Imac will not startup

Greetings,
my 2007 imac 2.8 GHz running OS 10.6.8 started acting funny - slow disc access, internet access, etc. then stopped working all together last night. Now will not startup, even with C key held down and trying to start from a disk. I see a blank gray screen with the whirling icon then screen goes blank and shuts off. I spent an hour with Apple tech support and nothing we tried will start up the computer. Question - is this how imacs die? If I buy a new imac, can apple salvage my data? and no, time capsule never worked on my computer so I was not able to back up the data.
Any advice would be much appreciated.
THanks everyone for reading this.

Zap the PRAM and Reset the SMC, then try again.

Similar Messages

  • Imac will not startup fully

    imac will not start up properly

    Hi Jane,
    Where exactly does it stop or have problems?
    Hold alt key or option key at startup, does that show boot choices?
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Does that work?

  • Imac will not Startup in Mac mode,  Goes straight to windows!

    I used to turn on my computer press option button and my option window will allow me to choose which I wanted. Either Mac or Windows. Now when I turn on and press option there is a grey screen and it loads up windows seconds later.
    I am lost and do not know what to do. I would appreciate someones assistance.

    Hi runskie
    Insert your Install Disk and restart holding the Option key to Boot into it, then skip over the Install section and select Disk Utility on the menu bar and repair the Macintosh HD volume!
    Dennis

  • TS1587 I tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks Maja

    My iMac won't start up, or wake from sleep.  I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up.  Turning it on, you can hear the fan run, but the display stays dark.  Any ideas what to do?  Thanks!

    Mac doesn't boot
    Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
    Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
    Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
    Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
    Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
    [edit]
    What to do
    First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
    If that doesn't help continue doing the steps from below:
    1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
    2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
    3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
    4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
    5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
    6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
    7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
    7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
    8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
    8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this.

  • IMac will not boot up when printer is plugged in USB

    After buying my new iMac (with Tiger) I successfully transfered everything from my old iMac (with Panther) and all was well.
    The problem is that when my printer (Canon Pixma MP130) is plugged in on start up, the iMac will not boot up (no gears turning on the white/grey screen). When I unplug the printer from the USB and start it up, it works fine. Its not a super big deal because I can just plug the printer in when I need it. But why does it do this?
    I foound on the internet someone else who had the same issues. It was suggested to him to search the printer manufacturers website for updated drivers. I did this, installed them etc..... still no luck.
    I am without any mac guru's here in Yellowknife......help!
    Angie

    Hello there,
    I hope it is OK to recycle this old thread.  I did not want to create a new one since I am experiencing the exact same issue as the original poster *flying girl* as well as other posters in the following threads:
    http://discussions.apple.com/thread.jspa?messageID=4190807
    http://discussions.apple.com/thread.jspa?messageID=3950255
    http://discussions.apple.com/thread.jspa?messageID=4201169
    http://discussions.apple.com/thread.jspa?messageID=4490899&#4490899
    http://discussions.apple.com/thread.jspa?messageID=4470944
    I have two Macs, a PowerBook G4 and an Intel iMac 20" (Aluminum)--please refer to my signature or profile for the specs of these machines.  Of course, I got the PowerBook before I got the iMac.  I am running the latest version of the Canon MP130 drivers, printer drivers version 4.8.3 and scanner drivers version 12.11.0, on both machines.
    When I turn on my PowerBook with the Canon PIXMA MP130 multifunction turned ON and connected via USB to the PowerBook, the PowerBook boots up just fine.  I have even experimented with both a USB hub and a direct connection to the Canon MP130, and the PowerBook boots fine in both instances.
    However, when I turn on my iMac with the Canon MP130 turned ON and connected via USB to the iMac, the startup tone plays, and then the iMac hangs at the blue/gray solid screen--it does not even show the Apple logo or the spokes--that is, until I turn the Canon MP130 OFF.  When I turn it off, the Apple logo appears, the spokes move, and my iMac boots up just fine.  And as long as the MP130 is OFF, I can boot the iMac fine from scratch too.
    I tried starting in verbose mode (⌘V) and single-user mode (⌘S), and the gray/blue screen still appears after the startup tone plays; again, if I turn the Canon MP130 OFF, the rest of the boot sequence resumes as normal, and only then do I get to see the descriptive text for those startup modes.  But the text goes by so fast that I miss most of it--I did manage to catch something that said something like "get full config descriptor = NULL," but I am not sure if that was the exact wording.  I would need a good camcorder or even just a digital camera or another device to capture exactly what the screen says in verbose mode.  If I had those options, I would post pictures here.
    I was thinking about contacting Canon, but since the issue happens on one Mac only, I figured they would tell me that it is a problem with my Mac.  So hopefully posting the information here is OK.
    Another key feature is that the Canon MP130 has a built-in card reader.  I made sure that my Startup Disk preferences were set to boot from the system drive, and they still are.  And I have reset the SMC and PRAM on the iMac.
    I would like to mention the following link:
    http://www.ehmac.ca/anything-mac/50389-intel-imac-wont-boot-when-canon-printer-p lugged.html
    If you go to page 2 on that above thread, it shows one user who allegedly physically disconnected the card reader connection from the inside of the Canon MP130 (I would NOT recommend that myself).  I just wonder if there is a more feasible resolution to this issue.
    Does anyone else experience the same issue with other printers or multifunctions?  Also, why does the issue occur only on my Intel iMac 20" (aluminum), and NOT on my PowerBook G4?
    Please let us know about your experience as it seems many of us are at a loss for a solution.
    Thank you very much for your help; we await!  :)
    Cya!
    \m/ Mad Metal Mage \m/

  • IMac will not boot up. Need to transfer data iMac (2006) iMac (2009)

    I have an iMac (built/sold late 2006 -400  Firewire) and an iMac (built/sold late 2009 - 800 Firewire).
    I have connected computers with a 400 to 800 Firewire cable.
    The old iMac will not boot to desktop. It was suggested to hold down the "T" key and then power up the iMac. This was done and the old iMac shows a "Y" shaped icon that appears to be a Firewire icon. The old iMac does not show up on the desktop of the new iMac.
    I would like to transfer data from the old iMac to the newer one. Suggestions ?
    Thanks.
    old iMac OS 10.4.xx
    new iMac OS 10.9.2

    She's holding T down on the old computer.
    Which is the way it has to be done. The old computer's hard drive will mount on the new computer.
    To use FireWire target disk mode
    Make sure that the target computer is turned off.
    If you are using an Apple portable computer such as a PowerBook or MacBook as the target computer, plug in its AC power adapter.
    Use a FireWire cable to connect the target computer to a host computer. The host computer can be powered on.
    Start up the target computer and immediately press and hold down the T key until the FireWire icon appears. The hard disk of the target computer should become available to the host computer and will likely appear on desktop. (If the target computer is running Mac OS X v10.4 Tiger, you can also open System Preferences, choose Startup Disk, and click Target Disk Mode. Restart the computer and it will start up in Target Disk Mode.)
    When you are finished copying files, locate the target computer's hard disk icon on the desktop of the host computer and drag it to the Trash or choose Eject (or Put Away) from the File menu.
    Press the target computer's power button to turn it off.
    Unplug the FireWire cable.
    (my emphasis).
    Excerpt from:   http://support.apple.com/kb/ht1661
    The terms are Target and Host. The old iMac is the Target, the new one is the Host.

  • My 2011 IMac will not boot up past the White apple logo screen with the whirly circle

    My 2011 IMac will not boot up past the White apple logo screen with the whirly circle. I have tried various commands but to no avail. does anybody have any advice?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.   
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Imac will not boot up, chimes with apple logo and beach ball spin??

    imac will not boot up, chimes with apple logo and beach ball spin?? after installing adobe flash and up graded apple softeware

    If your iMac came with or is running Lion, startup holding either  the Command-R keys or the Option key and select the recovery partition and then use Disk Utility to repair the Macintosh HD.
    see > OS X Lion: About Lion Recovery
    If your running Snow Leopard or earlier OS X, pop in your Install DVD and startup holding either the Option or C key, then open and use Disk Utility to repair the Macintosh HD.
    see > Mac OS X - Using Disk Utility to Repair a Disk

  • IMac will not get past chime & white screen

    iMac will not get past chime & white screen. I have tried all the start up key combinations I can think of (d or c etc) with a start up disc, but no joy. The disc drives seems ok - you can hear it working & it will eject OK.
    Any other start up ideas, please?

    Have you tried a safe boot? If not, hears how (it's straight from Mac Help):
    To start up into Safe Mode (to "Safe Boot"), do this:
    Be sure the computer is shut down.
    Press the power button.
    Immediately after you hear the startup tone, press and hold the Shift key.
    Tip: The Shift key should be held as soon as possible after the startup tone but not before.
    Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
    During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
    During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
    To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.
    To learn more about Safe Boot check this page:
    http://docs.info.apple.com/article.html?artnum=107392
    Intel iMac (Early 2006)   Mac OS X (10.4.8)   2.0 Ghz, 1 MB

  • My imac will not start - it is hunged up, when I turn it on I see the apple and the little wheel go around and around and nothing happens - what can I do ???

    Hello - can anybody help me - my Imac will not start - When I try to start it I just get to see the apple and the wheel that goes around and around  HELP !!

    Restart in Safe Mode, this will clear some caches. How you do this is when you hear the startup tone hold down the Shift Key until you see the progress bar appear. Let it fully boot, then open System Preferences - Startup Disk and ensure your internal HD is selected and then click Restart to test. If you still don't have luck you should run Apple Hardware Test in Extended Mode, you may need to run the test 2-3 times to report any errors. To run AHT you will need teh ORIGINAL Install Discs that shipped with the computer. Instructions for AHT are in:
    http://support.apple.com/kb/HT1509
    Have you been backiing up?

  • IMac will not start up - blue screen after months of Leopard use

    I have an iMac G5 that will not start up. It hangs at the blue screen, but does not have the issue with the ApplicationEnhancer.bundle file. It will start up in safe mode.
    This iMac will not start from a bootable external drive (the external drive can be used as a start up disk successfully with my iBook G4). The iMac's internal drive can be used as a start up disk for the iBook (via the target mode) and does not appear to have any problems. Does this seem like it is a hardware issue with the iMac? The iMac also hangs at the blue screen if I attempt to start up with the Leopard install disk after using the startup disk preference pane in safe start mode.
    I have repaired permissions, verified the disk, etc., using the disk utility. I have cleared caches, preferences, and so on, using Mac HelpMate.

    It may be that some of your login items might be incompatible with the mac. Also, try booting up from the install disk and repair your disk.

  • Please help my iMac will not start. The apple logo comes up and the wheel goes round and then I am left with an empty white sceen can anyone help

    Please help, my iMac will not start up, the apple comes up and the wheel goes round but then I am left with a blank white screen. Has anyone any ideas.

    Locate your original install disk (it's grey) and use it to restart your iMac by holding the "C" key during startup. Use the disk utility to repair your harddrive.

  • My imac will not turn over, what should I do

    my imac will not turn over, what should I do

    Just FYI,
    You are not addressing Apple here.
    People here who help troubleshoot and attempt to correctly answer technical questions in these Apple Support Communities are Apple users just like yourself.
    There are two initial things you can try.
    An NVRAM reset.
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone information. The logic board battery helps retain NVRAM/PRAM settings when your computer is shut down.
    IF this fails to help reboot your iMac, you could try an SMC reset.
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Check back if neither one of these solves your iMac's issues.

  • Please can somebody help, my imac will not start up, just chimes, apple sign then spinning cog. I have tried many key codes, no success, would really like to talk to someone.

    please can somebody help, my imac will not start up, just chimes, apple sign then spinning cog. I have tried many key codes, no success, would really like to talk to someone.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing ' ' 1274181950 464843899 1233118628 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • My iMac will not turn on, the screen stays black, makes a whistling sound 3 short, 3 long, 3 short, well maintained while keeping on, what solution do you have?

    My iMac will not turn on, the screen stays black, makes a whistling sound 3 short, 3 long, 3 short, well maintained while keeping on, what solution do you have?

    For some reason its firmware seems to have been corrupted. Read:
    About the Firmware Restoration CD (Intel-based Macs)
    iMac (Mid 2007) and later models: About startup tones

Maybe you are looking for