Import issue - folder view not refreshing

I found this old thread https://discussions.apple.com/message/3316449#3316449 that describes the problem I am having. The solution was to go into terminal but I don't know how to do that. Can someone please walk me thru it? Thanks a bunch!!!

Nevermind - I think I figured out the issue. Thanks anyway!

Similar Messages

Import issue - folders view not refreshing

All,
I have a peculiar issue, a disk which I process some images on was recently rebuilt and in Aperture it still shows the old disk folder structure. The disk is a RAID array and I can't figure out why the old folders still show. The main issue is that new folders I have created are not visible.
Any ideas?

Aperture shows what I would call disk folder structure, I press import icon or shortcut to import, a pane opens with source disks I can select from, which I navigate through. The data held there is not correct, it seems to have held onto disks that I no longer have attached and within disks it holds onto old folders, which don't exist anymore. This only started happening after the 1.5 upgrade, so there must be some cache somewhere not being emptied.

Matrialized view not refreshing all records from source.

My materialized view is not refreshing a fixed number of rows i.e 198 every time from source to target.What are the reasons for such behavior. Also what should i do to resolve this discrepancy.
My mv is a FAST REFRESH ON DEMAND based on ROWID.
It has a simple sql query select col1,col2,col3 from testschema.mytable@mydb;
Thanks,
Sandesh

Hello Raman & KV,
Thanks for your Suggestions.
Unfortunately, I would not be able to implement any of your suggestions because, I m not allowed to change the DTP Settings.
So, I m working on finding the root cause of this issue and came across a SAP Note - 1506944 - Only one package is always extracted during direct access , which says this is a Program Error.
Hence, i m checking more with SAP on this and will share their insights once i hear back from them.
Cheers
Shiva

NWDS view not refreshing after changes in layout

Hello experts..
I'm using NWDS 7.0.13 and every time I'm modifiying a webdynpro view in layout mode the view does not refresh, instead I get this message:
This program cannot display the webpage
   Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
     Check your Internet connection. Try visiting another website to make sure you are connected.
     Retype the address.
     Go back to the previous page.
     More information
In order to display the changes I have made, I have to close the WD View and re open it, the funny thing is my other team mates can change their views and see their changes inmediately without closing/opening the view.. hope anybody can help me out on this one..
Thanx in advance..
JV

Jesus,
Do you have IE7 on your machine?? IE7 with a certain patch causes this issue.
Check this thread for more details
Probblems Net Weaver Developer Studio (NWDS) caused by Internet Explorer 7
Chintan

Materialized View Not Refreshing

Hello,
I have a materialized view that is not refreshing. I tried to set it to refresh it every 24 hours by specifying the following:
REFRESH COMPLETE START WITH sysdate+0 NEXT sysdate+1
The database modified it to be:
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT sysdate+1
I'm not sure why this materialized view is not being refreshed. Here is the full DDL for the view:
CREATE MATERIALIZED VIEW "MBMMASTER"."CLINIDXINVTRANSDATA"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS NOLOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "FAC_DATA"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT sysdate+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS SELECT
IIT.Group_ZZ as IDXGroupKey
, IIT.Prov as IDXProviderKey
, IIT.U_Second_Phys as IDXSecondaryProviderKey
, IIT.Div as IDXDivisionKey
, IIT.Loc as IDXLocationKey
, IIT.Billing_Area as IDXBillingAreaKey
, IIT.Proc as IDXProcedureKey
, IIT.Post_pd as IDXPostPeriod
, Max(CASE
WHEN SIBP.FacultyPK is Null Then PIBP.FacultyPK
WHEN EXISTS (
SELECT *
FROM FacultyAdmin.FacAdmAppointment APP
WHERE SIBP.FacultyPK = APP.FacultyPK
AND APP.AdmApptTypePK = 'APT0001021' /* MidLevel Track */
AND APP.AdmRankListPK = 'RKL0001141' /* MidLevel Rank */
AND IIT.SER_DT BETWEEN APP.AdmApptStartDate AND NVL(APP.AdmApptEndDate,IIT.SER_DT)
) THEN SIBP.FacultyPK
ELSE PIBP.FacultyPK
END) AS FacultyPK
, SUM(IIT.RVU
) as IDXRVU
, SUM(
CASE
WHEN Sign(IIT.RVU) = Sign(IIT.RVU_WORK_COMP) THEN IIT.RVU_WORK_COMP
ELSE IIT.RVU_WORK_COMP * -1
END
) as IDXWorkRVU
, SUM(
CASE
WHEN Sign(IIT.RVU) = Sign(IIT.RVU_EXPENSE_COMP) THEN IIT.RVU_EXPENSE_COMP
ELSE IIT.RVU_EXPENSE_COMP * -1
END
) as IDXExpenseRVU
, SUM(
CASE
WHEN Sign(IIT.RVU) = Sign(IIT.RVU_MALPRATICE_COMP) THEN IIT.RVU_MALPRATICE_COMP
ELSE IIT.RVU_MALPRATICE_COMP * -1
END
) as IDXMalpracticeRVU
FROM IDXInvTrans@DW IIT
, FacultyMaster.FacIDXBARProvider PIBP
, FacultyMaster.FacIDXBARProvider SIBP
where IIT.Prov = PIBP.IDXBARProviderKey
AND IIT.U_Second_Phys = SIBP.IDXBARProviderKey(+)
AND IIT.pay_code_num = 99
AND IIT.Post_Pd >= 10101
GROUP BY
IIT.Group_ZZ
, IIT.Prov
, IIT.U_Second_Phys
, IIT.Div
, IIT.Loc
, IIT.Billing_Area
, IIT.Proc
, IIT.Post_pd;
Thanks in advance,
Chris

I had quite similar problem/question. And un/fortunately answered it by myself, nobody was interested in help :)
For the first sight: two "concurrent" statements have been used: ON DEMAND and START WITH. I wonder why database changed good code.
Look into my topic: How to recreate materialized view and maintain priviledges?
Look also here: Re: error on "CREATE MATERIALIZED VIEW" for more details.
HTH, Rev

Issue : Child view object refresh problem,

Hi ,
Child view object refresh problem,
Detail expaination of problem with DEPT and Emp table:
I have two pages first.jspx and secound.jspx
In the First page we are showing one department and All Employee blongs to that department. Employees are shown in table format.
and i have duplicate button in table--> this will create a duplication record of selected employee by calling application module
and the control moves to sencound page to show the newly created Employee details.
From secound form am returning back with some action button to previous page to the same dept , The newly created records are not showing in the table [but the database has newly crated].
How do i refresh the child view object ?
Regards,
Bogi.

Hi Frank,
We are creating new record from the AM with help of ADFBC.
Would like know how to refresh UI Datacollection and AM view objects.. ? i have added vo.executeQuery in AM . But the changes not reflecting in UI,
Thanks for the reply... am ready to give any other info required,,,

Content Viewer not refreshing, old folios disappeared

I wonder if anyone else is experiencing this and if this issue is related to some of the other download problem threads?
My clients contacted me that they were unable to see recent updates I made to our shared development folio. I was able to replicate this as my own folios have stopped updating since yesterday afternoon.
I deleted and re-installed the content viewer on my iPad, and since then all my previous folios fail to show up on the iPad.
I created a small folio, with a blank page, this does show up. However any updates with a bit of content in them appear to upload correctly, but the folios no longer refresh on the iPad.
Several clients also tried to either "archive" existing folios in the hope that they would subsequently refresh, or deleted the content viewer from their iPads with similar resuts to mine.
When starting the content viewer I coccasionally receive a message that says "Cannot contact server, an error has occurred"
Are other folks experiencing this?
Thanks, JB

OK, I figured out this was an orientation issue, related to a bug discussed in post:
http://forums.adobe.com/message/3831423#3831423
Apparently when uploading something like a 1024x4000 vertical smooth scrolling stacks, one must
a.) specify an _h filename postfix (makes sense)
b.) Do NOT use the "add" or "update" function of the folio producer tools, but instead use the "import" function for the file's orientation to be interpreted correctly (a work-around)
c.) After import, change the default orientation after importing a _h postfix file from horizontal only to "both" or "vertical"
Tx ,JB

Materialized Views Not Refreshing

I have created several materialized views and I am having a problem with them never refreshing even though their refresh times are specified in the create statement. Here is the SQL statement for one of them.
create MATERIALIZED view autonomy_mvw
     nocache
     logging
     noparallel
     build immediate
     refresh complete
     start with to_date(sysdate,'dd-mon-yyyy hh24:mi:ss')
     next sysdate + 18/24
as
     select c.contract_seq,
          c.contract_number contract,
cast('' as VARCHAR2(1)) contract_mod,
          cast('' as VARCHAR2(1)) do,
          cast('' as VARCHAR2(1)) do_seq,
          cast('' as VARCHAR2(1)) do_mod_number,
          c.contract_number co_do,
          c.contract_name title,
          c.contract_remarks description,
          c.contract_effective_date award_date,
          to_char(c.contract_performance_end_date) originalpop,
          to_char(cont_perform_end_date(c.contract_seq)) currentpop,
          c.control_group controlgroup,
          c.fiscal_year_execution fy,
c.quarter,
          nvl(CON_PENDING_ROLLUP_AMOUNT(c.contract_seq),0) pendingamt,
          nvl(CON_OBLIGATED_ROLLUP_AMOUNT(c.contract_seq),0) originalamt,
          cont_majcoms_comma(c.contract_seq) majcom,
cont_installations_desc_comma(c.contract_seq) installation,
          case pocPM.last_name || ', ' || pocPM.first_name || nvl2(pocPM.mi,' '||pocPM.mi,'') when ', ' then 'Not Assigned'
          else pocPM.last_name || ', ' || pocPM.first_name || nvl2(pocPM.mi,' '||pocPM.mi,'') end     pm,
          case pocCM.last_name || ', ' || pocCM.first_name || nvl2(pocCM.mi,' '||pocCM.mi,'') when ', ' then 'Not Assigned'
          else pocCM.last_name || ', ' || pocCM.first_name || nvl2(pocCM.mi,' '||pocCM.mi,'')     end cm,
          case pocBCO.last_name || ', ' || pocBCO.first_name || nvl2(pocBCO.mi,' '||pocBCO.mi,'') when ', ' then 'Not Assigned'
          else pocBCO.last_name || ', ' || pocBCO.first_name || nvl2(pocBCO.mi,' '||pocBCO.mi,'') end BCO,
          con.contractor_name contractor,
          c.contract_status status,
          cast('' as VARCHAR2(1)) active_status,
          nvl(c.prg_name,'Non Program') prg_name,
          c.funds_type fund_type,
          c.contract_instr_num
     from contract c,
          contractor con,
          cg_level cgl,
          poc_user_info pocPM,
          poc_user_info pocCM,
          poc_user_info pocBCO
     where c.contractor_number = con.contractor_number
     and c.control_group = cgl.control_group(+)
     and c.pm_seq = pocPM.poc_user_seq(+)
     and c.cm_seq = pocCM.poc_user_seq(+)
     and c.bco_seq = pocBCO.poc_user_seq(+)
     and c.contract_instr_num <> 'D'
     and c.contract_status in ('AC', 'NEW')
     union
     select c.contract_seq,
          c.contract_number contract,
          cmod.contract_mod_num contract_mod,
          cast('' as VARCHAR2(1)) do,
          cast('' as VARCHAR2(1)) do_seq,
          cast('' as VARCHAR2(1)) do_mod_number,
          c.contract_number||'/'||cmod.contract_mod_num co_do,
          c.contract_name title,
          c.contract_remarks description,
          c.contract_effective_date award_date,
          to_char(c.contract_performance_end_date) originalpop,
          to_char(cont_perform_end_date(c.contract_seq)) currentpop,
          c.control_group controlgroup,
          cmod.fiscal_year_execution fy,
cmod.quarter,
          nvl(cmod.contract_mod_committed_amt,0) pendingamt,
          nvl(cmod.afcee_oblig_contract_mod_amt, 0) originalamt,
          cont_majcoms_comma(c.contract_seq) majcom,
          cont_installations_desc_comma(c.contract_seq) installation,
          case pocPM.last_name || ', ' || pocPM.first_name || nvl2(pocPM.mi,' '||pocPM.mi,'') when ', ' then 'Not Assigned'
          else pocPM.last_name || ', ' || pocPM.first_name || nvl2(pocPM.mi,' '||pocPM.mi,'') end pm,
          case pocCM.last_name || ', ' || pocCM.first_name || nvl2(pocCM.mi,' '||pocCM.mi,'') when ', ' then 'Not Assigned'
          else pocCM.last_name || ', ' || pocCM.first_name || nvl2(pocCM.mi,' '||pocCM.mi,'') end cm,
          case pocBCO.last_name || ', ' || pocBCO.first_name || nvl2(pocBCO.mi,' '||pocBCO.mi,'') when ', ' then 'Not Assigned'
          else pocBCO.last_name || ', ' || pocBCO.first_name || nvl2(pocBCO.mi,' '||pocBCO.mi,'') end BCO,
          con.contractor_name contractor,
          c.contract_status status,
          cast('' as VARCHAR2(1)) active_status,
          nvl(c.prg_name,'Non Program') prg_name,
          c.funds_type fund_type,
          c.contract_instr_num
     from contract c,
          contract_modification cmod,
          contractor con,
          cg_level cgl,
          poc_user_info pocPM,
          poc_user_info pocCM,
          poc_user_info pocBCO
     where c.contract_seq = cmod.contract_seq
     and c.contractor_number = con.contractor_number
     and c.control_group = cgl.control_group(+)
     and c.pm_seq = pocPM.poc_user_seq(+)
     and c.cm_seq = pocCM.poc_user_seq(+)
     and c.bco_seq = pocBCO.poc_user_seq(+)
     and c.contract_instr_num <> 'D'
     and c.contract_status in ('AC', 'NEW')
     union
     select c.contract_seq,
          c.contract_number contract,
          cast('' as VARCHAR2(1)) contract_mod,
          do.do_number do,
          to_char(do.do_seq) do_seq,
          cast('' as VARCHAR2(1)) do_mod,
          c.contract_number||'-'||do.do_number co_do,
          do.do_title title,
          do.do_description description,
          do.afcee_obligated_do_date award_date,
          to_char(do.do_end_date) originalpop,
     to_char(do_mod_end_date(do.do_seq)) currentpop,
          do.control_group controlgroup,
          do.fiscal_year_execution fy,
do.quarter,
          nvl(DO_PENDING_ROLLUP_AMOUNT(do.do_seq),0) pendingamt,
          nvl(DO_OBLIGATED_ROLLUP_AMOUNT(do.do_seq),0) originalamt,
do_majcoms_comma(do.do_seq, null) majcom,
do_installations_desc_comma(do.do_seq, null) installation,
          case pocPM.last_name || ', ' || pocPM.first_name || nvl2(pocPM.mi,' '||pocPM.mi,'') when ', ' then 'Not Assigned'
          else pocPM.last_name || ', ' || pocPM.first_name || nvl2(pocPM.mi,' '||pocPM.mi,'') end pm,
          case pocCM.last_name || ', ' || pocCM.first_name || nvl2(pocCM.mi,' '||pocCM.mi,'') when ', ' then 'Not Assigned'
          else pocCM.last_name || ', ' || pocCM.first_name || nvl2(pocCM.mi,' '||pocCM.mi,'') end cm,
          case pocBCO.last_name || ', ' || pocBCO.first_name || nvl2(pocBCO.mi,' '||pocBCO.mi,'') when ', ' then 'Not Assigned'
          else pocBCO.last_name || ', ' || pocBCO.first_name || nvl2(pocBCO.mi,' '||pocBCO.mi,'') end BCO,
          con.contractor_name contractor,
          do.do_status status,
          do.do_actv_status active_status,
          nvl(c.prg_name,'Non Program') prg_name,
          do_fundtypes_comma(do.do_seq,null) fund_type,
          c.contract_instr_num
     from delivery_order do,
          contract c,
          contractor con,
          cg_level cgl,
          poc_user_info pocPM,
          poc_user_info pocCM,
          poc_user_info pocBCO
     where do.contract_seq = c.contract_seq
     and c.contractor_number = con.contractor_number
     and do.control_group = cgl.control_group(+)
     and do.pm_seq = pocPM.poc_user_seq(+)
     and do.cm_seq = pocCM.poc_user_seq(+)
     and do.bco_seq = pocBCO.poc_user_seq(+)
     and do.do_status in ('CURR')
     and do.do_actv_status in ('RESV','ANTC','FORE','COMM','OBLG','FIN_INV')
     union
     select c.contract_seq,
          c.contract_number contract,
          ''contract_mod,
          do.do_number do,
          to_char(do.do_seq) do_seq,
          domod.do_mod_number do_mod,
          c.contract_number||'-'||do.do_number||'-'||domod.do_mod_number co_do,
          do.do_title title,
          domod.do_mod_description description,
          domod.afcee_obligated_do_mod_date award_date,
          to_char(do.do_end_date) originalpop,
to_char(do_mod_end_date(do.do_seq)) currentpop,
          domod.control_group controlgroup,
          domod.fiscal_year_execution fy,
domod.quarter,
          (nvl(domod.do_mod_committed_amount,0) + nvl(domod.reserved_amount,0)+ nvl(domod.anticipated_amount,0)
               + nvl(domod.forecasted_amount,0)) pendingamt,
          (nvl(domod.afcee_obligated_do_mod_amount, 0)) originalamt,
do_majcoms_comma(do.do_seq, domod.do_mod_number) majcom,
do_installations_desc_comma(do.do_seq, domod.do_mod_number) installation,
          case pocPM.last_name || ', ' || pocPM.first_name || nvl2(pocPM.mi,' '||pocPM.mi,'') when ', ' then 'Not Assigned'
          else pocPM.last_name || ', ' || pocPM.first_name || nvl2(pocPM.mi,' '||pocPM.mi,'') end pm,
          case pocCM.last_name || ', ' || pocCM.first_name || nvl2(pocCM.mi,' '||pocCM.mi,'') when ', ' then 'Not Assigned'
          else pocCM.last_name || ', ' || pocCM.first_name || nvl2(pocCM.mi,' '||pocCM.mi,'') end cm,
          case pocBCO.last_name || ', ' || pocBCO.first_name || nvl2(pocBCO.mi,' '||pocBCO.mi,'') when ', ' then 'Not Assigned'
          else pocBCO.last_name || ', ' || pocBCO.first_name || nvl2(pocBCO.mi,' '||pocBCO.mi,'') end BCO,
          con.contractor_name contractor,
          do.do_status status,
          do.do_actv_status active_status,
          nvl(c.prg_name,'Non Program') prg_name,
          do_fundtypes_comma(do.do_seq,domod.do_mod_number) fund_type,
          c.contract_instr_num
     from delivery_order do,
          delivery_order_modification domod,
          contract c,
          contractor con,
          cg_level cgl,
          poc_user_info pocPM,
          poc_user_info pocCM,
          poc_user_info pocBCO
     where do.do_seq = domod.do_seq
     and do.contract_seq = c.contract_seq
     and c.contractor_number = con.contractor_number
     and do.control_group = cgl.control_group(+)
     and do.pm_seq = pocPM.poc_user_seq(+)
     and do.cm_seq = pocCM.poc_user_seq(+)
     and do.bco_seq = pocBCO.poc_user_seq(+)
     and domod.do_mod_status in ('CURR')
     and domod.do_mod_actv_status in ('RESV','ANTC','FORE','COMM','OBLG','DEOBLG','FIN_INV');
As you can see, I cannot use the On Commit refresh method because I violate several of the requirements in order to use the On Commit refresh method. I do not have a materialized view logs.
I did the following select from all_mviews:
1 select
2 MVIEW_NAME,
3 UPDATABLE,
4 UPDATE_LOG,
5 REWRITE_ENABLED,
6 REWRITE_CAPABILITY,
7 REFRESH_MODE,
8 REFRESH_METHOD,
9 BUILD_MODE,
10 LAST_REFRESH_TYPE,
11 LAST_REFRESH_DATE,
12 STALENESS
13 from all_mviews
14* where mview_name = 'AUTONOMY_MVW'
MVIEW_NAME U UPDATE_LOG R REWRITE_C REFRES REFRESH_ BUILD_MOD LAST_REF LAST_REFR STALENESS
AUTONOMY_MVW N N NONE DEMAND COMPLETE IMMEDIATE COMPLETE 17-NOV-05 STALE
I then called the dbms_mview package to force a REFRESH on this view and then re-ran the above sql
MVIEW_NAME U UPDATE_LOG R REWRITE_C REFRES REFRESH_ BUILD_MOD LAST_REF LAST_REFR STALENESS
AUTONOMY_MVW N N NONE DEMAND COMPLETE IMMEDIATE COMPLETE 04-MAY-06 STALE
I noticed that while it was refreshed it shows as stale.
How do I get this materialized view (and my other ones) to refresh in a regular manner?
Thanks
Richard Anderson

Here is what I got when I ran the sql you provided. BTW, I increased the substr size for the "Command" to 70 so I could see the whole thing. I have 6 materialized views in this instance but one of them has a compile_state of "ERROR" and so it doesn't show in the job queue. All the others show up.
Job User Schem Last Date Next Date B Failed Command
9 MXT MXT 04.05.2006 16:55 04.05.2006 17:55 N 0 dbms_refresh.refresh('"MXT"."PMR_CON_DO_REPORT_MVW"');
51 MXT MXT 04.05.2006 16:55 04.05.2006 17:55 N 0 dbms_refresh.refresh('"MXT"."MIEN_FY_MV"');
4 MXT MXT 04.05.2006 16:55 04.05.2006 17:55 N 0 dbms_refresh.refresh('"MXT"."PMR_ALL_STATUS_AMT_REPORT_MVW"');
7 MXT MXT 04.05.2006 16:55 04.05.2006 17:55 N 0 dbms_refresh.refresh('"MXT"."PMR_AMOUNT_REPORT_MVW"');
31 MXT MXT 04.05.2006 16:58 04.05.2006 17:28 N 0 dbms_refresh.refresh('"MXT"."PMR_TEST_MVW"');
Rick Anderson
PS, this list was run on my DEV server so it doesn't have the AUTONOMY_MVW at all but both my DEV and PROD instances are having the same issues.
I downloaded Oracle SQL Developer and used it to look at the materialized views and they have a details tab which contained the following:
"Name"     "Value"
"OWNER"     "MXT"
"MVIEW_NAME"     "PMR_AMOUNT_REPORT_MVW"
"CONTAINER_NAME"     "PMR_AMOUNT_REPORT_MVW"
"QUERY_LEN"     "31020"
"UPDATABLE"     "N"
"UPDATE_LOG"     ""
"MASTER_ROLLBACK_SEG"     ""
"MASTER_LINK"     ""
"REWRITE_ENABLED"     "N"
"REWRITE_CAPABILITY"     "NONE"
"REFRESH_MODE"     "DEMAND"
"REFRESH_METHOD"     "COMPLETE"
"BUILD_MODE"     "IMMEDIATE"
"FAST_REFRESHABLE"     "NO"
"LAST_REFRESH_TYPE"     "COMPLETE"
"LAST_REFRESH_DATE"     "04-MAY-06"
"STALENESS"     "UNKNOWN"
"AFTER_FAST_REFRESH"     "NA"
"UNKNOWN_PREBUILT"     "N"
"UNKNOWN_PLSQL_FUNC"     "Y"
"UNKNOWN_EXTERNAL_TABLE"     "N"
"UNKNOWN_CONSIDER_FRESH"     "N"
"UNKNOWN_IMPORT"     "N"
"COMPILE_STATE"     "VALID"
"USE_NO_INDEX"     "N"
Message was edited by:
RichardAnderson

IMPORT ISSUE: LR 5 NOT SHOWING ANY PICTURES FROM ANY FOLDERS ON IMPORT

Hi there I am using LR5 on Macbook pro OSX vs 10.9.5. I am attempting to import photos from a folder on my hard drive. I cannot get LR5 to recognise any photographs in the folder. Indeed it will not recognise any photographs in any of my system folders or on my external drive. I have checked for XMP files as I heard they can be a conflict but there are none in my folders. I have attempted importing via different methods including drag and drop onto the LR icon but to no avail. This is confusing as all was working fine until recently. I am in desperate need to get this fixed as I am on a shoot tomorrow and need LR! Please can anyone help? Many thanks Steve Please see a screengrab below.

OK...very strange. I had the 'Destinations' tab collapsed. When I clicked to expand it the photos suddenly showed up!
I was attempting to 'Add' photos before (in which case the Destinations is irrelevant) In ''Copy'' or 'Move' the destinations seems to want to be expanded as a tab. Now when I go back into 'Add' the picture imports are working. Thanks for your help and I hope that this might help someone else.

Outlook 2010 PST Import issue: ".pst is not an Outlook data file (.pst)"

I recently installed the Office 2010 Beta and am attempting to import my old .PST files from Outlook 2007. However, every time I try it I get the error, ".pst is not an Outlook data file (.pst)". The two data files are large (2+ GB in size each) but have been working fine with Outlook 2007. Steps to repro are:
1. In Outlook 2010, click the File tab.
2. Click Open and then click Open Outlook Data File.
3. Navigate to the .pst file to import and then click Ok.
When I click "open Outlook data file" I get the error "the file Outlook.pst is not an outlook data file (.pst).
I've seen at least one other person post this question on another forum... Any help you can provide would be fantastic as I have a lot of history (obviously ;-) tied up those files.
Thanks!

Hi TylerThrasher,
I'm having the same problem, you described above about my pst file "not an outlook personal
folder file (.pst)..".
Tried all the solutions metionned in this forum but no way unfortunately.
The last thing that I didn't try yet is this recovery tool "Advanced
Outlook Repair 3.4"
which I'm not able to find on internet at all !!!
Really
I need your help as this pst file, will save my life... I got fired by my company for a no sens problem. Now I will start a justice process and all my evidences are inside my emails which are blocked inside this file.
Really, will appreciate your help if you can as you already solved your problem.
Thanks you in advance
Loubna

Import Issue ADC is not flowing & Base amount is wrong

Hi,
I am getting problem in Import procedure.
We created Import Purchase order as normal means Main Vendor in Foreign Currency and Customs Vendor in Indian Currency. We assigned same in PO.
After creating PO we did Customs MIRO in Indian Currency.
I am not getting the Value, which I had entered, in MIRO.
1. My base is coming wrong (So the BED,ECS,SHECS is coming Wrong)
2. ADC isn't flowing.
Import pricing I have takne JADC & in Excise default I have maintained the condition also.
In MIGO we entered Customs invoice Number. We are mentioned Excise default settings. We are using TAXINN.In my Import Pricing Procedure I have assigned Account key and accruals.
Biswajit

ADC will be captured in (RG23A) AED field of excise invoicce.
So we need to maintain account determingation for RG23A AED at sutransaction level-IP.
If you do this, the value will flow,
regards
Prasad

IPhoto '06 - '08 Import Issues: Album Names Not Imported; Grouped by Date

I imagine my circumstances aren't uncommon... After a clean install of Leopard and iLife '08 on my MacBook, I wanted to import my iPhoto '06 library into iPhoto '08. I had archived on an external hard drive the iPhoto Pictures directory from iPhoto '06 (the directory from ~user/Documents/Pictures/iPhoto Pictures/).
Using the File>Import to Library function in iPhoto '08 and selecting the iPhoto '06 library resulted in all of the pictures coming in, *but they weren't organized in the albums I created in iPhoto '06*. Instead, all pictures were organized into groups by date.
What in the ham sandwich is the proper way to import an iPhoto '06 library so that all of the old album names and organization is maintained in iPhoto '08?
Many thanks for your time!

TD,
Many thanks for the advice. I found one other thing that I wanted to ask about before giving this a whirl.
I noticed that the iPhoto Library in '08 is in fact a package, not a directory. Given that, there are two possible courses of action, and I wanted to know which was best.
1. Delete the iPhoto '08 "iPhoto Library" package and replace it with the '06 "iPhoto Library" directory.
2. Replace the contents of the '08 "iPhoto Library" package with the contents of the '06 "iPhoto Library" directory?
I was uncertain about option 1, as I didn't know how getting rid of the package would affect the application (or if it's needed).
Cheers,
R

LR5 Import Issue: Photos do not show in import window

When trying to import CR2/JPEG files into LR5, the import window shows the file folders empty even though I can see the files in windows explorer. I've also importing them from different locations (From the camera, memory card, hard drive) and still shows up blank. The kicker is I can open/import them through canon DPP and LR 4.4.
Here are some specifics of my system:
Tested on Windows 7 64bit
Running administrative account with no permission issues
I've uninstalled/installed LR5 several times which didn't resolve the issue
I've tried importing an upgrade of my existing LR4.4 catalog and also with a new catalog.
I created a video that captures my normal workflow. As you can see, LR5 cannot see any of the photos (CR2 and JPG) from the memory card or hard drive but LR4.4 can see them both with no issues. Any help would be great.

I don't read that you have atttempted to reset your preference file. That would be my next troubleshooting step. http://www.lightroomforums.net/showthread.php?14226-Resetting-(or-Trashing-)-the-Lightroom -Preferences-file

In my system preferences, my sharing folder will not let me access it. All my photo booth share button is grayed out. One more thing, My photoshop will not let me import any photographs. I believe this all has to do with this. Any way to fix this issue?

In my system preferences, my sharing folder will not let me access it. All my photo booth share button is grayed out. One more thing, My photoshop will not let me import any photographs. I believe this all has to do with this. Any way to fix this issue?

The iTunes Store has no phone support and never has. Contacting them has always been via web form. Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

Folders open without toolbars, windows to not refresh, other issues

I am having a problem on my Mac G5 Dual 2GHz, it is running OS 10.4.11
For the past few days when ever I open certain folders on our network volumes the finder windows always open without a toolbar and there are a variety of problems with these folders. When I scroll or open a subfolder that folder doesn't refresh or gets all fragmented (visually) like there are thirty little copies of the folder on top of each other. If I close the window or change the view it corrects itself. Also if I navigate to said folders in a program (InDesign) it sometimes crashes the program.
Our network has not changed in anyway, the only new thing in our office is that a few computers started using Leopard.
Our network is using xinet, appletalk, various Dell servers running NT.
Any guesses what is going on?

Hi jhc13, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, move these files to the Desktop.
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
Or we could try deleting those silly hidden DS_Store files first...
http://www.macupdate.com/info.php/id/10478

Import issue - folder view not refreshing

Similar Messages

Maybe you are looking for