Im trying to setPropertyListener to Selected id in a selectOneListbox

I have done this before but cannot get it to work here...
I tried:
<af:commandButton text="Emps" id="cb1" action="go"> <af:setPropertyListener from="#{row.DepartmentId}" to="#{pageFlowScope.id}" type="action"/>
But I get nothing in the pageFlowScope.Id ... The JDev ui says Reference "row" not found ...
I just want to set the pageFlowScope variable to the DepartmentId selected ...
I have to think this can be done without getting into working with beans etc...
How do I get the selected DepartmentId so I can set it to the pageFlowScope variable and then my next page has this value available?
Help!
Thanks!
Claudio

Claudio,
Please tell its which jdev version you are using.
The 'row' variable its only valid during the stamping of e.g. a table. So where do you try to get the department id from? Can you post some of your code?
Timo

Similar Messages

Vi Freezes upon Trying to Edit or Select

I am trying to edit a VI. Upon trying to delete or select a command with I/O Assistant 1 (the first write command) the computer freezes. Everytime I try to delete this command or commands below it the computer freezes. It seems to be a software bug. I have tried deleting the I/O Assistant and starting from scratch but I don't have enough skill yet in VI writing to do this. Any help would be appreciated.
Nevica
Message Edited by nevica on 07-30-2009 05:53 AM
Message Edited by nevica on 07-30-2009 05:53 AM
Solved!
Go to Solution.
Attachments:
Baratron2.7.1.vi ‏482 KB

check this
Attachments:
Untitled 2.vi ‏214 KB

How do i unfreeze my ipod when ive already tried the menu and select button and that didnt help?

how do i unfreeze my ipod when ive already tried the menu and select button and that didnt help?

How long did you press and hold both the Select (Center) and Menu buttons together? Have you tried doing this procedure more than once? Is the hold switch in the Off position?
If nothing else, let the iPod's battery fully drain. Then charge it back up again.
B-rock

RE: An error occurred while trying to add the selected printer. Error -9672

I am trying to add my HP 8450xi to my Printer List via Print Utility and get the following message: "An error occurred while trying to add the selected printer. Error -9672." I have tried everything, and this printer is only 2 years old. I was able to load an HP 69080 which is about 2 months old, and my Lanier LD232C drivers. Any ideas?

My HP 8450Xi is connected to my LAN [ethernet]. While I do have an Airport Card in my Mac Pro, and two airport base stations active for laptops, it is disabled. What is strange, I was able to load the drivers for a newer HP Network Deskjet 6980xi (Driver version 4.0.2), although it took a couple of times before it would successfully load, but could not figure out why it worked and the 8450xi (Driver 2.5.5) did not. Also, the 4.0.2 driver would not work with the 8450.

Hi, I tried to create a slideshow that contain more than 500 photos. Now, trying to open / execute / select the slideshow, iPhoto hangs with the spinning coloured wheel and I have only to force the deletion from System Preference. Any suggestion?

Hi, I tried to create a slideshow that contain more than 500 photos. Now, trying to open / execute / select the slideshow, iPhoto hangs with the spinning coloured wheel and I have only to force the deletion from System Preference. I already tried to rebuild the iPhoto Library (all the possible options) and tried to update teh version from 9.4.3 to 9.5 but the problem still persists: is there a way to delete this slideshow without selecting it ? How can I solve the problem, please?
Kind Regards

Can you restore your iPhoto Library from a backup version, that was created before you added the slideshow?
If not, have you tried to rebuild the slideshow with iPhoto Library Manager?
As described by Terence Devlin here: Re: iphoto library was created with an unrelased version of iphoto please quit and ugrade library by opening it in iphoto 2 or iphoto 4

I saved My itunes library to an ehd and now my playlists are gone. When I tried option hold and selected it from ehd and added it to my library it copies it but as soon as I eject the hard drive it says choose or create new library when I launch iTunes

I saved my itunes library to an external hard drive and my playlists disappeared. I tried holding down the option button and selecting choose library and selecting the library from the hard drive. When I do this it opens up and everything comes back. When I add the library to my itunes I can see it copying the music but as sson as I unplug the hard drive I have no itunes at all. It says the folder containing the itunes library cannot be found and is required.
Please Help!

You need to make sure it is connected and mounted before launching iTunes.

Im trying to transfer music, selected files and photos from Macbook Pro to Air

I need a fast and easy method to transfer ... any help is appreciated

First, we aren't Apple, just users trying to help users. Second, it is very common for new users to misunderstand what Migration Assistant does. It does not copy files from your previous computer to your new computer. It copies entire accounts. If you open the System Preferences and select the Users & Groups tab, you should find the account that Migration Assistant copied. Log into it and you'll find your files there.

Trying to update,have selected all with ID etc,but will not update

Trying to download updates...have selected "all" and entered relevant ID etc,but nothing happens....pls help!

Reset iPad and try again. One app at a time.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

I am trying to download (share) selected photos from my Mac to my i-pad. Get as far as hitting apply but nothing happens. What is universal access...should I hit that button?

I am trying to share selected photos from my Mac to my I Pad.I went into I-Tunes and followed the instructions and am fine until it says to hit apply....which I do and nothing happens. I can't seem to highlight the I Pad "device" logo on the (left side of the I-Tunes) list to be able to share the photos. (I still want to keep them in my Mac, also). At the bottom of the instructions to accomplish this it says Universal Access...should I click on that? And what is it? Should I be selecting synch thru wi-fi?

Eject the iPad if necessary, quit iTunes and restart your Mac.
Connect the iPad to your Mac with the cable and launch iTunes. Now see if you can click on the iPad name on the left side of iTunes. If you can, go into the photos tab of iTunes in the window on the right and make sure that the Sync Photos heading is checked. Then select the folder form which you want to sync photos - maybe iPhoto on your Mac? Then select all of the albums, events, faces - however you have them set up - then click on Apply. See if that works.
The photos will still be on your Mac after you sync. Do not click on Universal Access - you don't need that to sync.
Here is a very helpful Apple support article that you can read as well.
http://support.apple.com/kb/HT4236
You can deal with WiFi sync later.
Message was edited by: Demo

Acrobat CS3 extended constantly tries to 'reinstall' when selecting files in Vista Pro 64bit

Man this is truly annoying. When I select a file in win explorer I often get the 'Windows must install or reconfigure Acrobat blah, blah, blah' when I wasn't trying to open it in the first place. This has been doing this sporatically ever since I got the software in '08. Now it's doing it constantly. I have reinstalled this program a number of times and it just keeps doing it. Plus why does it have to reinstall when I actively select the shortcut to start the program specifically? This doesn't happen on my XP machines or my Win7 machine. Only in Vista. Anyone got any ideas other than 'reinstall' or upgrade to Win7?

Thank you for your input.
When my company purchased Adobe's Master Collection CS3 Acrobat 8 Professional came with it. I may have made a mistake in my nomenclature but that still does not change the fact that every time someone right clicks within a file window in Vista Pro, Acrobat starts up and tries to reinstall. If you have some helpful input as to how this may be corrected, we are interested in hearing it.

Netinstall - Trying to Customize Package Selection

I am trying to create an image of Leopard (client) to do NetInstall's so I can upgrade a bunch of laptops around our school. I would like to make the process automated, but when I add "Customize Package Selection" to a workflow, no packages show up in the window. I'm probably doing something wrong, but I can't figure out what it is.
I am creating this image from a Leopard DVD and using a Leopard equipped Macbook to create the image. I will move the image over to a Leopard equipped Xserve once I have it created.
Thanks for any help you can give.

Same problem here... but I am using an ASR image instead of the 10.5 DVD. I am not able to create a NetInstall image that includes packages on my 10.5.4 Server. I reapplied the 10.5.4 combo update just to be sure I was not missing something but, alas, still no workflow.
You may wish to use Automator instead to handle the package distribution.
Sorry, not what you wanted to hear.

Problems when I have tried execute two consecutive selects

Hi,
I am trying to execute two consecutive selects, when the second sql has been executed, it response "Operation failure of ado2xfa. Imposible find the element in the colection that corresponds with the name" (I have translated the message).
The error happens when I execute the second DB.open
In the data conection I have selected "text" in the commandType with "select * from t1"
First I tried to execute both sqls but, if I try to execute just the "select * from t2" in the first sql command I obtain the same error.
In the data view I have just one db connection linked with table T1, do I need to create one db connection per table?
For example if I want to connect with 6 different tables I will need 6 different DB connection objects.
Somebody know what is the problem?
Thanks
Rubén
var DB;
var record;
var i;
DB = xfa.sourceSet.Oracle
record = xfa.record.Oracle
try {
DB.close();
} catch (e) {}
DB.resolveNode("#command").query.select.value = 'Select * from T1';
DB.open();
DB.first();
for (i=0;i <= record.nodes.length;i++)
console.println(record.nodes.item(0).value);
DB.next();
DB.close();
DB.resolveNode("#command").query.select.value = 'Select * from T2';
DB.open(); <--------LINE THAT PRODUCE THE ERROR---------

It's because the data connection has been set up to expect the fields returned from T1. When you query T2 different fields are returned and it doesn't know what to do with them so it throws an error. You would need to 2 data connections, 1 for T1 and 1 for T2.
Chris
Adobe Enterprise Developer Support

Trying to add menu selections to Workbench

Trying to add additional menu items to represent another set of reports. Looking at <>/Workbench/workspace/conf/ws-mainMenu.xml I see how to define the menu items. But I don't know how that links into any thing else, or how the labels are applied.
Looking at the source of the web page I see this:
javascript:budoLookupTable['toggle-subnav-reporting'].toggle();" id="toggle-subnav-reporting" >View Reports</a>
but I don't know where that is coming from.

The id's in the ws-mainMenu.xml links off to the ws-extensions.xml file as well as certain "well-known" keys that come bundled with Workbench itself.
For a "Hello World" type example, you can add the following to ws-mainMenu.xml:
<menuitem id="stuff" onLaunchPage="true"/>
and the following to ws-extensions.xml:
<extension id="stuff"
defaultName="New Stuff"
defaultDescription="Hello World."
role="settings"
url="http://www.cnn.com"
sharedSecret="[COPY THIS FROM AN EXISTING ENTRY IN THE FILE]"
height="800"/>
After a restart of the Endeca Tools Service, you should now see your entry in the Workbench. There's a ton of stuff you can do here and additional context variables to make a more "real" Endeca specific extension but this should at least get you started.
Regards,
Patrick

Paths Disappear When Trying to Convert to Selection

When I draw a path and close it, and then click the selection button, it turns into a selection. But when I add another path, and close it, and click on the selection button, instead of both paths turning into selections, nothing happens, and the paths just quit. I know I used to be able to have multiple paths convert to selections in the past. What am I doing wrong now?

Let me put it another way. When I draw several different work paths, and save them, all is fine. They are all closed paths. If I click on the Stroke button, they stroke as expected. If I click on the Selection button, nothing happens, and the paths quit. They're still visible in the Path Panel, just no longer selected.

What am I trying to do? Selecting fill areas?

Hello all,
I am at a roadblock searching for the proper terms to find tutorials for what I am seeking to learn
We own a construction company and I want the ability to do show the customer different colors of paint on their base, trim, gables doors and so on from a photo.Example: I want the ability to select the gable with polygonal tool(since most everything is straight lines) then hit shift and select the door and make this its own group.then move on to selecting all the trim, then the base color. Then if the customer does not like color selection I could easily just fill the "group(gable/door)" when i want.
What is the proper why to achieve this?
I have some ps skills...I just dont even know what to look for, for tutorials or youtubes. Thanks!

Start with a typical property JPG.
Open a layer above the JPG and fill with White
Add a Hue Saturation layer, and copy it as many times as you have different colours.
Select the Hue/Saturation layers and Group them.
Now you have the tricky job of matching each H/S layer to a colour. Turn off all the H/S layer except for one and check Colorize. (It would be easier if you have a Swatch Layer. Maybe scan the swatch and add it as a layer, and Free Transform so it fits in the corner of your image, and you can use it as a reference. )
Do this for each of the H/S layers, naming them accordingly, and turning on only the one you are working on.
You now have a group with all the colour options, so make a few copies of the group. (I don't suppose you use more than two or three different colours on the same property.)
Your layers panel will look something like this:
OK, so turn off the White layer. All of your groups should also be turned off. Use the Lasso tool together with Alt (Opt) to select an area, and with the selection place, add a layer mask to the first group. Twirl open a group, and turn on a colour, and the Swatch layer so you can adjust for lighting etc.
If you want to add to the layer mask, just make another selection and fill with white. I am sure you'll manage from there.
Save this document and use it as a master. Perhaps make it Read Only so you can't over write it. Now you have a template for all your jobs. It will be no problem Selecting All the groups, and using Free Transform to make them fit other property JPGs because there are no pixels.
Good luck.

Im trying to setPropertyListener to Selected id in a selectOneListbox

Similar Messages

Maybe you are looking for