Im trying to connect my 4s to my car radio but after the safety code it disconnects someone please help me?? the radio says specially made for iphone
please someone who can help me?
In other posts, people have reported that when they remove the faceplate
on their JVC radio, there is a reset button that can be pushed which is not
visible when the faceplate is on. Try that. If removing the faceplate does
not reveal a reset button, look in the users manual for your radio to find out
how to reset the unit.
Similar Messages
-
To open “Java Preferences,” you need to install a Java runtime, but you are not connected to the Internet. I have tried links that people have put on other discussions but all i get is a black screen please help!!
Try this link, warning, it's straight to download mode:
http://support.apple.com/downloads/DL1421/en_US/JavaForMacOSX10.7.dmg -
I have already tried to recover my ipad but it still keeps coming up that it is disabled and to connect to itunes. When i go to itunes it says that I require to put my passcode in on my ipad but i cant because its still disabled. Please help, I have no clue where to go from here. I though by recovering it that it would work but it didn't. Help! Thanks in advance.
Did you do this?
Recovery Mode:
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
recently i downloaded I.O.S 7 and a few days later it says Activation Error.... This device is not register as part of the iphone developer program. If you are a member of the iphone developer program, please register your device in the iphone developer program portal at developer.apple.com/iphone
im trying to restore my phone but i cant without the newest version of itunes.... and i cannot download the newest version of itunes cause when i try it says error 87....
someone please help me would be greatly appreicatedHi there exiledsoul,
You may find the troubleshooting steps in the article below helpful.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
-Griff W. -
HI i was just wondering if anyone could help me!!
i have a macbook pro and i have connected it many times to my toshiba tv through my HDMI cable, and for some reason now when i plug it into my laptop the screen flashes blue on my laptop but nothing happens to the tv it just says no signal and i dont know what to do!!
if anyone could help that would be fab!!
pretty pretty please!!Hello ,
Thanks for using Apple Support Communities.
Please follow the steps below to troubleshoot having no display on the external display.
No video or no signal, image distortion, "snow," or flickering
Check connections
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Apple computers: Troubleshooting issues with video on internal or external displays
Take care,
Alex H. -
After attempting to install the new update, my iPhone is requesting to be pugged into iTunes. On the screen is a picture of iTunes and a cord. When I plug it into my MacBook air it will no recognzie it - though it did so in the past. I attempted a number, if not all, suggested I could find posted but nohting worked. As per one reconmondation, I have attempted to plug it into my PC (Which I don't use often - so I had to do all the updates). My PC recognized the phone and said that my phone was in recovery mode. So, I allowed iTunes to do its thing - iTunes said it was installing updates and recovering the phone (which took about an hour). When it was done, iTunes informed me that the phone needed recovery. So, I clicked recovery. It went through its thing then popped up with an error message 4013. When I requestion further information (button on the bottom), it opens a blank workd document (not really sure what that is about). After the error message, I reset the compuer and plugged it back in. Clicked the restore button but I received the same error message again.
I have also tried to plug it back into my Mac but still no luck.
On both my Mac and PC I have
- Done all the update to both software and iTunes,
- Reset the computer (multiple times)
- reset the phone - but the picure of iTunes and cord remains
- tried different cords
- disabled my security settings
- tried different USB ports
I am at a loss. This is my only phone so I am unable to call apple support. Plus I live in a small town, so there are no apple aproved stores near by.
Thank you in advance for your helpSpent hours trying everything suggested and finally this morning hit on a solution. iTunes must be run as an administrator. Even though you are logged into your PC as an administrator, using the iTunes shortcut does not make you an administrator in iTunes. I found this out by using the diagnostics in iTunes and reading through the results report.
I am using Windows 7, so I clicked the start button and right clicked on iTunes and selected "Run as an adimistrator". The first restore attempt got the 4013 error. I then did the DFU thing, hold power and home buttons for 10 seconds, release power and continue holding home for 10 more seconds.
iTunes gave me the restore message and I clicked it. I clicked the restore iPhone button and it started. The drivers loaded a couple of times. I got the apple logo with the progress bar and this time instead of disappearing, it started to fill in.
End result, a successful restore to factory settings and a happy 14 year old.
Hope this helps others. -
I dropped my phone last night, already with a little glass missing at the top. The screen is black with blue vertical lines, I cant even see my home screen I've tried holding the home and power button. Someome help?
It's broken. Take it to Apple.
-
i would just like know how to save an animated GIF, thank you.
Follow the instructions to the letter here > iPhone and iPod touch: Unable to update or restore
-
Where the heck is it? Help!
Can you attach a screenshot of what your are seeing. That would help.
-
I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
dwgar1322 wrote:
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
Yes, you have WD software installed REMOVE IT !!
WD has warned its customers about their huge mistake that their software doesnt work on Mavericks and causes data loss.
(also dont use WD drives anymore)
Read all about it here:
https://discussions.apple.com/thread/5475136?start=255&tstart=0
See their website on removing the destructive WD software here:
http://community.wd.com/t5/External-Drives-for-Mac/External-Drives-for-Mac-Exper iencing-Data-Loss-with-Maverick-OS/td-p/613775
Western Digital External Hard Drives Experiencing Data Loss On OS X Mavericks
http://www.cultofmac.com/252826/western-digital-external-hard-drives-experiencin g-data-loss-on-os-x-mavericks/ -
I messed up when trying to update lightroom cc.. can someone please help! i'm on a deadline.. oy!
I tried to install nef files from my nikon d750 and it said I needed to install an update for lightroom. it told me to launch creative cloud to do so. when i tried to launch nothing was happening (I didn't realize it was launched in my nav up by the date ). i then went to the website and updated the latest version there. when i started lr it now asks me for a serial number. i have the cloud version and i'm not sure what to do now. i can't find anything in my email (just a verification of paid email) and nothing is in my account info. can someone please help! i'm on a deadline for monday and adobe is closed until then!! ugh..
Ask for serial number http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
-
i have an roor code 1015 can someone please help me
So you're not trying to downgrade iOS?
Make sure itunes is up to date then try restoring via recovery mode. Follow the link below to do this:
http://support.apple.com/kb/ht1808
Hope this helps -
Hello,
While trying to update Adobe Reader XI 10.0.06 to 10.0.07 on my laptop running W7 Home Premium x 64, I get error message 2203. The same occurs if I try to uninstall before manually install the new version. Can you please help?
PS.- Thank you very much for your Support in trying to solve a problem created by yourselves.
Message was edited by: Juan VeranoIs there anything else beside the number 2203?
Try removing the current Reader using http://labs.adobe.com/downloads/acrobatcleaner.html, then install 11.0.07 from http://get.adobe.com/reader/enterprise/ -
I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?
DVI interface does't allow audio. Is there optical IN from your Panasonic TV? By then you can connect your ATV to Panasonic using optical together. It will work.
Maybe you are looking for
-
Getting error in installtion of R/3 4.7
Hi, Please find the encl.and help me for installation Getting error when creating SAP license (post processing) TRACE receiving on port 21212 TRACE sending on port 21213 TRACE host name is pun6061 TRACE effective user corresponds to real user TRACE A
-
Exception in finding the Home object Please Help
Hi All, I am learning EJB. I wrote a bean called Hello Bean(from examples) which just prints out Hello. I tried calling it from the client program and I get this exception javax.naming.NameNotFoundException: Unable to resolve HelloLocalHome. Resolved
-
TS3212 My hard disk crashed and I've gotten a new one and can't download iTunes, any suggestions?
I had a hard disk crash on my laptop, got it replaced and am using Windows 7 and trying to re-install iTunes using Google Chrome, but it keeps saying thank you for downloading iTunes without giving me the option to run or save the program first. And
-
Not shown the latest backup time
I install itunes on my new computer and sync my apple devices. For some reason after I back up my devices at the summary tab it was not written when was the latest backup. I can find it on the preferences but not in the summary tab. I am not sure if
-
Is it possible to have a book in your TOC default to being open when the site is accessed? I have several books, but would like the first one to default to an open state while the remaining books default to closed. Thanks, Maggie