IMac Freezes While Playing Games

When playing games (BioShock Infinite, Starcraft, Civ 5) my iMac will suddenly completely freeze: no mouse movement, no keyboard responses, nothing.  Occassionally the audio will stutter and repeat over and over again for a second or two before stopping. The only way to do anything is to turn off the computer and turn it back on.
It seems to happen at random times, but only when playing these games, which makes me think it may have to do with the video card.
If anyone has any ideas, I would love some help!
—Michael

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'\\\\n",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/;END { if(NR<100)print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { $4="";gsub("  "," ");gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a)print "CPU: "a;if(b)print "I/O: "b;if(c)print "Net: "c" (KiB/s)";if(d)print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2.+/,"",a[n-1]);b=b"\n"$2" "a[n-1]" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF=int($NF/10240)} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L)f=f"\n   "$0;} END { F=FILENAME;if(!F)exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message Req "Beac|caug|dead[^bl]|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Rne "Goog|ksadm|SMC:" -o -k Sender fseventsd -k Message Req "SL"' '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@out[execname,uid]=sum(arg0)} tick-10sec {trunc(@out,1);exit(0)}'";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v[0]=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "${v[0]}" ]];};A'$((3+i))'() { v[0]=` while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "${v[0]}" ]];};A'$((5+i))'() { v[0]=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "${v[0]}" ]];};';done;A7(){ v[0]=$((`date +%s`-v[3]));};B2(){ v[$1]="${v[0]}";};for i in 0 1;do eval ' B'$i'() { unset v[0];((v['$((i+1))']==0))||{ v[0]=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v[0]=` paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v[0]=`grep -Fv "${v[$1]}"<<<"${v[0]}"`;};C0(){ test "${v[0]}"&&echo "$_";};C1() { [[ "${v[0]}" ]]&&printf "${f[$1]}" "${l[$2]}" "${v[0]}";};C2() { v[0]=`echo ${v[0]}`;[[ "${v[0]}" != 0 ]]&&C1 0 $1;};C3() { v[0]=`sed -E "${s[0]}"<<<"${v[0]}"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A4 14 6 11 0;B2 0 5;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A4 14 7 11 6;B2 0 7;B3 4 0 22;A4 14 6 11 0;B2 0 8;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Similar Messages

  • MSI s939 k8n neo4-F Freezes while playing games

    I got the following system:
    MSI S939 K8N NEO4-F
    AMD Athlon 64 S939 3200+
    Twinmos DDRAM 3x 512 MB PC3200 400MHz
    Western Digital 250GB 7200RPM SATA (8MB CACHE)
    XFX GeForce 6600-GT 256MB PCI-X
    when i'm trying to play the system sometimes just freezes can't do anything accept pressing the reset button. Mostly I get it while playing games (mostly Battlefield 2, UT2004, Day of defaet source) While playing or sometimes just in the menu of the game my screen freezes and i hear a last sound. i've runned a memtest before, so my memory isn't the problem, i also tried several drivers on my system (nforce drivers and nvidea drivers for the graphic card). All the temperatures are good to (between 25 and 40°C). Anyone else has this problem ? or did anyone else had this and solved it ?

    Quote
    about those timings how can i change them, i mean what program do i have to use ?
    You have to go into BIOs to change your settings, look at your MB manual in the BIO sections for more info.
    But according to CPUZ your timings are already set correctly so I would not worry about that right now.
    Check the ram makers site for the timings of your ram to make sure that you are within thier specs.
    Quote
    the dual channel kit is now in slot 1 and 2 (the purple ones) but it still froze after 10minutes
    Dual channel is 1 stick of ram in the purple slot and one in the green slot, make sure to use slot 1 & 2 as using 2&3 can cause problems. Slot 1 is the one closest to the CPU.

  • MSI P35 Neo-F (MS-7360): Computer randomly freezes while playing games

    Hi there,
    I have reached the end of my technical knowledge right now and I'm not even sure if this area of the forum is appropriate. The problem:
    While playing higher-end games like Crysis 2, Anno 1404, Mass Effect 2 etc. my computer randomly freezes and the last few milliseconds of sound are being looped on my speakers (kind of like a buzzing sound).
    By "freezing" I mean that my computer becomes unresponsive to any action other than pressing the Reset-Button or holding down the Power-Up-Button (no reaction to Ctrl+Alt+Del, Alt+F4, Alt+Tab, no mouse movement... you get it).
    There's no exact timing as to when these freezes occur. The fastest freeze happened after less than a minute of playing a game, slowes one (just today after switching to my newer case with better cooling) took about 2 hours.
    This freeze only occurs while my System is under load. No freezes while browsing the web, using office programs, listening to music or watching videos.
    System Specs:
        Mainboard: MSI P35 Neo-F (MSI-7360)
        CPU: Intel Core2Quad Q6600 @2.4GHz
        RAM: 4x 1GB DDR2-800 Corsair XMS2
        Graphics: Gainward GeForce GTX 560 Ti, 1GB GDDR5 VRAM
        PSU: Antec High Current Gamer 620W (upgraded from Xilence XP600, 600W)
        New CPU Cooler: Arctic Freezer 13 Pro (upgraded from OEM Intel Boxed Cooler)
        New Case: Zalman Z9 Plus w/ 4x 120 mm Fans (Upgraded from a Case with only 1x 250mm side Fan)
        2 Western Digital HDD (1x 2TB, 1x320 GB)
        1 DVD Reader/Burner (unimportant for that error I guess)
        OS: Windows 7 Ultimate 64-Bit
        2 Screens: 1x 24" Asus VS248H and 1x 21" LG Flatron Wide W2240T
    Since this error is bugging me for quite a while now and since this is not the first forum I'm trying to get help from, here's a list of steps i already took to get rid of it, obviously to no good use:
        reinstalled games where the freeze occurred
        updated all Drivers (including cleaning old versions in safe mode; also tried older drivers)
        updated BIOS to v1.A0
        Reinstalled Windows
        bought new Case and CPU Cooler to improve Air Flow/Cooling
        checked Seating of all components (took out, cleaned, reapplied thermal grease where neccessary, re-inserted)
        cleaned old case of dust (obviously no problem in the new case, which is 2 days "old")
        ran 7 sequences of Memtes86+ without any errors
        ran Prime95 without any errors for about 45 Minutes
        ran Furmark for 15 Minutes under full load (burn-in test) without any problems, even though my graphics card hit the 100°C frequency-cut level
        ran Furmark and Prime95 simultaneously without any problems
        took records of component temperatures and system voltages without noticing anything unusual (at least not after i switched to the newer PSU, which is about 1 Month old - yet didn't resolve the problem)
        tested with cyclic removal of 1 RAM device to further rule out RAM malfunction
        tested with only 2 RAM devices in dual channel mode (Slots 1 and 3)
        tried to reduce RAM clock (800 MHz --> 667 MHz) to no avail
        checked S.M.A.R.T. values of HDDs, no issues reported
        tested without any background programs
        raised/lowered voltages to RAM, CPU and Chipset in BIOS to increase logic circuit stability/decrease heat production
    I need to mention: After I transferred my system to the new case, i was able to play longer than average compared to my old case. So I am guessing that improper cooling was part of the problem, yet improving cooling obviously didn't resolve it.
    Since these freezes are really annoying and nobody could help me resolve this so far, I'm hoping to find some new ways of narrowing down the problem or even getting rid of it here.
    Regards
    Sebb

    Quote from: Bernhard on 10-July-12, 13:15:30
    Lets be realistic. A system with a 560TI is recommended to have a around 31Amps under full load, a CX500 would be sufficient.
    Have you monitored your CPU and memory utilisation ?
    As suggested before, test the GPU in another computer to see if the behaviour is the same.
    Whew, I thought for a second there that my common sense had left me when I saw that 60-Amp-Post ^^
    Yes, I monitored CPU and RAM usage, there is no recognizeable pattern to be seen and it almost never happens under full load.
    I will see if a friend of mine can test my GPU on his computer, and I will test it underclocked right away.
    Though one more question regarding that: Should I only underclock GPU Core Clock or both Core and RAM clock?

  • MSI TI 4200 - TD8X - PC freezes while playing games.. Dx problem? Settings? HELP!

    Hi
    I bought a MSI GF4 TI-4200 TD 8x about 2 months ago, and it has been running fine 'till now...I'm having a few problems in a few games (HALO, homeworld 2), ocasionally my computer freezes completely in the middle of these games, and I have to reboot...I've tried lots of things to solve this problem, but I wasn't able to just yet...As I know these 2 games use directx 9, I was wondering if my graphics card supports or is compatible with dx9...In the manual and on the site it says dx 8.1 compatible...doesn't mention dx 9... So I'd like to know if it is compatible, and if this may be the cause for all these gaming problems...If not, I'd like to know what can I do to detect where the problem is...
    When the game crashes, a long beeping sound occurs...I think this may be relevant too...
    I've updated the SB drivers, mobo drivers, nvidia drivers (tried 45.23 and 44.03), tried changing AGP aperture size on BIOS (64 or 128),
    MSI K7N2 DELTA-L
    AMD Athlon XP 2100+
    512 MB DDR333 (Kingston)
    MSI GF4 TI 4200 - TD8X
    Creative Sound Blaster Audigy Player
    Pinnacle Studio-TV
    Realtek RTL8139/810x Family Fast Ethernet NIC
    IBM 80GB 7200 RPM HD
    Samsung DVD-ROM
    LG CD-RW
    Windows XP Professional with SP1 and fully updated.
    450w PSU
    Samtron 96B
    IRQ Settings :
    (ISA) 0 System timer
    (ISA) 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
    (ISA) 3 Communications Port (COM2)
    (ISA) 4 Communications Port (COM1)
    (PCI) 5 NVIDIA nForce PCI System Management
    (PCI) 5 Studio PCTV (Audio)
    (ISA) 6 Standard floppy disk controller
    (ISA) 8 System CMOS/real time clock
    (ISA) 9 Microsoft ACPI-Compliant System
    (ISA) 13 Numeric data processor
    (ISA) 14 Primary IDE Channel
    (ISA) 15 Secondary IDE Channel
    (PCI) 16 Creative SB Audigy
    (PCI) 16 Studio PCTV
    (PCI) 17 OHCI Compliant IEEE 1394 Host Controller
    (PCI) 17 Realtek RTL8139/810x Family Fast Ethernet NIC
    (PCI) 19 NVIDIA GeForce4 Ti 4200 with AGP8X
    (PCI) 20 Standard OpenHCD USB Host Controller
    (PCI) 21 Standard Enhanced PCI to USB Host Controller
    (PCI) 22 Standard OpenHCD USB Host Controller

    Disable Spread Spectrum for both the CPU and AGP, Disable any BIOS caching and shadowing
    What unified driver package did you install? I recommend using the 2.03's
    Please create a signature in your profile like mine.
    I don't think this is directly related to your video card.
    If no help here:
    Post this question in the nForce forum too and tell them I told you to.
    The reason is someone may have had this problem from that forum but deos not visit this one. I also suggest you post this question over at http://www.nforcershq.com/forum/ to see if they have experienced it.
    I know I have experienced this problem but for the life of me I cannot remember what it was that fixed it.
    Your sound and TV card are sharing IRQ's, you really should try to swap PCI slots so the Audigy is on it's own and the same goes with the TV card. I know slot 3 is a good spot for the TV card, you may have to swap till you get the best IRQ allocation.
    Post about the SOD not the VGA in the nForce forum

  • HT1688 My iPhone 4s battery got drained while playing games, and now it won't open even if im charging. what can i do?.

    My phone's battery got drained while playing games and now it wont open if i connect it to my charger,?.what can i do? my phone was given to me as a gift from the a relative in the US and im from the Philippines. How can i fix it? Do i need to bring it to any apple center to have it replaced? or is there a quick fix to this problem?...

    Keep iPhone on Wall Charger for 10 minutes, it may turn ON itself. If still OFF, keep on Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to start, this can sometimes take about 20 seconds time of holding both buttons while on charger.

  • My iMac freezes while working but more often when in stand by is.

    my iMac freezes while working but more often when in stand by is.

    Hi ervinfromgermany,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with your iMac:
    OS X Mavericks: If your Mac runs slowly
    http://support.apple.com/kb/PH13895
    OS X Mavericks: If an app freezes or quits unexpectedly
    http://support.apple.com/kb/PH13975
    Cheers,
    - Judy

  • My iMac freezes while using safari.  I have Mavericks installed

    Several times my iMac freezes while using Safari. Only way to get out is to do a hard shut-down by holding the start button.  Any ideas?  Version of Maveriks is 10.9.2
    Mel

    Hardware Information:
              iMac (21.5-inch, Late 2009)
              iMac - model: iMac10,1
              1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
              8 GB RAM
    Video Information:
              ATI Radeon HD 4670 - VRAM: 256 MB
    System Software:
              OS X 10.9.2 (13C64) - Uptime: 0 days 1:31:41
    Disk Information:
              APPLE HDD HUA722010CLA330 disk0 : (1 TB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 999.35 GB (803.35 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              OPTIARC DVD RW AD-5680H 
    USB Information:
              Apple Inc. Built-in iSight
              Apple Internal Memory Card Reader
              Western Digital My Passport 0748 1 TB
                        EFI (disk1s1) <not mounted>: 209.7 MB
                        disk1s2 (disk1s2) <not mounted>: 999.83 GB
                        Boot OS X (disk1s3) <not mounted>: 134.2 MB
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
              LaCie d2 quadra (button) 800mbit - 800mbit max
                        disk2s1 (disk2s1) <not mounted>: 32 KB
                        LaCie (disk2s3) /Volumes/LaCie: 1 TB (19.21 GB free)
    Thunderbolt Information:
    Kernel Extensions:
              com.intego.netbarrier.kext.monitor          (653)
              com.intego.netbarrier.kext.process          (653)
              com.intego.netbarrier.kext.network          (653)
              com.intego.virusbarrier.kext.realtime          (772)
              net.kromtech.kext.AVKauth          (2.3.6 - SDK 10.8)
              net.kromtech.kext.Firewall          (2.3.6 - SDK 10.8)
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.google.keystone.daemon.plist 3rd-Party support link
              [System] com.intego.commonservices.daemon.integod.plist 3rd-Party support link
              [System] com.intego.commonservices.daemon.taskmanager.plist 3rd-Party support link
              [System] com.intego.commonservices.icalserver.plist 3rd-Party support link
              [System] com.intego.commonservices.metrics.kschecker.plist 3rd-Party support link
              [System] com.intego.netbarrier.daemon.logger.plist 3rd-Party support link
              [System] com.intego.netbarrier.daemon.monitor.plist 3rd-Party support link
              [System] com.intego.netbarrier.daemon.plist 3rd-Party support link
              [System] com.intego.netupdate.daemon.plist 3rd-Party support link
              [System] com.intego.virusbarrier.daemon.emlparser.plist 3rd-Party support link
              [System] com.intego.virusbarrier.daemon.logger.plist 3rd-Party support link
              [System] com.intego.virusbarrier.daemon.plist 3rd-Party support link
              [System] com.intego.virusbarrier.daemon.scanner.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
              [System] com.trusteer.rooks.rooksd.plist 3rd-Party support link
              [System] com.zeobit.MacKeeper.AntiVirus.plist 3rd-Party support link
    Launch Agents:
              [System] com.google.keystone.agent.plist 3rd-Party support link
              [System] com.intego.commonservices.integomenu.plist 3rd-Party support link
              [System] com.intego.commonservices.taskmanager.plist 3rd-Party support link
              [System] com.intego.commonservices.uninstaller.plist 3rd-Party support link
              [System] com.intego.netbarrier.alert.plist 3rd-Party support link
              [System] com.intego.netupdate.agent.plist 3rd-Party support link
              [System] com.intego.virusbarrier.alert.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
              [System] com.trusteer.rapport.rapportd.plist 3rd-Party support link
              [System] com.wacom.pentablet.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] ca.indev.MailTagsHelper.agent.plist 3rd-Party support link
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [not loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist 3rd-Party support link
              [not loaded] com.zeobit.MacKeeper.Helper.plist 3rd-Party support link
              [not loaded] ws.agile.1PasswordAgent.plist 3rd-Party support link
    User Login Items:
              Garmin Lifetime Map Updater
              iTunesHelper
              TextExpander (3.1.1)
              FaceTime
              EvernoteHelper
              Fantastical
              Dropbox
              AdobeResourceSynchronizer
              EvernoteHelper
              IntegoStatusItemHelper
    Internet Plug-ins:
              o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
              WacomNetscape: Version: 1.1.0-4 3rd-Party support link
              Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 3rd-Party support link
              OfficeLiveBrowserPlugin: Version: 12.3.4 3rd-Party support link
              WacomSafari: Version: 1.1.0-4 3rd-Party support link
              Silverlight: Version: 4.1.10329.0 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
              Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
              iPhotoPhotocast: Version: 7.0
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
              CANONiMAGEGATEWAYDL: Version: 3.2.0.1 - SDK 10.6 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Safari Extensions:
              1Password: Version: 3.9.20
              Evernote Web Clipper: Version: 6.1
              AdBlock: Version: 2.6.18
              Open in Internet Explorer: Version: 1.0
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
              RocketLifeCmp: Version: (null) 3rd-Party support link
              UploadManager: Version: (null) 3rd-Party support link
              WebEx64: Version: 1.0 - SDK 10.5 3rd-Party support link
              WebEx: Version: 1.0 3rd-Party support link
              RocketEngine: Version: (null) 3rd-Party support link
              ContentManager: Version: (null) 3rd-Party support link
              CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
    3rd Party Preference Panes:
              PenTablet  3rd-Party support link
              Flash Player  3rd-Party support link
              Flip4Mac WMV  3rd-Party support link
              Java  3rd-Party support link
              MacFUSE  3rd-Party support link
              Trusteer Endpoint Protection  3rd-Party support link
    Old Applications:
              /Users/[redacted]/Downloads
                        NoteBook-4:          Version: 3.1.7 - SDK 10.5 3rd-Party support link
                        NoteBook-5:          Version: 3.1.8 - SDK 10.5 3rd-Party support link
                        NoteBook-6:          Version: 3.1.8 - SDK 10.5 3rd-Party support link
                        NoteBook-2:          Version: 3.1 - SDK 10.5 3rd-Party support link
                        NoteBook:          Version: 3.0.15 - SDK 10.5 3rd-Party support link
                        NoteBook-3:          Version: 3.1.2 - SDK 10.5 3rd-Party support link
                        NoteBook-7:          Version: 3.1.9 - SDK 10.5 3rd-Party support link
                        NoteBook-1:          Version: 3.0.10 - SDK 10.5 3rd-Party support link
              Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              Meeting Center:          Version: 12.27.23.0 - SDK 10.5 3rd-Party support link
                        /Users/[redacted]/Library/Application Support/WebEx Folder/1124/Meeting Center.app
              Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              NoteBook:          Version: 3.1.9 - SDK 10.5 3rd-Party support link
              Family Tree Maker:          Version: 19.2.4 - SDK 10.5 3rd-Party support link
              Garmin Lifetime Map Updater:          Version: 2.2 - SDK 10.5 3rd-Party support link
              /Applications/Microsoft Office 2011
                        Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              Network Recording Player:          Version: 2.2.0 - SDK 10.5 3rd-Party support link
                        /Users/[redacted]/Library/Application Support/WebEx Folder/500/Network Recording Player.app
              /Applications/Microsoft Office 2011/Office
                        Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              Garmin Map Update:          Version: 4.5.1 - SDK 10.5 3rd-Party support link
                        /Users/[redacted]/Library/Application Support/Garmin/Garmin Map Update/tmp/Garmin Map Update.app
              /Users/[redacted]/Library/Application Support/WebEx Folder/1224
                        Cisco WebEx Meeting Center:          Version: 11.24.32.0 - SDK 10.5 3rd-Party support link
                        asannotation2:          Version: 8.25.31.0 - SDK 10.5 3rd-Party support link
                        atmsupload:          Version: 4.14.29.0 - SDK 10.5 3rd-Party support link
                        convertpdf:          Version: 1.2 - SDK 10.5 3rd-Party support link
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              /Library/Application Support/Microsoft/MERP2.0
                        Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                        Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 930.71 GB Disk used: 182.53 GB
              Destinations:
                        LaCie [Local] (Last used)
                        Total size: 931.39 GB
                        Total number of backups: 90
                        Oldest backup: 2012-07-26 15:05:23 +0000
                        Last backup: 2014-04-06 18:34:11 +0000
                        Size of backup disk: Adequate
                                  Backup size 931.39 GB > (Disk used 182.53 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   6%          mds
                   3%          AntiVirus
                   2%          EtreCheck
                   2%          WindowServer
                   0%          ocspd
    Top Processes by Memory:
              270 MB          Safari
              229 MB          AntiVirus
              164 MB          mds_stores
              156 MB          com.apple.IconServicesAgent
              131 MB          MacKeeper Helper
    Virtual Memory Information:
              3.53 GB          Free RAM
              2.76 GB          Active RAM
              950 MB          Inactive RAM
              802 MB          Wired RAM
              676 MB          Page-ins
              0 B          Page-outs

  • While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player.Or neither connects to the server that i created

    While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player. Or, any other devices doesn't  connects to the LAN server that i created in the Game.     
    Could any one help me please.

    Please do not post more than about 50 lines of console logs or output from an Application crash at a time. No one can make it through those.
    If you had a kernel panic, those are Full of good information and should be posted in their entirety. They are stored, and can be read back and posted using this article:
    How to log a kernel panic

  • I purchased iphone 5 a month back... It get very hot and drained very quickly while playing games . What should i do ??

    I purchased iphone 5 a month back... It get very hot and drained very quickly while playing games . What should i do ??

    Take it in for service at your nearest Apple Store or authorized reseller.

  • S890 screen turns off while playing games

    I bought this phone a week ago.Everything about this phone is awesom except one thing. The screen turns off while playing games automatically,which is really annoying. Is there any fix for this??

    Graphics card springs to mind;
    also, in your game settings, in either options or video settings (or similar). Are the settings correct for your card. I know on a low end PC, "full hardware acceleration" can cause crashing.
    I'd still think, it's more a graphics related problem. If you have a big flat screen mintor (e.g 24,27 or even 30") then that, in it's own right needs a good card. Add the game to it and you may have problems. I do take it you have compared the specs with what's required on the box (of the game) and "about this mac/"more info"). All the best.

  • FF 3.6.6: No .sol-files created while playing games on Kongregate?

    Ever since the update to 3.6.6 FF has not been creating any .sol-files (or the accompanying folders) for saving progress while playing games on the site Kongregate.
    I have checked the Global Storage Settings panel of Flash and they are as they should be.
    I have tried deleting and re-installing both flash and FF without result.
    .sol-files are being created while using IE.
    I'm using fully updated XP.
    I'd appreciate any help, TIA
    == URL of affected sites ==
    http://www.kongregate.com/

    That indeed might be the problem!
    The slider is mysteriously on the none-setting at that particular tab!? (any guess as to why? I certainly haven't touched it!)
    I have tried putting it on unlimited, but it keeps returning to the none-setting after I switched tabs. This only happens on that particular tab, changes I make on other tabs are saved normally.
    Any suggestions on fixing this?

  • After iOS7 update while playing game iphone 5 overheat in just 2-3 mins. How to fix this problem?

    After iOS7 update while playing game iphone 5 overheat in just 2-3 mins. How to fix this problem? Before upgrade to iOS7 I used to play game for hours and never faced this problem. This is specially when I play HayDay.
    Please advise.

    Buenas, otra vez. Terminé resolviendo mi problema instalando el AE CC. que no es lo que quería en principio pero al final lo que me importa es poder disfrutar del programa. el único problema es que gracias a la tarjeta gráfica que trae mi modelo de MacBook, no podré disfrutar de la opción de trabajar los gráficos en GPU sino únicamente en CPU. ya que para trabajar en GPU necesito el complemento CUDA que mi tarjeta no lo puede utilizar. igual seguiré buscando respuestas a mi caso por la web y otros foros.
    Hello again. I ended up installing AE CC to fix my problem. although that was not what I was looking for but at the end all that matter is to enjoy the software. The only unsolving issue is that I won't be able to enjoy the option of working graphics in GPU mode due to my graphic card. It needs CUDA and intel doesn't support it. I'll keep on looking for answers to my trouble with AE CS6 in the web. 

  • I don't want to stay with iOS 7 any more, i can't tolerate it to being very slow and to hand while playing games, it doesn't run properly, i have no games in my phone right now becouse of that bug, could i downgrade my ios of iphone 4s? Please help thanx

    I don't want to stay with iOS 7 any more, i can't tolerate it to being very slow and to hand while playing games, it doesn't run properly, i have no games in my phone right now becouse of that bug, could i downgrade my ios of iphone 4s? Please help thanx

    That is HANG sorry miss type

  • While playing games computer feels somewhat hot to the touch is it going to burn out?

    Hi while playing games I feel like my macbook is going to burn out because the bottom feels somewhat hot to the touch from playing games for about 15 minutes I don't want my computer to get ruined from this unless it can't but is there any way to keep it cool, It's brand new 8 gb of ram and 2.9 ghz processor

    You could use a cooling pad - with or without fans. But it's normal for MacBook Pros to heat up when playing games. Your fans should rev up as your MBP heats up. If it gets too hot, you'll experience a thermal shutdown before anything can be ruined - but I doubt that you're even close to that!
    Clinton

  • After upgrading to latest IOS while playing games screen is flickering

    While playing games screen is flickering after upgrading to latest IOS.

    I have taken it out of the case - I figured it would obstruct the sensor (also have no screen protector).
    Only thing I haven't tried from the Basic troubleshooting steps you mentioned was to "restore as new".
    That I did try it tonight (succesffully restored), BUT my problem still exists.
    You mentioned to go in the MAC store > Would they replace it (for free) if they reach the conclusion it's some sort of manufacturer faulty wiring even if it's a 3Gs (as an old model)?
    Would they still if phone had water damage (this I'm just curious - the phone didn't)?

Maybe you are looking for

  • Editing in Pieces

    I have been amassing material and editing sequences for a project I will be assembling later. I'll not need the individual projects or their media for this (thats why I have been editing in pieces) I want to export the individual segments as finished

  • Why dont my dimension levels show up instead i get "Standard" level??

    Hi i am facing a very tiresome problem and i cant figure it out,you see i have crated two levels in my dimesnsion Level: School Number (BuisnessIdentifier) level: Office OfficeNo (BI) but in the query builder of charts i only see 'STANDARD' and non o

  • IPod won't run anymore

    I tried out the linuxipod but it didn't work out too well, so I got the newest version of iTunes and reinstalled the firmware with it. Then it said, the iPod needs reboot. The iPod showed a loading screen an than ran completely black. Since that, I c

  • OCI header files

    Can I build OCI programs with the 8i I downloaded? If not, it's not worth the trouble installing it... Pleaze answer! Martin null

  • Why can't I see shared fotostreams on my laptop

    why can't I see shared photostreams on my laptop, and how do I export shared photos till f.i. fotos on my computer.