Implementing Differential Equations using Labview fpga modules on PXI-7811R

Dear,
I am working on implementing dynamic systems modeled ordinary differential equations on PXI-7811R FPGA using labview FPGA. Is there any body who can help me how to implement differential equation on PXI devices uding Labview FPGA, please? Is there any integrator in Labview FPGA, module. I used Discrete Integerator in LAbview FPGA module in Maths palette, but i hesistated if it really works . I really appreciate your help,
Gammee

Thank you for posting on the discussion forum.
You can solve differential equations using LabVIEW FPGA but you may run into some significant difficulties in doing so. If you are not tied to using FPGA, you could try using LabVIEW real-time, which may make things much easier. But if you would like to stick with FPGA, see the link below for a list of examples that may be helpful:
http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/ssnav:ipn/q/differential%20e...
Below is a link that you can review to better understand the functionality of the discrete integrator should you choose to go that route:
http://zone.ni.com/reference/en-XX/help/371599B-01/lvfpga/discrete_normalized_integrator/
I hope that helps.
Best,
Rachel
Rachel D.
Applications Engineer
National Instruments

Similar Messages

How can I install (download) a Labview FPGA code onto Altera FPGA chip using Labview FPGA module?

Hi there
Guys i'm a very new labview user (PhD student), my project is about ( design and implementation of a high speed-yet sophisticated system using Labview environment then install this project's code (using Labview FPGA module) onto Altera-made FPGA chip).
so kindly, can any body help me in this?...is there any way to connect labview with Altera FPGA?...please anything would be said 'd be of great benifits
thanks a lot in advance.

as previously mentioned, labview fpga only supports national instruments targets utilizing xilinx fpgas. the hdl generated by labview fpga is encrypted and cannot be used to synthesize a design outside the labview fpga design flow.
however, if you must use labview for your project, it might be possible for you to design the system in labview and use one of the labview embedded modules ( http://www.ni.com/embedded )to generate c code which you can then port to systemc and compile for the altera fpga. i'm not saying it will be easy, but it should be possible.

Labview fpga module 8.6

I want use labview FPGA modul 8.6 can somebody help me to dowlaond this modul thanks

Hi scream,
It would best contact your account representative within National Instruments, they will be able to determine how to best deliver this module to you. Thanks!
Matt S.
Industrial Communications Product Support Engineer
National Instruments

Can i use Handle C with the LABVIEW FPGA module?

Hi,
Can i use Handle C with the LABVIEW FPGA module? I am working with CompactRIO right now so, i want to know weather i can use Handle C with CompactRIO.Can i access FPGA in compactRIO independant of LABVIEW means can i program it without using LABVIEW?
regards,
Vishnu.

Hi Vishnu,
Although we don't support Handel-C directly, it is possible to design your algorithms using 3rd party tools or system integrators and consume them from a top-level LabVIEW VI. The webcast at http://zone.ni.com/wv/app/doc/p/id/wv-268 shows an example of how you can use IP from C-based tools provided by Celoxica in the LabVIEW FPGA environment.

Can LabView FPGA module work with non-NI FPGAs?

Simple Question: Can the LabView FPGA Module work with other FPGAs? Im assuming yes, but id like ot make sure first. Normaly I go with NI for most of my stuff, but they just are lacking in the FPGA hardware for what I need, but Im accustumed to LabView so I would like to stick with that to program it.
Thanks!
-Mark

Using LabVIEW and LabVIEW RT you can access the registers on any PCI/PXI card using the NI-VISA driver. NI-VISA also allows you to handle interrupts and DMA data. For interrupts you will not actually write an interrupt service routine (ISR) in LabVIEW. Instead the VISA driver will acknowledge the interrupt to the card and then pass a VISA event to the LabVIEW application letting the application know that it needs to process the interrupt. Detailed information about this type of programming is available in the following documents.
Using the VISA Driver Development Wizard and NI-VISA to Register-Level Program a PXI/PCI Device unde...
Configuring LabVIEW Real-Time and NI-VISA to Recognize a Third Party Device
Configuring LabVIEW Real...
Developing a LabVIEW Real-Time Driver for a PXI or Compact PCI Device
Porting a Windows PCI Device Driver to LabVIEW Real-Time
Considerations in Implementing LabVIEW Real-Time Drivers
Christian L
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has occurred

Hi,
I am trying to build a LabView FPGA VI. During compilation, I always get error stating "LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has occurred. Please contact National Instruments technical support at ni.com/support". At the time, comiplation process is almost at the end. "Final Timing (place and route)" shows as completed. When Checked the Xilinx log session, at the end it states that " Process "Generate Programming File" completed successfully". However, I do not see any generated bitfile.
When clicked on error details, it shows following:
LabVIEW: An unknown error occurred.
Error -2629 occurred at Error occurred while loading XML string. Invoke Node in niFpgaXml_PrettyPrint.vi->niFpgaWriteBitfileXml_Core.vi->niFpgaCompileWorker_CreateBitfile.vi->niFpgaCompileWorker_JobComplete.vi->niFpgaCompile_Worker.vi:6460001
Possible reason(s):
LabVIEW: An unknown error occurred.
I tried multiple times but so far no luck to generate bitfile for this VI. What could be wrong here?
I am using Labview 2013

Hi Mark,
Here is the device utilization Summary. My development system is running with Windows-7 (32 bit) with 3GB RAM and Labview 2013.
Device Utilization
Total Slices: 90.0% (11970 out of 13300)
Slice Registers: 40.7% (43258 out of 106400)
Slice LUTs: 71.6% (38103 out of 53200)
DSP48s: 1.4% (3 out of 220)
Block RAMs: 22.1% (31 out of 140)
Timing
40 MHz Onboard Clock
: 40.00 MHz (57.90 MHz maximum)
80MHz (Used by non-diagram components)
: 80.00 MHz (100.19 MHz maximum)
--WillsG

How do I install Labview 64 bit support for the labview fpga module?

see subject.

Hi,
The LabVIEW FPGA Module uses the 32-bit version of the Xilinx tools, even on the 64-bit OS.
There is no 64 bit version of LabVIEW FPGA and you must have LabVIEW 32 bit
installed on your 64-bit machine to use the compatible version of
LabVIEW FPGA.
NI LabVIEW FPGA Module will run within the 32-bit emulation layer, Windows on Windows (WOW64).
regards,
Houssam Kassri
NI Germany

Can we simulate a rs 232 bus using an fpga module

i would like to replace a communication bus (UART, baud rate - 200K) with FPGA card(7831). is it possible to simulate this one???

Hi,
Yes, check out the RS-232 Interface Using the LabVIEW FPGA module on the Developer Zone. You can also find additional examples and tutorials for the LabVIEW FPGA Module here. You may need to modify the application to get the specific rate that you need but that rate is attainable.
Good Luck
Mike

Labview fpga module Spartan 6 LX9 FPGA

Does Spartan 6 LX9 FPGA supported in labview FPGA module ?

varunme,
The only FPGA targets that can be programmed with LabVIEW FPGA are National Instruments FPGA products (cRIO, sbRIO, R-Series, FlexRIO, etc) and the Xilinx Spartan 3E XUP board. Unfortunately, LabVIEW FPGA doesn't support third party devices containing the LX9 FPGA.
-Nick-
Nick C | Staff LabVIEW Platform Product Support Engineer | National Instruments

Using Labview realtime module in RTAI

hello everyone,
i want to use Labview realtime module in RTAI for real time applications beacuse of it's free source and very good performance. is it possible to do this work?
if it is, can anyone introduce some same case study or something similar to this?
Solved!
Go to Solution.

amirsaman wrote:
hello everyone,
i want to use Labview realtime module in RTAI for real time applications beacuse of it's free source and very good performance. is it possible to do this work?
if it is, can anyone introduce some same case study or something similar to this?
I don't think that is possible for anyone outside NI. LabVIEW realtime supports at this time only Windows as development host and as target only National Instruments hardware with specifcally targeted OSes or the Pharlap ETS system on x86 systems with a somewhat specific hardware configuration. Using RTAI as target OS for LabVIEW realtime applications would require first some modifications to the LabVIEW realtime plugin to support this new platform.
Also none of the LabVIEW realtime files created for either the NI platforms running VxWorks or Pharlap OS, or the Pharlap ETS system woud be possible to get deployed to a RTAI system, as they are not compatible. You would in the first place have to port the whole slew of shared libraries that make up the realtime LabVIEW runtime system on one of these targets to your RTAI system which is basically a completely new LabVIEW target platform that you can only create with quite a bit of effort from the LabVIEW source code. It's not really impossible for NI as most of the LabVIEW code is written quite platform independently but it would be a combination of the compile settings for current LabVIEW realtime, with settings to produce LabVIEW VxWorks realtime targets with some extra Linux settings. Yet it would be by far not trivial and some of the parts are actually hardware specific drivers which have to be ported too, and limit the possibility of what RTAI hardware could be used even further. In short not something that would make any commercial sense to NI as they would have to invest a lot of resources without any possibility to sell extra hardware.
And hell is freezing up before NI releases LabVIEW source code in any form that would give non-NI employees access to it!
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

LabVIEW FPGA Module Error Code 10 when creating bitfile

I am recieving the following error message when trying to compile a vi:
Internal Error
An internal LabVIEW FPGA Module error occurred at the following stage: Creating Bitfile.
Error Code: 10
Error Text: Create Folder in nirviRecursiveCreateFolder.vi-
>nirviRecursiveOpenFile.vi->nirviWriteBitFileInformation.vi-
>nirviCompileDownload.vi->hardware_template.vi
If this problem persists, please contact National Instruments.
Any help would be appreciated. I am not very familiar with LabView, and am trying to run code generated by a grad student several summers ago. If more information is needed, let me know and I will try to provide it.
Thanks

Arkolbus-
It sounds like the compiler is having some trouble creating a folder that it needs to generate the bitfile. First, check all of the usual things: are you an administrator? do you have worte access to the "FPGA Bitfiles" folder in your project?
If it looks like you should be able to write the file, you can try posting your project (zipped) and let someone on the boards try to compile it (be sure to let us know what the versoin is). If we can compile it without issue you may want to try repairing your FPGA module installation.
Xaq "Bulldozer"

How to open an app using LabVIEW PDA Module 7.1

Hi,
i´m developing an app using LabVIEW PDA Module 7.1 that needs to open a
standard application (in particular, the default camera application) on
my PDA (Qtek 2020 with Pocket PC 2003). Can anyone tell me how to do it?
Thanks,
Pedro Sampaio
Computer and Telecommunications Engineer Student
ESTG -IPL, Portugal

Olá,
Com o project podes fazer builr e deploy, a partiur daí tens a aplicação instalada na PDA.
Cumprimentos

How to implement wafer mapping using LabVIEW?

Hello LabVIEW Masters!
I am having an incoming project which includes controlling and gathering information from a PROBER. One of the difficulties I am having now is how to implement a WAFER MAP using LabVIEW. According to my customer requirements, the wafer element ranges from 6k to 23k. I guess doing all the element (one die = one led ctl/indicator) will be a hell of a task, especially on how to effectively manipulate each elements. Does anyone have better idea on how to this?
Please, I badly need your help..
Thanks and Regards,
Dennis DG
Solved!
Go to Solution.

Hi Dennis,
Is it okay if you send to me the working VI also?
No, it's not ok. I made that program for my customer...
As I am not too familiar in using intensity graph.
That's no reason to hand over programs for free...
My customer also request me that if the cursor hover on the wafer map, he wants the x,y corrdinates to be displayed.
I also have such a feature. Did you notice the little yellow cursor near the center of the wafer? One could easily change that to use a MouseMove event instead...
He also wants to select some elements in the wafer map and come up with the coordinate values to do some testing.
That's related to the cursor thing...
Some points:
- You have a customer that pays you. Why should I offer work for free?
- You can send me contact dates of your customer, I will make him an offer...
- When you take an job to provide software you should be able to code the software...
- The VI(s) are now some years old. I didn't code so well back those days and don't want to hand out those VIs as they are right now.
- I included some "license management" deep inside that program, I would have to remove this and spend time on testing afterwards...
- The VIs are based on the PROBER output format used by the customer. All the file handling has to be changed for/by you...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Labview 2010 Student Edition, will it work with the Labview FPGA module and Xilinx Spartan 3E??

Just as the title states.
I did a search here on compatibility, but I am coming up short with not much to show for it.
I have Labview 2010 student edition, 32bit and 64 bit. I am trying to do a Senior Design project for my undergrad, and I am having some issues.
I was able to download the Support for the Xilinx Spartan 3E and Labview FPGA.
I install it, it runs through the unzipping process, installs, and then mysteriously I cannot find it. I have looked through my programs list and it is not listed. I open both editions of LabView and I find ABSOLUTELY NOTHING indicating that either one has ANYTHING to do with FPGA.
Did I install it wrong? Or is it just not supported in the studend version of Labview???
Can someone help me, please?

M Boat wrote:
What about the trial version? Any chance of it being on there?
I think everything is available for download, and without activation it will be in trial mode and you have about a month (?) before the trial expires.
A trial version of the FPGA module is available for download here. I have no idea if it would work with the student version.
I would recommend to talk to your local NI sales representative for advice. Good luck.
LabVIEW Champion . Do more with less code and in less time .

How to use LabVIEW FPGA on Custom FPGA board other than NI products .....Also how to develop RTx DLL for a customised motion controller hardware

I'm using RTx, LabVIEW RT and LabVIEW FPGA.
The GUI is windows based. The motion control and FPGA are RTx based.
Is there any way to develop device drivers for the custom hardware in RTx. For example motion controller hardware, FPGA hardware, PCI hardware.
Is there a possibility to use custom FPGA boards to use with LabVIEW FPGA.
Please send me some links
Thanks
Bhoopathy
Take life as it comes! you may never know what's gonna happen Tommorrow

CODE WARRIOR Hello. I believe this question was answered in a previous post. Please let us know if you have any new questioins or if you need some clarification.
You are able to develop device drivers for your custom hardware using the NI Measurement Hardware Driver Development Kit.
However, it is not possible to use custom FPGA boards with LabVIEW FPGA. The FPGA boards have to be one of our R Series boards. Here are some links that should shed some light on the Measurement Hardware DDK.
Measurement Hardware Driver Development Kit Frequently Asked Questions
NI Measurement Hardware DDK (Driver Development Kit)
Please post if you have further questios.
Efosa O.
NIAE

Implementing Differential Equations using Labview fpga modules on PXI-7811R

Similar Messages

Maybe you are looking for