Images overlap with text when after creating pdf: InDesign CS

Good morning,
I am using bot InDesign CS and CS2, and I am having a problem as the following:
After creating the pdf, images overlap with one another, or the text overlap behind the images so on.
First, I would like to mention the overlapped images had no problem at the previous version of the pdf. If I make a change on the page "06" for example and then recreate the pdf, a couple of images in the other pages move to the different place through the document.
So I tend to "replace" the changed pages into the previous version of the pdf instead of recreating the pdf for all pages.
Is this kind of bug or features of InDesign?
It would be very much appreciated if anyone answer me.
Warm regard, Andrew.

The PDF that was placed into ID loses all interactivity and form fields. There is no way to do what you want.
Bob

Similar Messages

  • How to replace numbers with text in tax return pdf using Adobe Acrobat X Pro

    How do I replace numbers with text in tax return pdf using Adobe Acrobat X Pro? The tax return was created using CCH software. Thanks for your review.

    Thanks Bill for your quick reply. CCH software is one of the major
    suppliers of tax return software. I found an internal source that helped me
    make the changes from numbers to text i.e. "$123,456" to "See Schedule O".
    I am not sure if I am working in form or final text. Thanks again! Kelly

  • Adobe Standard 9.1.0 crashes when attempting create .pdf from scanner

    Adobe Standard 9.1.0 crashes when attempting "create .pdf from scanner" from a Kyocera Mita KM-2550 using the twain driver. The error encountered is 0xc0000005 at address 0x0000000002d78e70. I have downloaded and installed the latest updates. This is happening on two new PCs with the same configuration. Is anyone else having this problem? Any suggestions?

    Spent quite a while on this one..  My problem was related to twain drivers which reside in c:\windows\twain_32.  I'm running windows 7 64-bit.  First it's usually possible to scan in windows 7 maybe vista and from adobe without even using twain (using WIA).  So try renaming the twain_32 folder to _twain_32 and see what happens...  If that stops the crashing look at the contents of the twain folder.  I had a Dell folder for some printer I wasn't even using.  That was causing the crash. I removed the dell folder and renamed the twain folder back to twain_32.  Now everything works as designed.

  • Adobe Acrobat XI Standard crashes when we create pdf from scanner

    We are using adobe acrobat XI standard, version 11.0.06
    WIndows 7 Pro 64 bit
    scanner: Xerox documate 4799
    Acrobat crashes when we create pdf from scanner

    Spent quite a while on this one..  My problem was related to twain drivers which reside in c:\windows\twain_32.  I'm running windows 7 64-bit.  First it's usually possible to scan in windows 7 maybe vista and from adobe without even using twain (using WIA).  So try renaming the twain_32 folder to _twain_32 and see what happens...  If that stops the crashing look at the contents of the twain folder.  I had a Dell folder for some printer I wasn't even using.  That was causing the crash. I removed the dell folder and renamed the twain folder back to twain_32.  Now everything works as designed.

  • Hyperlink text not complete when using Create PDF button in Word

    Hello -
    I have Adobe Professional 9, and Microsoft office 2007. I'm trying to convert a word doc to a pdf using the Create PDF button but the resulting pdf always has incomplete hyperlinks. For instance, where it should say http://www.adobe.com, the output pdf will have : //www.adobe.com
    When I hover over the link, the pop up label has the entire URL, and the links work, but I want the entire text to show. I've tried doing a repair with the install disc for adobe, but that didn't help. I've already checked the settings to ensure the Add Hyperlinks option is checked. I just did a complete uninstall/reinstall of all my Microsoft Office products and installed the service pack. I don't have this problem when I use the Create PDF button on my desktop computer, only when I use my laptop (Dell M4300). Any other suggestions?

    I don't have my WORD 2007 on this machine. However, are you sure you are using the Adobe product and not the MS feature for creating the PDF? As for using PDF Maker, you should check the options/preferences in the Adobe menu. There should be a check box for conversion of links. Of course there is the question about whether the links are actually correct in WORD. The links only being partial is typical of the links not actually being transferred to the PDF, but simply Acrobat completing the link it thinks exists like WORD does.

  • Save as PDF or Save Book As (pdf format) Causes Frame 8 to try to quit after creating PDF

    I have Framemaker 8p273 and Acrobat distiller 8.1.3.
    When trying to creating PDFs from books using either Save as PDF OR Save Books As (PDF) file, the PDF creates FINE but the program then attempts to quit by throwing up weird dialog boxes.
    Steps to reproduce bug:
    1.Open any book
    2.Use File-->Save as PDF or File-->Save Books As and then choose type PDF
    3.PDF created fine - no errors reported in Distiller window
    4. Framemaker then throws up a small dialog box that says "cannot quit." You cannot close this box, only click OKAY.
    The only other issue that arises might be a "cannot print some graphics - will print as gray boxes"
    5. Clicking okay brings up sequence of 5 total of the same boxes (the book file has 7 files in it including the TOC).
    6. After last of 5 "cannot quit" boxes, a new Framemaker one appears, that says "Unsaved Changes in file (book name) Save before closing?" Options are Yes, No and Cancel. Yes saves file and quite Frame. No quits Frame. Cancel leaves file open.
    I have reproduced this error multiple times with different books, using both the Save as PDF and Save Book As (PDF) commands.
    File--Print Book using Acrobat printer works fine (making sure to enable the acrobat setting so bookmarks are properly generated).
    Just frustrated that the first two options cause such an annoying error. Reported as a bug.

    Jaclyn,
    I've seen this happen when an API client attempts to close a document that doesn't exist, which defaults to closing the FrameMaker session, but the session cannot close because it's in the middle of some operation. It's normally the result of sloppy code. Do you have any third-party API plugin software running? For that matter, does anyone know if the "Save as PDF" uses an API client? If so, might be a bug in that software, although it seems that there must be something unique going on here to invoke this behavior in your case.
    Russ

  • Images downsized and converted when exporting to PDF

    I have Pagemaker 7.0.1 installed on Virtual XP so that I can help out a family member.
    Pagemaker's embedded Acrobat 4 was not working properly so I installed my Acrobat 9.0 on Virtual XP. This unfortunately has not solved the problem, which is:
    My images are greyscale and 300 ppi when imported into Pagemaker. When exported to PDF using Acrobat 9.0, the images are being converted to CMYK and exported at about 50% of the actual size. Interestingly, those images that are only at 200 ppi are converted but not downsampled.
    This is happening no matter how I fiddle with the settings. Happens to both jpegs and tiffs.
    I found an old thread on another forum where this problem occurred but a solution was not found or posted.
    Any ideas?
    Michelle

    This reply is a series of comments and suggestions rather than a definitive answer.
    1. Your set up is less than perfect, if not unstable, and will be prone to all sorts of bizarre behaviours.
    2. Never copy/paste a graphic or table into PageMaker.  Always use the Place command. The only "exception" would be that you can copy and paste a properly Placed graphic from within your PageMaker document.
    When placing images in a PageMaker file, the following message appears: “The graphic in the linked file would occupy xxxxxxx bytes in the publication. Include the complete copy in the publication anyway?” The correct answer to this question is always "NO".
    (You can permanently avoid this popup in future docs by unchecking "store copy in publication" under Element -> Link Options with no publication open. You can do the same to avoid further prompts in pre-existing documents.)
    3. Try updating PM to Ver 7.0.1a which had a better Export… AdobePDF…macro. http://www.adobe.com/support/downloads/product.jsp?product=34&platform=Windows 
    4. In PageMaker’s Print dialogue, click on the Options button, and check "Write PostScript to File." Select the "Normal" radio button. Set both Type 1 and TrueType fonts to download. As always, set the Send TIF/Images option to Normal and NOT Optimized. Make other settings elsewhere in the print dialog as desired, such as "paper" size, crop marks, separations, etc.
    5. With your non-standard setup, try the two stage print then distill process. Create a PS file using a postscript printer file, then load Distiller and convert the PS file to PDF.  Note: if you have hyperlinks in your PMD file, they will not appear in your PDF and need to be re-created using Acrobat.
    6. It's time to leave PM and move on to InDesign - see it as PM Ver 13. 
    7. Aternatively, use PM7 on a contemporary Win2K PC.  http://bigjohnd.org.uk/PageMakerExportPDF/index.htm

  • Logo Overlaps with Data when viewed in HTML mode

    Hi,
    My report looks weird when I view the report in HTML mode i.e., my report logo overlaps with the report Row headers but when i view the same report in Java Applet mode report looks good and also when I export the report it looks good.
    I tried deleting the logo & adding a new logo & I even changed the settings of the logo & also I cleared cache of my browser, etc. I tired many options but nothing seems to work. Only couple of reports have this kind of issue & rest other reports looks good.
    Did anyone faced this kind of issue before? Is it a tool bug?
    FYI, I am using BO 4.0 SP5.
    FYI, I have created Logo by creating a blank cell in the Header of the report., then right click on blank cell and select “Format Cell”. In the formal Format Cell window click on Appearance and click on Radio Button “Image from URL” then type boimg://reportimage.jpg
    Thanks & Regards.
    Naveen.

    See if one of these program will kick it out of recovery mode:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Next, restore the the iPod and see if you can get any data off the restored iPod
    via How to perform iPad recovery for photos, videos
      Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official

  • General Error" when I create pdf of web site

    Using Acrobat XI
    I get a "General Error" error code when I am creating a pdf of a web site. It always happens after page 4 has been converted.  (the Web site has several hundred pages and I have plenty of memory).
    How do I avoid this?

    Hello Laura,
    The error ""Source type \CLASS=CL_CRM_BOL_ENTITY is not compatible, for the purposes of assignment, with target type \CLASS=CL_BSP_WD_VALUE_NODE" is casting error.
    When we create person / account it is value node untill mandatory fields are entered in account details screen. When "Grouping" value can be changed it is value node, when it is disabled it is model node. So if there is a variable declared CL_CRM_BOL_ENTITY and it want to get value node there can be type casting error.
    Please check in ST22 with more details, there can be custom coding.
    Thanks
    Krish

  • How do I insert multiple images inline with text in Pages 5.0?

    I have over 20 images in my iPhoto library that I want to insert in a document one after the other (inline with text).
    How do I do this without having to insert them one by one and going into the image options to change the formatting? It's a pain to have to do it this way...
    I tried using the media browser in Pages, but it seems you can only add them one by one. So I exported the pictures from iPhoto into a folder, selected them all in Finder and dragged them onto my document. All the images appeared stacked on top of each other in a random spot on my page. I can't select them all for some reason. So again, I have to click on them one by one to the formatting? Why is this not simpler? Am I missing something?

    If you use the Help in your Pages 5 you will find the followings link http://help.apple.com/pages/mac/5.0/?lang=en#/tanca246d3ac

  • Problem in PDF after creating from Indesign CS3 (transparancy)

    Hi all,
    Please give me a solution ASAP, its most urgent.
    We have used two color in one image, the color color is pantone.
    First we have selected the one pantone in image and in background another color. After creating PS using Prinergy and Distilling.
    I am not getting the result, the PDF which I have creating, the image contain only the main color not the background color, if I use the the "Advance - "Output Privew I am getting the result in PDF, what would be the problem, I have used "High Resolution" in Transparancy, still I am not getting the result.
    Please respond ASAP.
    Shaji

    Are you colours defined as spots.? If you do not need spot colours in your job, then change them to process in the swatches panel.
    Otherwise you will need to configure the RIP honour the overprints.

  • Why do I see incorrect fonts when I create PDFs from Word

    When I first started using Acrobat (versions 3 through 5), it was an incredible product because it could create an exact copy of a document I created with a DTP program. I could send that PDF to someone who did not have the DTP program, yet the recipient saw exactly what I created in the DTP program. That's what made Acrobat great. It worked flawlessly.
    Now I have Acrobat Pro XI, and I can't create a PDF from Word and get the correct fonts. I've seen quite a few messages on this forum and elsewhere indicating that other people have this problem, too. But I haven't found a solution. I've tried many things that are suggested--embed fonts, don't embed fonts, and different settings. Nothing seems to work. I've spent hours on this insted of doing the job I am paid for (writing). So I'd be very glad if anyone knows how to fix this.
    A few specifics:
    - Using Word 2010 and Acrobat XI Pro 11.0.3. Windows 64 bit.
    - Most fonts are OK, but some appear to be substitutes. For example, some headings that are supposed to be Tahoma bold-italic come out as something different. It's a lighter weight font. I don't know what it is.
    - Creation method from Word: Acrobat Tab, Create PDF or File > Save As PDF. Either way I get the wrong fonts.
    - Print to Adobe PDF printer DOES produce the correct fonts, but this doesn't help because you don't get bookmarks (which are a critical part of our final PDF product).
    - At one point it seemed that a Word setting, File > Options > Save > Preseve fidelty when sharing this document, but it didn't always work.
    - I've seen this same problem on four computers, all using Word 2010 and Acrobat Pro XI.
    Some messages suggest that rolling back to Acrobat 8 will solve this problem. It's hard to believe that's the only solution.

    I was starting to think this might be an issue with font fauxing (I think that's the tech term). You've confirmed it.
    Here's what can happen.
    Font designers design a font, and (if they have the enthusiasm) bold and italic and bold-italic versions of the font. If you compare carefully, you will see that they are often quite different designs (look at lower case "a" for example, you'll often see that different in italic). Anyway, in an ideal world the font designer has provided four font files. Choose the bold/italic buttons in Word and it (well, actually Windows) picks the right font file. 
    But Word never forbids you from choosing those buttons even if the font files aren't there. (As an aside, pro design tools like InDesign WILL stop you choosing a style for which there is no font file, because what happens next in Word is considered evil).
    If you ask Windows (or Mac OS) to show you a font in italic and there is no italic font file, it will take the regular file and slant each character. This may look different from the italic design font, it may also have different spacing. But to the casual word processor user, all is fine. (The pro designer says "oh my, look at that"). No bold? The font letters get thickened up somehow, often with ugly results, but the casual user is happy, because it's clearly the same font and clearly bolder. These processes are called "fauxing" (from making a faux or fake font).
    But what happens in a PDF? PDFs will not faux fonts, and they don't have to. If you make a PDF it's like printing. To print a faux italic font, a slanted font prints. Generally looks no worse than the screen font. To print a faux bold font there are several different techniques, all ugly. One is to print several copies of each letter, slightly set off from each other but overlayed. This isn't only ugly, copy/paste often yields something like BBBOOOLLLDD TTTEEEXXXTTT. Often the printed bold faux font doesn't look much like the screen bold faux font. And here we have your situation exactly.
    Now, I see only Tahoma and Tahoma-Bold on my computer too. You could see if anyone seels an Italic/BoldItalic version, or if they are bundled with some Microsoft software (which you'd need to own, the fonts can't be freely copied). But really this is sending the message - use a different font. I'd use Arial, where Windows has had all four files included since Windows 3.1 was released.

  • Incorrectly coloured text when saving to .PDF using Photoshop CS4

    I am using Photoshop CS4 on Windows 7, and have designed my own business card.
    When saving to .PDF to send to printers I am finding that a small section of text is saving with a white section to it, for example out of the 3 lines of text on the card the bottom left hand corner of the & sign I have in the design is coming out white, the rest of the text is a golden colour.
    I have tried searching on this forum and on google but can't seem to find anyone with my actual problem so unsure where to go.
    Any help much appreciated.
    Thanks

    Mylenium wrote:
    Well, you could change the native text color instead of using layer styles, could you not?
    Mylenium
    Or make the Type and Hyphen layers into a single Smart Object and clip a yellow layer to it.

  • Dots are appearing on characters after created PDF through *.dwg file using AutoVue API

    Hi,
       I created PDF's through *.dwg file using AutoVue API 20.2.2. I observed in more zoom of PDF, every character or line has dots. At the same time on second page of PDF drawing lines are thicker that first page of PDF.
       Please kindly help on this, how to remove dots and drawing lines are published same as on first page.
    Thanks,
    Siva

    As with any format that does not support zoomable line thickness, the output is dpi dependent
    Imagine the DPI impact on a PDF is similar to the DPI on an image, except you can zoom into the lines, they look smooth (it is vector) but the position for the specific points is not as accurate as it should
    So it all boils down to how are you generating the PDF?

  • Why isn't my portrait page numbering showing up on landscape pages after creating PDF from Word?

    I have a lengthy Word document that has portrait and landscape oriented sections. The landscape sections have page numbering set up so that on screen it appears on the left, but in the printed book will have the page numbers in the same place as the portrait pages. For some reason when I create a PDF using the Adobe tab in Word and embed the fonts though, the portrait page numbers on my landscape pages do not show up. Does anyone know if there's a box or something I'm not checking?
    I'm using Microsoft 2010. Let me know if any other details are needed!

    Hi Liz,
    Can you share the file with me at [email protected] so that I can have a look.
    Regards,
    Anoop

Maybe you are looking for