IMPORT ERROR Number 2

i run this import command at dos prompt:
c:\imp system/system file=c:\x.dmp full=y
i got this error :
IMP-00017 : following statement failed with oracle error 4068: "BEGIN SYS.DBMS_REPCAT_MIG_PRE_IMPORT; END;"
ORA-04068 : existing state packages has been discarded
ORA-0463: package body "SYS.DBMS_REPCAT_MIG_INTERNAL" has errors
ORA-06508 : PL/SQL could not find program unit being called
ORA-06512 : at "SYS.DBMS_REPCAT_MIG", line 95
ORA-65512 : at line 1
IMP-00000 : imp. terminated uncuccessful
how to solve this?

Just a word of advice to a newbie...
You started all new threads on this same problem at (all times are my local)
10:00
10:29
11:02
11:04
11:04
11:11
Ok, some of those around 11:02 - 11:04 could be due to network problems, we've all had that experience. But the three, every half-hour (10:00, 10:29, 11:xx) only wastes bandwidth. This is a forum of volunteers, no one is paid to "hop to" as soon as a new question goes up. The forum is also world-wide, which means the guy with the info you need may very well have just gone to bed. Please don't expect any response in less than 24 hours, and please don't think that re-posting the same question every 30 minutes will result in better or faster results. If you have a truely urgent (production is down) problem, you need to open an SR with Oracle Support. There, you are paying for timely, around the clock response.

Similar Messages

Import error as error number is -12018

Hi All,
While importing a project getting an error as:
Import Error: com.fatwire.cs.core.realtime.DataException: com.fatwire.assetapi.common.AssetAccessException: Error met whiling saving assets [AttrTypes:1415189814137] and the error number is -12018
https://docs.oracle.com/cd/E29542_01/apirefs.1111/e39371/MISC/errno.html shows error related to Missing publication. No clue..

-12018 means " Missing publication."
Since the DemoSite is a new site that doesn't exist in the CSDT target environment, I would import the site first, e.g.
java com.fatwire.csdt.client.main.CSDT http://hostOrIP:8080/cs/ContentServer username=fwadmin password=xceladmin resources=@SITE:DemoSite cmd=import
NOTE: Make sure the site was exported to your datastore before import.
Then, import assets of this site:
java com.fatwire.csdt.client.main.CSDT http://hostOrIP:8080/cs/ContentServer username=fwadmin password=xceladmin resources=@ALL_ASSETS:*;@ALL_NONASSETS:* fromSites=DemoSite cmd=import
Note that the parameter is fromSites, not fromSite.
See if this helps.
Thanks,
Yu-Chun

Error number 207 error type SPECIFIC_CODE IMPORT ABAP phase error when install database instance

IMPORT ABAP phase error when install database instance
Error number 207 error type SPECIFIC_CODE.
In phase "Import ABAP" the installation halts with error. Can anyone please tell me what error should I search for and (possibly) what is the solution?
Thanks in advance
synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false)
syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false, ISyProgressObserver* )
synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="IboSap-PC\nspadm" does not exist.
Failed action: with parameters
Error number 207 error type SPECIFIC_CODE

It is not easy, really , it has taken many hours and at the End I got the problems,.
so I have decided to pay 20 $ every month, and I can get an access IDES to SAP, ERP, ABAP.
without any problem. In ABAP, I have only Sflight ,SBOOK etc. but MARA, and others tables, dont exist, .
I know, some students have not enough money, so what can we do? every one get problem with installaion and others after installaion, with server, 3 days work, and NSP becomes RED. Yellow, etc.
anyway. thank you for all.
Best Regards.

Error importing CSElement Error Number -12075

While import I am getting this error. I did not find any explanation for this error anywhere.There is absolutely no documentation available anywhere how do I find out the cause of this error. Any pointer to where to look this error number OR what could be causing this to happen. I have removed just one line from CSElement jsp file.
Import Error: com.fatwire.cs.core.realtime.DataException: com.fatwire.assetapi.common.AssetAccessException: Error met whiling saving assets [CSElement:1374063441436] and the error number is -12075

Hi sameerbo,
When publishing, the CSElement is updated if it has the same id. If you have a CSElement with the same name but another id on the target then you'll get an error.
If you're using CSDT to import, then it goes by the fw_ui column instead of the id.
Errno -12075 means "An asset of this type already exists using this name." It's documented in the tag reference guide, under Errors -> errno. See: errdetail Error Values
Kind regards,
Stephan.

"Import Error" at report output.

Hi All,
I need help for a problem that I am frequently encountering.
After I execute a report, an information dialog is thrown on the screen which says:
"Import Error: No result found for key RU 0047621000029"
After pressing the tick button on the dialog, the same dialog pops up again, but with the number on it incremented once. This goes on till the RU0029 in the message becomes RU0119. (In effect, I have to press the tick button nearly 90 times). After all this, the output comes.
This has come so far for 2 reports. The common elements in both the reports so far is only an e-mail code and a selection-screen.
Ravi.

Hi,
Check whether contents in below links helps you to resolve the issue.
Link1
Link2
Thanks,
Raghavendra

Import Error OVM Template Via VM Manager

I'm getting this import error message
Register an empty virtual machine
register the virtual machine genernal information
get the virtual machine detail information...
Invalid virtual machine type(HVM/PVM).
When tried to import OVM_EL5U5_X86_64_PVM_10GB
and OVM_EL5U2_X86_64_ORACLE11G_PVM
This was only my initial import on resource.
Can anyone help me on this?? thanks

Hi bach,
I can't follow you there... here's the extracted content of "OVM_EL5U2_X86_64_ORACLE11G_PVM.tgz"
oracle11g_x86_64_asm.img
README
System.img
vm.cfg
vm.cfg.orig
here's the README
OEL 5.2 X86_64 Oracle 11g image for PVM guests
Version 2.2
Released on Feb 02 2009
Changelog:
* Mon Feb 02 2009
- Bumped the release number from 2.1.2 to 2.2 .
- Replace system image with the image based on OEL 5.2 JeOS.
- Upgraded kernel to kernel-xen-2.6.18-92.1.22.0.1.el5, ocfs2 and oracleasm
were upgraded correspondingly.
- Added strace, gdb packages.
- Upgraded oracle-validated to 1.0.0-16.el5
- Moved Oracle home from LVM2 logical volume to regular ext3 partition.
how does this relate with your answer ?

Generic import error - Lion - CS5.5 - Will not import

Hi. I just upgraded to cs5.5 with Lion and now a number of my previous cs4 projects will not load various flavors of video. One major problem I discovered was that after installing Lion, both of my Quicktime folders in the user and system library were missing (the system library is hidden in Lion by default, so I revealed it). These folders hold various quictime components, which I recreated from a backup. Now Quictime will play all of the video, but PPro responds with a generic import error. I have included a number of screen shots below showing the video file and library info. (I wish bridge would interogate the files and provide this information, but I use video spec). Any assistance would be greatly appreciated. I have a number of clients waiting for resolution. Thank you. -Jeff

Well, I solved the problem but I had to de-install Lion to do it, so I will not close out the thread until I update the post after the next Lion attempt.
Here are the steps I took.
Clean Install of Snow Leopard from the DVD. This erased everything on the HD.
Update all system software.
Download and install Quicktime 7.6.6
Register Quicktime Pro (Fortunately I had the old receipt) This drops in the AppleMPEG2Codec.component
Copy over the AppleHDVCodec.component to the user library.
Install CS5.5
Big smile.
One important change is that I did NOT install Final Cut this time.
I just copied in the missing AppleHDVCodec.component to the library.
I had this file in the correct folder post install of Lion, but for some reason PPro would not recognize it.
My best guess is some other file (maybe a framework file) in the library was corrupted or altered during the Lion Installation.
I also have not copied over all of the other codec.compents yet. I plan to drop these in as needed if new import errors occur.
Below are the screen shots of the new librarys.

FDM Import Error in import file Details: Permission denied

Hi,
i am trying to run the FDM Import but it gives an error with the error number 70 'Permission denied'.
Earlier it was working fine, now it is acting crazy,
please assist guys....
find the log file below:
** Begin FDM Runtime Error Log Entry [2011-03-21 09:56:07] **
ERROR:
Code............................................. 70
Description...................................... Permission denied
Procedure........................................ clsArchiveMgr.fArchiveSupercededDelete
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 15284
IDENTIFICATION:
User............................................. admin
Computer Name.................................... GITSHYPT01
App Name......................................... AWRFinCo
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HYPTDB
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... SAMPLE
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCAT
Category ID...................................... 12
Period........................................... Feb - 2011
Period ID........................................ 2/28/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-03-21 09:56:07] **
ERROR:
Code............................................. 70
Description...................................... Permission denied
Procedure........................................ clsArchiveMgr.fArchiveSupercededFlag
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 15284
IDENTIFICATION:
User............................................. admin
Computer Name.................................... GITSHYPT01
App Name......................................... AWRFinCo
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HYPTDB
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... SAMPLE
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCAT
Category ID...................................... 12
Period........................................... Feb - 2011
Period ID........................................ 2/28/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-03-21 09:56:07] **
ERROR:
Code............................................. 70
Description...................................... Permission denied
Procedure........................................ clsImpProcessMgr.fClearData
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 15284
IDENTIFICATION:
User............................................. admin
Computer Name.................................... GITSHYPT01
App Name......................................... AWRFinCo
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HYPTDB
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... SAMPLE
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCAT
Category ID...................................... 12
Period........................................... Feb - 2011
Period ID........................................ 2/28/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-03-21 09:56:07] **
ERROR:
Code............................................. 70
Description...................................... Permission denied
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 15284
IDENTIFICATION:
User............................................. admin
Computer Name.................................... GITSHYPT01
App Name......................................... AWRFinCo
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... HYPTDB
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... SAMPLE
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... WLCAT
Category ID...................................... 12
Period........................................... Feb - 2011
Period ID........................................ 2/28/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False

The FDM Service account does not have proper permission to the FDM application folder. Make sure that the applicaiton path is specified in UNC format and that the FDM Service account has full read\write to the application share. So the app path should be something like \\servername\fdmdata\<appname> and the FDM service account shoudl have full control to the FDMDATA folder.

ORA-06502: PL/SQL: numeric or value error:. number precision too large, ORA-06502: PL/SQL: numeric or value error:. number precision too large

I have hit with above error and the code did run successfully before the minor change in the portion I have bolded. Appreciate your comment & help.
Attached with the code:
CREATE TABLE RPT1120B_CHANNEL_new
(SUBSCRIBER_NO NUMBER (9),
FP_CHANNEL VARCHAR2(255),
FP_DATE DATE,
FP_DYNASTY CHAR(1),
FP_MOVIE CHAR(1),
FP_FUN CHAR(1),
FP_LEARNING CHAR(1),
FP_NEWS CHAR(1),
FP_SPORTS CHAR(1),
FP_VARIETY CHAR(1),
FP_EMPEROR CHAR(1),
FP_SX1 CHAR(1),
FP_CEL CHAR(1),
LP_CHANNEL VARCHAR2(255),
LP_DATE DATE,
LP_DYNASTY CHAR(1),
LP_MOVIE CHAR(1),
LP_FUN CHAR(1),
LP_LEARNING CHAR(1),
LP_NEWS CHAR(1),
LP_SPORTS CHAR(1),
LP_VARIETY CHAR(1),
LP_EMPEROR CHAR(1),
LP_SX1 CHAR(1),
LP_CEL CHAR(1));
--truncate table RPT1120B_CHANNEL;
create or replace PROCEDURE sp_rpt1120b_new
AS
FP_CHANNEL VARCHAR2(255);
FP_DATE DATE;
LP_CHANNEL VARCHAR2(255);
LP_DATE DATE;
REC_COUNT NUMBER(3);
TYPE REC_SA IS RECORD
(AGREEMENT_NO NUMBER (9));
TYPE REC_CHANNEL IS RECORD
(CHANNEL VARCHAR2(3),
AGREEMENT_NO NUMBER (9));
BEGIN
FOR REC_SA IN (SELECT DISTINCT SUBSCRIBER_NO FROM RPT1120B_T1_new) LOOP
 FP_CHANNEL := '';
 LP_CHANNEL := '';
 REC_COUNT := 0;
 FP_DATE := '';
 LP_DATE := '';
 FOR REC_CHANNEL IN (SELECT distinct decode(SOC,
 29990,'N',
 29991,'V',
 29993,'M',
 29988,'F',
 29989,'L',
 29992,'S',
 29994,'D',
 29995,'E',
 30277,'C',
 30293,'C',
 30319,'C',
 30359,'C',
 30276,'X',
 30331,'X',
 30299,'X',
 30380,'X')
 AS CHANNEL,SA.EFFECTIVE_DATE as soc_sts_date
 FROM SERVICE_AGREEMENT SA
 WHERE SA.SOC in ( 29990,
 29991,
 29993,
 29988,
 29989,
 29992,
 29994,
 29995,
 30277,
 30293,
 30319,
 30359,
 30276,
 30331,
 30299,
 30380) AND
 SA.AGREEMENT_NO = REC_SA.SUBSCRIBER_NO AND
 TRUNC(SA.EFFECTIVE_DATE) <> TRUNC(NVL(SA.EXPIRATION_DATE,SYSDATE)) AND
 SA.EFFECTIVE_DATE = (SELECT MIN(SA1.EFFECTIVE_DATE) FROM SERVICE_AGREEMENT SA1
 WHERE SA1.AGREEMENT_NO = SA.AGREEMENT_NO AND
 sa1.soc in (
29990,
 29991,
 29993,
 29988,
 29989,
 29992,
 29994,
 29995,
 30277,
 30293,
 30319,
 30359,
 30276,
 30331,
 30299,
 30380))
 order by DECODE(channel,'D',1,'M',2,'E',3,'C',4,'X',5,'F',6,'L',7,'N',8,'S',9,'V',10)) LOOP
 REC_COUNT := REC_COUNT + 1;
 if REC_COUNT < 254 then
 FP_CHANNEL := FP_CHANNEL || REC_CHANNEL.CHANNEL;
 end if;
 FP_DATE := REC_CHANNEL.soc_sts_date;
 END LOOP;
 REC_COUNT := 0;
 FOR REC_CHANNEL IN (SELECT distinct decode(sa.SOC,
 29990,'N',
 29991,'V',
 29993,'M',
 29988,'F',
 29989,'L',
 29992,'S',
 29994,'D',
 29995,'E',
 30277,'C',
 30293,'C',
 30319,'C',
 30359,'C',
 30276,'X',
 30331,'X',
 30299,'X',
 30380,'X')
 AS CHANNEL,SA.soc_status_date as soc_sts_date
 FROM SERVICE_AGREEMENT SA,
 (SELECT MAX(SA1.soc_status_DATE) as soc_date, agreement_no, soc
 FROM SERVICE_AGREEMENT SA1
 WHERE soc in( 29990,
 29991,
 29993,
 29988,
 29989,
 29992,
 29994,
 29995,
 30277,
 30293,
 30319,
 30359,
 30276,
 30331,
 30299,
 30380)
 GROUP BY agreement_no, soc) sa1
 WHERE SA.SOC in ( 29990,
 29991,
 29993,
 29988,
 29989,
 29992,
 29994,
 29995,
 30277,
 30293,
 30319,
 30359,
 30276,
 30331,
 30299,
 30380) AND
 SA.soc_status_date = sa1.soc_date AND
 TRUNC(SA.SOC_STATUS_DATE) <> TRUNC(NVL(SA.EXPIRATION_DATE,SYSDATE)) AND
 SA.SOC_STATUS = (SELECT MIN(SA2.SOC_STATUS) FROM SERVICE_AGREEMENT SA2
 WHERE SA2.AGREEMENT_NO = SA.AGREEMENT_NO AND sa2.soc = sa.soc
 and SA2.soc_status_date = SA.soc_status_date)
 order by DECODE(channel,'D',1,'M',2,'E',3,'C',4,'X',5,'F',6,'L',7,'N',8,'S',9,'V',10)) LOOP
 REC_COUNT := REC_COUNT + 1;
 if REC_COUNT < 254 then
 LP_CHANNEL := LP_CHANNEL || REC_CHANNEL.CHANNEL;
 end if;
 LP_DATE := REC_CHANNEL.soc_sts_date;
 END LOOP;
 INSERT INTO RPT1120B_CHANNEL_new values
 (REC_SA.SUBSCRIBER_NO,
 substr(FP_CHANNEL,1 essageID=1196758, I have hit with above error and the code did run successfully before the minor change in the portion I have bolded. Appreciate your comment & help.
Attached with the code:
CREATE TABLE RPT1120B_CHANNEL_new
(SUBSCRIBER_NO NUMBER (9),
FP_CHANNEL VARCHAR2(255),
FP_DATE DATE,
FP_DYNASTY CHAR(1),
FP_MOVIE CHAR(1),
FP_FUN CHAR(1),
FP_LEARNING CHAR(1),
FP_NEWS CHAR(1),
FP_SPORTS CHAR(1),
FP_VARIETY CHAR(1),
FP_EMPEROR CHAR(1),
FP_SX1 CHAR(1),
FP_CEL CHAR(1),
LP_CHANNEL VARCHAR2(255),
LP_DATE DATE,
LP_DYNASTY CHAR(1),
LP_MOVIE CHAR(1),
LP_FUN CHAR(1),
LP_LEARNING CHAR(1),
LP_NEWS CHAR(1),
LP_SPORTS CHAR(1),
LP_VARIETY CHAR(1),
LP_EMPEROR CHAR(1),
LP_SX1 CHAR(1),
LP_CEL CHAR(1));
--truncate table RPT1120B_CHANNEL;
create or replace PROCEDURE sp_rpt1120b_new
AS
FP_CHANNEL VARCHAR2(255);
FP_DATE DATE;
LP_CHANNEL VARCHAR2(255);
LP_DATE DATE;
REC_COUNT NUMBER(3);
TYPE REC_SA IS RECORD
(AGREEMENT_NO NUMBER (9));
TYPE REC_CHANNEL IS RECORD
(CHANNEL VARCHAR2(3),
AGREEMENT_NO NUMBER (9));
BEGIN
FOR REC_SA IN (SELECT DISTINCT SUBSCRIBER_NO FROM RPT1120B_T1_new) LOOP
 FP_CHANNEL := '';
 LP_CHANNEL := '';
 REC_COUNT := 0;
 FP_DATE := '';
 LP_DATE := '';
 FOR REC_CHANNEL IN (SELECT distinct decode(SOC,
 29990,'N',
 29991,'V',
 29993,'M',
 29988,'F',
 29989,'L',
 29992,'S',

The error message has an important hint: "number precision too large"
Change REC_COUNT's type from NUMBER(3) to NUMBER and see what happens.

Premiere CC v7.2 "generic import error" Sony xdcam 422 50mb / PDW F800

I'm receiving a "generic import error" when attempting to import Sony XDCAM footage in to Premiere Pro CC v7.2.0 (PC). The footage is in the original file structure transferred from a Sony XDCAM disc. The format is 1920x1080p, 29.97, 50mbps mpeg-2 long GOP (CBR). Shot with a Sony PDW F800 camera. It opens and plays fine with the Sony XDCAM viewer. I've tried importing the entire folder structure from PP media browser with no success. Not getting any thumbnails or previews from the files. PP will import the proxy files (mxf/mp4) but not the mpeg-2 HD media. Any insight on this issue would be greatly appreciated.

Hey Wil, got this figured out quite painlessly considering the train wreck that it was to begin with. The material consisted of 4 mxf discs all with sequentially numbered duplicate filenames from disc to disc… cameramen love to torture editors. Simply renaming the clips using the OS would not work so here’s what I did. Starting with Bridge I identified the HD material apart from the 8 audio files and 1 proxy file per clip by performing a file search using the letter (V), only the HD video material has a (V) in the filename. Next I copied only the video files to a work folder as to not alter the original disc structure, I did this for each mxf disc. Next critical step was to turn off all metadata logging in Bridge except the filename metadata, then I used the batch renaming function with 3 criteria: 1-seed each filename with the disc number, 2- retain original clip name, and 3-rename extension to mpg. I did this for each disc. Next step was to batch encode using AME. I processed each disc using the same codec as the original source material, MXF/OP1a, Sony XDCAM 50mb with smart rendering codec enabled. My system ripped through this process at amazing speed, it retained the original source clip time code and the quality appears to be unaltered from the original. The reason for turning off the metadata logging in Bridge was to strip off the mxf reference, AME would not process the files by simply renaming them using the OS. Total time to clean-up train wreck; 40 minutes.
BTW: I did not need the associated audio from these clips otherwise there would have been an extra step involved using premiere’s nesting feature as you had mentioned.
Happy Holidays.

VBScript error number conversion?

Hi,
I have a script returning an error as a large negative number and need to know how to convert it down to the nice small positive number that MSDN shows as the return values.
Thanks!

**Decoding Errors**
-2147220978 style numbers are 32 bit signed integers, convert to hex with calculator.
Windows errors (smallish numbers) and COM HResults (typically, but with exceptions, start with an 8 as in 0x80040154) are defined in WinError.h, except 8007nnnn where you look up the Window error number that it contains.
As a general rule Windows errors are less than 65,535 (0xFFFF). Errors starting 0x80000001 are Component Object Model (COM) HResults. Errors starting 0xC0000001 are NTStatus results. Errors starting 0xD0000001 are also NTStatus
values returned in a HResult.
- **WinError** - Returned from Windows API Calls
- **HResult** - Returned from COM calls
- **NTStatus** - Returned from kernel and some API calls also return when
   encountering a kernel error.
NTStatus errors (typically but not always start with an C as in 0xC0000022) are defined in NTStatus.h.
.h files are the best source because it includes the symbolic name of the error which can give clues such as the source of the error. FormatMessage doesn't give the symbolic name only the description.
You get these files by downloading the Platform SDK (it's gigabytes)
http://www.microsoft.com/en-us/download/details.aspx%3Fid%3D8279&sa=U&ei=w2IrULDDLsHFmAWbmIHoBg&ved=0CBwQFjAA&usg=AFQjCNHZn9-4f2NnuN9o3UWUsOF3wL7HBQ
If you just want the two files I have them on my skydrive so I can reference them anywhere I go.
https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA!121
Note internet errors (12,000 - 12,999) are windows errors but are specified in wininet.h also available above.
There are errors defined in other .h files. But 99% are in the three above.
**Structure of HResults and NTStatus Codes**
The most significant bit in HResults, and the two most significant bits in NTStatus are set on error. Hence Hresults start 8 on error and NTStatus starts C on Error. The next 14 or 15 bits are reserved and some specify the
facility - what area the error is in. This is the third and fourth number when reading hex. EG 0xnn07nnnn - An HResult facility code 7 is a normal Windows' error (returned from a COM program - hence it's returned as a HResult). Facility codes are defined in
Winerror.h for HResults and NTStatus.h for NTStatus codes. They are different.
**To Decode 0x8003nnnn Errors**
HResults with facility code 3 means the HResult contains OLE Structured Storage errors (0x0 to 0xff). These are the same as Dos error codes. These don't seem to be in Windows' header files and the list of codes is at the end of this post.
**To Decode 0x8004nnnn Errors**
HResults with facility code 4 means the HResult contains OLE errors (0x0 to 0x1ff) while the rest of the range (0x200 onwards) is component specific errors so 20e from one component will have a different meaning to 20e from another component.
This is why the source of the error is extra important for errors above 0x80040200.
**To Decode 0x8007nnnn Errors**
HResults with facility code 7 means the HResult contains a Windows' error code. You have to look up the Windows' error code not the HResult.
To decode 0x80070002. The 0x means it's a hexadecimal number, the 8 means error, the first 7 means it a windows error, and the rest of the number, 2, is the actual Windows error.
To look up the error we need it in decimal format. Start Calculator (Start - All Programs - Accessories - Calculator) and choose View menu - Scientific, then View menu - Hex. Enter 2. Then View menu - Decimal. It will say 2.
Start a Command Prompt (Start - All Programs - Accessories - Command Prompt) and type
    net helpmsg 2
and it will say
    The system cannot find the file specified.
or look it up in winerror.h
    // MessageId: ERROR_FILE_NOT_FOUND
    // MessageText:
    // The system cannot find the file specified.
    #define ERROR_FILE_NOT_FOUND             2L
**To Decode 0x8019nnnn Errors**
HResults with facility 0x19 are HTTP errors. Codes under 16,384 (0x4000) are the same as HTTP errors, eg HTTP status 404: The requested URL does not exist on the server is 0x80190194 (0x194 = 404). Codes 16,384 and higher are BITS specific.
**To Decode 0xDnnnnnnn Errors**
HResults starting 0xD are an HResult with a NTStatus value in it. Just cange the lead D to a C and treat as an NTStatus (Hresult = NTStatus OR 10000000).
**Dos Error Codes (for 0x8003nnnn errors)**
Code Message
    01 Invalid function number
    02 File not found
    03 Path not found
    04 Too many open files (no handles left)
    05 Access denied
    06 Invalid handle
    07 Memory control blocks destroyed
    08 Insufficient memory
    09 Invalid memory block address
    0A Invalid environment
    0B Invalid format
    0C Invalid access mode (open mode is invalid)
    0D Invalid data
    0E Reserved
    0F Invalid drive specified
    10 Attempt to remove current directory
    11 Not same device
    12 No more files
    13 Attempt to write on a write-protected diskette
    14 Unknown unit
    15 Drive not ready
    16 Unknown command
    17 CRC error
    18 Bad request structure length
    19 Seek error
    1A Unknown media type
    1B Sector not found
    1C Printer out of paper
    1D Write fault
    1E Read fault
    1F General failure
    20 Sharing violation
    21 Lock violation
    22 Invalid disk change
    23 FCB unavailable
    24 Sharing buffer overflow
    25 Reserved
    26 Unable to complete file operation (DOS 4.x)
    27-31 Reserved
    32 Network request not supported
    33 Remote computer not listening
    34 Duplicate name on network
    35 Network name not found
    36 Network busy
    37 Network device no longer exists
    38 NetBIOS command limit exceeded
    39 Network adapter error
    3A Incorrect network response
    3B Unexpected network error
    3C Incompatible remote adapter
    3D Print queue full
    3E No space for print file
    3F Print file deleted
    40 Network name deleted
    41 Access denied
    42 Network device type incorrect
    43 Network name not found
    44 Network name limit exceeded
    45 NetBIOS session limit exceeded
    46 Temporarily paused
    47 Network request not accepted
    48 Print or disk redirection is paused
    49-4F Reserved
    50 File already exists
    51 Reserved
    52 Cannot make directory entry
    53 Fail on INT 24
    54 Too many redirections
    55 Duplicate redirection
    56 Invalid password
    57 Invalid parameter
    58 Network device fault
    59 Function not supported by network (DOS 4.x)
    5A Required system component not installed (DOS 4.x)
**Facility Codes**
**NTStatus Facilities** **HResults Facilities**
    Common status values
    0x0 Null 0x0
    Debugger 0x1 Rpc 0x1
    Rpc_runtime 0x2 Dispatch 0x2
    Rpc_stubs 0x3 Storage 0x3
    Io_error_code 0x4 Itf 0x4
    Various drivers 0x5-0xf Win32 0x7
    Ntwin32 0x7 Windows 0x8
    Ntsspi 0x9 Sspi 0x9
    Terminal_server 0xa Security 0x9
    Faciltiy_mui_error_code 0xb Control 0xa
    Usb_error_code 0x10 Cert 0xb
    Hid_error_code 0x11 Internet 0xc
    Firewire_error_code 0x12 Mediaserver 0xd
    Cluster_error_code 0x13 Msmq 0xe
    Acpi_error_code 0x14 Setupapi 0xf
    Sxs_error_code 0x15 Scard 0x10
    Transaction 0x19 Complus 0x11
    Commonlog 0x1a Aaf 0x12
    Video 0x1b Urt 0x13
    Filter_manager 0x1c Acs 0x14
    Monitor 0x1d Dplay 0x15
    Graphics_kernel 0x1e Umi 0x16
    Driver_framework 0x20 Sxs 0x17
    Fve_error_code 0x21 Windows_ce 0x18
    Fwp_error_code 0x22 Http 0x19
    Ndis_error_code 0x23 Usermode_commonlog 0x1a
    Hypervisor 0x35 Usermode_filter_manager 0x1f
    Ipsec 0x36 Backgroundcopy 0x20
    Maximum_value 0x37 Configuration 0x21
      State_management 0x22
      Metadirectory 0x23
      Windowsupdate 0x24
      Directoryservice 0x25
      Graphics 0x26
      Shell 0x27
      Tpm_services 0x28
      Tpm_software 0x29
      Pla 0x30
      Fve 0x31
      Fwp 0x32
      Winrm 0x33
      Ndis 0x34
      Usermode_hypervisor 0x35
      Cmi 0x36
      Windows_defender 0x50
David Candy

FDMEE Import error "No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'

Hi,
We are having trouble while importing one ledger 'GERMANY EUR GGAAP'. It works for Dec 2014 but while trying to import data for 2015 it gives an error.
Import error shows " RuntimeError: No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'."
I tried all Knowledge docs from Oracle support but no luck. Please help us resolving this issue as its occurring in our Production system.
I also checked all period settings under Data Management> Setup> Integration Setup > Global Mapping and Source Mapping and they all look correct.
Also its only happening to one ledger rest all ledgers are working fine without any issues.
Thanks

Hi,
there are some Support documents related to this issue.
I would suggest you have a look to them.
Regards

How do I convert an excel (2008) document to Numbers? When I drag the Excel document onto the Numbers icon I get, "Import error. The file format is invalid"

How can I convert an Excel (2008) document to Numbers. When I drag the Excel document onto the Numbers icon I get, "Import error. The file format is invalid.

That extension identifies the most current Excel file format, a format that can be opened by Numbers '09 (and by Numbers '08).
A check with Numbers '09 shows it capable of opening .xlsx files when right-clicked (and Numbers chose as the application to open, when double-clicked (if Numbers has been set as the default application to open this type of file, or when dragged to the Numbers icon in the dock.
I see two possibilities for Numbers inability to open it and the message you receive:
1. The file is not actually an Excel file, and the sender has added the .xlsx extension to the filename manually.
2. The file is an Excel file, but has somehow been corrupted.
Have you tried opening the file with a different application? The open source Office suites, OpenOffice.org, LibreOffice and NeoOffice can also open .xlsx files. If they're unable to open this one, that would point toward the file itself being faulty. You can download these applications from their rspective websites, linked in the names above. All request a donation to support future development, but only Neo requires one to have been made recently, and that only for the current release (which won't be necessary to open .xlsx files).
Regards,
Barry

An internal database error occurred in the Business Data Connectivity Shared Service. SQL Error Number : 229

Recently i upgraded my SharePoint server 2013 to SP1, after the upgrade i received following message in manage database Status page " Databases running in compatibility range, upgrade recommended"
for Business Data Connectivity Database. Then i ran Sharepoint Configuration wizard, which fixed that error on that page but i am getting a error message while accessing BDCApplication page in manage service applications pagein central admin"
An internal database error occurred in the Business Data Connectivity Shared Service. SQL Error Number : 229
Sys Log :
The BDC Service application failed due to a SQL Exception: SQLServer host WSQLD05\DV. The error returned was: 'The EXECUTE permission was denied on the object 'proc_ar_GetAdministrationMetadataCatalogByPartitionId', database 'sp_BusinessDataConnectivity_DV13',
schema 'dbo'.'
I checked the Db role of the service app pool account, it has SPDataAccess permission over the Database. i cant recreate another application without knowing the root cause. I hope i can get better option to troubleshoot the issue.
Thank you

As per the error message, you can at least grant the BDC service application pool account the EXECUTE perimssions on the sp_BusinessDataConnectivity_DV13 database
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course

PO: Error number 3 - Failed Activity: Does Approver Have Authority?

Hi,
I know, this is old known error, but I cannot resolve the problem. Many solution I have read a applied, but some workflows still shows: error number 3.
1) user was notified by this:
Document Manager Failed With Error Number while processing Standard purchase order 50025512
2) error shows this error:
Workflow Errors: XXK_POAP, 116384-269277, 50025512
Failed Activity XXKDoes Approver Have Authority?
Activity Type Function
Error Name 1
Error Message User-Defined Exception
Error Stack Wf_Engine_Util.Function_Call(XXK_PO_WFS3Z.XXK_VERIFY_AUTHORITY, XXK_POAP, 116384-269277, 204044, RUN)
Yes, there are customizations.
3) for errored workflows the debug table shows this:
for example:
FUNCTION = fnd_trn_pipe.get_manager
ACTION = 1|No manager defined
RESPONSIBILITY_ID = 20420
RESP_APPL_ID = 0
eBS 11.5.10.2 runs on Win 2003 server.
Thanks.
Audun
Edited by: Audun on 22.2.2012 12:46

The error that appears is a generic error.
But the activity that is erroring out is "XXKDoes Approver Have Authority" is an customized one..
Can you ask your technical engineer to reivew the events associated with the activity, to troubleshoot further.
If you want to confirm, whether the issue is arising out of oracle code - you can forceload the workflow and then retest the issue.
If it still errors - you can ask "oracle Support" to assist.

IMPORT ERROR Number 2

Similar Messages

Maybe you are looking for