"Illegal angle situation. Only the Main Video Angle will be simulated."
Hi y'all!
Trying to export my .mov out of DVD Studio pro and getting the message 'Illegal angle situation. Only the Main Video Angle will be simulated.' when I try to simulate. There's no video in the V2 track so guessing I need to fix up the GOP or angles, but I don't know where or what to change them to.
Project is an hour long, NTSC, 16:9, 29.97fps
Check your preferences for Track - check the Fix Invalid Markers on Build box. Should do the trick, though you may need to quit DVD SP and reopen to make sure the changes to preferences "stuck." It sounds like you are using only one video track and do not have multiple angles (video), audio or other extras, just a straight m2v and audio track. There are some other things that can cause the issue, like using VBR when using multiple video tracks. But see if this takes care of it.
Similar Messages
-
I dont want to the people in the main video to become transpartent (ghostly) I only want that to happen with the copy that I am overlaping. The copy will not be at the same starting point as the original, it will be slightly ahead. Everything ive tried has left the video lighter or darker then the original and it looks weird, it was used with a tripod so nothing changes in the video except for the posiioning of the people. I want to have like a trailing affect following the people, like you can get with your cursor on some computers its like its lagging behind? Its hard to explain, I hope this made some sense.. any suggestions would be great thanks.
Since you are disolving two shots together (rather than compositing or keying) it seems like you will always have some slight noticeable opacity as you are effectively bleinding two shots together at 50% opacity each. There is no way to maintian 100% short of keying or compositing. However with the background being the same in both shots the opacity shift should be very minimal.
Although you might consider trying the built in trailing effect in the filters browser and see how it looks, it might achive the effect you are attempting better than blending the two shots. -
I am trying to make only the main content editable in a template.
I thought I had only the main content area editable, but when I made a change to the menu bar in the template it didn't carry over ( I did try update) and then I realized my whole page is editable on the page where I applied the template. Can someone please review and tell me what I might have done wrong.
template
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<!-- TemplateBeginEditable name="doctitle" -->
<title>Untitled Document</title>
<!-- TemplateEndEditable -->
<link href="../main.css" rel="stylesheet" type="text/css">
<link href="../SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css">
<link href="../SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css">
<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<script type="text/javascript">
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
<!-- TemplateBeginEditable name="head" -->
<!-- TemplateEndEditable -->
</head>
<body onLoad="MM_preloadImages('../images/logo/shop_small_1.png','../images/home_page/plantatio n_closed.jpg')">
<div id="outer_container">
<div id="inner_conatiner">
<div id="header">
<script type="text/javascript">
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
</script>
<table width="1024" border="0" cellspacing="0" cellpadding="5">
<tr>
<td rowspan="2"><img src="../images/logo/bed_guy_logo.gif" alt="bedguy logo" width="195" height="116" class="logo_images"></td>
<td colspan="2" class="sleep_better">Helping Saint Louis<br>
Sleep Better Since 2000</td>
<td rowspan="2"><a href="../contact_forms/free_sticker_please.html" class="shop_small" onMouseOver="MM_swapImage('shop small','','../images/logo/shop_small_1.png',1)" onMouseOut="MM_swapImgRestore()"><img src="../images/logo/logo_sticker_1.jpg" alt="shop small STL" width="225" height="105" id="shop small"></a></td>
</tr>
<tr>
<td class="address"><a href="#">6431 Hampton Ave<br>
Saint Louis, MO 63109<br>
314-678-9100</a></td>
<td class="address"><a href="#">4666 McRee Ave<br>
Saint Louis, MO 63110<br>
314-772-9999</a></td>
</tr>
</table>
</div>
<div id="nav_bar_top">
<ul id="MenuBar1" class="MenuBarHorizontal">
<li><a href="#">browse</a> </li>
<li><a class="MenuBarItemSubmenu" href="#">bedroom</a>
<ul>
<li><a class="MenuBarItemSubmenu" href="#">Platform Beds</a>
<ul>
<li><a href="#">Item 3.1.1</a></li>
<li><a href="#">Item 3.1.2</a></li>
</ul>
</li>
<li><a href="#">Case Goods</a></li>
<li><a href="#">Platform Accessories</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">futons</a>
<ul>
<li><a href="#">wallhuggers</a></li>
<li><a href="#">premium frames</a></li>
<li><a href="#">standard frames</a></li>
<li><a href="#">economy frames</a></li>
<li><a href="#">futon mattresses</a></li>
<li><a href="#">futon accessories</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">youth</a>
<ul>
<li><a href="#">Loft Beds</a></li>
<li><a href="#">BunkBeds</a></li>
<li><a href="#">Storage & Trundle Beds</a></li>
<li><a href="#">Daybeds</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">Mattresses</a>
<ul>
<li><a href="#">Pocket Coil</a></li>
<li><a href="#">Memory Foam</a></li>
<li><a href="#">Pillowtop</a></li>
<li><a href="#">Plush/Firm</a></li>
<li><a href="#">Best Value</a></li>
<li><a href="#">Double Sided</a></li>
<li><a href="#">Youth</a></li>
<li><a href="#">Misc </a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">bed rails</a>
<ul>
<li><a href="#">Basic Frames</a></li>
<li><a href="#">Hook-On </a></li>
<li><a href="#">Bolt-On</a></li>
<li><a href="#">Specialty</a></li>
</ul>
</li>
</ul>
</div>
<div id="nav_bar_left">
<ul id="MenuBar2" class="MenuBarVertical">
<li><a href="#">browse</a></li>
<li><a href="#">Specials & Closeout</a></li>
<li><a href="#">about us</a></li>
<li><a href="#">delivery</a></li>
<li><a href="#">FAQ</a></li>
<li><a href="#">hours & locations</a></li>
<li><a href="#">Our manufacturers</a></li>
<li><a href="#">photo gallery</a></li>
<li><a href="#">contact us</a></li>
</ul>
</div>
<div id="hours"> <!-- #BeginLibraryItem "/Library/hours.lbi" --><strong class="underline">6431 Hampton</strong> <br>
Tues-Fri 11-7<br>
Sat 11-6<br>
Sun 12-3<br>
<br>
<strong class="underline">4666 McRee </strong><br>
Tues-Fri 10-7<br>
Sat 10-6<br>
Sun 12-3<!-- #EndLibraryItem --><br>
<br>
</div>
<div id="main_content"><!-- TemplateBeginEditable name="main_content" -->main_content<!-- TemplateEndEditable --><table width="800" border="1" cellspacing="0" cellpadding="5">
<tr>
<td><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('home_futon','','../images/home_page/plantation_closed.jpg',1)" ><img src="../images/home_page/plantation_open.jpg" alt="futon open and closed" width="150" height="145" id="home_futon"></a></td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
</table>
</div>
<div id="footer">The BedGuy ©2000-2014<br>
Contact Us</div>
</div>
</div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
var MenuBar2 = new Spry.Widget.MenuBar("MenuBar2", {imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>
page with template applied
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<!-- TemplateBeginEditable name="doctitle" -->
<title>Untitled Document</title>
<!-- TemplateEndEditable -->
<link href="main.css" rel="stylesheet" type="text/css">
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css">
<link href="SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css">
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<script type="text/javascript">
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
<!-- TemplateBeginEditable name="head" -->
<!-- TemplateEndEditable -->
</head>
<body onLoad="MM_preloadImages('images/logo/shop_small_1.png','images/home_page/futon_closed.jp g','images/home_page/Clove Casegoods Dark Chocolate (Metal Knobs).jpg','images/home_page/sasparilla_chocolate_trundle.jpg','images/home_page/BR12_TE _Stack_06.jpg','images/home_page/link_spring.jpg')">
<div id="outer_container">
<div id="inner_conatiner">
<div id="header">
<script type="text/javascript">
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
</script>
<table width="1024" border="0" cellspacing="0" cellpadding="5">
<tr>
<td rowspan="2"><img src="images/logo/bed_guy_logo.gif" alt="bedguy logo" width="195" height="116" class="logo_images"></td>
<td colspan="2" class="sleep_better">Helping Saint Louis<br>
Sleep Better Since 2000</td>
<td rowspan="2"><a href="contact_forms/free_sticker_please.html" class="shop_small" onMouseOver="MM_swapImage('shop small','','images/logo/shop_small_1.png',1)" onMouseOut="MM_swapImgRestore()"><img src="images/logo/logo_sticker_1.jpg" alt="shop small STL" width="225" height="105" id="shop small"></a></td>
</tr>
<tr>
<td class="address"><a href="#">6431 Hampton Ave<br>
Saint Louis, MO 63109<br>
314-678-9100</a></td>
<td class="address"><a href="#">4666 McRee Ave<br>
Saint Louis, MO 63110<br>
314-772-9999</a></td>
</tr>
</table>
</div>
<div id="nav_bar_top">
<ul id="MenuBar1" class="MenuBarHorizontal">
<li><a href="#">browse</a> </li>
<li><a href="#" class="MenuBarItemSubmenu">futons</a>
<ul>
<li><a href="#">wallhuggers</a></li>
<li><a href="#">premium frames</a></li>
<li><a href="#">standard frames</a></li>
<li><a href="#">economy frames</a></li>
<li><a href="#">futon mattresses</a></li>
<li><a href="#">futon accessories</a></li>
</ul>
</li>
<li><a class="MenuBarItemSubmenu" href="#">bedroom</a>
<ul>
<li><a class="MenuBarItemSubmenu" href="#">Platform Beds</a>
<ul>
<li><a href="#">Item 3.1.1</a></li>
<li><a href="#">Item 3.1.2</a></li>
</ul>
</li>
<li><a href="#">Case Goods</a></li>
<li><a href="#">Platform Accessories</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">youth</a>
<ul>
<li><a href="#">Loft Beds</a></li>
<li><a href="#">BunkBeds</a></li>
<li><a href="#">Storage & Trundle Beds</a></li>
<li><a href="#">Daybeds</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">Mattresses</a>
<ul>
<li><a href="#">Pocket Coil</a></li>
<li><a href="#">Memory Foam</a></li>
<li><a href="#">Pillowtop</a></li>
<li><a href="#">Plush/Firm</a></li>
<li><a href="#">Best Value</a></li>
<li><a href="#">Double Sided</a></li>
<li><a href="#">Youth</a></li>
<li><a href="#">Misc </a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">bed rails</a>
<ul>
<li><a href="#">Basic Frames</a></li>
<li><a href="#">Hook-On </a></li>
<li><a href="#">Bolt-On</a></li>
<li><a href="#">Specialty</a></li>
</ul>
</li>
</ul>
</div>
<div id="nav_bar_left">
<ul id="MenuBar2" class="MenuBarVertical">
<li><a href="#">browse</a></li>
<li><a href="#">Specials & Closeout</a></li>
<li><a href="#">about us</a></li>
<li><a href="#">delivery</a></li>
<li><a href="#">FAQ</a></li>
<li><a href="#">hours & locations</a></li>
<li><a href="#">Our manufacturers</a></li>
<li><a href="#">photo gallery</a></li>
<li><a href="#">contact us</a></li>
</ul>
</div>
<div id="hours"> <!-- #BeginLibraryItem "/Library/hours.lbi" --><strong class="underline">6431 Hampton</strong> <br>
Tues-Fri 11-7<br>
Sat 11-6<br>
Sun 12-3<br>
<br>
<strong class="underline">4666 McRee </strong><br>
Tues-Fri 10-7<br>
Sat 10-6<br>
Sun 12-3<!-- #EndLibraryItem --><br>
<br>
</div>
<div id="main_content"><!-- TemplateBeginEditable name="main_content" --> <!-- TemplateEndEditable -->
<table width="800" cellpadding="10">
<tr>
<td><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('futon','','images/home_page/futon_closed.jpg',1)"><img src="images/home_page/futon_open.jpg" alt="take me to futon home page" width="250" height="175" id="futon"></a></td>
<td><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('bedroom','','images/home_page/Clove Casegoods Dark Chocolate (Metal Knobs).jpg',1)"><img src="images/home_page/Tamarind Bed Full Cherry K-Series w Cinnamon Storage Drawers opened.jpg" alt="platform bed and casegoods" width="250" height="175" id="bedroom"></a></td>
<td><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('youth','','images/home_page/sasparilla_chocolate_trundle.jpg', 1)"><img src="images/home_page/Scribbles Twin Twin Medium Oak w Drawer opened.jpg" alt="bunkbeds and trundle beds" width="250" height="175" id="youth"></a></td>
</tr>
<tr>
<td class="home_page_table_words">FUTONS</td>
<td class="home_page_table_words">BEDROOM</td>
<td class="home_page_table_words">YOUTH</td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('mattresses','','images/home_page/BR12_TE_Stack_06.jpg',1)"><im g src="images/home_page/BR13_Pyramid_Stack_R.jpg" alt="mattresses" width="250" height="175" id="mattresses"></a></td>
<td><a href="#" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('bedframes','','images/home_page/link_spring.jpg',1)"><img src="images/home_page/classic_frame.jpg" alt="bedframes" width="250" height="175" id="bedframes"></a></td>
<td><img src="images/home_page/futon_closed.jpg" width="250" height="175"></td>
</tr>
<tr>
<td class="home_page_table_words">MATTRESSES</td>
<td class="home_page_table_words">BED FRAMES</td>
<td class="home_page_table_words">SPECIALTY AND MISC</td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
</table>
</div>
<div id="footer">The BedGuy ©2000-2014<br>
Contact Us</div>
</div>
</div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
var MenuBar2 = new Spry.Widget.MenuBar("MenuBar2", {imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>Go to File > New page from template.
Select your Template.dwt file from the list and hit Create.
Save your child page.
Nancy O. -
My fire fox download helper not detected current video on you tube. It's always shows only the first video which i was downloaded.pls help
You need to refresh the page (F5) to update the items in the download menu. Apparently YouTube refreshes the page in such a way that the extension doesn't gets notified, so you need to refresh the page manually if you want to download a media file from this page.
-
For the last 10 days I have been unable to open the Mail account on my eMac (MacOS10.4.11). When I click on the icon in the Dock the only option I get is "Force quit" and the main Mail bar will not open any choice. Any ideas?
You can setup Mail for iCloud on the eMac.
Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password -
Flash plays the ad video, but cannot make the switch to the main video.
Flash plays the advertisement video that runs prior to the main video, but then always displays "We're sorry, an unexpected error has occurred. Please try again or select a different video." when it should automatically switch to playing the main video - IE8 has no problem seamlessly switching from playing the ad video to playing the main video. This is a consistent problem across various websites with ads playing before videos.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
Error msg Could not find the main class.Program will exit. in jar execution
Hello,
I have created a jar so that I can used it in the webapp.
but when I click on it it says "Could not find the main class.Program will exit."
I searched a lot in the net and found that it has to do with the manifest file.
I even updated the manifest file using the command "jar umf main.txt filefolderupload.jar" with the class name mention along with the package heirarchy.
(pakage heirarchy in /,\ and .)
I am using JDK 1.5 . and have Updated JRE 1.6.
Also tried with extending the class with JApplet, but in vain.
Kindly help me in the above mention issue.
tia,
SarwaThis post hints at a number of misunderstandings on your part, and raises a couple of important questions.
Note that this 'simple question' has a complicated answer. Given the complexity of it, it might pay to add Dukes to it, ..a lot of Dukes.
The important questions are.
1) Does this file/directory uploader need to provide the end-user with a file dialog in which they can choose a local directory to upload, or will a multi-file chooser do?
2) Does this uploader need to upload to foreign sites, or does it upload back to its own server?
Looking at this table I prepared to describe the [uploader/local file access|http://pscode.org/test/uploader/fileuploader.html] possibilities, if the answers to the questions are 'multi-file chooser will do' and 'home site only', the best option is a sandboxed app. launched using webstart (JNLP) - option 5. If either of those questions go the other way, option 6 (digitally signed with extended permissions) is needed. -
HT201272 I downloaded a song but only the first 30 seconds will play. How do I fix this?
I downloaded a song but only the first 30 seconds will play. How do I fix this?
Welcome to the Apple Community.
Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer. -
Execute jar file: "could not find the main class" program will terminate
Hey,
I am new to Java. I have started to make a small java program which supposed to help me at my studies to lean the Dominic Memory System. I have used the latest version of Netbeans 5.5.1 to build my program in. I have two problems which I cannot figure out how to solve, please help me.
The first problem is that the java script I have made works when I compile it in Netbeans, but when I create a Jar file it does not work. I receive a pop up message in windows ?could not find the main class program will terminate? when I execute the jar file.
The second problem I have is that I need to compare the strings generated by the "numbers" and "TIP" and if the numbers is not identical the numbers in the ?Center? JPanel should be highlighted as red.
If anyone would like to clean up the code I would be pleased. I have copied quite a lot from anyone because of my one lack of knowledge.
* GoListener.java
* Created on 12. september 2007, 21:48
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package grandmaster;
import java.awt.event.*;
import javax.swing.*;
import java.util.Vector;
import java.util.StringTokenizer;
import java.awt.Color;
* @author Computer
public class GoListener implements ActionListener {
private JTextField viewer;
private JTextField TIP;
private JTextField freq;
private JTextField max_num;
private Vector numbers;
public GoListener(JTextField j,JTextField k, JTextField m, JTextField f, Vector n) {
freq = f;
max_num = m;
viewer = j;
numbers = n;
TIP = k;
public void actionPerformed(ActionEvent e){
int time = Integer.valueOf(max_num.getText());
int f = Integer.valueOf(freq.getText());
if (e.getActionCommand() == "GO") {
for (int i = 0; i< time;++i) {
int number=0;
number = (int)Math.floor(100*Math.random());
while(number>51){
number = (int)Math.floor(100*Math.random());
if(number<=9){
viewer.setText(" "+"0" + String.valueOf(number) + " ");
} else{
viewer.setText(" " + String.valueOf(number) + " ");
viewer.paintImmediately(viewer.getBounds());
numbers.add(number);
try {
Thread.sleep(f*1000);
} catch (Exception exp) {
viewer.setText(" XX ");
viewer.paintImmediately(viewer.getBounds());
if (e.getActionCommand() == "VIEW") {
try {
//int numb = Integer.valueOf( TIP.getText() ).intValue();
StringTokenizer tokenizer = new StringTokenizer(TIP.getText(), " ");
String[] split = null;
int tokenCount = tokenizer.countTokens();
if (tokenCount > 0) {
split = new String[tokenCount];
for (int current = 0; current < tokenCount; current++) {
split[current] = tokenizer.nextToken();
viewer.setText(" " + String.valueOf(numbers) + " ");
// k=numbers(1);
/*while(c<i){
String.valueOf(k).equals(split[1]);
c++;
TIP.setText(" " + split[2] + " ");
} catch (Exception exp) {
try {
//string testit = numb.toString();
//String str = "" + numb;
//viewer.setText(str);
//viewer.setText(numbers.toString());
numbers.clear();
} catch (Exception exp) {
* Main.java
* Created on 12. september 2007, 21:07
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package grandmaster;
import java.util.Vector;
import javax.swing.*;
import java.awt.event.*;
import javax.swing.JButton;
import java.awt.*;
import grandmaster.GoListener;
* @author Computer
public class Main extends JFrame {
private JTextField viewer;
public JTextField TIP;
// private TextInputPanel TIP;
private Vector numbers;
/** Creates a new instance of Main */
public Main() {
numbers = new Vector();
JPanel p = new JPanel(new GridLayout(0,4));
JButton go = new JButton();
JButton view_num = new JButton();
go.setText("Go!");
go.setVisible(true);
go.setActionCommand("GO");
view_num.setText("VIEW");
view_num.setVisible(true);
view_num.setActionCommand("VIEW");
JTextField max_num = new JTextField();
max_num.setText("5");
JTextField freq = new JTextField();
freq.setText("1");
viewer = new JTextField();
viewer.setText("XX");
TIP = new JTextField("");
p.add(go);
p.add(max_num);
p.add(freq);
p.add(view_num);
getContentPane().add(p,BorderLayout.NORTH);
getContentPane().add(viewer,BorderLayout.CENTER);
getContentPane().add(TIP,BorderLayout.SOUTH);
setSize(200,200);
GoListener g = new GoListener(viewer,TIP,max_num, freq, numbers);
go.addActionListener(g);
view_num.addActionListener(g);
* @param args the command line arguments
public static void main(String[] args) {
// TODO code application logic here
Main window = new Main();
window.setVisible(true);
}NetBeans questions should be posted to the NB site. It has mailing lists and associated forums.
This tutorial from the NB site addresses running programs outside of NB
http://www.netbeans.org/kb/articles/javase-deploy.html
When you compare objects, use ".equals()" and reserve == for comparing values. -
Error:-could not find the main class programe will exit(Java virtual mach)
Hi,
i changed the mainfest file for an executive jar file(judge.jar) using the command on dos :-"jar cvfm judge.jar c:\judge\MAINFEST.MF -C judge/ ." , but when i run this jar file again after making changes in mainfest file it is not working. an error encounter like "could not find the main class programe will exit how to solve"(Java virtual machine launcher).please suggest me how to solve this error.
Thanks
Ashwani GuptaHi,
mainfest file has a entry like "main -class: judge.repository.corpus"
please tell me the solution of this error i am doing internship in national university of singapore......and my project is related to data mining.I am using judge.jar when i extract this jar files i saw there was no main-class in manifest file so i change it and make it again jar file using dos command.please suggest me how i can reomove this error.
Thanks in advance.
Ashwani -
Java Virtual Machine Launcher could not find the main class - program will
I have installed J2SE and followed all the instructions but upon restarting the PC I get a dialogue box with the messege Java Virtual Machine Launcher could not find the main class - program will exit.
I have tried multiple times un-installing and re-intalling this but i still get the messege when i restart windows.
Can anyone offer any suggestions as to what i may be doing wrong.
When I do the verify installation I get the congtratulations you have the latest Java Installed.
HelpSomething is being automatically started when the pc starts. Assuming Windows, to see what it is, learn to use the msconfig program:
http://www.google.com/search?q=how+to+use+msconfig
Apparently, whatever it is, it's not correctly configured. -
My iPad will not play sounds on certain applications. ie: if I click on a video from FB sound will not play. If I go to YouTube and play the same video sound will play. Also certain games will no longer play sounds. They always played sounds but now won't now. I just went to my churches web site to watch live service and again no sound. I grabbed my dads iPad and the sound works fine.
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
Multiple audio sources but only the main one appears.
Okay so I am doing games commentary and have recorded videos that feature in-game sound and also my commentary from a mic. When I play the videos I can hear myself but m commentary doesn't appear when I have the clips ready for editing in Adobe Premiere Elements 11... Please help!
mclaren
Premiere Elements 11 on what computer operating system.
When you import a file into Premiere Elements, it presents in the workspace as your video (Video Track 1) linked to audio which should be a composite
of the file's audio (audio 1). The audio should enter as composite and exports as a composite.
Does the camera generate 3 separate files, video only, in-game sound only, and mic sound only?
There may be an easy solution involving an "extract audio stream" in Windows Explorer". The following video tutorial was
done with a version of Premiere, but the Windows Explorer principle is what I want you to explore for your purposes.
https://www.youtube.com/watch?v=XUDJD0hDlLI
Please see if any of that extract audio stream principle can be applied to your situation.
Looking forward to your results.
ATR -
Multi-camera real-time editing skips the main video window ahead about a minute since update.
I'm working on a 2-camera edit, which I've done numerous multi-camera edits on this machine before with no problem, but now when I am playing back the footage with the multi-camera window and select the other camera, the footage in the main window (the one that shows the footage going on the timeline) jumps ahead about a minute. It doesn't matter which camera is choosen, it causes either to jump ahead about a minute in that main window making it almost impossible to edit.
The footage doesn't jump ahead in the smaller, individual camera windows on the left, just the main window. I'm not 100% sure, but I believe this problem just started occuring since the most recent update to Premiere Pro CC. I installed that update last night and wasn't having this problem prior to that.
How can I remove the most recent update to test this theory?
Specs:
Premiere Pro CC 7.2.0 (46)
Win 7 64-bit
2x NVidia GTX 560 Ti
16GB RAM
120GB SSD (OS)
2TB RAID 0 (Storage)Kendall,
Great video showing exactly what you're experiencing. Thanks! Wow, something definitely seems severely wrong when nothing has changed on your machine except the version of PPr. Just a couple random thoughts (that probably won't make a difference):
1. Are you using Multi-cam Clips (i.e. created the way most Adobe tutorials teach you to create them), or are you using a Nested Sequence with Multi-cam Enabled (i.e. the way most on this forum would recommend)?
2. Does life get better when you exit Dropbox completely (or if you uninstall it)?
3. Do you have other items, like Dropbox, running? Close them all?
4. Does the same thing happen with different kinds of footage formats?
5. What version of Anti-virus? Try turning it completely off?
Again, you've probably considered the last two, but if not, it's the first thing I might try.
For what it's worth, I'm running CC 7.1 on Windows 7 64-bit and I'm not experiencing this issue. Not that it's ideal, but I performed the same test you show above while I was running Microsoft Outlook (a few emails open and 3 reminders), Chrome (about 15 instances with 2 or 3 tabs each). Also, background programs running: Microsoft OneNote (desktop version), Bluetooth and WiFi running, Spyder3 monitor calibration utility, CineForm Status viewer (a constantly running service of GoPro Studio) and Webroot Secure Anywhere. Even under these quick and dirty testing conditions, multi-cam is working great for me in 7.1 (I use Nested Sequences; not Multicam-clips). I had a real problem back in July/August that may have been brought about by using Multi-cam clips. I switched to using Nested Sequences, instead, and I haven't had that type of issue since.
I hope there is something helpful for you in all of that.
Best luck! -
I get Sorry but this video is no longer available error when I try to play any video on the Yahoo website. The lead in commercial play but as soon as the desired video is supposed to start the error appears. I can go to youtube, Facebook, and other sites and play videos.
Thanks your your help and concideration
RCPerehaps their server was down? Just tried it on my 10.7.3 MBP and it worked fine. Make sure your flash plugin is up to date and you should be good.
Maybe you are looking for
-
How to install or access my adobe cloud account on a different computer
I am trying to access or install my creative cloud account on a different computer that is a mac, I have logged into my account but do not see my applications I am renting on the mac.
-
Is there any simple way to close a group of PO's?
Hello All, I was looking an answer for my question on forum but didn't found anything which could help me to solve my issue. I would like to close a group of PO's in some period of dates. Is there any simple way to do this? I mean transaction for exa
-
hello - i'm exporting clips i've editing in iMovie '09 as m4v's and converting them into flv's in adobe's media encoder (from a trial download of premier pro CS5) soasto embed them in a pdf... - my frustrating problem is that some of the flv's [that
-
Please help how to pass the dynamic value to VO -- Urgent.
Hi, I have an Oracle Standard VO( SQL Query). As per my requriemnt i extended standard VO with one new feild.Now i want to query the new VO dynamically. How to pass the dynamic values to new query? for refence i am giving my old query. select seconda
-
File uploads using servlets to oracle8i database
Hi, Help please, How I can a File Upload using BLOB's into the oracle database, any sugestions... Thanks Moacyr [email protected]