisServerManager.CommitChanges(ApplyChanges
applyChanges) at Microsoft.SharePoint.Administration.SPIisProvisioningAssistant.ProvisionApplicationPool(String name, SecurityIdentifier sid, String password, SPIisApplicationPoolSettings settings) at Microsoft.SharePoint.Administration.SPIisManager.ProvisionApplicationPool(String
name, SecurityIdentifier sid, SecureString password, SPIisApplicationPoolSettings settings) at Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool.ProvisionLocal(SPIisWebServiceApplicationPoolProvisioningOptions options)
at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.ProvisionApplicationInstance() at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision() at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
02/19/2015 11:36:48.65 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 88ah
High Unjoining the farm.
BR,
MukeshHi Pradeep, this wasn't due to any permission issue.. I was trying with the farm account which is a local admin group member as well as being a member of IIS_WPG.. on a continues investigation happened to find that the IIS config file was corrupted and which
encountered issues in the creation of app pool.. I had to tweak around some settings with the config file by considering the other WFE as a reference.. this actually fixed the issue..
BR,
Mukesh
Regards Mukesh -
Alternate access mapping and binding in IIS for NLB nodes(2)
Hello All,
We have configured NLB for 2 nodes( 1 is App and WFE1 and 2 is WFE2).
here, we have given NLB host name to the users to browse. but, do we need to configure any thing in alternate access mapping and in IIS bindings, if yes, Please elaborate step by step please.
Thanks in advance
NLB host name and IP: abc.ap.company.com /10.11.12.95
Node1 server: abc.appri.company.com / 10.11.12.93
Node2 server: abc.appsec.company.com / 10.11.12.94
how to do this.
NARLAAssuming you configured the web application to use the URL http://abc.ap.company.com there is no additional IIS configuration needed on the servers.
If you're interested in accessing a specific server you can create a hostfile entry on your client machine that abc.ap.company.com to one of the two servers.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights -
ColdFusion MX7 on Windows Server 2008 R2 / IIS 7.5
After configuration, have developed the ColdFusion MX7 installation to Windows Server 2008 R2 64 bits and System for the installation of Office 2000, but in running the following code segment, abnormal.
code:
<cftry>
<cfobject type="COM" name="PPT"
class="PowerPoint.Application" action="CREATE">
<cfset variables.stLocalTemp=StructNew()>
<cfset Pres = PPT.Presentations.Open
("abcd.ppt", true, False, False)>
<cfset resultjx=Pres.Close()>
<cfset resultjx=PPT.Quit()>
<cfset Pres = "">
<cfset PPT = "">
<cfcatch>
<cfoutput>Error in PPT2JPG CFC:
#cfcatch.message# #cfcatch.detail#</cfoutput>
</cfcatch>
</cftry>
Exception:
An exception occurred when executing a Com method. The cause of this
exception was that: AutomationException: 0x80004005 - PowerPoint ??¨′
ò?a′???t?£ in 'Microsoft PowerPoint 2000'.
Who knows the cause of abnormal, do me a favor.Hi Peter,
Please check if the IPv4 Address and Domain Restrictions feature can help you to achieve target. For more details,
please refer to following article.
FTP IPv4 Address and Domain Restrictions
Page
In addition, I agree with SenneVL. This issue seems to be more related to IIS configuration. As SenneVL suggested,
you would post your question in IIS Forum. I believe we will get a better assistance there.
Hope this helps.
Best regards,
Justin Gu
Maybe you are looking for
-
How can I copy a track from one session to another?
I want to copy an entire track (strip setting and audio/midi) from one session to another. The only option I can seem to find is to bounce or export as audio. Is there any way to do this besides copy/paste the strip setting, copy/paste the software i
-
Could not get Custom screen in me21n after implementing Badi ME_GUI_PO_CUST
Hi., I created implementation for the badi ME_GUI_PO_CUST... but i could not get the Tab and screen in header tab. also used below link in the forum to correct the issue ....but dint help me . Custom screen not displaying using BADI ME_GUI_PO_CUST
-
BIG DECIMAL DATATYPE ISSUE IN JDEV 10.1.3.2 ADF BC
I am developing a small application on mysql db. in one of my entry screens i have to input numeric data upto a 4 decimal places. My project settings are SQL92 and JAVA types. My dataype for the numeric field in db is double(17,4) at entity level i h
-
LR Preferences - Data Entry Bug?
Can anyone supply me with a list, or cite to a list, of preferences in the file "com.adobe.Lightroom2.plist?" I am asking this because no one answered my question about the space bar zoom toggle problem I get from time to time. It stops working every
-
Upgrade from CRM 6.0 to CRM 7.0 without upgrading MSA
Hi all, we are currently running CRM 6.0 with the Mobile Client for a field sales group of 2000 users and we have some plans to move to the latest release being CRM 7.0. As upgrading MSA for 2000 users is extensive task we would like to know if it is