Import/Export Wizard is a bulk operation?

If I use import/export wizard to load data from a file to a table will it do it as a bulk operation and will be minimally logged when using bulk logged recovery mode?
http://technet.microsoft.com/en-us/library/ms191244(v=sql.105).aspx  

Yes. The Import Export wizard creates a SSIS package on the backend which will have default transfer option as below
This is same as BULK INSERT and so it would be minimally logged in case of BULK recovery mode.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Similar Messages

  • Can't start the Import Export Wizard - "No Description Found"

    Microsoft SQL Server Management Studio                             9.00.3042.00
    Microsoft Analysis Services Client Tools                               2005.090.3042.00
    Microsoft Data Access Components (MDAC)                        2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
    Microsoft MSXML                                                               2.6 3.0 5.0 6.0
    Microsoft Internet Explorer                                                   7.0.5730.11
    Microsoft .NET Framework                                                  2.0.50727.42
    Operating System                                                              5.1.2600
    Been trying for ages to get access to the Import/Export wizard. If I install the base SQL 2005 install I can use it, but there's no flat file option, which I need. Once SP1 or SP2 is installed I get the error below. I've tried re-registering the msxmlX.dlls but doesn't change anything.
    I don't have Visio installed, which was another suggested cause.
    This wizard will close because it encountered the following error: (Microsoft SQL Server)
    ===================================
    No description found
    Program Location:
       at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.get_DBProviderInfos()
       at Microsoft.SqlServer.Dts.DtsWizard.DTSWizard.GetDtsDbProviderInfos(WizardInputs wizardInputs)
       at Microsoft.SqlServer.Dts.DtsWizard.DataSourceCombo.PopulateProviders(Boolean fSources, WizardInputs wizardInputs)
       at Microsoft.SqlServer.Dts.DtsWizard.Step1.OnInitializePage(EventArgs e)
       at Microsoft.SqlServer.Management.UI.WizardPage.RaiseEnterPage()
       at Microsoft.SqlServer.Management.UI.WizardForm.NextPage(WizardPage nextPage)
       at Microsoft.SqlServer.Management.UI.WizardForm.Next_Click(Object sender, EventArgs e)

    Let us know if you see this issue in SQL 2014 as well. You can quickly create a SQL Server 2014
    Virtual machine on Windows Azure for your testing.
    http://azure.microsoft.com/en-us/documentation/articles/virtual-machines-provision-sql-server/
    Thanks, Sethu Srinivasan [MSFT] SQL Server http://blogs.msdn.com/sqlagent -------------------------------------------------------------------------------- This posting is provided "AS IS" with no warranties, and confers no rights.
    Please remember to click "Mark as Answer" and "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

  • Attunity connectors for Oracle in Import Export Wizard in SQL Server 2008 R2

    Is there a way we can see the Attunity connectors drivers in the Import/Export Wizard (64 bit) for SQL Server 2008 R2?
    Although I made it work for SSIS, I would need these drivers in the Import/Export wizard so as to automate it for numerous number of tables which I want to migrate.
    Can the Attunity connectors for Oracle be used in the Import/Export wizard? If so please let me know.
    Regards,
    Ashutosh.
    Ashutosh.

    I have 100 tables to migrate. Creating a data flow for each table is tedious and that's why I was looking out for a way to do it through import export wizard so that I don't have to create a separate data source and destination for each table in the Data
    flow Task.
    Is there a way to loop through all tables and transfer data in SSIS without having multiple sources and destinations created for each table? This also involves a bit of transformation as well.
    Regards,
    Ashutosh.

  • Import/Export wizard auto-generates all columns as DATE

    Hi
    I'm trying to use the Import/Export Wizard as I used to, as a handy tool to figure out what a series of T-SQL statements (in an SSIS package) is doing - or, if I'm lucky, what on earth the original dev
    intended them to do.
    Version: SQL 2014 64-bit running on Win 7 64-bit
    The code is pretty dreadful:
    SELECT DISTINCT on one set of column names,
    join this set to another table but not on exactly the same set of column names,
    embedded (SELECT MAX(bla) FROM SameTable WHERE [match to outer set on another set of columns] GROUP BY [hey, yet another set of columns!]) inside the SELECT column list...
    and it all goes to a nasty #Tmp, which is then abused with further bad code further down.
    Imp/Exp is always handy to quickly get the intermediate results into an auto-created real table, so I can figure out exactly what the effect of this is.  I use it to export from the database back to the same database, but to a persisted table.
    This time (first time with SQL2014) it's not working.  The source is "write a query" (paste the actual query).  The destination I set to a new table.  The auto-generation of the new table creates every column as type
    date.  Not surprisingly, this doesn't work, as the original data is mostly not of
    date time.
    Looks like a bug.  Any idea of a workaround or fix?
    thanks!

    Sorry, but I think you're still not getting what I'm saying.
    This is not a production SSIS package design, but a quick'n'nasty diagnosis technique I'm used to using:
    - Find some SQL in an existing query/script that I'm trying to debug
    - Paste it into Import/Export wizard as a source
    - Wizard creates a new table for the result - I then have the results persisted for examination, comparison with the results from refactored code, etc.
    And I can't even put suitable CAST/CONVERT statements in, because the wizard is mis-identifying the
    input column data types, with no way to change them.   It's somehow thinking that every column in the input (the SQL query) is of type
    date(500), when the columns are obviously not of this type.

  • SQL Exoress 2008 import export Wizard wont import Access 2003 mdb to SQL 2008 DB

    Just installed SQL Express with Tools, including SSME and Import Export Wizard.
    Attempted to transfer Access 2003 DB tables from an mdb file to a SQL 2008 Express DB.
    I can view the data in the tables in Access, however, when I tell it to  do the deed, it begins the process and then errors out with a Error 0xc020801c:
    "TITLE: SQL Server Import and Export Wizard
    Could not connect source component.
    Error 0xc020801c: Source - ParentingStats [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
    ADDITIONAL INFORMATION:
    Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)"
    I am unable to find anything that translates this into something mere mortals can deal with.  This is repeatable.
    Steps in the wizard:
    1.  Source: Data Source selected is "Microsoft Access".  The filename is correct.  The username is correct.  The password is blank (there is no password in the Access db).  Clicking on the "Advanced..." button, I get the opportunity to "Test Connection".  I test the connection and the test is successful.
    2.  Destination: I select my server name and the SQL Native Client, select Windows Authentication, and Select my SQL 2008 Express db from the dropdown list.
    3.  Specify Tabloe Copy or Query: I select Table copy
    4.  Select Table or Views: I check the tables I want to copy and successfully preview the data in each table that I checked.  I click on "Edit Mappings ..." and verify that I want to create a new table for each checked table.
    5.  Run package: I accept the pre-checked "Run Immediately" and click the NEXT button
    6.  I get the following:
    "Source Location : C:\Users\wb5rvz\Documents\StatisticsApp_V3_69.mdb
    Source Provider : Microsoft.Jet.OLEDB.4.0
    Destination Location : SHACK_PC\SQLEXPRESS
    Destination Provider : SQLNCLI
    Copy rows from `ParentingStats` to [dbo].[ParentingStats]
    The new target table will be created.
    Copy rows from `Statistics` to [dbo].[Statistics]
    The new target table will be created.
    Copy rows from `StatsSummary` to [dbo].[StatsSummary]
    The new target table will be created.
    Copy rows from `Volunteers_Confidential` to [dbo].[Volunteers_Confidential]
    The new target table will be created.
    Copy rows from `YearMonthTbl` to [dbo].[YearMonthTbl]
    The new target table will be created.
    The package will not be saved.
    The package will be run immediately.
    Provider mapping file : c:\Program Files\Microsoft SQL Server\100\DTS\MappingFiles\JetToMSSql9.xml"
    7.  I click the FINISH button and I get
    "Initializing Data Tasks .... Success"
    "Initializing Connections ...Success"
    "Setting SQL Commend ....20% Compoete"
    "Setting Source Connection ...Error (and an error link)"
    (All following tasks were "Stopped"
    Error detail is:
    ===================================
    Could not connect source component.
    Error 0xc020801c: Source - ParentingStats [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
     (SQL Server Import and Export Wizard)
    ===================================
    Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
    Program Location:
       at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.AcquireConnections(Object pTransaction)
       at Microsoft.SqlServer.Dts.DtsWizard.Execute.SetSourceConnection(Exception& ex, TransformInfo ti)
    OS is Vista Home Premium SP1 (32 bit)
    Processor = Intel core 2 duo E7200 @ 2.5 GHz
    SQL Server Software was just downloaded yesterday, so it is whatever is current on the download site:
    SQL Express with Tools
    So, how do I get this transform to work?  I do not have nor do I want/afford to put Access 2003 on this machine.
    Thanks
    RRR

    I had this similar problem - 32-bit SQL Server 2005 trying to import tables from Access 2000 .mdb file, same error:
    Error 0xc020801c: Source - ParentingStats [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
     (SQL Server Import and Export Wizard)
    ===================================
    Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
    I know you said you clicked "Advanced..." and Test Connection when you chose your Access database - but that is what resolved the error for me.  I chose my .mdb file, username is admin, password is blank, but if I don't click the Advanced button and test the connection before continuing on, the import fails with above error message.  Go figure, since the username/blank password is correct. 
    FWIW, sorry if that doesn't help you though.

  • Import export wizard in struts similiar to microsoft outlook

    Hello All,
    A newbie here,I've been assigned a task creating an import/export wizard which is same as the wizard that is in the Microsoft outlook express(File >Import/Export Wizard),I was successful except for the mapping functionality.I'm clueless how to do it.My dead line is today end of the day.
    I need to do it in struts.I use exadel ide and code in java
    Any help in this direction would be greatly appreciated.
    pl take a look on this link http://www.microsoft.com/dynamics/crm/using/configure/outlookimport.mspx
    point number 8.*Map custom fields* .This part of the wizard is where I'm unable to implement.
    pl help me

    Hi Everybody,
    I'm in a very big prob...pl help me.All my attempts failed.I used javascripts,tigra scripts inside struts to make things work..any clue using java code will also help.I'm giving you the link again.
    pls check this link http://www.microsoft.com/dynamics/crm/using/configure/outlookimport.mspx
    pl extend ur support.

  • SQL Server Import Export Wizard fails while trying to retrieve the data from FastObjects Database

    When trying to import data from FastObjects database to SQL Server 2008 R2 using import/ export wizard we get the following error message :
    "Column information for the source and the destination data could not be retrieved, or the data types of source columns were not mapped correctly to those available on the destination provider."
    Clicked on View button, the source data is retrieved correctly.
    Clicked on Edit Mapping button, the Import Export Wizard failed with the below error message:
    ===================================
    Column information for the source and destination data could not be retrieved.
    "Test" -> [dbo].[Test]:
    - Cannot find column -1.
    (SQL Server Import and Export Wizard)
    ===================================
    Cannot find column -1. (System.Data) 
    at System.Data.DataColumnCollection.get_Item(Int32 index) at System.Data.DataRow.get_Item(Int32 columnIndex) at Microsoft.DataTransformationServices.Controls.ProviderInfos.MetadataLoader.LoadColumnsFromTable(IDbConnection myConnection, String[] strRestrictions)
    at Microsoft.SqlServer.Dts.DtsWizard.OLEDBHelpers.LoadColumnsFromTable(MetadataLoader metadataLoader, IDbConnection myConnection, String[] strRestrictions, DataSourceInfo dsi)at Microsoft.SqlServer.Dts.DtsWizard.TransformInfo.PopulateDbSourceColumnInfoFromDB(IDbConnection
    mySourceConnection) at Microsoft.SqlServer.Dts.DtsWizard.TransformInfo.PopulateDbSourceColumnInfo(IDbConnection mySourceConnection, ColumnInfoCollection& sourceColInfos)

    Hi Chennie,
    Thank you for the post.
    Does the issue persists after you use the "Write a query to specify the data to transfer" option instead of “Copy data from one or more tables or views” option? If so, the issue may occur due to incorrect data type matching between the FastObjects database
    data types and SSIS data types. In this condition, I don’t think it is necessary to upgrade the SQL Server version. Since you can open the Column Mappings dialog box, please try to modify the data type mapping manually.
    In addition, the issue seems to be the same as the issue described in the following blog:
    http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/09/09/sql-server-import-export-wizard-fails-while-trying-to-retrieve-the-data-from-pervasive-database.aspx 
    Regards,
    Mike Yin
    TechNet Community Support

  • Exporting HumanResources.Jobcandidate with SS Import/Export Wizard

    The default mapping results in execution errors.
    What is the correct setup for exporting the table to flat file from AdventureWorks2012?   Thanks.
    Kalman Toth Database & OLAP Architect
    SQL Server 2014 Design & Programming
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

    The table has an XML column.
    CREATE TABLE [HumanResources].[JobCandidate](
    [JobCandidateID] [int] IDENTITY(1,1) NOT NULL,
    [BusinessEntityID] [int] NULL,
    [Resume] [xml](CONTENT [HumanResources].[HRResumeSchemaCollection]) NULL,
    [ModifiedDate] [datetime] NOT NULL CONSTRAINT [DF_JobCandidate_ModifiedDate] DEFAULT (getdate()))
    Errors:
    - Pre-execute (Error)
    Messages
    Error 0xc020802e: Data Flow Task 1: The data type for "Destination - Candidate_csv.Inputs[Flat File Destination Input].Columns[Resume]" is DT_NTEXT, which is not supported with ANSI files. Use DT_TEXT instead and convert the data to DT_NTEXT using the data conversion component.
    (SQL Server Import and Export Wizard)
    Error 0xc0202094: Data Flow Task 1: Unable to retrieve column information from the flat file connection manager.
    (SQL Server Import and Export Wizard)
    Error 0xc004701a: Data Flow Task 1: Destination - Candidate_csv failed the pre-execute phase and returned error code 0xC0202094.
    (SQL Server Import and Export Wizard)
    Mapping:
    Kalman Toth Database & OLAP Architect
    SQL Server 2014 Design & Programming
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • SQL server 2012 Import and Export Wizard missing Flat File Options

     When using either the 32 or 64 bit Import & Export wizard selecting   data source "flat file source" no options appear,  compared to excel import , sql or another data source ? tried uninstalling etc, build a VM 2008
    Server works fine options appear. Any sugguestions before I rebuild my laptop ?
    Stage that the Next button is optional, (usually greyed out)
    TITLE: SQL Server Import and Export Wizard
    The operation could not be completed.
    ADDITIONAL INFORMATION:
    The server name is not specified. (DTSWizard)
    BUTTONS:
    OK
    Microsoft.SqlServer.Management.UI.WizardFrameworkErrorSR 

    Hi mtech,
    When I open Import and Export Data(64-bit), I choose “flat file source”.
    Maybe you could try to reinstall it.
    If you have any feedback on our support, please click
    here.
    Thanks.
    Maggie Luo
    TechNet Community Support

  • SQL Server Import and Export Wizard Issue

    i am trying to export SQL data into excel to send out weekly reports.  I have created a view and a SQL account has access to this view; however, I am unable to successfully export the data.  In preview I see all of the data yet it fails on the
    Pre-execute with the below.  It creates the excel file with just the header.  I am using SQL 2014 and loaded the 64 bit AccessDatabaseengine.  I am selecting excel 2007.  Any ideas welcome.
    Messages
    Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80040E37.
     (SQL Server Import and Export Wizard)
    Error 0xc02020e8: Data Flow Task 1: Opening a rowset for "WeeklyList" failed. Check that the object exists in the database.
     (SQL Server Import and Export Wizard)
    Error 0xc004701a: Data Flow Task 1: Destination - WeeklyList failed the pre-execute phase and returned error code 0xC02020E8.
     (SQL Server Import and Export Wizard)

    Hi astro,
    Please ensure that you haven’t renamed or moved the destination excel file during the exporting process. Also make sure that “Create destination table” option is checked as below screenshot and the SQL statement is correct.
    For more details about using SQL Server Import/Export Wizard to export data from a SQL Server database to an Excel spreadsheet, please review the below blog.
    http://www.mssqltips.com/sqlservertutorial/202/simple-way-to-export-data-from-sql-server/
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • Error message using SQL import and Export Wizard with Excel spread sheet

    I am trying to import an Excel spreadsheet using the Import export wizard that is provided with SQL 2014.  
    Everything seems to set up OK but then when I go to do the transfer "error message" comes up saying:
    External Table is not in the expected format.(Microsoft Jet Database Engine).   
    This is a spreadsheet and there is no database, that is why I want to import it into a database!!  So the reference to JET is a tad disappointing.
    So why the error and how do I fix the problem?
    As there are over 100 variables in the spread sheet rows, it would be great to have this automatically create the database and populate the fields.
    I am using SQL 2014  Express and Office Excel 2013.
    Thank you in  advance for taking the time to read this, and hopefully sheading some light on the issue.

    Hi AWlcurrent,
    When import a .xlsx file to SQL Server using SQL Server Import and Export Wizard, you see a “External Table is not in the expected format.(Microsoft Jet Database Engine).” error message. This error message seems that the Microsoft JET Database Engine is
    unable to handle something that is contained in the file.
    So please make sure there is no unsupported content in the Excel file. Alternatively, we can use ‘Microsoft Excel’ as the Data Source, then Select ‘Microsoft Excel 2007’ as the Excel version to import the excel file.
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • Issue while importing table from oracle to sql server using import and export wizard

    Hi All,
    I am trying to populate oracle table to sql server using import export wizard  and i am getting the below error.the table is allready present in the database but still it throwing error like table doesn't exists.
    Could not connect source component.
    Error 0xc0202009: Source - JOB_ACTION_HISTORY [1]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    Error 0xc02020e8: Source - JOB_ACTION_HISTORY [1]: Opening a rowset for ""FLXUSER"."JOB_ACTION_HISTORY"" failed. Check that the object exists in the database.
     (SQL Server Import and Export Wizard)
    Kindly help me out
    Thanks in advance

    Hi Snehasis,
    Please check whether the table name in the Oracle database has lower case letters. The table name should be exactly correct. 
    In addition, the issue might be related to the Oracle driver. What provider/driver do you use? If you use Microsoft OLE DB Provider for Oracle, you can try the
    Oracle OLE DB Provider. If you use Enterprise or Developer edition of SSIS 2008 or higher, you can also try the
    Microsoft Connectors for Oracle by Attunity. The  Oracle OLE DB Provider and Microsoft Connectors for Oracle are proved to have better performance.
    Regards,
    Mike Yin
    TechNet Community Support

  • Drivers for Import and Export Wizard

    How do I load the drivers for adding Excel and Access to the Data Sources options in the Import Export wizard?

    Hello,
    The wizard will show up all installed OleDB data provider, so install the provider (as 32 bit!!!) =>
    Microsoft Access Database Engine 2010 Redistributable
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Error when exporting to xslx using export wizard or SSIS package

    Greetings:
    SQL Server 2008 R2, SSMS version 10.50.2500.0
    I tried to use the import/export wizard to create a SSIS package that takes the results of a query and outputs to an excel file. 
    Here is the table it is deriving from:
    CREATE TABLE OrderTravOutput (
    TravelerID int
    ,FirstName varchar(255)
    ,LastName varchar(255)
    ,Email varchar(255)
    ,Email2 varchar(255)
    ,Cell varchar(255)
    ,OrderID varchar(255)
    ,OrderSkillSet varchar(255)
    ,FacilityName varchar(255)
    ,City varchar(255)
    ,StateProvinceID varchar(255)
    ,ParentID int
    ,HealthSystem varchar(255)
    ,UnitName varchar(255)
    ,LastContact datetime
    ,OrderStart datetime
    ,OrderEnd datetime
    ,Tag varchar(255)
    ,CompleteDate datetime
    ,Recruiter varchar(255)
    ,Brand varchar(255)
    ,RecruiterEmail varchar(255)
    ,NumberOfWeeks int
    ,OrderShifts varchar(255)
    ,MaxPayrate varchar(255)
    ,FileOut int
    ,JobDescription varchar(max)
    ,RequiredQualifications varchar(max)
    ,PreferredQualifications varchar(max))
    Here is the query being used in the wizard:
    select DISTINCT r2.*
    from OrderTravOutput r2
    JOIN OrderTravOutput r3 ON r2.OrderID = r3.OrderID
    AND r2.CompleteDate = (SELECT max(CompleteDate)
    FROM OrderTravOutput
    WHERE OrderID = r2.OrderID
    AND TravelerID = r2.TravelerID
    AND r2.OrderSkillSet = ( SELECT TOP 1 OrderSkillSet
    FROM OrderTravOutput
    WHERE OrderID = r2.OrderID
    AND TravelerID = r2.TravelerID)
    When I run it, it fails. Here is the report:
    Operation stopped...
    - Initializing Data Flow Task (Success)
    - Initializing Connections (Success)
    - Setting SQL Command (Success)
    - Setting Source Connection (Success)
    - Setting Destination Connection (Success)
    - Validating (Success)
    - Saving (Success)
    - Prepare for Execute (Success)
    - Pre-execute (Error)
    Messages
    * Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
    (SQL Server Import and Export Wizard)
    * Error 0xc0202025: Data Flow Task 1: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
    (SQL Server Import and Export Wizard)
    * Error 0xc004701a: Data Flow Task 1: component "Destination - Query" (103) failed the pre-execute phase and returned error code 0xC0202025.
    (SQL Server Import and Export Wizard)
    - Executing (Warning)
    Messages
    * Warning: Preparation SQL Task 1: Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done. (SQL Server Import and Export Wizard)
    * Warning: Preparation SQL Task 1: Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done. (SQL Server Import and Export Wizard)
    - Copying to `Query` (Stopped)
    - Post-execute (Stopped)
    Messages
    * Information 0x4004300b: Data Flow Task 1: "component "Destination - Query" (103)" wrote 0 rows.
    (SQL Server Import and Export Wizard)
    What did I do wrong?
    Thanks for any help. 

    I see some possible problems with the query.  Does it return expected results when executed in the Query window in SQL Server Management Studio (SSMS)?
    1.  You will want to specify fields explicitly in the select list, rather than using "*"
    2.  You will want to add r3 and r4 aliases in the subqueries, because OrderTravOutput r2 and r3 are definitely in scope there, and specifying an unqualified "OrderID" in the join condition would be ambiguous.
    3.  Add an ORDER BY clause to the second subquery, because otherwise TOP 1 OrderSkillSet is meaningless.
    4.  The intersection of these two subqueries may exclude records you want to see.  For example, you might have 20 records for a particular combination of OrderID and TravelerID.  But if one of those records has
    the MAX(CompleteDate) and a different record has the TOP 1 OrderSkillSet, the query will return zero records for this OrderID and TravelerID, because there is no single record that satisfies both conditions.  Is this what you intend?  Running the
    query first in SSMS helps to clarify whether it is returning the expected results.
    Anyway, you could start with something like this version of the query:
    SELECT DISTINCT r2.TravelerID,
    r2.FirstName,
    r2.LastName,
    r2.Email
    FROM OrderTravOutput r2
    JOIN OrderTravOutput r3 ON r2.OrderID = r3.OrderID
    AND r2.CompleteDate = (SELECT MAX(CompleteDate)
    FROM OrderTravOutput r3
    WHERE r3.OrderID = r2.OrderID
    AND r3.TravelerID = r2.TravelerID)
    AND r2.OrderSkillSet = (SELECT TOP 1 OrderSkillSet
    FROM OrderTravOutput r4
    WHERE r4.OrderID = r2.OrderID
    AND r4.TravelerID = r2.TravelerID
    ORDER BY r4.OrderSkillSet)

  • Import export in different encoding

    Is there a way to change an Import/Export Wizard's output in UTF encoding. Please help.

    please check this:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/fef48cda-dfb9-456e-9a54-ec2d989a47c3/output-utf8-file?forum=sqlexpress

Maybe you are looking for

  • Problem with Http RFC Scenario

    hi all.........      Am doing an HTTP RFC scenario. The scenario is working fine with all messages in IS, IE and AE being successful. But the problem is the RFC response am getting is not what is expected. When i run the RFC directly with the same in

  • Load Balancing of 2-Tiered vs 3-Tiered Clustering

    Hi,           I was looking at the cluster diagrams on the clustering page:           http://www.weblogic.com/docs60/cluster/index.html           And I can't help notice a slight descrepency between the diagram of a 2-Tier           cluster (WL web c

  • 10.3.9 Upgrading?

    Hello, I have just got my first mac its a powermac g4 733 40gb, 1.5gb of ram and i love it! But i want to install CS5 on it and other programs but it needs updating. What's the best way about upgrading? Thanks

  • Actual Costing - CKME update in group and local currency - split

    Hi Experts, We are using Actual Costing and running CKMLCP and CKME to update our standard price, in local currency and in group currency. The result it is one PR accounting document, with group currency and local currency booked in it. Now, we have

  • Sum Account based on first 3 Characters of member name

    In ASO I am trying to sum a group of accounts that all start with 460???_SUS. Any suggestions are appreciated.