IMac / PC networking help please!

Hello
I have a PC with Outlook and an iMac with Entourage and a printer connected. I would like to be able to sync the Outlook calendar on the PC over to Entourage, and use the printer connected to the iMac on my PC.
I have an ethernet cable which I have connected to the ports on both computers and have looked at network settings but am at a loss as to how to set this up.
Is there a quick and cheap way of doing what I want to do with the set up described above?
Many thanks
Martyn.

http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh2054.html
That article pretty much sums it up. YOu have to make sure that you assign the two computers IP addresses that are on the same network and subnet. (10.10.10.1 and 10.10.10.2 for example... subnet 255.255.255.0 on both). Then those instructions should work.
To share the printer look here:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1770.html
As for the Entourage/Outlook... I can't help with that but I'm guessing without an Exchange server, you're going to be jumping through some serious hoops to get it to do what you want. Maybe try Microsoft's support site.
Also, connecting two computers without a hub or a router is pretty limiting. You'd be better off buying a broadband router, unless you still use dial up... then I guess this solution is ok.

Similar Messages

Print job from Windows hangs in iMac print queue - help please!!!

I have a new iMac core duo and am trying to print to my Epson Stylus CX4600 from Windows. Bonjour sees the printer and sets it up, the print job seems to go just fine, but when I check my G5 (the Epson is connected to the G5) I see the job stopped. If I try to start the job, nothing happens... the only way to clear the Q is to delete the job.
I have all the latest drivers, and have tried bonjour both with generic postscript and with the Epson driver - no luck.
Any advice would be greatly appreciated....

Embedded Chat turns Web Visitors into Clients
Turn up to 90% of your web visitors into Clients!
Our Embedded Chat does just that.
http://www.chatresponse.com/
http://www.chatresponse.com/
http://www.chatresponse.com/
Not just live chat, Embedded Chat!
This Phenomenon Will Skyrocket Your Sales!
If you are not using Embedded Chat on your site, you are losing valuable
clients. That is just a fact. There is an unimaginable difference what
Embedded chat does for converting browsing web surfers into leads and
clients.
We get your visitors contact information or it's FREE
We're so confident that it works, we give you a 15-day, fully-functioning,
free trial. Go ahead, try it out.
Our staff is goal oriented and dedicated to getting the contact information
of people that are interested in your products or services.
With our Embedded chat your customers do not even have to click a button to
chat, they are already in a chat when they enter the site, If they ignore
the chat window we have the power to invite them to chat with a floating
invitation. Why would you want to do that Direct contact with the customer
means customer confidence, conversion rates and sales skyrocket.
Imagine this:
Let's say that your customer contacts you for a live chat through our
Embedded Chat. They'd like to buy a pack of 40 burritos, but they only see
packages of 15. Not only can you push them to the page showing a pack of 50
burritos, you can offer them a discount and assist them through the purchase
process all through Embedded Chat. The customer is happy, they commend you
for the great customer service, and you've got more money in your pocket.
Embedded Chat helps organizations to increase online Sales Revenue and
provide better Customer Service - all in Real Time - and literally with a
mouse click
Embedded Chat provides instant benefits and maximum returns to its clients.
Embedded Chat Significantly increases new customer acquisitions and online
conversions.
Embedded Chat Generates qualified leads from your online marketing and
print campaigns.
Embedded Chat Decreases shopping cart abandonment rates and customer churn.
Embedded Chat Increase sales, reduce support costs, and attain rapid ROI.
Embedded Chat Services more prospects and customers, more efficiently.
Embedded Chat Maximizes customer satisfaction, loyalty and profit.
Imagine if your customers can get answers and live help to their questions
from you right into right now. No matter how informative your website is,
people will have more questions about your services or product. Our live
chat software will increase trust by making your website come alive.
* Instead of leaving visitors to navigate your site by themselves, you
would be in control. You would be able to engage your customers and
proactively guide them right toward a sale.
* No longer will you worry about losing a potential customer because a
simple question wasn't answered.
* You will increase your visitors' confidence by showing there is a real
live person behind your site.
Increase your sales: Chatters are 3 times more likely to buy from the
site
Site visitors that are provided the option to chat with a sales expert are
25-200% more likely to make purchases from your website. Online shoppers are
still wary to trust a website's catalogue technology and purchasing
procedure, and sometimes even the most web savvy shoppers need help. With
Embedded Chat, your business can offer your customers the information and
online confidence they seek. Agents can use the opportunity to develop
relationships with customers and suggest items to upsell.
Improve your customer service: Chatters are twice as likely to return to the
site.
90% of customers prefer live human interaction for online assistance, but
80-90% of the same customers would rather not use the phone. Using Embedded
Chat, customers avoid the hassles of navigating phone systems or waiting on
hold for up to an hour to speak with a phone agent. Many will simply give up
and find your products elsewhere if they can't get help instantly. This is
especially true among dial-up internet users.
Increase your online revenue
Chatters are 3 times more likely to buy from your site having spoken with
your sales staff
Increase staff performance
Each chats is automatically saved online so you can access them at the end
of every day to see how your staff performed. This will give you a better
idea of what your customers requests are and how your staff are handling
them.
Reduce your staff costs
One operator can easily handle multiple customers at the same time.
Resolving customer support issues with Embedded Chat is up to 90% less
expensive than a phone call or an email. By incorporating the live chat
button into the emails your staff send to customers you also make it easier
for customers to respond quickly.
Increase your customer satisfaction and loyalty
Your customers experience shorter waiting time and get immediate answers to
their questions.
24-7 Chat Answering
Embedded Chat has a 24 hour call centre that can answer your visitors chats
for you after hours and on weekends, passing you on leads so even when your
staff have left for office we are still gathering leads to pass onto you the
next business day.
Hosted and Client Hosted
Embedded Chat has both a hosted version (stored on our servers) and a client
hosted (stored on your servers) program allowing you more flexibility.
Report Download
At the end of each day our team can send you a file with all the chats that
took place that day. This can be printed off for you to browse no the way
home. This allows an excellent insight into what your staff are saying to
customers and what your customers are looking for.
Prechat Survey
Embedded Chat allows you to set-up a series of questions for your visitors
to answer once theyve clicked the chat button. This will help you to build a
profile of your website visitors before you begin chatting. You can also use
this to follow up with our website visitors.
Customised buttons
Our team can provide you with well-designed buttons to attract your visitors
attention. We can also customise the chat interface to ensure that it blends
with your website.
Canned Responses
You can save standard responses to questions to answer typical customer
queries. This saves time and enables you to word your responses well.
Chat logs
All chats are automatically saved on a secure database which you can view 24
hrs 7 days a week.
Reporting
With Embedded Chat you can use chat logs to run reports on various criteria
such as operator reports, reports by date, reports by keyword(s), reports by
prechat survey criteria
Postchat Survey
Your sales staff can rank conversations based on the quality or subject of
conversation.
Chat Alert
Your staff are alerted every time a customer enters a chat through a beeping
sound on their pc.
Multiple Chats
Your staff can have chats with multiple visitors at the same time.
Chat Transfers
Your staff can pass a visitor to another staff member to handle their query.
Operator Interchat
Your staff can contact each other instantly with any queries they may have.
Multiple Operators
You can have multiple staff online using Embedded Chat
Push Page
Quite often you will have a web visitor who cant navigate to a particular
page on your website. Using Embedded Chat you can push the page to them so
all they have to do is to click the link and they are there. Quite a number
of our clients use this to encourage their web visitors to register for a
particular product.
Hosted Software
The chat interface can be loaded onto our server so that you don't have to
do anything more than place the live chat button on your web pages. In fact,
we can also do this for you if you don't have time. We also have a non
hosted version which can be hosted by you on your servers.
Offline Email Form
Allow your visitors to leave a message if you are not signed in as an
operator. This message will be forwarded directly to your e-mail box.
Alternatively we also have the option of answering the chats for you after
hours too.
Customisable interface
This feature brings a little flare as it allows you o customise the look and
feel of your interface in seconds changing the colour of the interface, the
graphics and the fonts in the conversation with customizable colours, font
types, and sizes. Available for operator and visitor fonts.
Browser Compatibility
Embedded Chat is compatible with all browsers ensuring that you don't have
any frustrated chatter trying to get through.
Visitor history
Click the name of the visitor and see the past chats they had with your
company.
Typing indicator
A 'operator is typing' message indicator will appear which allows the other
party to know when you are typing.
Return Visitor Recognition
When customers connect with a chat, their network IP addresses are recorded.
When customers return, their presence is detected and prior chat histories
can be instantly accessed.
Chat Invite
You can now invite your web browsers into a chat in real manually or
automatically. This boosts interaction between your company and your website
visitors.
Visitor Monitoring
You can now monitor your website visitors in real time, see what web page
they are on, what search engine they came from and what keywords they used.

Adobe Programs: Conflicts and Networking help please

I don't know if this is the proper place to post but this is what I'm looking for. Any suggestions, thoughts or help would greatly be appreciated.
We are researching the possibility of using an outside IT Consultant for our computers and Adobe Software. Our IS team (about 10 people), while very good with networking PCs, are not familiar with Adobe software and how they interact with the hardware/computers and networks.
We have been struggling for a few years to get our machines to be at their best performance and efficiency, especially on large tradeshow graphics. We have had crashes and glitches since CS3, but we understand that their are many variables and they are not just Adobe product issues.
We are a large company but have only 3 designers. So we are trying to find our own help and do some of our own research on a resolution.
We are looking for someone who is PC mainly, but if you have a recommendation for anyone that networks macs also that would be great. We are currently on PCs with hopes of someday moving to macs.
If anyone knows of any business or independent contractor in the North Central Florida area please let me know.

We contacted Adobe but they said they can only give over the phone help and will not refer us to anyone.

Routes, gateways, and networks -- Help Please

Hi Linux gurus:
I have a problem that I know you will help me resolve...
I have two network cards in my Linux box.
1. public network:
10/100
192.168.1.102
default gw: 192.168.1.1
netmask: 255.255.255.0
I want this one routed to my router for internet/public use
2. private network 1000mpbs
192.168.2.181
default gw: none
netmask: 255.255.255.0
I don't want this one routed at all. It is used for backups, moving files, etc and is called by individual servers using /etc/hosts.
Now problem is that I can't get out and/or in to the box. It appears as though the default gateway on this system is 192.168.2.254. I set up the network via the gui and it appeared to be working, but alas it is not. It looks like things are only talking via the 192.168.2.X network, and that is not what I want...and from the outside world, nothing at all is talking to it.
Below is my ifconfig -a and my netstat -rn
Please help!
eth0 Link encap:Ethernet HWaddr 00:18:F3:E8:29:2A
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:193 Base address:0x8000
eth1 Link encap:Ethernet HWaddr 00:90:27:AC:7C:4D
inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5339 errors:0 dropped:0 overruns:0 frame:0
TX packets:1891 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:588251 (574.4 KiB) TX bytes:530473 (518.0 KiB)
eth2 Link encap:Ethernet HWaddr 00:0F:B5:43:16:D0
inet addr:192.168.2.181 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:300106 errors:0 dropped:0 overruns:0 frame:0
TX packets:617831 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:28009736 (26.7 MiB) TX bytes:585354764 (558.2 MiB)
Interrupt:217 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:816528 errors:0 dropped:0 overruns:0 frame:0
TX packets:816528 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:102034952 (97.3 MiB) TX bytes:102034952 (97.3 MiB)
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2
0.0.0.0 192.168.2.254 0.0.0.0 UG 0 0 0 eth2

Ok...I did the following:
route add default gw 192.168.1.1 eth1
route delete default gw 192.168.2.254 eth2
I am able to get out to the outside world and it seems to work fine, but just curious:
1. How do I keep this from reverting again? (I could put this in my own script, but would rather not hack it, but do it right)
2. Are my routing tables below correct now (it works I understand, but want to ensure it is done correctly).
3. What is this route for (in the below table) and is it needed?
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2
4. Since i'm relying on /etc/hosts files for the systems on the 192.168.2.X interface should there even be a route for this subnet?
updated routing table:
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1

J6480 wireless and network help please!

I have an officejet J6480 that has an error in printing system when printing wireless. Everything is configured correctly and my printer reads the router and connects. If this problem cannot be fixed, can i use an ethernet connection directly from printer to router and get it to work. I tried this but also got a failure to print message. Please help asap! Thank you

hello,
first, cancel the print jobs
then try to restart the print spooler of the computer (click start>run... then type services.msc)
look for print spooler in the list
right click on the print spooler and click restart
if that doesnt work, then do a partial reset on the printer
unplug the power cord from the back of the printer without pressing the on button
press and hold # and 3 and wait for 10 seconds
plug the power cord back
wait for the printer screen to lit up then release the # and 3
try to ping the printer
try to print a test page again
keep me informed..

2nd MBP has messed up my home network--help please

I have a linksys wireless router. I have a MBP 1.83 gz and my MBP 2.2 GZ just arrived today. I turned them both on, both will get onto my wireless network (which is WEP protected) and then after two or three minutes neither computer can go online. Instead of showing a full strenght airport icon (which is normally shown) it shows one bar missing on both computers' airport icon. If I reset the router, I can get on one computer and be online, but as soon as I add the other computer, then I am unable to surf.
I also noticed that if I restart my new MBP I have to restart the router to be able to go on line.
I imagine there is some setting in the router causing this, but my knowledge is very limted. Any suggestions or resources would be greatly appreciated. Thank you in advance and I will be sure to mark your reply as helpful.
Owen Pillion

My wireless router is set up as Automatic Configuration DHCP.
Each computer works fine without the other on. If both are on, my original one works, but the new one cannot get on line.
I do not know how to get the ip configurations of my mac (I wish I did--I dont even know what that is). And I do not know how to see if both are using the same ip address or how to tell the computers to use different ones.
I know that my wireless network has been working fine. I have even used a PC notebook, been able to enter the WEP password, and surf with the MBP on. But with two MBPs--No surfing happening.

I have lost my IMac email. Help please

I am not able to download emails on my IMac. It works on my IPad and IPhone but not ont he IMac.
Thank you so much for your help.
Lwking

In my case and others, installing Mountain Lion scrambled the settings for the Incoming Mail Server and the Outgoing Mail Server for EACH account and so I had to manually re-enter those settings.
You may need to open "Mail">click on the word "Mail" in the upper left hand corner of your screen in the menu bar> click on Preferences>click on "Accounts"> enter your "Incoming Mail Server" and "Outgoing Mail Server (SMTP)" settings that are provided by your ISP.
Hope this helps

CS5 Win7 Networking Help Please

I'm a home-based designer who needs nework help. I have CS5 Master Collection on a Win7 (Home Prem) computer which is peer-to-peer networked with 2 other Win computers (98 & XP). Win Exporer has no problem navigating anywhere on the network from any computer. However, Bridge CS5 on the Win7 computer (i5 cpu, 2.7GHX, 8GB Ram) shows "Lock" icons on all network locations; hangs when any network location is selected. Also hangs when launched from within Photoshop, Illustrator, or InDesign. I've searched these forums and tried various fixes having to do with security, permissions, firewall rules, clearing caches, etc. No luck. Adobe Support won't help me as it doesn't cover "network issues" such as mine. Their enlightened suggestion was to "move the files you want to browse onto the computer where CS5 is installed." Any real suggestions from anyone would be greatly appreciated. I'm not a programmer but I can usually doink my way to understanding.

Steve— Thanks for your suggestion. I didn't think to remap shared network folders, duh. (And even after Win7 Explorer forced me to do it to become part of network!) Previous versions of Windows allowed me as "owner" (administrator) to see, read, and write out of the root directory and all the other hard drives installed on networked computers. Win7 apparently doesn't or discourages it, even on the older computers, it seems (at least for amateur net administrators like myself). From Win7 Explorer I can and did remap target directories on the remote drives located on my Win98 and Win XP computers. Unfortunately now BridgeCS5 (on my Win7 computer) shows these remapped icons with big red "X"s through them. But these remote directories can be browsed and files manipulated. I still can't get BridgeCS5 on the Win7 computer to open from within PS, AI, or ID. But MiniBridge now works from within PS. If you have suggestions for fixing this BridgeCS5 functionality in AI or ID I'd appreciate it. I'll revisit your knowledge base and forums for this info because I'm spoiled by the way BridegeCS3 works on my WinXP computer. Otherwise I'll find ways to use Bridge outside of AI, ID, and the rest. Thanks again for helping me to get MasterSuiteCS5 to more closely fit the way I work. —Phil Smeiles

IMac 350mhz Networking Help?

Ok...I'm finally gonna try and set up a home network. Actually, I think I've already figured everything out. I've got this Mac, and older iMac 350mhz running OSX, and an even older HP Pavillion 433mhz running XP sitting here in the same room all networked together from my cable modem and a wired D-Link Router via Ethernet. I was originally going to punch a hole in the wall and put the iMac in my son's room which is right next door. Well, I got to thinking and thought wireless may be a better route to go since I'm not sure if I'll leave that iMac in there or move it downstairs.
I understand that I will nedd the wireless router. And I will need a USB transmitter/receiver for the iMac. However, since it's the old USB 1.0, I believe that speed will suffer a little. Is there any type of Ethernet (which the iMac has) that converts to a USB 2.0? Or better yet, is there any receiver/transmitter that plugs into the Ethernet rather than the USB? Curious due to the absolute limitations of upgrading these iMacs.
Thanks much,
Robert

nevermind

Imac newbie needs help please...

Hi - first, I know 'nothing' about macs, but I know PC stuff pretty well. I'm asking this question for a friend who knows 'nothing' about computers at all. Here goes...
My friend inherited an imac. I haven't seen it, but someone told him it is an "original" Imac with OS7. He "thinks" it has a USB port, and it must have a dialup modem since the previous owner went online with it. I don't think it has an ethernet port (would a model this old come with ethernet?)
My friend lives in an area with free WiFi service.
His question is... can his Imac use this free service - and, if so, how can he do it? He asked a guy at a mac store and was told that he would need OS9 to use the free wifi. Is that true? Isn't there a way he could buy an external wireless modem and somehow get the wifi signal?
Sorry I don't know more about his mac - hopefully if you need more info I can get it from him - just lemme know what you need to know, and how he can find it.
Thanks,
Donk
Imac Mac OS 8.6 or Earlier

Hello and Welcome to Apple Discussions.
All iMacs have at least 10/100BaseT Ethernet.
All iMacs have at least 2 USB(1.1) ports.
The earliest iMac shipped with OS 8.6.
The earliest iMac that had WiFi was the 400MHz model in around 1999. This model too shipped with a version of 8.6 although most iMac 400MHz shipped with OS 9. WiFi is certainly available in OS 9 but I'm unsure about OS 8.
All iMac CRT/G3 specs can be found here. This should give you a better idea what you're dealing with.
Your friend would also need either a USB/WiFi adaptor (this will be a pita as drivers that old will be difficult to find) or preferably a Ethernet/Wifi adaptor (aka Wireless Bridge); nil drivers required.
You don't need a modem to access a WiFi network.
WiFi on a Mac is called Airport.<p<p>So...
Get a copy of OS 9 here ($33 and then use the free updates here.
and a Wireless Bridge from any computer store.
These are old old computers now and getting them to play with modern kit can be a challenge. However their is a wealth of experience on these discussions so feel free to ask questions.
HTH
mrtotes

IMac Graphics card (help please!!)

Hi there!
I am using the newest iMac 21.5 inch with the 2.7 ghz i5 and the nvidia gt640m. I really want to play RCT3 which was released on appstore not too long ago, and the macchecker on some gaming website says my graphics can handle, but the list of supported graphics cards on the mac appstore page for the game lists the following as compatable:
NVIDIA GeForce 8600, 8800, 9400, 9600, GT 120, 320M, 330M, 650M
Does this mean that my GT640M will not be supported like the GT650M and other lower end graphics card are? I know that this game also supports intel HD 4000, I might even be willing to purchase an MBP with HD 4000 to play this game (if I haveto.) Any help would be greatly appreciated.

Hi, I'd tend to think they just haven't tested the 640M, since far lesser cards are supported.

Apple Remote app on wired network: help please

I am trying to use the remote app to control my apple tv. I noticed that my bedroom apple tv unit was showing up in my app but not the living room apple tv. After further inspection I found that the ethernet cable was not plugged into the bedroom apple tv unit so I was on wifi to control the apple tv.
We do a lot of streaming in my house and having 4 apple tv's on wifi would just kill the streaming. From what I see, the device(iPhone) using the remote app and the Apple TV you want to control have to be on the same wifi network.
Is there a way to use the remote app when the apple tv's are connected via ethernet cable? They are still on the same network but the app doesn't recognize them if they are on ethernet.
Basically if I unplug my ethernet cables from the apple tv's the app works but when the ethernet is plugged in the app doest see the apple tv's present. Any way around this issue>

I am definitely on the same network. After about an hour I finally got it to work. My apple tv was plugged into my apple wifi router which is connected to a 24 port switch. I connected the apple tv directly to the switch and it came up instantly. I then plugged it back into the apple router and it continued to work. I am not sure why none of the apple tv's would not initially work when plugged in directly to the router since it is the same network. So I did this to all the apple tv's and they are all now working.
Home sharing was enabled on all the apple tv's. The only thing I did was connect to switch first(got a good connection via the app) then reconnected it to the apple wifi router.

WRT160n set up trouble in existing network -help please

It's a small business office. Cable modem comes into a Netgear smart switch, which distributes LAN to desktops and a older Wireless router.
So I hook up the router as directed, setup won't complete... error no router found.
Of course 192.168.1.1 is the netgear switch, so that's not available.
Grr.
I tried seemingly everything. Plugged it into the cable modem Lan ports, plugged it into the Netgear Lan posrt, put it in serial with a computer into the Netgear. Blah.
There's no usb connector to port into.
Ideas?
Thanks in advance!

Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...Under the Setup tab,the router ip address is 192.168.1.1...So change it to 192.168.1.2.Power cycle the entire network and it should work.

Card reader not recognizing CF in leopard on new 24" Imac.. HELP PLEASE!!

I have a new 6-in-1 card reader that my new IMac (Leopard, 24", 2.4gHz, 2gb RAM) won't fully recognize. The thing is, it recognizes it if I put an SD card in it, but not a CF card. (This is annoying because one of my cameras uses CF). The stranger thing is that if I boot XP in parallels on this IMac, XP recognizes both the SD and CF cards just fine in the reader, and the files import flawlessly. This makes me think the computer, the connection, the card, and the reader are not the problem. My Macbook also recognizes the CF card without any problems, so it's not just that the card reader isn't fully Mac compatible. Any ideas? It's super annoying and I'd rather not buy a different card reader when it seems so close to working... I can import photos through parallels and XP, but that's annoying and there should be a way to get this fancy machine to see the CF card in the reader...

Not being able to transfer photos from CF cards using my USB2 card reader, I connected my Canon D60 camera to my MacBook using the original Canon cable. The Mac doesn't see that either and there appear to be no relevant rivers on the Canon site. Is there a problem with USB2 under Leopard? Is Apple aware of or working on this?

17" MacBook Pro and G4/500mhz Tower Networking HELP Please

I have a G4/500mhz system of which I've upgraded with an OWC Mercury 1.2ghz Processor and 1gb of ram, I bought a D-Link so the G4 is Bluetooth ready.
This is what I want to do wireless: Connect to the Internet (cable) to my New Macbook Pro and also my G4
Basically to keep this simple I want wireless from the G4 to the Macbook Pro and vice versa and being able to access my Cable Modem Wireless to my Macbook Pro...
Please give me the specifics of how to create this please and I will be greatly appreciative to you.....
I want the fastest and the most reliable that is the most important...
Ex: Airport, Wireless Router Software: Apple Remote Desktop 3.0 ?

Great Help

IMac / PC networking help please!

Similar Messages

Maybe you are looking for