IMac9 and a MacAir - who should be boss?

I am a newbie to Apple products, just under a year. But I have a MacAir I love and now have acquired an iMac9. I travel alot and need to be sure that I get files synched between the two. I am using MobileMe to synch email though the rules that transferred from the MacAir don't seem to be working. I travel a lot and have to use the MacAir often, but at home I am liking this iM9.
Is there an intelligent strategy I should put in place to stay organized between using the two of them at the same time on any given day?
I also think I am in the wrong topic but can't figure out how to move my question or where to move it. LOL is encouraged.
Message was edited by: RKM12

Hi,
Sorry I don't use MobileMe so I'm not going to be much help answering your question. However I was able to find the MobileMe forums. Here the link, simply repost your question there and I'm sure someone can help you. Also if either of your products is less than 90 days old or is covered by AppleCare you can call AppleCare and get some help. You should find that number in you either of the owner's manuals.
http://discussions.apple.com/category.jspa?categoryID=116
Best of luck,
Roger

Similar Messages

  • Report - current workflow step as well as the user who should approve

    Hi ,
    I  am preparing a report. Based on the      Vendor Request number   i need to find the current workflow status and the person who should approve it .  Also let me know whether the FM SAP_WAPI_WORKITEMS_TO_OBJECT  can be useful to do that.
    How can i use  FM SAP_WAPI_WORKITEM_RECIPIENTS.
    Regards,
    Richard A

    the FM SAP_WAPI_WORKITEMS_TO_OBJECT is useful when you want to determine workitems with respect to particular instance of the Business object.. For example
    let say If at all i would like to detemrine all the workitems relate to mateiral.. then I would be using the exporting Parameter OBJTYPE of the Fm to which i wouldbe passing the BOR name as BUS1001006, which will give me all the workitems related to the BOR BUS1001006....
    If at all i would like to get the workitem number with respect to a specific material ( let say MONITOR) then i would be passing the MONITOR to the parameter OBJECT_KEY  along with Parameter OBJTYPE as BUS1001006 of the FM, so that the Fm will retrun the workitem specific to the instacne of the MONITOR only...
    Can you please let us know how would you create a Vendor request...or atleast let us know in which table the vendor number is saved....

  • I have purchsed gem in clash of clan through my credit card but i didnt recieve the gems..it has also reflected in my bank account and my itunes purchase history...how can i get them back??who should i complain to??? plz help....

    i have purchsed gem in clash of clan through my credit card but i didnt recieve the gems..it has also reflected in my bank account and my itunes purchase history...how can i get them back??who should i complain to??? plz help....

    You need to talk to clash of clans first. The game should have a support link.
    If they can't/won't help you then you turn to iTunes support.
    There seem to be a lot of issues with in app purchases in this game because not a day goes by that someone doesn't post a thread asking something similar.

  • I am able to see my ipod touch 5th geneneratio in find my iphone on icloud but it is showing offline.... i think its stolen but i have locked it with a passcode and the person who i suspect doesnt know it... i wana get it back what should i do??

    i am able to see my ipod touch 5th geneneration in find my iphone on icloud but it is showing offline.... i think its stolen but i have locked it with a passcode and the person who i suspect doesnt know it... i wana get it back what should i do??

    lost/stolen                                     
    No app on the iPod is required.                           
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    iCloud: Erase your device
    iCloud: Use Lost Mode
    - If not shown/shown off, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                               
    Reporting a lost or stolen Apple product                                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • How to get accurate photo printouts using calibrated FlexScan S1932 , Photoshop CS3 and Canon MX925 ? ALL ARE calibrated with i1Pro . WHO SHOULD GOVERN THE PRINTOUT , THE CS3 OR THE PRINTER ?

    How to get accurate photo printouts using  FlexScan S1932 screen, Photoshop CS3 and Canon MX925 ? ALL ARE calibrated with i1Pro . WHO SHOULD GOVERN THE PRINTOUT , THE CS3 OR THE PRINTER ?

    You need to work with the calibration parameters to get a good match from screen to print. There are no fixed values - basically whatever settings produce a match are the right ones.
    First, set the white point - luminance and color - so that screen white is a visual equivalent to paper white. You can be very specific about this, with a viewing booth right next to the display and a particular paper as target. Or you can take a more generalistic approach. That too will usually work well, as long as you keep the aim in sight: screen white = paper white.
    Don't trust the white point presets. You will usually have to adjust to compensate for your working environment. Make sure you can adjust both along the blue/yellow Kelvin scale and the green/magenta axis. Any given Kelvin value may well be wrong on the green/magenta axis.
    Next set a realistic black point. This is important. Monitor manufacturers throw about completely unrealistic contrast ranges that you will never see on paper. A good glossy inkjet paper will be in the vicinity of 250-300:1, or a black point around 0.4 - 0.5 cd/m² if your white point is at 120. If you have a monitor that goes down to, say, 0.2, which most monitors today will, you're in for an unpleasant surprise.
    Leave gamma at 2.2. Gamma is remapped from profile to profile and is "invisible" - the net result is always linear. You just want to stay close to native so that the monitor behaves at its best.
    If you have a wide gamut monitor soft proofing in Photoshop can be useful. With a standard gamut monitor it's mostly a waste of time since monitor gamut is the limiting one.
    Oh, and let Photoshop manage color. Make sure you have the right paper/ink profile and also make sure you have the right paper selected in the printer driver. This controls the total amount of ink.

  • I purchased the sticker from the application LINE and they already deducted the money from my account but I didn't get anything. Who should I contact?

    I purchased the sticker from the application LINE and they already deducted the money from my appstore account but I didn't get anything. Who should I contact?

    All you can do is contact ...
    Apple - Support - iTunes Store - Contact Us

  • Who should do  rgb-CMYK conversion - designers or printers?

    I have been having a very interesting discussion on a previous thread in response to problems with the colour conversion from rgb to CMYK using InDesign and the resulting unsatisfactory colours in the final magazine delivered by my printers.
    This has raised a number of issues and led me to further research. I would like to air these for a wider debate hence this post.
    Perceptive readers will note from my spelling of colour, that I am English and indeed I work out of the UK. I am a historian, writer, photographer and editor. These days it is as a full time freelance but for a long time I was part time when I helped my partner publish a specialist sports magazine.
    We started it a long time ago, in the days when you sent a typesetter galleys of type and photos and agreed on a layout. Our typesetters migrated to Pagemaker and we went with them. They and we were PC based and we still are, which is a bit of an anomaly in the design world.
    Creating the text in Word was easy enough but the images remained a problem before digital cameras. We had a scanner but it was a flat bed scanner and created rgb images. The printers needed they said CMYK images then only available using cylindrical professional quality scanners. So there was a period when we paid the printers to scan the images for us, from the original photos, paying per print.
    One of our small amateur publishing team was a well known professional photographer, so we started out with some high quality images but even so the scanned results, as they appeared in print, were patchy. I particularly remember one feature, covering a major international event where we had been supplied with high quality transparencies by a top class sports photographer and we duly passed on to the printers to scan. The results were clearly out of focus and the photographer was enraged and said he would not work for us again.
    Of course we got proofs but they were low resolution in general and when we queried the quality of any image, we were invariably told that the proof did not reflect the final quality image as it would be printed. Trouble was it often did.
    We ourselves continued to strip out costs from the magazine and eventually one of our team went on a series of Pagemaker courses and got some hands on experience working next to our former typesetter who was coming up for retirement. We took over the design and found a sympathetic new printer, down the road, also familiar with Pagemaker where we could pop over to look at the proofs, and get a second scan if the first was not OK. All went happily along for quite a few years. The sports magazine got sold and then I got a contract to edit a magazine dealing with the historic environment. By now digital photography had come along but we simply supplied hard copy prints (we use a lot of historical images) or digital images to the printers, with the Pagemaker files and they did the conversion. This routine stayed in place for a few more years and then the owner of the printers sold up and retired.
    We found a new printers', a short run magazine specialist who agreed to accept our Pagemaker files (by now 6.5) although they were primarily Quark and Apple based. They did have a handful of PC clients and kept one PC for proofing their work. We continued to send the new printers Pagemaker files for printing and included the source images in case they needed to be redone. It quickly became apparent that the new printers worked down to a price rather than up to a quality and a fast turn around was the main aim. Conversations with their chief designer were perfunctory but because we had a lot of Pagemaker expertise we did not need a lot of support. We were under pressure to move to InDesign and it was probably time anyway.
    Around two years ago matters can to a head with a font problem. This turned out to be a known issue with Pagemaker but resolving it caused problems with the printers, who said we had to upgrade to InDesign and it would go away. We were also assured that if we did so, and supplied them with a .pdf from InDesign, we could get a guaranteed result. We were told not to send them any more source images for comparison but to provide CMYK images. How we converted them was up to us.
    Our designer went on several InDesign courses but they dealt with the design process and differences from Pagemaker.  Getting to a .pdf was the target, not balancing colour thereafter. That was considered the role of the printer and his workflow press press processes.
    When we needed to export our first .pdf from InDesign, the chief designer called up our designer and talked him through it. The importance of compatible profiles and presets was never raised. We have never been given any written information by the printers on .pdf presets or profiles we might need to set up at our end. As explained in my earlier thread, we are now required to submit all our images already converted to CMYK and this has caused and continues to cause, problems with the colour balance, in general the final result has too much magenta in it. Matters came to a head with the latest issue.
    We are in talks with the printers to resolve this but it seems the chief designer has now left and not been replaced. We have asked if they can do the colour conversion to CMYK for us and the answer has been a definitive "No". Approaches to other printers has met witha standard salesman's response that all we need to provide is a .pdf from InDesign and they will do the rest. All require CMYK images.
    It seems to me in all this saga, that the printing community has been busy de-skilling and downsizing and putting responsibilities back onto the end user wwho may not be experienced enough in the area of prepress and colour, to understand the issues involved.
    So the question then arises, why can't the printers do the rgb to CMYK conversion anymore? Our printers maintain they are not able to accept any work which requires them to do this. But reading around the subject it seems there are printers who are moving to handling the rgb conversions for their customers "late  binding rgb workflow" I think it is called. This is a link to a very interesting article about it in Print Media Management (I assume I can put links here). http://www.printmediamag.co.uk/technical-articles/205.aspx
    What does anyone else think about this as a concept?

    Just after the turn of the century I was working for a large-format output service. ID had just been released, but nobody used it, and Quark 4 was state of the art. Color management was a "new" concept to everyone I knew.
    One of our vendors sold us paper with the promise that they could provide profiles for every stock to match our HP plotter (not that I think we would have necessarily, at that point, understood how to use them). They never managed to do that, and we never managed to match color from the same file on glossy and matte papers. Nor were we able to reliably match color that we saw on screen or in a customer's inkjet or laser proof without making test strips and using five or six times the paper in trial and error adjustments as it took to make a single poster the customer ordered. It was ridiculous, and expensive, and it convinced me that I needed to learn at least the basics of color management. Shortly after I left that job and went freelance.
    I switched to InDesign partly because it actually handled color management better than Quark in those days (and may still -- I've never looked back and stopped buying upgrades at 6.5), and I read as much as I could (Real World Color Management from Peachpit Press is an EXCELLENT and easy to understand primer). I also found a local printer for offset where the prepress manager understands CM and profiling, and was willing to talk (we're now good friends), and I also found another large format service where the staff was CM literate. I use a colorimeter to calibrate and profile my monitor, I use the output profiles they recommend and the export settings they ask for, and what I see in print from these vendors "matches my screen as close as dammit," to use the OP's words.
    The owner of the offset printery said something I found flattering, but a little shocking, the last time I went for a press check -- I supply the best color in files that need the least amount of adjustment on press of anyone they print for. My attitude is if the print is off at make-ready, it means my numbers are off, and that was my fault. I usually complain the reds aren't bright enough, then let the pressman convince me that if I tweak the reds too much I'll lose the blues and to have confidence that things will fall into place when the ink dries because his measure ink density numbers are where they should be. He's always right, by the way.
    Is this shop unusual? Maybe a little for my neck of the woods, but there are plenty of them out there with the same dedication to keeping up with technology at the pre-press end, and the knowledge and experience with putting ink on paper and a commitment to quality and service, so you should be able to find someone almost anywhere. And size is not necessarily an indicator -- this printer is a mom-and-pop shop with two presses, a folder, and a half-dozen employees. Dad has been in the print business for about 40 years and knows only what's rubbed off about color management, but he knows about presses and ink and paper and what will work. The oldest son is the prepress tech, and he's a complete geek, and either one of them will talk to anyone, and wish more of their clients would take the time to ask questions about the printing process and file preparation, and how they can improve the quality of both what comes in and what goes back out.

  • I want to get certified to work on macs and buy and sell and repair them.what should i do

    i want to get certified to buy sell and repair macs what kind of certifiacation should i get anybody help    

    That is the stuff that USED to be hung off the developer site. It includes this program:
    http://training.apple.com/certification/acmt
    Apple Certified Macintosh Technician Certification
    Apple Certified Macintosh Technician (ACMT) certification verifies the ability to perform basic troubleshooting and repair of both desktop and portable Macintosh systems, such as iMac and MacBook Pro. ACMT certification exams emphasize identifying and resolving common Mac OS X problems, and using Apple Service and Support products and practices to effectively repair Apple hardware.
    Who Should Seek ACMT Certification?
    ACMT certification is intended for technicians employed by an Apple Authorized Service Provider (AASP) or Self Servicing Account (SSA), or for persons motivated to demonstrate their knowledge of technician-level service and support skills. For persons not employed by an AASP or SSA, attaining ACMT certification verifies skills and knowledge that may be sought by a prospective employer, such as an Apple Reseller or a self-servicing entity like a school system.
    Please note that ACMT certification by itself does not authorize a technician to perform repairs on Apple products. Information on becoming authorized for servicing Apple products can be found at:apple.com/support/programs/

  • There are lot of things about firefox 4 needs to be on. Who should we complain about firefox 4?

    There are lot of things about firefox 4 needs to be on. Who should we complain about firefox 4?

    Please give us a list of your problems or issues with Firefox 4.0 and we'll try to help you with each one. Please use a numbered list so a person can respond to a specific item by its' number in your list, as not everyone may feel or be qualified to answer all your questions.
    Complaining to Mozilla isn't going to fix anything for you. One complaint, a few hundred complaints, or even a few thousand complaints about the same issue is going to bring about a "fix", unless it's a security issue and Mozilla recognizes ot as such.

  • Who should I trust to rebuild my iphoto library

    I live in Honolulu.  I have time machine backup and somehow lost my library and my import doesnt have all the faces, event and many many duplicates.  I want a professional to fix it.  who should I trust?

    You don't need a professional. You can do it yourself.   Assuming you are running iPhoto 9 or later Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database followed by Option #1 if needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download the demo version of iPhoto Library Manager and launch .
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • I lost my ipod but i know my serial number to who should I reporte it ?

    I lost my ipod and I don't know what to do ... I know my serial number. To who should I report it to be able to find it back ? Plz help!!!

    Hey fashion fix97, Sorry to hear you lost your iPod. Knowing the serial number is of little use. Apple will do nothing to help find your iPod. Report the iPod lost / stolen to the police. Try looking at lost and founds if lost in a public area. You'll have to go physically look for iPod like it was a lost wallet. To protect your personal information and limit a thief's access, change all account info and passwords associated with this iPod. Good luck. Cheers.

  • Who should use SM30?

    Hello,
    Who should be using SM30 to maintain table data? Is this something appropriate for a user to have access to?
    I have a table that I need a user to be able to update. I do not want to have to code an interface or program. I'm looking for a quick solution.
    Is it normal to give a user access to SM30? Can that access be limited to a specific table?
    Thank you in advanced.
    Brett

    It depends on tables .
    some tables every one can use it , but some table they will restrict with authorizations.
    if you don't want to restrict  that user then you need to assign authorization key and assign that in table maintenance generator, and assign it in authorization option. then he can able to update, but others can't.
    vijay

  • Who should open a new account? What will happen to older purchases?

    My wife has been using my Apple account for a few years. I also have an iCloud account and used iTunes Match. Now I have my own iPad, and need to "cut off" my family from access to my Apple email, iCloud documents, etc. Who should start a new account - me or my wife? What will happen to our purchases, and what devices will be able to play them?

    Hi claybrowne,
    iTunes purchases are linked to the Apple ID they are purchased under, so you should keep your account.
    There is the option for your wife and family to continue to use your Apple ID for purchases only but have their own Apple IDs for iCloud, but I'm not sure how to stop them from using your Apple ID for other things other than telling them "this is for purchases only, use your own account for everything else."
    See "Apple IDs and iCloud", the section "Using one Apple ID for iCloud and a different Apple ID for Store Purchases".   They can have their own email and Apple ID for FaceTime, Messages, iCloud, etc.
    ivan

  • Who should be an SAP Mentor? Please nominate! - Deadline 26th. Feb

    Hi all,
    The SCN Team is looking for new Mentors.
    SAP Mentors are the top community influencers of the SAP Ecosystem. Most mentors work for customers or partners of SAP. All of them are hands-on experts of an SAP product or service, as well as excellent champions for product roll-in and roll-out. They have been nominated by their peers on the basis of their passion for the community and their willingness to contribute and share as well as motivate others.
    Please take a look at the Blog here: /people/mark.finnern/blog/2010/02/15/who-should-be-an-sap-mentor-please-nominate
    Or directly
    vote here: http://bit.ly/sapmentornomination
    Deadline for the nomination is Friday the 26th of February
    P.S: Top 3 Contributors, of the last 30 days: 1. Gordon Du (1,730); 2. János Nagy (358); 3. Thanga Raj.K (344)

    But I don´t like the concept of wikis. I don´t understand who, why, when will change my content. And I don´t want anybody to do that. But these are only my personal feelings and I can work on this.
    I am also sceptical about them. I created some wikis, but no one else contributes further to them. It is however the rather "niche" type of wiki.
    If you let the people to create these "personal learning paths", people will try.
    There was a guy in the MM forums who documented every transaction in SAP by asking for link-farms to anything relating to the tcode. We stopped him too late.
    If there were a new mechanism how to do things it would attract people. I can imagine for example Chintan Virani to run his own "Portal school your youngsters" etc.
    Probably I would enrole as a fresher. I like Chintan, and in my free time look up to see his recent posts.
    My offer stands if you want to do anything security related. If you initiate it, I will join for sure. There are also existing initiatives which you can join - see the functionality wishlist.
    One last thing: American presidents ask who should they call to talk with Europe. There is no such number. And there is no such place here on SDN.
    Regarding your reference to the "grouping" notion (BEGRU heh??) - I am currently trying to learn Hindi. Actually, Bollycat Urdu. SDN is for me a natural platform to find such people and I have many friends from India met via SDN. I also need a mentor for this but it is tough to achieve without disturbing others in the public realm.
    If anyone would like to help me, then we can use the non-English playground forum. The background is to attend TechEd Bangalore 2010 and be able to understand (more or less) what is going on around me.
    Cheers,
    Julius

  • Has anyone come up with criteria on who should have an iPad at work?

    Has anyone come up with criteria on who should have an iPad at work?

    I'm in health care as well...the executives will probably be the first to get them since they are the ones that sign the invoices.....but seriously the iPad has  a number of uses in health care...patient education, display of real time clinical data through a vpn connection and in-house apps, desktop virtualization etc.  I really believe if you can get the devices in the hands of clinicians, they will think of innovative ways to use them for far more than email, contacts, calendars etc.... 

Maybe you are looking for