Imlpementing EULA / end user declaration using OIM/OAM

Hi,
We have a requirement in which we have to make user accept EULA /end user declaration prior to adding details in portal, does any one has pointers on how to do the same using OIM/OAM.
Early response would be much appreciated.

I would have done it in this way: Assuming you have decent knowledge of using existing components of OOTB connector for re-usability. Also I have never tried this, its just an approach which could possibly work.
- The only way for an end user to change its own password in OIM is via self-service which means the tcUtilityFactory would be instantiated by the user itself. If that is the case then you can obtain the User ID in the pre-insert entity adapters/plugin. Now when the password reset operation is being done, you can check the User ID of the Logged In user and the Target User and take a decision whether it was the user itself or some other admin.
- If it was some other admin then you can set the Force Password Change at next Logon check-box in the User Profile to true.
- Now modify the Change User Password task to use the IT Resource connection credentials if that check box is selected to create a connection OR use the credentials form the Process Form if that check box is not selected.
This way the connection to the LDAP would be done via the user itself if it was a self-service password reset and your LDAP Policy would have no complaints.
Assumption The user has the permissions to establish a JNDI connection with SDS and modify its own account which I am sure would be there.
Thanks
SRS

Similar Messages

  • Can't avoid end user license, using acrobat.jar

    Hi everybody!
    I want to display a pdf from my Swing application, so I've decided to use Adobe Acrobat Viewer (acrobat.jar). But, when I run SampleReader example, first it appears the Adobe Acrobat Viewer's End User License Agreement, before the viewer itself.
    What can I do to avoid the license agreement? Can I get any license anywhere? Help me please!
    Thanks!!

    I think Adobe have made their software behave this way on purpose, because they want it to be that way. I don't think this has anything to do with Swing.
    Also you don't need to "get any license anywhere". The whole point of an EULA splash screen is that when you click "I Accept" or whatever, that is when you get the license.
    Cheers,
    Matt.

  • Office 365 Basic end user authentication using API without using powershell

    I have an Office 365 username and password. I need to authenticate the credentials without using powershell. I mean by using REST API. I was able to authenticate the admin user using client id and secret along with their username and password.
    All I need is to authenticate an end user using his username and password using graph api or any REST api.

    So you probably need to ask in the dedicated O365 forum:
    http://community.office365.com/en-us/f/default.aspx
    Or maybe an Azure AD forum ?
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Deploying a report to the end user without using Crystal Reports Server

    Hello,
      I'm using Crystal Reports Professional XI.
      I finished creating a report that contains several subreports.  Now it's time for me to deploy the report to the end user so that they can start running it.  The company that I'm doing this consulting work for does not have Crystal Reports Server setup so what is the best approach to deploying this report to the end user?  For now it would just be one user using the report but down the road there could be other people within his department that are running it as well.
        if you have any questions or need additional information to answer my posting just let me know.  Have a good day.
    Regards,
    Ting

    Hi Ting,
    I see now.... In older versions of CR like 8.5 there was a Deployment Wizard one could use to compile the report and runtime into an executable to run on an end users PC so that user could preview and refresh the reports.
    That ability stopped as of CR 8.5 or earlier, I don't recall exactly now.
    Yes, if they want to be able to run your report they will need to install a copy of Crystal Reports, then just send them your RPT file, they can then set Database location to their DB Source and then preview and refresh the report as required.
    Or as mentioned use a third party app to do the same or write your own. It's quite simple to do and likely one of our samples applications is all you need with a few basic changes, report source and DB log on info would need to be updated.
    As for licensing, the end user must purchase a copy of Crystal Reports to be able to use your application. Third Party app's would include the licensing mostly but check with them if you go that way.
    The convenient part is if the users want to write their own reports they can.
    And for your sake if you want to protect your reports the next version of CR has a read only RPT file format that all the user can do is preview and refresh the report. They can not edit it in anyway.
    Thanks again
    Don

  • OIM11gr2 - How to get currently logged in user details using oim api

    Hi All,
    I have a requirement to retrieve currently logged in users profile in the process adapter.
    I have tried with getSelfProfile in tcUserOperation and also ContextManager.getOIMUser API's however, in both the cases i am getting xelsysadm details only.
    Also as know request details in Process task mapping doesnot work for OIM11g onwards (its returning column not found exception )
    DOes any one has idea how to achieve this.
    PS. - i am using platform to retrieve API's.
    Thanks & Regards
    Swati Pandey

    You can get the logged in user name using the below java code:
    ADFContext adfCtx = ADFContext.getCurrent();
    SecurityContext secCntx = adfCtx.getSecurityContext();
    String user = secCntx.getUserPrincipal().getName();
    HTH

  • Advance Analysis for Microsoft Excel  How end user will use this  ?

    Hi ,
    I am working in Advance Analysis for Microsoft Excel Reporting tool,  Now i am working in my system , how the end user will interact with this report ?
    Is there any link is there , we need to send them  or they will also open this from the system only ??

    Hello Guru BI,
    Advance Analysis is only for micorsoft excel. You can check with your contact at SAP (TQM / Sales Representative) to check other solutions to have analysis on Web.
    For the Analysis Office the only way to have informations at the web is like described at the latest reply.
    For new solutions on web you can check the following links that have a brief describe of the web solutions:
    http://www.sap.com/solutions/sapbusinessobjects/large/business-intelligence/reporting-analysis/analysis-olap/index.epx
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e07439f8-ba1c-2e10-98a8-f8d552eb31ff?quicklink=index&overridelayout=true
    http://download.sap.com/download.epd?context=2D1D4DC34C0587B40660C12B4FD45C056D1BBE530E157D0EB6F2D54F126F520566AE5C5190940F14133BABCD0BF7DA7DCA12BBEC6228CDB1
    Thanks
    Diego Ferrary

  • What is the permission to restrict end user to use Report builder

    Hi experts,
     What is the permission to restrict send user to user report builder in SSRS?
    Thanks

    Only member of the role "Report Builder" can use the Report Builder to create reports:
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • What are the major challenges for the end-user in using Positive Time Management

    Hi Seniors,
    Can anybody please provide me some data on the same.
    Thanks.

    Hi,
    Positive time management is slightly difficult to implement compared to negative time management.
    In negative time management, you use planned working times + deviations in time evaluation.
    In positive time management, you record actual times through time recording system. You have to bring these times to SAP through an interface and then evaluate the actual times against the planned times and accordingly pay them out. You would need to pay attention regarding the integration between SAP R/3 and time recording system.
    Building rules for positive time management is slightly more challenging compared to negative time management.
    Kindly go through the below documents on positive time management which will give you more idea about the same.
    Integration of Time Recording Terminals with SAP R/3
    Determination of First Clock In & Last Clock Out in Positive Time Evaluation
    Late Coming, Early Going and Unauthorized absence
    Prorated Grant of Absence Quota for Contract Period in Time Evaluation
    Splitting of Overtime Hours after X Hours in Time Evaluation
    Rounding off Overtime Hours Generated via T510S table in Time Evaluation
    Public Holiday Calendar and Work Schedule Rules
    I hope these are helpful to you.
    Thanks and regards,
    Vivek Barnwal

  • How do I activate the end user agreement so I can download pdf files to safari

    The question is this :
    Why does the message come up saying:
      Before proceeding you must first launch Adobe Acrobat and accept the End User License Agreement.
    This occurs when I try to download a PDF file using the browser Safari version 7.06 on a Apple Computer using the operating system
    OS X version 10.9.4.
    I am able to use the adobe acrobat reader regularly but not through the browser.
    Thanks for any help.

    As Deepak already asked above, can you please let us know if you have both Reader and Acrobat installed? If so exact version of the applications.
    After you finished installing did you launch the Reader or Acrobat from your /Applications folder and accept EULA(End User License Agreement)?
    Please try this:
    Quit Safari
    Go to /Applications/ and launch Adobe Reader or Acrobat which ever is installed.
    Accept End User License
    Now launch Safari and View PDF.
    Please let us know if this resolves your issue.

  • How to find out wheter user is using WINGUI or SAPGUI

    Is there any ABAP function module or clsas method to check the GUI TYPE?
    I'd like to know whether the end user is using WINGUI or SAPGUI.

    have a look at BDS_GET_GUI_TYPE
    ICL_GET_GUI_TYPE
    reward points if helpful

  • End User Login Message

    Hi Folks,
    Our production IDM setup has 3 IDM instances sharing the same repository. The IDM End user is used for setting passwords in IDM and LDAP.
    Recently, couple of users have reported this error while trying to log in into IDM end user login page.
    "Your password has expired for account xxxxxx. Please change it now.
    Item User:xxxxxx was not found in the repository, it may have been deleted in another session."
    I had seen an earlier posting on this but there were no answers. Does any have a clue why this happens?
    Any lead will be greatly appreciated.
    Thanks in advance!
    Suvesh

    Hi shivjansi,
    This is normal behavior for the service desk.  It gives end-users a limited UI compared to the ticket processors.  Unfortunately the features of the limited UI are hardcoded so you cannot configure the UI so that end-users get two tabs while a ticket processor gets all six tabs. This may change in SolMan 7.1, let's hope so
    SolMan determines if a user is an end-user by checking the auth object
      CRM_TXT_ID
          Activity <ACTVT>: 02
          Text ID <TEXTID>: SU15
    If the auth check for this auth object fails, then the user is considered to be an end-user and they get the limited UI.
    Good luck!
    Jon

  • End User Authorizations and Roles

    Hi,
    What all the authorizations i need to give to an End User, who uses the device.
    Is it necessary for the userid to be same in <b>MI Client, MI server, Backend</b> systems.
    Let me explain wat an end user does
    >logs into MI client
    >performs first synchronization
    >Executes Mobile Application assigned
    >and performs synchronization at the end of the day
    rgds,
    Kiran

    Hi Kiran
       Probably I wanst clear with my reply.  You need to assign both the above mentioned authorizations to the same user who is performing a sync from the MI Client.  S_ME_SYNC is required for the user to perform a sync from MI Client to MI server.  S_RFC is required for the same user so that the data can be transferred from MI server to SAP backend and vise versa. 
    Hope I am clear now
    Best Regards
    Sivakumar

  • Fields in fillable form truncated by end-user

    My fillable .pdf is working fine here in our office.  But, when I send it to an outside end-user, some of the fields are being truncated.  One of the fields is a phone number field, that I have set-up with the 'phone number' format.  It is not defaulting and auto-fitting by the end user.  Another field is a simple 4 character limited field, with auto font fit (I hope I am using correct terminology here).  With the end-user, they are inputting the info, but the font is staying large and not fitting in the field.  The end-user is using Acrobat X, the same as I am.
    Any clues?
    Julie

    Okay, George... Looks like your original thought about it being a Mac was correct. :-)  Although, the end-user was not using the Mac... the person from our office that *sent* it to the end-use was using the Mac.  Thus, it somehow 'corrupted' (not sure that is the correct verbiage) the file.  So, when I sent the file to the end-user through my PC, it worked just fine... or so it seems.  I have received back forms from two of my 'test' end-users and they say it works great! :-)
    Thank you so much!  It was very kind of you to work on emails with me, as well!
    Julie

  • Unable to Create End User in Apex 4.0.2

    I want an End User to use an application without seeing Development links at the bottom (like 'Edit page x' or 'Session' or 'Debug'). I go to the Administration tab, click 'Manage Users and Groups', and click Create User. In the Account Priveleges section I specify 'No' for User is a Workspace Administrator. I specify 'No' for User is a developer. I fill in the mandatory fields and click 'Create User' at the top.
    It processes the action BUT on the following page, for the row created representing the new user, the Account Type says Workspace Administrator and not End User. If I log in with the new user I see developer tabs at the bottom.
    How do I create an End User?
    I obtained APEX 4.0.2.00.08 by downloading Oracle Express 11g if that helps.

    Custom Authentication is behaving like an End User account, which is good - no developer tabs at the bottom. I used something similar to Chapter 11 of the Advanced Tutorials guide:
    CREATE OR REPLACE FUNCTION acl_custom_auth (
    p_username IN VARCHAR2,
    p_password IN VARCHAR2)
    RETURN BOOLEAN IS
    BEGIN
    FOR c1 IN (SELECT 1
    FROM acl_employees
    WHERE upper(userid) = upper(p_username)
    AND upper(last_name) = upper(p_password))
    LOOP
    RETURN TRUE;
    END LOOP;
    RETURN FALSE;
    END;
    /

  • How to stop user from using 961 mvt type in MB1C transaction code?

    Hi Friends,
    We have two companies. Already we have restricted end user for using 961 & 962 mvt type in MB1C transaction code in one company code 1000. Now, we want to restrict end user for using 961 & 962 mvt type in MB1C transaction code in other company code 1200.
    I have checked configuration using OMJJ transaction. But, it is there so there may be some different way of control.
    Can any body help me?
    Regards
    Siva

    Hi,
    To restrict/block the movement type,  the steps are:
    1. use transaction code OMJJ.
    2. Enter the movement type you want to block.[From 961 To 961](do for both961& 962)
    3. Select the Second option in the List which appears in the left. (Allowed Transaction).
    4. Remove the transaction codes (MB1C)from where you do not want to use that particular movement type& save.
    For user specific to block the movement type, pl consult Basis Consultant.
    Regards,
    Biju K

Maybe you are looking for

  • Delete and update records in Stored procedures

    I AM NOW STUDYING A STORED PROCEDURE ,AND I ENCOUNTER SOME PROBLEM WITH UPDATE AND DELETE SOME RECORD WHICH ONE IS UPDATED OR DELETED, THIS IS MY CODE: PACKAGE table_of_array IS type emp_rec is record(      empno emp.empno%type,      ename emp.ename%

  • Pivot Query with Top N

    Oracle 10g I have formed the following query; select cell      , plot_number      , max(decode(drnk, '1', tree_height*100)) ht_1      , max(decode(drnk, '2', tree_height*100)) ht_2      , max(decode(drnk, '3', tree_height*100)) ht_3   from (select ce

  • Odbc layer error 01004

    Using Essbase 7.0.1 I have several load rules calling SQL data I copied from one server to another. On the new server some rule files work fine but some dont . I am getting the following error message in the log file. ODBC Layer Error: 01004 ==> [[mi

  • Error:CW_FILES_RESOURCE_TYPE not properly installed on creating workspaces

    Hi We are on OCS 10.1.2 on Windows 2003. When creating a new workspace using the Basic Template, we get the error: The resource CW_FILES_RESOURCE_TYPE is not properly installed. From log in apps\j2ee\OC4J_OCSClient\application-deployments\workspaces\

  • Iphoto transfer from mac to iphone

    How do I transfer photo folders (that I'd like to select, not all) from iphoto 9.6 on my macbook pro (OS X yosemite 10.10.1) to my iphone 5c (iOS8.1.2)