Image made on CS5 W7 64 computer won't print with CS5 XP computer – Epson 9880

I have 2 computers with CS5. One is new, with Windows 7 64. The other is XP. My printer is Epson 9880, which is connected to the XP computer. The computers are networked, but I only print from the XP computer. On my XP computer, I have opened a file created in the W7 64 computer, and am trying to print it. I am getting this message:
"The saved printer information is not compatible with this version of Photoshop, or the saved printer is no longer available. You will need to check your printer settings before printing." Then, when the print dialogue box appears, the Printer Profile box is greyed out.
Any suggestions on fixing this problem?
Thanks in advance,
Ellen

function(){return A.apply(null,[this].concat($A(arguments)))}
mellencm wrote:
Also, the XP computer is 32Bit. Could this be a problem?
No that I see. I run CS5 on both XP 32bit and Win7 64bit on the same hardware, I switch out hard drive to boot to each OS, and all my image files are on a different hard drive that is always in the system and I can print any image edited in either OS from either OS.
the only thing I can think of is the Win7 install of CS5 is saving the Printer info with the file and when you bring that file over to XP, you are copying that file over to the XP PC and not just accessing it across the network, it is still looking for whatever printer info was saved on the Win 7 PC.
Please open and RE-SAVE that file on the XP PC. Then try printing.

Similar Messages

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC??

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC?? Checked for software updates and are none. Talked with HP help and they say it's an Apple problem

I noticed that you said you uninstalled the printer, but you didn't mention resetting the print system. Resetting the print system will reset the drivers the Mac has installed and make them work like they should. Give this a try and see if it gets the printer working like it should. The document below will expalin more about doing this.
Basic Printer Troubleshooting Steps for Mac
If that doesn't help, see if you are using the AirPrint driver, or the printers driver. By default 10.8 uses the AirPrint driver if the printer supports it, so I'm betting that's the driver you're using. If it is, try using the driver for the printer itself. To do this, access Print and Scan. Click the + sign to add a new printer. Select the printer from the list. Click the dropdown next to Use and select the 7515's driver. Let me know what happens.
I am a printer tech for HP.

Macbook pro recognizes but won't print with hp desk jet 5550. Help!

macbook pro recognizes but won't print with hp desk jet 5550. Help!

Hi, I used the Mac setup instructions, not the PC ones. The printer was automatically recognised in print and scan when I connected it with a USB cable. I accessed the server's web-based page and followed all the instructions, but still no joy. Thanks for the tip about posting. I have just posted in the section you suggested, so let's see what happens. From a quick scan around the apple forums, lost of other people seem to having precisely the same problem (and not just with HP printers!), but unfortunately, no-one seems to be offering a solution! And trying to get through to the apple online support is a complete waste of time. They've been 'not available' for two days now. Christmas/New Year shutdown, I suppose. Thanks for all your help, though!

After I retouch a pic, it won't print with the retouches. It prints the original. What am I doing wrong?

After I retouch a pic, it won't print with the retouches. It still prints the original pic. What am I doing wrong?

There are 9 different versions of iPhoto and they run on eight different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.

Firefox won't print with my new HP P1102W printer. The printer will print if I use IE8. Please advise settings tomake firefox print with my new printer

firefox 3.6.12 won't print with my new HP P1102W laser printer. The printer will print if I use IE8. Please advise settings tomake firefox print with my new printer . I spoke with HP tech support. We reinstalled all drivers. They adamantly say it is a Firefox issue and you should have some modifications for it.
When I try to print from the internet using Firefox, a dialog box pops up which says "preparing to print." However, it hangs and I have to manually shut it down. Doing this terminates the Firefox session, and it will not restore upon restart. This printer will print files on my hard drive, and if I use IE8, which I do not want.
Thanks

It must be a Firefox problem, since it works perfectly in Chrome.

Print Apps won't print with C510a eStation. Prints thin line at top of page.

My C510a eStation printer will not print using the Print Apps. It just prints a thin line at top of page. Everything works fine until I print.
All other print functions work. It prints from computer via WiFi. It prints when I send an email to it. It copies via the Zeen. It just won't print using the Print Apps.
Does anyone else have this problem? What is the solution?
12/23/2010 3:00PM. I just got off the phone with an HP engineer. She said that the eStation is still in the TESTING phase and to call to report problems so they can improve the product. (I would have thought the product would have been fully tested before being released to the public!)
She had me reset the Zeen display by holding down the volume keys while powering up. This erased everything that had been done on the Zeen by me and resulted in no HOME screens, which will have to be set up by me. The only app at the bottom of the blank home page was Yahoo!. Even the printer app was missing. I had to move it from the app tray to the home page. Now, I have to spend hours, again, setting up the Zeen.
After the reset, the printer apps seem to work now. The Zeen will copy using the printer app. My computer still seems able to print and scan to/from the eStation.
The eStation C510a eStation printer and Zeen display are very exciting. However, they are not for someone not willing to spend the time to get it to work properly. If you have a cell phone, be prepared to use up a lot of minutes while on support.
The HP engineer said that it will soon have a new release of Android operating on the Zeen which will allow it to be faster.
This question was solved.
View Solution.

I have decided to return this printer to the store as it just has too many problems. HP has essentially told me they will not issue updates to solve the problems. I hate this, as I really loved the product.

Hp laser jet 1022 won't print with my new hp envy 8.1 operating system

My new hp envy 8.1 operating system won't print from my hp laser jet 1022 printer. I have downloaded the driver and it seems like it's not acknowledging the USB cord.

When you say " my new hp envy 8.1 operating system " ..... Does that mean possibly that you had windows 8 ,,, and have upgraded to windows 8.1 ? Or does that just mean you have a new computer and it Came with 8.1 ???
What is the Model of your computer?
The reason i asked.. because I searched for your HP Laser Jet 1022 Drivers, and when i found them, i selected "more details" and it states " This full software solution is the same solution as the in-box CD that came with your printer. This is not a software upgrade. If a prior version software is currently installed, it must be uninstalled before installing this version. "
Sooooo.. if you had windows 8, and then upgraded to windows 8.1, then you probably need to 'uninstall' any reference to the original installed software for the laser jet 1022.....
And you could also try to NOT get the Full software / driver option, and get the 'Basic drivers' ( you will notice a link for that under the download of the 'Full' software link....

A616 Photosmart Printer won't print with Windows 7

W7 is supposed to have all the drivers for HP printers, however my A616 won't print from my computer running W7. It will from my old desktop at work, but that's not what I need. Anyone with the solution?

Hi
The A616 driver should be in W7 as you say
Here are instructions for installing the printer on W7
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01874725&lc=en&dlc=en&cc=us&os=4062&product=183...
and what to do if the installation failed
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02663702&lc=en&dlc=en&cc=us&product=1839067
Say Thanks by clicking the Kudos Star. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
(Although I am an HP employee, I am speaking for myself and not for HP) I am not a expert on all our products, but I'll do my best to help you.

Epson C88 Won't Print with Snow Leopard

C88 won't print using Snow Leopard. Downloaded driver from Epson doesn't help.????

Like you, I'm working with an Epson C-88+. Happy with this situation, would not be exactly accurate. I have tried some different approaches, including the ones from John and Kappy. They would work just fine for about 3 days, then fail. I even went back to the Snow Leopard Install DVD/ Optional Installs/ Options.MPKG/ Printer Support and made a choice. I then went to Disk First Aid and everything was fine. Today, I went to print 1 envelope, total dismal failure. I then downloaded the EPSON Printer Drivers 2.1, I proceeded to install the drivers. Did anybody notice, this was an Apple License, not an EPSON License? Therefore, there are no assurances, that these print drivers are in fact, EPSON. Therefore, AppleCare should be required to support these Print Drivers as Apple Licensed Products. But equally so, we as 'dumb endusers' must try to work with AppleCare to solve this issue. To "pete.purvis" John and Kappy, sorry, you guys have proven yourselves to be out of the "dumb endusers group, I just want to say, THANK YOU!

Smart print 2.5 won't print with ie 11

I have an office jet pro 8600 all in one printer.
smart print 2.1 and ie 10 worked fine.
when up grade to windows 8.1 installed so did ie 11.
smart print 2.1 went to 2.5. Smart print no longer functions.
is there a fix for this.

Hi 9952,
I understand you have an Officejet Pro 8600 and are attempting to use HP Smart Print with it and Internet Explorer 11. I will certainly do my best to advise why this issue has been happening.
In this Internet Explorer 9 and Later Versions are Not Compatible with HP Smart Web Printing document it explains that HP Smart Print is only compatible with Internet Explorer 10 and below. You can certainly look into downloading an older version of Internet Explorer so that you can use this feature, but at this time you won't be able to use HP Smart Print with IE 11.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Canon MF8050cn won't print with Lion ?

Hi anyone,
I'm pulling my hair trying to get this new printer working with my Mother's new iMac and have failed for the past 6-weeks!
I have followed all sorts of suggestions found here and elsewhere - and none of which have worked!
The printer is connected directly to the USB port and I'm simply trying to add it using the Canon UFR II LT v2.3 driver but it never communicates with printer.
Seems like there is a fundamental incompatibilty between this printer and Lion?
any suggestions, I haven't resorted to a firmware update yet, but maybe I should be looking at this too?
This has been a horrible time wasting experience for both her and me.

One of the problems I have encountered with the UFR2 driver is that it relies heavily on a background service and if this fails to run it will cause printer issues. So the first thing to check is that this "UFR II Backgrounder" service is running on the iMac. Open Activity Monitor and scroll down the list. Do you see this service?
Also, I cannot tell from your post if you have managed to add the printer and that the issue is that it won't print, or you have not been able to add the printer. If you have been able to add the printer but cannot print, then open System Information and select the Printers entry listed under Hardware. In the top right pane will be the installed printers and if you select the MF8050, the bottom right pane will show information about the print queue. Can you copy this information and post it back here please.
Message was edited by: PAHU
Changed the model number from 8030 to 8050.

Printer won't print with upgrad, can't change IP address of printer

I have read lots of posts and did the guided solution several times and even tried reinstalling my printer and none of it helped.
I bought the printer (HP PhotoSmart Plus B209-a) and had Vista 64 bit on my computer. In January I upgraded to Windows 7 and I was no longer able to print. After reinstalling several times, I was able to get it to work for all of 3 weeks. Now, it won't work again. I tried to reinstall but now my computer won't even show the printer on my printer/device screen. I have downloaded the Windows 7 patch and used the software download that is provided by the HP website.
When I try to configure wirelessly I get the following error :
Print communication problems detected. You may experience limited functionality when printing to your printer from your PC.
If you are using firewall software, verify TCP port 9100 is unblocked from your PC to your printer at 169.254.209.39.
Problems encountered while configuring your printer. You may experience limited functionality such as faxing (if applicable) and accessing the network toolbox.
If you are using firewall software, verify TCP port 9220 is unblocked from your PC to your printer at 169.254.209.39.
Status communication problems detected. Your PC may not be able to retrieve the printer status and ink levels properly.
If you are using firewall software, verify UDP port 161 is unblocked from your PC to your printer at 169.254.209.39.
To fix the issue(s) try to power your printer off and on.
I have tried to change the firewall to allow, but that doesn't work. I have tried to turn it on and off, but that didn't work. For some reason I can't get to the IP address on the internet (it keeps saying busy, try again later) to change my printer setting and there seems to be no other way to do it. The internet the I use is Comcast, but will be switching to Qwest.
I don't know what else to do, please help.

Try this patch.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet Pro 251dw won't print with applications inside Parallels 9

I've used HP printers with my Mac computers for years and had no problems, even when I was working with Windows XP and Windows-based applications inside Parallels Desktop on the Mac. All I would have to do to have the Windows-based software capture the printer (connected with a USB cord) was to click on a drop-down menu item under "USB." Recently I upgraded our OS to Mavericks and had to upgrade Parallels from Version 6 to Version 9. A week ago we had to replace our old HP Deskjet 6500 printer, and we chose the Officejet Pro 251dw. We connected the new printer wirelessly to our home network, and we were able to print from both our desktop iMac and our MacBook Pro with no difficulties. But when I needed to print something from PrintMaster 12, a Windows-based desktop publishing program running on Windows XP inside Parallels Desktop 9, the job wouldn't print, and I got a message that the printer wasn't connected. After doing my own troubleshooting, I spent several hours on the phone with Parallels tech support, including having them connect to my computer over LogMeIn and change all sorts of settings, but the best I could get was that the printer queue report said that the job was printing, but the touch screen on the printer flashed rapidly back and forth from "printing" to the date and time, with a large red X next to the date-time read-out, and still no job printed. After having two or three first-level techs and then a second-level engineer working on the setup, the Parallels people finally gave up and said that the problem must be in the settings inside the printer and that we'd have to have someone who works with printers.adjust them. Has anyone out there had this sort of problem working with Parallels Desktop 9 and the Mavericks OS? It wasn't just the desktop publishing software; the same thing happened when the engineer went into the Windows XP printer settings and tried to print a test page.

Rocky8,
This is a little outside our area of printing, but I'll try and help you the best I can. My question for you is the printer showing up under the USB menu in Parallels. If it's not showing up then you need to determine why the USB connection isn't showing up in your Parallels USB menu. This could be a couple of issues, but the one that I think might be happening is the version of the USB port your using. Can you verify that you're not connecting the printer via a USB 3.0 port. Try plugging into one of your other USB ports to see if the printer will show up in the parallels USB menu.
BT
Working for HP and here to help!

HP Laserjet 4mp won't print with Snow Leopard

My great Laserjet 4mp prints just fine with OS 10.5.8 but not with Snow Leopard (10.6.2) on my new iMac. Have spent three plus hours with senior level Mac Techs to no avail. The printer screen shows the correct printer and driver and indicating valid connection, but when attempting to print I get the message "Unable to print, try again in 30 secs". Since 10.6 doesn't have Appletalk, am unable to use it; techs have tried to use the 4mp driver supplied with Snow Leopard and also downloaded it separately from the web site. We (they) have also tried using all methods (IP, Daemon, and HP Jet Direct using Ethernet and Serial to USB connections). Techs have talked with HP techs and have no other solutions. The security system is off. Any suggestions are welcome! Thanks!

I've read the threads and don't understand some, but I think we (the Apple support techs and I) have tried the ones I recognize. One new idea--in a reply to a similar post someone mentioned being sure to use additional data when using the IP address-- submask address or some such, I
haven't been told to do this--should I? (I can get it from the printer readout if told what to get.) Also, in another post someone suggested deleting the OS 10.5.8 driver that was transferred when all the data from my old iMac G5 was moved over, saying that it would interfere. If true, how do I do that?
What I really need is a stepwise instruction on which connection to use (Ethernet, Serial to USB, or parallel port are the only options); which protocol to use (IPP, Line Printer Daemon, or HP Jet Direct socket, whatever they are); what to put in the Address line (the IP address is the one used by Apple techs); what to put in the Queue line (techs said to leave it blank); what to put in Name and Location blocks, if anything; and what to put in the Print Using line (techs have unsuccessfully tried Autoselect, Generic, and the HP4mp driver selected both from the Select Printer Driver option and from the driver downloaded directly from the HP web site).
I'd be grateful for this help or even advice on where I can get it! (With this new computer I still have free telelphonic Apple tech support but they've given up.) Thanks!

Safari 6.0.5 pdf still won't print with cache emptied and relaunched on my MAC 10.8.5

Emptied cache and relaunched Safari. The pdf I click on that shows a document goes blank when I click on print. I did learn that other documents in Safari will print after all, but not this one. Enabled cookies to no avail. Firefox works. Must be something to do with the site I am on perhaps.

Back up all data.
If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Image made on CS5 W7 64 computer won't print with CS5 XP computer – Epson 9880

Similar Messages

Maybe you are looking for