IMac reboots every day at 5:56 AM
Recently my work hours changed, so I'm now up at 5:30 AM instead of 6:30. Because of this, I was able to observe that my iMac G4 - sound asleep as I recently was at this hour - reboots every day at 5:56 AM precisely. Obviously some timed script is running, but I can't figure out what it is, where it "lives", and how to stop it. I have the Cocktail utility, so I ran the daily "cron" script - but the system did not reboot. The only things connected to the iMac are speakers, a Lacie 250 GB Firewire HD, and a M-Audio Keystation 49e USB keyboard (not powered on). I have no idea how long this has been going on since I've never been up this early until recently. Anyone have any ideas on what could be causing this?
Problem solved - and boy do I feel stoopid!
After checking out all the suggestions offered, I went to visist the iMac in question (located in the "family" room in the basement) at 5:54 AM this morning, coffee in hand. At precisely 5:56 AM (by my watch) the UPS shut down for a moment and then turned back on. The UPS battery is obviously fried, so the UPS shutdown/restart "reboots" the iMac (set to restart after power failure). Since the iMac is in the basement, I must have missed the warning beeps that signal battery failure. So what causes the UPS to restart at 5:56 AM? I had this experience years ago at a firm located in an industrial park - some nearby factory had machinery that started up the same time every day - heavy duty stuff - and it sent a huge "spike" down the line which wrecked havoc with out network backups. I suspect the same thing here - something "heavy duty" goes on-line at 5:56 AM and creates a power "spike" (or whatever) - the UPS senses the "spike" and shuts down to "spare" the devices connected to it, but since it can no longer provide power while it's off, it effectively "reboots" the iMac.
Solution - buy a new UPS!
Thanks to all who chimed in - sorry it wasn't something more exotic!
Robert
Similar Messages
-
Airport suddenly needs to be rebooted every day
I have a client with an AirPort Extreme. He has been using it for several
years without a problem. Suddenly EVERY day (definitely when he wakes up in
the morning and sometimes at other points in the day - as far as I can tell
when the computer is idle) the status light blinks yellow.
When this happens he looses the wireless connection. If I plug an ethernet
cable into the AirPort it shows up under the AirPort Admin Utility, but is
unable to read the configuration to determine what the AP is unhappy about.
A simple power cycle fixes the problem.
I first thought it might be a problem with the AP so I replaced it with a
new one (having the latest firmware).
Same problem.
I have since replaced all ethernet cables and the Time Warner Road Runner
cable modem. Same problem.
I even tried a LinkSys router in front of the AP and put the AP in bridge
mode, but no joy.
A few other points:
If I sleep the MacBook I CAN NOT get the problem to happen (I am only
waiting max 10 min)
We "coincidentally" replaced his 3 year old MacBook with a new one (with OS
10.61) a few days before this problem started. I cant see how this could be
the problem as it happens when the computer is sleeping and the fix is to
reboot the AP not the computer, but the timing is awfully suspicious.
I dont know what else to try. Any ideas?
ThanksIf both devices are producing a wireless network, there is an increased chance of wireless interference between them, especiallyi if they are located in the same room. If you normally only one use one wireless network, it would make sense to turn the other one off.
-
Firewall RV 220W reboots every day
English
Hello, like the tittle says every day at leats once this firewall restarts, and when all the services are up again the router doesn´t give any ip to the lapstops in the lan, so i need to reboot the firewall one more time ( and that takes about two minutes each time) and then it works.
I would like to know why this happing to this device.
Spanish:
Hola, como el titulo dice este firewall se reinicia por lo menos una vez al día, y cuando todos los servicios están arriba nuevamente, el router no da ip a ninguno de los laptops dentro de la red local, así que es necesario reiniciarlo una vez más ( y eso toma alrededor de 2 minutos cada vez)y después de eso funciona.
Me gustaría saber por que sucede eso en este dispositivo.
SaludosI too had a similar situation with that router doing random reboots. I saved all configuration information, did a hard factory reset, then installed the latest firmware 1.0.5.8 and re-entered all the configuration settings BY HAND. Do not restore the configuration file from the prior setup. (Very important according to Cisco). Be sure to reboot after entering all the configuration settings.
It has operated rock solid after that with no errors logged or unwanted reboots.
Hope this helps.
Ron -
Wrt600n connectivity loss requiring router reboot every day
the fun never stops with this router. i have to say that out of the 5 previous AP's / routers, this one has had more issues than the previous 5 combined.
at any rate, i am now seeing the ap lose all network connectivity every day, or every other day at best. i have to then reboot the thing, and the cycle repeats.
has anyone else seen this behavior, and if so any suggestions on how to fix it?Have you tried to upgrade the firmware of your Router, If not then you can upgrade the firmware of your Router and i think this might solve the problem.Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop..
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router... -
OS X server shut down , and reboot every days at 4 am
I shut down my server and every days at 4am , the server is rebooted
I don't activate the auto start function
See my system.log
Jun 20 18:42:07 jerome ntpd[136]: time reset -1.165220 s
Jun 20 18:45:27 jerome shutdown: halt by jmorgado:
Jun 20 18:45:29 jerome SystemStarter[3642]: authentication service (3677) did not complete successfully
Jun 20 18:45:30 jerome SystemStarter[3642]: IP Failover (3685) did not complete successfully
Jun 21 04:00:02 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 21 04:00:02 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 21 04:00:02 localhost kernel[0]: migtable_maxdispl = 70
Jun 21 04:00:02 localhost kernel[0]: 93 prelinked modules
Jun 21 18:38:24 jerome SystemStarter[5371]: IP Failover (5401) did not complete successfully
Jun 21 18:38:25 jerome launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/serialnumberd"[184]: exited abnormally: Terminated
Jun 22 04:00:01 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 22 04:00:01 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 22 19:25:47 jerome SystemStarter[5645]: IP Failover (5675) did not complete successfully
Jun 22 19:25:48 jerome launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/serialnumberd"[185]: exited abnormally: Terminated
Jun 23 04:00:01 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 23 04:00:01 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 23 04:00:01 localhost kernel[0]: migtable_maxdispl = 70I shut down my server and every days at 4am , the server is rebooted
I don't activate the auto start function
See my system.log
Jun 20 18:42:07 jerome ntpd[136]: time reset -1.165220 s
Jun 20 18:45:27 jerome shutdown: halt by jmorgado:
Jun 20 18:45:29 jerome SystemStarter[3642]: authentication service (3677) did not complete successfully
Jun 20 18:45:30 jerome SystemStarter[3642]: IP Failover (3685) did not complete successfully
Jun 21 04:00:02 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 21 04:00:02 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 21 04:00:02 localhost kernel[0]: migtable_maxdispl = 70
Jun 21 04:00:02 localhost kernel[0]: 93 prelinked modules
Jun 21 18:38:24 jerome SystemStarter[5371]: IP Failover (5401) did not complete successfully
Jun 21 18:38:25 jerome launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/serialnumberd"[184]: exited abnormally: Terminated
Jun 22 04:00:01 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 22 04:00:01 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 22 19:25:47 jerome SystemStarter[5645]: IP Failover (5675) did not complete successfully
Jun 22 19:25:48 jerome launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/serialnumberd"[185]: exited abnormally: Terminated
Jun 23 04:00:01 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 23 04:00:01 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 23 04:00:01 localhost kernel[0]: migtable_maxdispl = 70 -
Problems with HH5 have been going on too long now. Never had such a bad router (and this is second HH5 I have had). Old Billion router was up for months at a time. HH5 drops and reboots most days when in use, normally when working hard (online gaming via ethernet).
Time and date Message
20:54:01, 14 May.
( 38.000000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
20:53:41, 14 May.
( 18.140000) System start
22:04:04, 13 May.
( 37.780000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
22:03:44, 13 May.
( 17.910000) System start
22:58:20, 12 May.
( 38.070000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
22:58:00, 12 May.
( 17.800000) System start
21:46:14, 30 Apr.
( 35.830000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
21:45:54, 30 Apr.
( 16.270000) System start from GUI
16:13:20, 24 Apr.
( 37.100000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
16:13:00, 24 Apr.
( 17.260000) System start
08:09:41, 24 Apr.
( 36.500000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
08:09:22, 24 Apr.
( 17.340000) System start
02:57:38, 24 Apr.
( 36.460000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
02:57:19, 24 Apr.
( 17.470000) System start
21:44:20, 23 Apr.
( 36.040000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
21:44:00, 23 Apr.
( 16.300000) System start
21:35:13, 21 Apr.
( 36.310000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
21:34:53, 21 Apr.
( 16.240000) System start
12:08:35, 19 Apr.
( 34.930000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
12:08:16, 19 Apr.
( 16.220000) System start from GUI
16:30:47, 18 Apr.
( 37.240000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
16:30:28, 18 Apr.
( 18.110000) System start
02:04:28, 18 Apr.
( 36.650000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
02:04:10, 18 Apr.
( 18.490000) System start TR069
22:51:36, 17 Apr.
( 37.190000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
22:51:17, 17 Apr.
( 18.130000) System start
02:14:10, 17 Apr.
( 38.020000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
02:13:50, 17 Apr.
( 18.260000) System start
02:43:03, 14 Apr.
( 40.950000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
02:42:40, 14 Apr.
( 18.150000) System start
18:32:13, 05 Apr.
( 38.190000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
18:31:53, 05 Apr.
( 18.080000) System start
13:34:18, 28 Mar.
( 37.940000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
13:33:58, 28 Mar.
( 18.100000) System start
19:16:10, 27 Mar.
( 35.910000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
19:15:50, 27 Mar.
( 16.250000) System start from GUI
17:02:39, 22 Mar.
( 38.050000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
17:02:19, 22 Mar.
( 18.080000) System start
04:16:07, 20 Mar.
( 37.800000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
04:15:47, 20 Mar.
( 18.080000) System start
11:47:03, 12 Mar.
( 36.730000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
11:46:44, 12 Mar.
( 18.140000) System start
19:39:36, 06 Mar.
( 38.920000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
19:39:15, 06 Mar.
( 18.150000) System start
03:22:52, 03 Mar.
( 37.800000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
03:22:32, 03 Mar.
( 18.140000) System start
03:15:15, 01 Mar.
( 38.000000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
03:14:55, 01 Mar.
( 18.160000) System starton Exchange FERNDOWN is served by Cabinet 11
Featured Products
Downstream Line Rate(Mbps)
Upstream Line Rate(Mbps)
Downstream Range(Mbps)
Availability Date
HighLowHighLow
FTTC Range A (Clean)
54.4
35.5
13.9
8.4
Available
FTTC Range B (Impacted)
46.8
25.7
13.9
6
Available
WBC ADSL 2+
Up to 8
5.5 to 12.5
Available
WBC ADSL 2+ Annex M
Up to 8
Up to 1
5.5 to 12.5
Available
ADSL Max
Up to 5.5
4.5 to 8
Available
WBC Fixed Rate
2
Available
Fixed Rate
2
Available
Other Offerings
Fibre Multicast
Available
Copper Multicast
Available -
Why is my iMac crashing every day?
I've been looking around different forums to try and find out why mine is doing this, but people usually want to see the report, so I have attached mine below. My iMac has been crashing on me pretty regularly for the last few months. It didn't do it until I installed new RAM in it, but when I check "About this Mac" it shows that it was all installed correctly. It usually crashes when I have several programs open but sometimes it crashes right when I'm shutting it down. Any help is massively appreciated.
Interval Since Last Panic Report: 48947 sec
Panics Since Last Report: 11
Anonymous UUID: 137EDE7C-77FB-475E-8110-0AB133808228
Sun Sep 23 00:38:41 2012
panic(cpu 3 caller 0xffffff80002c266d): Kernel trap at 0xffffff80002901d0, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x000000005244a000, CR3: 0x000000008088d012, CR4: 0x00000000000606e0
RAX: 0x0000000000000001, RBX: 0x0000000000003000, RCX: 0xffffff8022a20900, RDX: 0x00000000003cccc2
RSP: 0xffffff81998dbda0, RBP: 0xffffff81998dbdc0, RSI: 0x000000002e318fc0, RDI: 0xffffff8007953660
R8: 0xffffff81998dbf08, R9: 0xffffff81998dbef8, R10: 0x00000000524b6000, R11: 0x0000000000000000
R12: 0xffffff8007953660, R13: 0x0000000000000000, R14: 0xffffff802881b0a0, R15: 0x8000000000000000
RFL: 0x0000000000010286, RIP: 0xffffff80002901d0, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x000000005244a000, Error code: 0x0000000000000000, Faulting CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff81998dba60 : 0xffffff8000220702
0xffffff81998dbae0 : 0xffffff80002c266d
0xffffff81998dbc80 : 0xffffff80002d7a1d
0xffffff81998dbca0 : 0xffffff80002901d0
0xffffff81998dbdc0 : 0xffffff800026c9a3
0xffffff81998dbf40 : 0xffffff80002c1f0b
0xffffff81998dbfb0 : 0xffffff80002d7941
BSD process name corresponding to current thread: GarageBand
Mac OS version:
11D50d
Kernel version:
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
Kernel UUID: 7B6546C7-70E8-3ED8-A6C3-C927E4D3D0D6
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 736493718899
last loaded kext at 35749900404: com.apple.driver.AppleBluetoothHIDKeyboard 152.3 (addr 0xffffff7f81c8c000, size 12288)
last unloaded kext at 136973037899: com.apple.driver.AppleUSBUHCI 4.4.5 (addr 0xffffff7f80a31000, size 65536)
loaded kexts:
com.apple.driver.AppleBluetoothMultitouch 66.6
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleHDA 2.1.7f9
com.apple.driver.AppleMikeyDriver 2.1.7f9
com.apple.kext.ATIFramebuffer 7.1.8
com.apple.driver.AGPM 100.12.42
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.ATIRadeonX3000 7.1.8
com.apple.driver.AppleBacklight 170.1.9
com.apple.driver.AppleLPC 1.5.3
com.apple.driver.AppleIntelHD3000Graphics 7.1.8
com.apple.iokit.SCSITaskUserClient 3.0.3
com.apple.driver.AppleUSBCardReader 3.0.1
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AirPort.Atheros40 503.60.3
com.apple.iokit.AppleBCM5701Ethernet 3.0.8b2
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.3.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.1
com.apple.driver.AppleIntelCPUPowerManagement 167.3.0
com.apple.driver.AppleBluetoothHIDKeyboard 152.3
com.apple.driver.AppleHIDKeyboard 152.3
com.apple.driver.AppleMultitouchDriver 220.62.1
com.apple.driver.IOBluetoothHIDDriver 4.0.3f12
com.apple.kext.triggers 1.0
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.driver.DspFuncLib 2.1.7f9
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleUSBAudio 2.8.2f5
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOBluetoothSerialManager 4.0.3f12
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.driver.AppleHDAController 2.1.7f9
com.apple.iokit.IOHDAFamily 2.1.7f9
com.apple.iokit.IOAudioFamily 1.8.6fc6
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.driver.AppleThunderboltEDMSink 1.1.3
com.apple.driver.AppleThunderboltEDMSource 1.1.3
com.apple.kext.ATI6000Controller 7.1.8
com.apple.kext.ATISupport 7.1.8
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.driver.AppleIntelSNBGraphicsFB 7.1.8
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.AppleThunderboltDPOutAdapter 1.5.9
com.apple.driver.AppleThunderboltDPInAdapter 1.5.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.5.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.3f12
com.apple.driver.AppleUSBBluetoothHCIController 4.0.3f12
com.apple.iokit.IOBluetoothFamily 4.0.3f12
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.3
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.iokit.IOAHCISerialATAPI 2.0.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.3
com.apple.iokit.IOUSBMassStorageClass 3.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.3
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.driver.XsanFilter 403
com.apple.driver.AppleThunderboltNHI 1.3.2
com.apple.iokit.IOThunderboltFamily 1.7.4
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IO80211Family 412.2
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.3
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4
Model: iMac12,2, BootROM IM121.0047.B1F, 4 processors, Intel Core i5, 3.1 GHz, 14 GB, SMC 1.72f2
Graphics: AMD Radeon HD 6970M, AMD Radeon HD 6970M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x01BA, 0x202020202020202020202020202020202020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x01BA, 0x202020202020202020202020202020202020
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x01BA, 0x202020202020202020202020202020202020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.61.5-P2P
Bluetooth: Version 4.0.3f12, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Turtle Beach P11 Headset, 0x10f5, 0x0231, 0xfa120000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6Ok I installed rember and ran it. Sure enough it detected problems. Here is the log, I certainly can't make any sense of it.
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
Mac OS X 10.7.3 (11D50d) running in multiuser mode
Memory Page Size: 4096
System has 4 Intel core(s) with SSE
Requested memory: 9997MB (10483273728 bytes)
Available memory: 9997MB (10483273728 bytes)
Allocated memory: 9997MB (10483273728 bytes) at local address 0x0000000101000000
Attempting memory lock... locked successfully
Partitioning memory into 2 comparison buffers...
Buffer A: 4998MB (5241636864 bytes) starts at local address 0x0000000101000000
Buffer B: 4998MB (5241636864 bytes) starts at local address 0x00000002396d0800
Running 1 test sequence... (CTRL-C to quit)
Test sequence 1 of 1:
Running tests on full 9997MB region...
Stuck Address : setting 1 of 16 ok
Linear PRN : setting 1 of 16 ok
Running comparison tests using 4998MB buffers...
Random Value : \ ok
Compare XOR : ok
Compare SUB : ok
Compare MUL : ok
Compare DIV : ok
Compare OR : ok
Compare AND : ok
Sequential Increment: ok
Solid Bits : setting 1 of 64 ok
Block Sequential : setting 1 of 256 ok
Checkerboard : setting 1 of 64
FAILURE! Data mismatch at local BUFA address 0x0000000141f6f2c8, BUFB address 0x000000027a63fac8
BUFA Data: 0xaabaaaaaaaaaaaaa, BUFB Data: 0xaaaaaaaaaaaaaaaa
Bit Spread : setting 1 of 128 -
WRT54GL disconnects frequently, have to reboot every day. Help?!
Hi All,
I'm quite tech savvy having been in IT for over 10 years, but my WRT54GL has always given me some trouble, but since updating to the latest firmware I now have to reboot it daily. I have downloads going overnight and by the time the morning comes, none of the computers can connect wirelessly and even the wired connection can't ping the router, so I unplug it and plug it back in and it works for a while, but by the next morning it all happens again. I set the MTU per the solution/instructions here: http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4031&lid=
(1300, ISP pinged at 1272 and but nit higher) but it doesn't seem to have helped. Any tips?
Thanks!
BCheck the firmware version from the status page of the router ...if required upgrade download the latest firmware from http://linksys.com/download ... After upgrade reset & reconfigure the router ..
-
My airport express needs to be rebooted every day, what's wrong?
Does the fact that I have a router and the airport express cause some redundancy?
If both devices are producing a wireless network, there is an increased chance of wireless interference between them, especiallyi if they are located in the same room. If you normally only one use one wireless network, it would make sense to turn the other one off.
-
When I try to use iTunes to sync numbers doc from my iMac to my iPad, it shares an original version as installed over a year ago. I modify this doc every day and store it to documents, but the iPad won't import it. It doesn't appear as an existing doc on the menu.
Everything is updated. I got the later versions of numbers for both units, the iMac is running Mavericks, and the iPad is only one year old, but as I recall iOS 7 came out after, so I upgraded the pad and my phone.
-
The new firefox twitter app (mini tab on left of page) is great - except it disappears every time I shut down the computer and I have to remove and then reinstall it every day!?? It won't appear on the page until I do. I am working on an iMac - if that is causing the problem ...? Thanks.
Eustace, thank you so much for writing back. I will try what you suggested!!
thx for your reply - apparently when I went to the Apple store a long time ago, they restore maybe photos and itunes etc from my external hard drive (passport). I guess at that time they reinstalled an earlier operating system than my macbook came with and that somehow corrupted FileVault. apparently there was no sparse bundle (whatever that is) for my old admin account and they said that ever since the install of the older OS that it was actually NEVER backing up anything in my admin account.
Then, I bought Time Capsule and starting backing up to that instead. I started having problems with it being slow etc and then StartUp Disk full errors and didn't know what to do, so I "Restored" from Time Capsule and that's when I lost everything in my Admin account and was locked out when I tried to log in - it said File Vault error ..."
anyway - that's THAT sad story. I was told to create a new admin account and I've basically been trying to start over - even though I have a partial save of my computer in Crash Plan and I DO see a sparse bundle listed in there, but I just don't know enough about computers to know if it's something I can get back or if I am just totally doomed.
I'm afraid to reinstall anything because if there is even a remote shot that the other files are still floating around in my computer, I feel like that chance will be shot forever. I need to hire McGee from NCIS, I just KNOW he could get those files back for me!!! -
SRW2024 rebooting every 50 days
HELLO WORLD
We have two SRW2024 which has a strange behavior. both of them rebooting exactly every 50 days.we face everytime a short outage of the network traffic.
Model Name SRW2024
Hardware Version 00.03.00
Boot Version 1.0.1
Firmware Version 1.2.2
Is this a known issue? In the support section I found a firmware 1.2.2b. I cant find any release notes and I'm asking myself, if this FW version would solve this automated reboot?Hello Ivor
thank your asking back.
I'll post the case number tomorrow. in the meantime I'd like to answer your questions :
Issue 1 - reboot every 50 days issue
- Based on the information that was provided it appears that you have a syslog server. Does the syslog server log every 50 days a startup syslog message (for example: %INIT-I-Startup: Cold Startup)?
>>> After I figured out the issues for the first time I configured the Switch for sending the mesages to our log server. yesterday was day 25 as I posted my last message. the Issue 2 happens and I need to wait now another 50 days.
- How is the system uptime measured (which tool, how does the tool measure it)?
>>> the system uptime is measured with cacti.net monitoring by using the SNMP read community OID .1.3.6.1.2.1.1.3.0
- Configuration of the device
>>> the switch has no special configuration. just used as a plain (unmanaged) switch within a LAN. the switch is used in a audio streaming environment. we produce corporate webradio streams for our customer. therefore the switch is used 24/7 with a average load of 20 Mbit/s output on port g1 to the Firewall >>> WAN Switch >>> ISP Backbone
- The content of the memory & flash logs
>>>> I currently won't login again, because I fear of another reboot. the switch is in productive environment and another forced cold startup will cause streaming interrupts for our customers ! I try to access with a IE6 standalone installation from Multiple IE (http://tredosoft.com/Multiple_IE) and keep you posted on that
- Is there some kind of automatic process in the network that occurs every 50 days?
>>> no automatic processes within the LAN
Issue 2 - fatal error
- Which build of IE 8 is used?
>>> the latest after updating from IE7 to IE8 (MS update function) : Version 8.0.6001.18702
- Are there any plugins in IE 8?
>>> just two plugins automaticly installed from Java are installed see below :
Name: Java(tm) Plug-In 2 SSV Helper
Publisher: (Not verified) Sun Microsystems, Inc.
Type: Browser Helper Object
Version: 6.0.130.3
File date:
Date last accessed: Montag, 17. August 2009, 22:53
Class ID: {DBC80044-A445-435B-BC74-9C25C1C588A9}
Use count: 27
Block count: 0
File: jp2ssv.dll
Folder: C:\Program Files\Java\jre6\bin
Name: JQSIEStartDetectorImpl Class
Publisher: (Not verified) Sun Microsystems, Inc.
Type: Browser Helper Object
Version: 6.0.130.3
File date:
Date last accessed: Montag, 17. August 2009, 22:53
Class ID: {E7E6F031-17CE-4C07-BC86-EABFE594F69C}
Use count: 27
Block count: 0
File: jqs_plugin.dll
Folder: C:\Program Files\Java\jre6\lib\deploy\jqs\ie
- Was there any change in IE 8 from default configuration?
>>> No
- Does it always happen when logging in, or did it happen just once?
>>> It happens just once. before sometimes I was not able to see something in the browser. the web management site stayed in blue. the same behavior as already reported here in the forum.
- Did it happen immediately when logging in, or did it happen after navigating to a certain page / between pages?
>>> I loged in and navigated to the System log site.
My boss wants to replace the both switch by HP ProCurve switches if this happens frequently. So I cant promise that we keep this switches for another 50 days. I'll open a case number anyway and keep you informed
Regards
tom -
I utilize a trading platform for my work on a daily basis. They use shockwave flash in this platform. Every day it slows and then seizes up everything. I have to reboot my p.c. manually and then reload the platform. I have had my p.c. checked, talked to the IT people for the platform and everything comes back to flash. I've even uninstalled and re installed the program. It is a very annoying and causes major problems.
Help please.Post your question on a forum for the Flash Player
-
IMac27 reboots every few days with message "Restarted after error"
My iMac27 reboots every few days with message "Restarted after error". How do I find out what it is upset about so I can repair?
Visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Also, OS X- How to log a kernel panic and post a recent panic log (not a crash log.)
-
IPad constantly reboots every 2-3 minutes, after full recovery is not activated to wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more than 6 months, so please call customer service apple can not. by DFU also restored Official Ipad bought in a store in Russia. When buying activated immediately. IMEI 013311005943507. Help please! the official service Moscow representation FDA ipad offer to send in the U.S. for $ 500!
Hello this is happening to us also (minus the Bluetooth speaker). We can't figure out what is causing the data usage. I turned off mobile data as soon s I activated the device, and got the message that unless I am connected to WiFi.....(that is exactly what I wanted). We watched Netflix for about three hours, then the alerts started. Like you we have many devices connected and never used over 2GB now all of a sudden we have used it in a matter of hours. My husband called Verizon and got the usual doubting Thomas response. I understand that they don't know my device settings. So over the phone we check all the settings and turned off every possible culprit eating up the data and end the call. By now I have purchased another gig for the month! Assured we are NOT using mobile data, we continue on the IE path to bliss. HA! A few hours later I check the mobile data usage on the Verizon website and that darn thing is still using data. After two more phone calls and two VERY uneventful trips to the local store we were told to take out the sim card. This has stopped the data usage, but it defeats the purpose of having the data plan. I could have just stuck with my Surface. Verizon sent us a new sim card. Its been installed and I have set my homepage to Verizon mobile data usage (just kidding) but I am on that site a lot. I am surprised at the number of complaints about this device. When we called the Verizon support acted as though this was the first time they had heard about this. Loved your post, you should write for a living.
Maybe you are looking for
-
My iPod touch isn't recognized in iTunes, can't sync
when I try to sync my iPod with iTunes the Sync option is grayed out. There is no Sync in the bottom of the screen. I have stopped/started AMDS, uninstalled and reinstalled iTunes. My computer recognizes the iPod but I just can't sync the new song
-
Reg: work flow in abap corssapplications
Hi, I don't know about work flow, iam interested to work on work flow.So can u help me with detailed explanation. Thanks & Regards Ravicharan
-
How to allow pop-ups in Safari for all users
How do you allow Safari pop-ups for all users? After rolling out 50 Mac OSX with Safari comes default with Safari pop-ups disabled, now I must allow pop-ups for all users logging in. Good day!
-
How to do data quality check on XI?
Hi XI guru, I am working on a project, our architect want XI to perform some data quality check to make sure the message contains correct data in future processing. Is there any existing solution or walk arround for XI to perform the data quality che
-
hello could u tell me how to configure penalty on tds when payment date is exceeded.