Import error IMP-00058

Hi,
I am importing a dump file into oracle 9.2.0.4 using import utility. I fired this import utility in nohup mode. It imported 5 tables and then took about 6-8 hours to import the biggest table and failed with the following error messages:
IMP-00058: ORACLE error 1013 encountered
ORA-01013: user requested cancel of current operation
IMP-00018: partial import of previous table completed: 336426 rows imported
It actually continued to import other tables and finished with warnings.
Can you please help me out with this issue? I cannot see any other error message. I checked the metalink and could not find any solution. All messages points to modifying sqlnet.ora file, but I am not using it anyway!!.
Thanks,
kapil

Solution Description:
====================
Bug 430972 is fixed in SQL*Net version 2.3.4. Please contact Oracle Support
Services to see if there is a patch available for your platform.
To workaround this problem turn off Dead Connection Detection (DCD) by
removing the SQL*Net parameter sqlnet.expire_time from your "sqlnet.ora" file.
Solution Explanation:
====================
Either applying the patch or disabling DCD will allow the export to run
successfully.

Similar Messages

Import error imp-00017: following statement failed with oracle error 1659:

Hi all,
I am trying to import a file (dmp) which is of 1.63GB size,
when I type
imp
dbname/pwd@db
c:\filepath
30720
no
no
yes
yes
yes
I am getting the error imp-00017: following statement failed with oracle error 1659:
-- end it says Ora-01659 unable to allocate minextents beyond 1 in tablespace USERS
--unable to create INITIAL extent for segment in tablespace USERS
--import terminated successfully with warnings
when I looked into
select maxbytes,file_name from dba_data_files where tablespace_name='USERS';3.4360+10 c:\oracle\product\10.2.0\oradata\orcl\users01.dbf
kindly help me in solving this is.
Regards,
aak
Edited by: AAK 460425 on Apr 12, 2009 6:33 PM

Thanks,
select bytes from user_free_space where tablespace_name='USERS'
BYTES
458752
720896
458752
655360
43384832
is the size less?
My apology I have updated this in the below thread, which is same as this one.
Re: Import error

Import error IMP-00017 and ORA-01950 no privileges on tablespace

Hi,
I am trying to do a full import into a 10.2.0.4 database from a 9.2.0.6 export dumpfile. The tablespaces have already been pre-created. I got this error on one tablespace, and I can't figure out why because I was using SYS to do import, how come SYS doesn`t have this privilege. All objects in other tablespaces were created without this problem.
- IMP-00017: following statement failed with ORACLE error 1950:
"CREATE TABLE "FYAERLG" ...
- ORA-01950: no privileges on tablespace 'INFOTABLES'
Please help.
Thanks
-lixidon

Who is the owner of "FYAERLG" ?
Try granting the owner of the table, quota on INFOTABLES tablespace.
**Added**
Note [95554.1|https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=95554.1] explains a scenario,which could be the reason for this failure.
Edited by: Bobcatalog on Jan 8, 2009 12:49 PM

Oracle Import errors IMP-00098, IMP-00028 , IMP-00008

Hi all
I have successfully exported a schema called ahc from Database 10g Enterprise Edition Release 10.2.0.1.0 on linux.
but when i imported in test db server running the same OS and Oracle Versions.it returnd errors .
i took the export three times but got the same error while importing.
here is out put
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.02.01 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
export client uses US7ASCII character set (possible charset conversion)
. . importing table "ADM_DTL" 0 rows imported
. . importing table "ADVANCES" 1 rows imported
. . importing table "BANK" 10 rows imported
. . importing table "BASIC" 2 rows imported
. . importing table "DESIGN" 240 rows imported
. . importing table "DISTRICT" 26 rows imported
. . importing table "EMPLOYEEMAIN" 3 rows imported
. . importing table "GRADES" 185 rows imported
. . importing table "ICD" 15413 rows imported
. . importing table "MAINCODES" 336 rows imported
. . importing table "QUALIFICATION" 15 rows imported
. . importing table "SALARY" 2 rows imported
. . importing table "SPALLOWANCE" 16 rows imported
. . importing table "TBL_LAB_GROUP" 470 rows imported
. . importing table "TBL_LAB_MAIN_DTL" 231992 rows imported
. . importing table "TBL_LAB_MAIN_MAS" 79552 rows imported
. . importing table "TBL_LAB_OPINION" 856 rows imported
. . importing table "TBL_LAB_RESULT"
illegal lob length marker 32770
bytesread = 00000000000
TABLE = TBL_LAB_RESULT
IMP-00098: INTERNAL ERROR: impgst2
IMP-00028: partial import of previous table rolled back: 137170 rows rolled back
IMP-00008: unrecognized statement in the export file:
IMP-00008: unrecognized statement in the export file:
IMP-00008: unrecognized statement in the export file:
*¿4¿¿¿E¿N¿*
*#¿U="¿1¿¿¿¿;¿~¿O¿¿¿w4H¿¿¿"¿"¿>`N¿¿G¿¿¿¿¿¿¿¿'¿$V¿¿¿¿¿6¿i¿2Xn¿.¿¿_<5H¿¿q¿¿¿¿¿<c¿¿#U07¿¿¿n¿Uh¿*¿¿¿¿¿N¿¿¿v+2db¿9¿¿#jd¿¿¿7¿At¿(*
*IMP-00008: unrecognized statement in the export file:*
*¿¿¿V )((*
*IMP-00008: unrecognized statement in the export file:*
*¿H¿m¿¿*
*IMP-00008: unrecognized statement in the export file:*
*IMP-00008: unrecognized statement in the export file:*
*IMP-00008: unrecognized statement in the export file:*
c¿1
IMP-00008: unrecognized statement in the export file:
*¿¿¿¿¿PIz¿o/¿¿o¿O¿\¿7¿¿f¿¿¿(¿¿@ @*
IMP-00008: unrecognized statement in the export file:
*¿¿¿"¿¿G¿0¿U¿v¿¿1!¿J¿f>¿¿¿44s¿RYD¿j¿¿¿c¿!¿*
*IMP-00008: unrecognized statement in the export file:*
*¿¿v)<¿¿i¿:f¿A@*
*IMP-00008: unrecognized statement in the export file:*
*IMP-00008: unrecognized statement in the export file:*
*IMP-00008: unrecognized statement in the export file:*
*IMP-00008: unrecognized statement in the export file:*
*IMP-00008: unrecognized statement in the export file:*
*IMP-00008: unrecognized statement in the export file:*
*¿%¿1¿¿¿K@*
*IMP-00008: unrecognized statement in the export file:*
*IMP-00008: unrecognized statement in the export file:*
*:BLAN.TERMID:=:GLOBAL.TERMID;*
*IMP-00008: unrecognized statement in the export file:*
*:BLAN.SHIFT:=:GLOBAL.SHIFT;*
*IMP-00008: unrecognized statement in the export file:*
*IMP-00008: unrecognized statement in the export file:*
*END;*
*IMP-00008: unrecognized statement in the export file:*
*IMP-00008: unrecognized statement in the export file:*
*r100g0b100¿¿*
*IMP-00008: unrecognized statement in the export file:*
*00r25g100b75@*
*IMP-00008: unrecognized statement in the export file:*
*00r50g100b75¿*
*IMP-00008: unrecognized statement in the export file:*
*00r75g100b75¿*
*IMP-00008: unrecognized statement in the export file:*
*00r88g100b75¿*
*IMP-00008: unrecognized statement in the export file:*
*IMP-00008: unrecognized statement in the export file:*
Import terminated successfully with warnings.
Edited by: farnaw4u on Feb 26, 2010 10:17 AM

Hello,
You may experience a bug or a corruption in the "dump". If it's a corruption you may retry your export/import.
But, anyway, the classical Export/Import is not recommended. Starting with 10.1 you should use Datapump
(expdp/impdp).
Please, find enclosed a link about this utility:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/part_dp.htm#i436481
Hope this help.
Best regards,
Jean-Valentin

Mapviewer demo Import error ( imp-00980 )

I'm encountering an import problem when attempting to import the mvdemo.dmp sample data that is included with the Mapviewer demo into Oracle 9i PEdition. Is there a problem with the the EXP coming from Oracle v8? Here is a sample of the error log output:
Export file created by EXPORT:V08.01.07 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
export client uses US7ASCII character set (possible charset conversion)
export server uses US7ASCII NCHAR character set (possible ncharset conversion)
. importing SCOTT's objects into SCOTT
. . importing table "STYLES" 250 rows imported
. . importing table "THEMES" 7 rows imported
. . importing table "MAPS" 2 rows imported
. . importing table "CITIES" 195 rows imported
. . importing table "COUNTIES" 3230 rows imported
. . importing table "INTERSTATES" 239 rows imported
. . importing table "STATES" 56 rows imported
IMP-00017: following statement failed with ORACLE error 980:
"BEGIN "
"execute immediate 'INSERT INTO USER_SDO_GEOM_METADATA values (''CITIES'','"
"'LOCATION'',mdsys.SDO_dim_array(MDSYS.SDO_DIM_ELEMENT(''X'',-180,180,.00000"
"005),MDSYS.SDO_DIM_ELEMENT(''Y'',-90,90,.00000005)),NULL) ' ; "
"COMMIT; END;"
IMP-00003: ORACLE error 980 encountered
ORA-00980: synonym translation is no longer valid
ORA-06512: at line 2
IMP-00088: Problem importing metadata for index CITIES. Index creation will be skipped
I have discovered that the following view does not exist in the db:
USER_SDO_GEOM_METADATA
Help would be appreciated.
-Peter

Try connecting to the database as mdsys.
Look for a table called sdo_geom_metadata_table, and if it is there see if there
is anything in it. If there isn't anything in it, or it isn't there, try executing:
prvtgmd.plb from ORACLE_HOME/md/admin. It looks like the
views might not have been created correctly.
Dan

Import Error - while trying higher to lower version

When I try to import dump from -
Version 10.2.0.1.0 to Version 10.1.0.2.0 ; i'm getting error as
==>
IMP-00058: ORACLE error 6550 encountered
ORA-06550: line 1, column 33:
PLS-00302: component 'SET_NO_OUTLINES' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
IMP-00000: Import terminated unsuccessfully
==>
pls suggest me how import the dumpt.
Subir

...then import with lower version againThe official way should be export with the lowest version of export utility, but import with the import utility in the same version of the target database (where you are importing).
Metalink note 132904.1
Nicolas.

Import Error: Urgent

Hi All
I am having problems importing a .dmp file which a colleague gave me.. into a current instance of my own database...
We have imported the database on to his machine and another test machine but my laptop is still having problems..
I am using a batch file which reads:
Input
imp lmsadmin/lmsadmin file=GM.dmp fromuser=lms touser=lmsadmin full=N
pause...
Output
c:\gmdatabase> imp lmsadmin/lmsadmin file=GM.dmp fromuser=lms touser=lmsadmin full=N
pause...
Import: Release 9.2.0.1.0 - Production on Mon Sep 18 11:06:43 2006
Copyright (c) 1982, 2002, Oracle Corporation. All Rights Reserved.
IMP-00058: ORACLE error 12560 encountered
ORA-12560: TNS:protocol adapter error
IMP-00000: Import terminated unsucessfully
c:\gmdatabase>pause
Press any key to continue...
Please can anybody help...

1. I do have the database i am importing on my
laptop...
2. how would i specified the mode within the batch
script?imp is a client-side tool, so you need to specify how to connect to the (database) server. Either set ORACLE_SID or use a connect string.
Modes and how to specify import parameters can be found in the docs.
Specifying fromuser=name and full=N may look somewhat confusing, but syntax allows it. However if you "activate" both modes
$ imp system file=per.dmp fromuser=hej full=y
you'll end up with
IMP-00024: Only one mode (TABLES, FROMUSER, or FULL) can be specified

Import Error in 9.0.2.3

I'm trying to do a full import in 9.0.2.3 but about five minutes into the import i get the following error:
IMP-00003: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
IMP-00003: ORACLE error 3114 encountered
ORA-03114: not connected to ORACLE
I'm running the import on the db server itself with the import file residing on the server as well. What could be causing this?

what is the command using for imp. for doing imp, userid/password has to be entered.. did you try to connect sqlplus by using same id/password and does it connect to sqlplus.
Also check oracle_sid to make sure you are in the same instance where you have userid and password..
these are my guess to begin with.. problem could be somewhere else too..

IMPORT ERROR Number 2

i run this import command at dos prompt:
c:\imp system/system file=c:\x.dmp full=y
i got this error :
IMP-00017 : following statement failed with oracle error 4068: "BEGIN SYS.DBMS_REPCAT_MIG_PRE_IMPORT; END;"
ORA-04068 : existing state packages has been discarded
ORA-0463: package body "SYS.DBMS_REPCAT_MIG_INTERNAL" has errors
ORA-06508 : PL/SQL could not find program unit being called
ORA-06512 : at "SYS.DBMS_REPCAT_MIG", line 95
ORA-65512 : at line 1
IMP-00000 : imp. terminated uncuccessful
how to solve this?

Just a word of advice to a newbie...
You started all new threads on this same problem at (all times are my local)
10:00
10:29
11:02
11:04
11:04
11:11
Ok, some of those around 11:02 - 11:04 could be due to network problems, we've all had that experience. But the three, every half-hour (10:00, 10:29, 11:xx) only wastes bandwidth. This is a forum of volunteers, no one is paid to "hop to" as soon as a new question goes up. The forum is also world-wide, which means the guy with the info you need may very well have just gone to bed. Please don't expect any response in less than 24 hours, and please don't think that re-posting the same question every 30 minutes will result in better or faster results. If you have a truely urgent (production is down) problem, you need to open an SR with Oracle Support. There, you are paying for timely, around the clock response.

Database Import Error in Oracle 8i

Hi Friends,
I am using oracle 8i with Windows 2000 Pro SP4. I have a database dump file and i need to import the same using oracle 8i. I am getting the following errors.
imp system/manager file=sap30.dmp buffer=60000
the database was exported by SAP not by you.
imp unsuccessfully terminated
Finaly the error message says that export was done using 8.01.07 but iam using oracle 8i (8.1.5). Pl help me to import the database.
Thanks in advance
Mahendiran.A

dump file created in 11g database can't be imported in lower 8i version.
Restrictions When Using Different Releases of Export and Import
The following restrictions apply when you are using different releases of Export and Import:
Export dump files can be read only by the Import utility because they are stored in a special binary format.
Any export dump file can be imported into a later release of the Oracle database.
The Import utility cannot read export dump files created by the Export utility of a later maintenance release. For example, a release 9.2 export dump file cannot be imported by a release 9.0.1 Import utility.
Whenever a lower version of the Export utility runs with a later release of the Oracle database, categories of database objects that did not exist in the earlier release are excluded from the export.
Export files generated by Oracle9i Export, either direct path or conventional path, are incompatible with earlier releases of Import and can be imported only with Oracle9i Import. When backward compatibility is an issue, use the earlier release or version of the Export utility against the Oracle9i database.
Thanks
Kuljeet Pal Singh
Edited by: Kuljeet Pal Singh on Mar 19, 2012 7:43 PM

Oracle DMP file import Error

Dear all,
i have file of file.dmp and want to import to my database on oracle, here i have user but when i am importing my file i get the bellow error
imp file=file.dat touser=user_one log=logfile.LOG data_only=Y
no i get the eror of :
IMP-00037: Character set marker unknown
IMP-00000: Import terminated unsuccessfully
i have my user and my user heve the rights of ...
PRIVILEGE
CREATE CLUSTER
CREATE INDEXTYPE
CREATE MATERIALIZED VIEW
CREATE OPERATOR
CREATE PROCEDURE
CREATE SEQUENCE
CREATE SESSION
CREATE SYNONYM
CREATE TABLE
CREATE TRIGGER
CREATE TYPE
Where i have done mistak on my importing proccess
regards

HI,
Did you transfer the file in binary mode?
/*(IMP-00037: Character set marker unknown
*Cause: The export file is corrupted.
*Action: Try to obtain an uncorrupted version of the export file.
If the export file is not corrupted, report this as an Import
internal error and submit the export file to customer support.*/
Or please check link: Oracle Tution and Other Stuff: Error - IMP-00037: Character set marker unknown / IMP-00000: Import terminated unsuccessf…
forms: https://forums.oracle.com/message/734478
Thank you

Import error no. 2

i run this import command at dos prompt:
c:\imp system/system file=c:\x.dmp full=y
i got this error :
IMP-00017 : following statement failed with oracle error 4068: "BEGIN SYS.DBMS_REPCAT_MIG_PRE_IMPORT; END;"
ORA-04068 : existing state packages has been discarded
ORA-0463: package body "SYS.DBMS_REPCAT_MIG_INTERNAL" has errors
ORA-06508 : PL/SQL could not find program unit being called
ORA-06512 : at "SYS.DBMS_REPCAT_MIG", line 95
ORA-65512 : at line 1
IMP-00000 : imp. terminated uncuccessful
how to solve this?

the DirectoryId issue is outside of COBRAS power to do anything about - if there's no directory Id being put into the database by the SQLSyncSvr process than any tool that uses it (DiRT, GSM, COBRAS, BulkDelete etc...) cannot act on the user - that means they are not propelry/fully created in AD. so you will need to solve that problem seperately (almost always a permissions/configuration issue in Unity - the tools have no bearing on this and never, ever connect directly to AD for any operation - it's all done through Unity services). Always start by looking in the SQLSyncSvrxxx log found in the commserver logs folder - SQLSyncSvr never logs errors in the event log so far as I know.
The other errors there look like time/date format issues - I'm guessing based on the text of the output that the locale is causing issues - if you want to send the backup MDB file to me (no messages, just the directory backup MDB file) I can run some tests in house - I'll need to know details about what you're restoring to (version and locales installed) and I can test it in debug mode in the lab here to see if I can run that down at any rate.
you can ping me off line at lindborg at cisco dot com.

New import error

I've attempted to re-compile my objects and now there is a new error:
IMP-00017: following statement failed with ORACLE error 29855:
"CREATE INDEX "CITIES" ON "CITIES" ("LOCATION" ) INDEXTYPE IS "MDSYS"."SPAT"
"IAL_INDEX""
IMP-00003: ORACLE error 29855 encountered
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13203: failed to read USER_SDO_GEOM_METADATA table
ORA-13203: failed to read USER_SDO_GEOM_METADATA table
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_9I", line 7
ORA-06512: at line 1
Again, the demo mvdemo.dmp is an 8i exp and I'm attempting to import it into user scott in 9i.
P.

Hello. Thanks for the response.
The import statement is:
imp system/manager fromuser=scott touser=scott log=c:\tmp\log.txt file=c:\tmp\mvdemo.dmp
I have user_sdo_index_metadata (priv= update, select,delete, insert) prior to importing it is empty.
Pete

Export and import errors

I was trying to import dmp to a database from user1 to user1 using imp,but I got following errors.
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "R_TASKSCHEDULE_SCHEDULE" ADD CONSTRAINT "F1R_TASKSCHEDULE_S" F"
"OREIGN KEY ("FK_TASKSCHEDULE_ID") REFERENCES "NC_TASKSCHEDULE" ("PK_TASKSCH"
"EDULE_ID") ENABLE NOVALIDATE"
table or view not exist
so ,I export the indexfile of the DMP using imp test/pwd@cc file=xxx.dmp indexfile=xxx.txt log=imp.log rows=n
and see lots of table definition except tables with error notification such as R_TASKSCHEDULE_SCHEDULE
I got following questions:
1.why it's the first step to ALTER TABLE R_TASKSCHEDULE_SCHEDULE?instead of CREATE TABLE?
2.I can see lots of REM "create table" section,except the tables with error information
but the tables with error information did exist in the source database.but where are the DDL of error tables,there are only the ALTER TABLE in the indexfile
my environment source db:ora11.2.0.1+win2008, dest:ora11.2.0.1+linux
export by exp version 10.2.0.1
import by imp version 11.2.0.1
my exp and imp scripts
exp 123/pwd@cc file=xxx.dmp log=xxxx.log
imp 123/pwd@cc file=xxx fromuser=123 touser=123 log=xxx.log
-EOF-
thanks .....
Edited by: gunsnroses_xjapan on Jun 1, 2011 9:42 AM
Edited by: gunsnroses_xjapan on Jun 1, 2011 9:44 AM
Edited by: gunsnroses_xjapan on Jun 1, 2011 9:48 AM

imp log
EXPORT:V10.02.01
. . importing table "CMCAKEYS"imported 8 rows
. . importing table "CMCAPACITY"imported 3 rows
. . importing table "CMCAPROPS"imported 1 rows
. . importing table "CMCLASSES"imported 177 rows
. . importing table "CMCRYPTOKEYS"imported 9 rows
. . importing table "CMDATA"imported 1 rows
. . importing table "CMDATAUPGRADE"imported 8 rows
. . importing table "CMGUIDS_BASE"imported 1 rows
. . importing table "CMLOCALES"imported 103 rows
. . importing table "CMOBJECTS"imported 1328 rows
. . importing table "CMOBJNAMES_BASE"imported 11063 rows
. . importing table "CMOBJPROPS1"imported 118 rows
. . importing table "CMOBJPROPS10"imported 750 rows
. . importing table "CMOBJPROPS11"imported 10 rows
. . importing table "CMOBJPROPS13"imported 32 rows
. . importing table "CMOBJPROPS14"imported 494 rows
. . importing table "CMOBJPROPS15"imported 3 rows
. . importing table "CMOBJPROPS16"imported 15 rows
. . importing table "CMOBJPROPS17"imported 77 rows
. . importing table "CMOBJPROPS18"imported 313 rows
. . importing table "CMOBJPROPS2"imported 3 rows
. . importing table "CMOBJPROPS20"imported 351 rows
. . importing table "CMOBJPROPS23"imported 3 rows
. . importing table "CMOBJPROPS25"imported 4 rows
. . importing table "CMOBJPROPS26"imported 477 rows
. . importing table "CMOBJPROPS30"imported 63 rows
. . importing table "CMOBJPROPS31"imported 14 rows
. . importing table "CMOBJPROPS33"imported 68 rows
. . importing table "CMOBJPROPS36"imported 4 rows
. . importing table "CMOBJPROPS37"imported 122 rows
. . importing table "CMOBJPROPS38"imported 4 rows
. . importing table "CMOBJPROPS39"imported 14 rows
. . importing table "CMOBJPROPS3_BASE"imported 1431 rows
. . importing table "CMOBJPROPS4"imported 7 rows
. . importing table "CMOBJPROPS44"imported 3 rows
. . importing table "CMOBJPROPS48"imported 8 rows
. . importing table "CMOBJPROPS5"imported 39 rows
. . importing table "CMOBJPROPS50"imported 1 rows
. . importing table "CMOBJPROPS51"imported 528 rows
. . importing table "CMOBJPROPS52"imported 10 rows
. . importing table "CMOBJPROPS54"imported 69 rows
. . importing table "CMOBJPROPS55"imported 1230 rows
. . importing table "CMOBJPROPS58"imported 4 rows
. . importing table "CMOBJPROPS59"imported 2 rows
. . importing table "CMOBJPROPS6"imported 266 rows
. . importing table "CMOBJPROPS61"imported 1 rows
. . importing table "CMOBJPROPS62"imported 280 rows
. . importing table "CMOBJPROPS65"imported 1 rows
. . importing table "CMOBJPROPS66"imported 174 rows
. . importing table "CMOBJPROPS67"imported 8 rows
. . importing table "CMOBJPROPS7"imported 459 rows
. . importing table "CMOBJPROPS9"imported 1 rows
. . importing table "CMPOLICIES"imported 1328 rows
. . importing table "CMPROPERTIES"imported 40 rows
. . importing table "CMREFNOORD1"imported 508 rows
. . importing table "CMREFNOORD2"imported 823 rows
. . importing table "CMREFORD1"imported 168 rows
. . importing table "CMSTOREIDS"imported 1328 rows
. . importing table "CMSYSPROPS"imported 2 rows
. . importing table "CMVIEWED"imported 1230 rows
. . importing table "NC_CONFIGURATION"imported 6 rows
. . importing table "NC_CTMAP"imported 46 rows
. . importing table "NC_DB_VERSION"imported 1 rows
. . importing table "NC_JMSQUEUE"imported 1 rows
. . importing table "NC_METRICS"imported 28 rows
. . importing table "NC_OBJECTID"imported 1 rows
. . importing table "NC_PERMISSION"imported 5 rows
. . importing table "NC_SDS_INSTANCE"imported 1 rows
. . importing table "NC_TASK_ANCESTOR_STOREIDS"imported 9 rows
. . importing table "NC_TASK_HISTORY_DETAIL"imported 0 rows
. . importing table "NC_TASK_QUEUE"imported 3 rows
. . importing table "NC_TSE_STATE_MAP"imported 3 rows
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "R_TASKSCHEDULE_SCHEDULE" ADD CONSTRAINT "F1R_TASKSCHEDULE_S" F"
"OREIGN KEY ("FK_TASKSCHEDULE_ID") REFERENCES "NC_TASKSCHEDULE" ("PK_TASKSCH"
"EDULE_ID") ENABLE NOVALIDATE"
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "R_TASKSCHEDULE_SCHEDULE" ADD CONSTRAINT "F2R_TASKSCHEDULE_S" F"
"OREIGN KEY ("FK_SCHEDULE_ID") REFERENCES "NC_SCHEDULE" ("PK_SCHEDULE_ID") E"
"NABLE NOVALIDATE"
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "R_MSGSTRUCT_RECIPIENT_DELIVINF" ADD CONSTRAINT "F1R_MSGSTRUCT_"
"RECI" FOREIGN KEY ("FK_MESSAGESTRUCT_ID") REFERENCES "NC_MESSAGESTRUCT" ("P"
"K_MS_ID") ENABLE NOVALIDATE"
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "R_MSGSTRUCT_RECIPIENT_DELIVINF" ADD CONSTRAINT "F3R_MSGSTRUCT_"
"RECI" FOREIGN KEY ("FK_RECIPIENT_ID") REFERENCES "NC_RECIPIENT" ("PK_RECIPI"
"ENT_ID") ENABLE NOVALIDATE"
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "R_MESSAGESTRUCT_TASK" ADD CONSTRAINT "F1R_MESSAGESTRUCT_" FORE"
"IGN KEY ("FK_MESSAGESTRUCT_ID") REFERENCES "NC_MESSAGESTRUCT" ("PK_MS_ID") "
"ENABLE NOVALIDATE"
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "R_MESSAGESTRUCT_TASK" ADD CONSTRAINT "F2R_MESSAGESTRUCT_" FORE"
"IGN KEY ("FK_TASK_ID") REFERENCES "NC_TASK" ("PK_TASK_ID") ENABLE NOVALIDAT"
"E"
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "NC_TASKSCHEDULE" ADD CONSTRAINT "F1N_TASKSCHEDULE" FOREIGN KEY"
" ("FK_TASK_ID") REFERENCES "NC_TASK" ("PK_TASK_ID") ENABLE NOVALIDATE"
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "NC_MESSAGELINE_ELEMENT" ADD CONSTRAINT "F1N_MESSAGELINE_EL" FO"
"REIGN KEY ("LINE_NO", "FK_MESSAGESTRUCT_ID") REFERENCES "NC_MESSAGELINE" (""
"LINE_NO", "FK_MESSAGESTRUCT_ID") ENABLE NOVALIDATE"
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "NC_MESSAGELINE" ADD CONSTRAINT "F1N_MESSAGELINE" FOREIGN KEY ("
""FK_MESSAGESTRUCT_ID") REFERENCES "NC_MESSAGESTRUCT" ("PK_MS_ID") ENABLE NO"
"VALIDATE"
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
about to enable the constraints
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "R_TASKSCHEDULE_SCHEDULE" ENABLE CONSTRAINT "F1R_TASKSCHEDULE_S"
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "R_TASKSCHEDULE_SCHEDULE" ENABLE CONSTRAINT "F2R_TASKSCHEDULE_S"
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "R_MSGSTRUCT_RECIPIENT_DELIVINF" ENABLE CONSTRAINT "F1R_MSGSTRU"
"CT_RECI""
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "R_MSGSTRUCT_RECIPIENT_DELIVINF" ENABLE CONSTRAINT "F3R_MSGSTRU"
"CT_RECI""
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "R_MESSAGESTRUCT_TASK" ENABLE CONSTRAINT "F1R_MESSAGESTRUCT_""
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "R_MESSAGESTRUCT_TASK" ENABLE CONSTRAINT "F2R_MESSAGESTRUCT_""
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "NC_TASKSCHEDULE" ENABLE CONSTRAINT "F1N_TASKSCHEDULE""
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "NC_MESSAGELINE_ELEMENT" ENABLE CONSTRAINT "F1N_MESSAGELINE_EL""
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942
"ALTER TABLE "NC_MESSAGELINE" ENABLE CONSTRAINT "F1N_MESSAGELINE""
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
import successful,but warnings encountered

Upgrading Repository - import error

I've got Oracle Repository 4.0.12.100.2, and I'm upgrading to the latest release. The upgrade utility in RAU is trying to run IMP and stopping on an import error. The error flashes by so fast I can't see what the problem might be. and it doesn't seem to be logging the output from IMP. Is there any way that I can make it use the LOGFILE parameter, or at least do a pause before closing the window?
Or if you have an idea what is wrong - that works for me too.

Never mind - with some information from Oracle Support I found the log of the failed import. Then with the error message, I found out that I was using the import for Oracle 10gR2, but the database on which the repository is installed is 10gR1. So I needed the import for 10gR1 - which I didn't have and you can't download it anymore. Some scrounging around the office finally turned up an installation disk. I installed 10gR1 client - reconfigured RAU to use it - and the upgrade worked.
Guess I'll need to upgrade the database to 10gR2 some day in the near future.

Import error IMP-00058

Similar Messages

Maybe you are looking for